Communication middleware for the future mobile internet

A evolução constante em novas tecnologias que providenciam suporte à forma como os nossos dispositivos se ligam, bem como a forma como utilizamos diferentes capacidades e serviços on-line, criou um conjunto sem precedentes de novos desafios que motivam o desenvolvimento de uma recente área de investigação, denominada de Internet Futura. Nesta nova área de investigação, novos aspectos arquiteturais estão ser desenvolvidos, os quais, através da re-estruturação de componentes nucleares subjacentesa que compõem a Internet, progride-a de uma forma capaz de não são fazer face a estes novos desafios, mas também de a preparar para os desafios de amanhã. Aspectos chave pertencendo a este conjunto de desafios são os ambientes de rede heterogéneos compostos por diferentes tipos de redes de acesso, a cada vez maior mudança do tráfego peer-to-peer (P2P) como o tipo de tráfego mais utilizado na Internet, a orquestração de cenários da Internet das Coisas (IoT) que exploram mecanismos de interação Maquinaa-Maquina (M2M), e a utilização de mechanismos centrados na informação (ICN). Esta tese apresenta uma nova arquitetura capaz de simultaneamente fazer face a estes desafios, evoluindo os procedimentos de conectividade e entidades envolvidas, através da adição de uma camada de middleware, que age como um mecanismo de gestão de controlo avançado. Este mecanismo de gestão de controlo aproxima as entidades de alto nível (tais como serviços, aplicações, entidades de gestão de mobilidade, operações de encaminhamento, etc.) com as componentes das camadas de baixo nível (por exemplo, camadas de ligação, sensores e atuadores), permitindo uma otimização conjunta dos procedimentos de ligação subjacentes. Os resultados obtidos não só sublinham a flexibilidade dos mecanismos que compoem a arquitetura, mas também a sua capacidade de providenciar aumentos de performance quando comparados com outras soluÇÕes de funcionamento especÍfico, enquanto permite um maior leque de cenáios e aplicações.

Nanofluids development and characterization for heat exchanging intensification

A desmaterialização da economia é um dos caminhos para a promoção do desenvolvimento sustentável na medida em que elimina ou reduz a utilização de recursos naturais, fazendo mais com menos. A intensificação dos processos tecnológicos é uma forma de desmaterializar a economia. Sistemas mais compactos e mais eficientes consomem menos recursos. No caso concreto dos sistemas envolvendo processo de troca de calor, a intensificação resulta na redução da área de permuta e da quantidade de fluido de trabalho, o que para além de outra vantagem que possa apresentar decorrentes da miniaturização, é um contributo inegável para a sustentabilidade da sociedade através do desenvolvimento científico e tecnológico. O desenvolvimento de nanofluidos surge no sentido de dar resposta a estes tipo de desafios da sociedade moderna, contribuindo para a inovação de produtos e sistemas, dando resposta a problemas colocados ao nível das ciências de base. A literatura é unânime na identificação do seu potencial como fluidos de permuta, dada a sua elevada condutividade, no entanto a falta de rigor subjacente às técnicas de preparação dos mesmos, assim como de um conhecimento sistemático das suas propriedades físicas suportado por modelos físico-matemáticos devidamente validados levam a que a operacionalização industrial esteja longe de ser concretizável. Neste trabalho, estudou-se de forma sistemática a condutividade térmica de nanofluidos de base aquosa aditivados com nanotubos de carbono, tendo em vista a identificação dos mecanismos físicos responsáveis pela condução de calor no fluido e o desenvolvimento de um modelo geral que permita com segurança determinar esta propriedade com o rigor requerido ao nível da engenharia. Para o efeito apresentam-se métodos para uma preparação rigorosa e reprodutível deste tipo de nanofluido assim como das metodologias consideradas mais importantes para a aferição da sua estabilidade, assegurando deste modo o rigor da técnica da sua produção. A estabilidade coloidal é estabelecida de forma rigorosa tendo em conta parâmetros quantificáveis como a ausência de aglomeração, a separação de fases e a deterioração da morfologia das nanopartículas. Uma vez assegurado o método de preparação dos nanofluídos, realizou-se uma análise paramétrica conducente a uma base de dados obtidos experimentalmente que inclui a visão central e globalizante da influência relativa dos diferentes fatores de controlo com impacto nas propriedades termofísicas. De entre as propriedades termofísicas, este estudo deu particular ênfase à condutividade térmica, sendo os fatores de controlo selecionados os seguintes: fluido base, temperatura, tamanho da partícula e concentração de nanopartículas. Experimentalmente, verificou-se que de entre os fatores de controlo estudados, os que maior influência detêm sobre a condutividade térmica do nanofluido, são o tamanho e concentração das nanopartículas. Com a segurança conferida por uma base de dados sólida e com o conhecimento acerca da contribuição relativa de cada fator de controlo no processo de transferência de calor, desenvolveu-se e validou-se um modelo físico-matemático com um caracter generalista, que permitirá determinar com segurança a condutividade térmica de nanofluidos.

A ingerência do conhecimento explícito no conhecimento tácito: a técnica Alexander e a prática e ensino da flauta

O presente trabalho é o resultado duma investigação heurística sobre os efeitos do estudo da Técnica Alexander (TA) na prática e no ensino da flauta. Submeti-me a uma centena de aulas de Técnica Alexander e procedi a uma análise reflexiva da minha aprendizagem e prática individual e pedagógica, registando a sua evolução através da progressiva incorporação dos princípios e metodologias daquela técnica. A primeira parte descreve os princípios e procedimentos da TA enquadrando-a na problemática das relações entre conhecimento tácito e explícito, nos processos de controlo motor voluntário e involuntário, e na eficácia e eficiência dos automatismos neuromusculares. A segunda parte constitui a descrição e análise do processo transformador catalisado pelo estudo da TA: modificações na coordenação muscular; na técnica respiratória; no empunhar da flauta e na preparação para a emissão da primeira nota, e na relação entre o equilíbrio do instrumento e o movimento dos dedos. Vários procedimentos e exercícios desenvolvidos para a resolução de problemas pessoais são apresentados justificando a sua eficácia. A TA não proporciona apenas alterações na coordenação muscular mas pode modificar os processos mentais. Por isso alguns princípios para uma organização eficiente da prática são discutidos e concretizados nalguns exercícios que promovem maior variabilidade, alternância entre análise e integração e clareza na concepção do gesto técnico-musical. Por último, a evolução da minha abordagem pedagógica, incorporando procedimentos inspirados na TA e desenvolvidos ao longo da investigação são ilustrados com alguns alunos. A tese argumenta que a TA pode desempenhar um papel fundamental na melhoria do desempenho dum músico e revela-se uma ferramenta pedagógica que merece ser explorada mais sistematicamente num ensino mais baseado numa experimentação guiada que promova uma maior autoconsciência dos processos neuromusculares do que na instrução prescritiva e explícita.

Compósitos CNTs/biocerâmico para a estimulação elétrica óssea in situ

The present thesis aims to develop a biocompatible and electroconductor bone graft containing carbon nanotubes (CNTs) that allows the in situ regeneration of bone cells by applying pulsed external electrical stimuli. The CNTs were produced by chemical vapor deposition (CVD) by a semi-continuous method with a yield of ~500 mg/day. The deposition parameters were optimised to obtain high pure CNTs ~99.96% with controlled morphologies, fundamental requisites for the biomedical application under study. The chemical functionalisation of CNTs was also optimised to maximise their processability and biocompatibility. The CNTs were functionalised by the Diels-Alder cycloaddition of 1,3-butadiene. The biological behaviour of the functionalised CNTs was evaluated in vitro with the osteoblastic cells line MG63 and in vivo, by subcutaneous implantation in rats. The materials did not induce an expressed inflammatory response, but the functionalised CNTs showed a superior in vitro and in vivo biocompatibility than the non-functionalised ones. Composites of ceramic matrix, of bioglass (Glass) and hydroxyapatite (HA), reinforced with carbon nanotubes (CNT/Glass/HA) were processed by a wet approach. The incorporation of just 4.4 vol% of CNTs allowed the increase of 10 orders of magnitude of the electrical conductivity of the matrix. In vitro studies with MG63 cells show that the CNT/Glass/HA composites guarantee the adhesion and proliferation of bone cells, and stimulate their phenotype expression, namely the alkaline phosphate (ALP). The interactions between the composite materials and the culture medium (α-MEM), under an applied electrical external field, were studied by scanning vibrating electrode technique. An increase of the culture medium electrical conductivity and the electrical field confinement in the presence of the conductive samples submerged in the medium was demonstrated. The in vitro electrical stimulation of MG63 cells on the conductive composites promotes the increase of the cell metabolic activity and DNA content by 130% and 60%, relatively to the non-stimulated condition, after only 3 days of daily stimulation of 15 μA for 15 min. Moreover, the osteoblastic gene expression for Runx2, osteocalcin (OC) and ALP was enhanced by 80%, 50% and 25%, after 5 days of stimulation. Instead, for dielectric materials, the stimulus delivering was less efficient, giving an equal or lower cellular response than the non-stimulated condition. The proposed electroconductive bone grafts offer exciting possibilities in bone regeneration strategies by delivering in situ electrical stimulus to cells and consequent control of the new bone tissue formation rate. It is expected that conductive smart biomaterials might turn the selective bone electrotherapy of clinical relevance by decreasing the postoperative healing times.

Tecnologias de informação e comunicação e o cidadão sénior : estudo sobre o impacto em variáveis psicossociais e a conceptualização de serviços com e para o cidadão sénior

Perante uma sociedade em célere envelhecimento demográfico e permanente avanço tecnológico, justifica-se a aposta em estudos que potenciem a ação comunicativa e a diminuição do isolamento social decorrente das perdas biopsicossociais associadas à idade sénior. Esta tese possui quatro objetivos de estudo: i) pretende-se investigar qual é o impacto da utilização das Tecnologias de Informação e Comunicação (TIC) no autoconceito (AC), no ânimo e na qualidade de vida (QV) de um grupo de seniores; ii) perceber se existe e qual a relação entre as variáveis independentes sexo, idade, estado civil, escolaridade, profissão, IPSS, regime de frequência, tempo na IPSS, orientação para frequentar a IPSS, visita de familiares e visita de amigos e as variáveis dependentes AC, ânimo, QV e respetivos fatores e domínios, nos momentos de pré e pós-teste; iii) perceber se a sua participação no processo de conceptualização de um serviço de comunicação assíncrona, email, influencia a sua usabilidade ao nível das componentes eficácia, eficiência e satisfação; iv) e sugerir a componente política da comunidade online sénior em desenvolvimento no âmbito do Projeto SEDUCE. Para o desenvolvimento do estudo estabeleceram-se parcerias com quatro Instituições Particulares de Segurança Social do concelho de Aveiro, integradas no âmbito do projeto SEDUCE. Os instrumentos utilizados para a avaliação do autoconceito, do ânimo e da qualidade de vida foram o Inventário Clínico de Auto-Conceito, a Escala de Ânimo do Centro Geriátrico de Philadelphia e a Escala de Qualidade de Vida da Organização Mundial de Saúde WHOQOL-Bref, respetivamente. No processo de conceptualização do serviço de email e da componente política da comunidade online utilizou-se a observação participativa e o contextual design. O estudo envolveu a participação de 42 seniores distribuídos por duas condições experimentais: 22 seniores do grupo experimental utilizaram as TIC duas vezes por semana (em sessões de 90 minutos cada, num total de 80 sessões) e 19 seniores do grupo de controlo passivo não experimentaram qualquer intervenção. Para a avaliação das variáveis psicossociais realizaram-se dois momentos de avaliação, antes e depois de 11 meses de intervenção, de Agosto de 2011 a Julho de 2012. Ao longo das sessões de envolvimento com as TIC observou-se que os seniores apresentam, continuamente, dificuldades em: manipular o rato e percecionar a sua ação no monitor; fazer a distinção entre teclas (enter, spacebar, delete, caps lock entre outras); em utilizar duplas teclas para colocar pontuação e acentuação; iniciar atividades no Microsoft Office Word; selecionar a informação disponibilizada em motores de pesquisa; perceber quais as zonas clicáveis; falta de confiança em efetivar ações; receio em iniciar nova atividades, pela falta de conhecimento e pelo medo de errar; memorizar endereços de email e passwords; e dar continuidade às tarefas. Na utilização do serviço de email consideram importante receber resposta quando enviam uma mensagem, assim como responder sempre aos remetentes; raramente colocam assunto nas mensagens; e expressam grande satisfação ao receber mensagens de familiares e/ou amigos. O processo de desenvolvimento de serviços com a participação ativa dos seniores revela-se exequível mas é necessário adaptar as práticas: os processos devem ser iterativos; evitar linguagem formal; clarificar o objetivo; deixar os seniores pensar em voz alta; dar-lhes tempo; mantê-los focados e não conduzi-los nas tarefas. Os resultados sugerem que houve aumento significativo do domínio físico da qualidade de vida do grupo experimental. Os participantes que exprimiram maiores níveis de satisfação ao utilizar as TIC apresentam uma perspetiva mais positiva sobre a maturidade psicológica e menos solidão e insatisfação. No grupo experimental e no grupo de controlo passivo verificam-se relações entre as variáveis independentes e as variáveis dependentes, quer no momento de pré-teste como de pós-teste. Conclui-se que a participação dos seniores no processo de conceptualização do serviço de email permitiu fomentar a componente eficácia da usabilidade mas não a satisfação ao utilizar o mesmo. Os resultados sobre a eficiência são inconclusivos. Sobre a componente política os seniores validam a existência de termos de utilização que orientem o comportamento de todos os utilizadores, assim como de uma política de privacidade. A área de registo proposta é adequada ao utilizador sénior.

Context-based wireless mesh networks

In the modern society, new devices, applications and technologies, with sophisticated capabilities, are converging in the same network infrastructure. Users are also increasingly demanding in personal preferences and expectations, desiring Internet connectivity anytime and everywhere. These aspects have triggered many research efforts, since the current Internet is reaching a breaking point trying to provide enough flexibility for users and profits for operators, while dealing with the complex requirements raised by the recent evolution. Fully aligned with the future Internet research, many solutions have been proposed to enhance the current Internet-based architectures and protocols, in order to become context-aware, that is, to be dynamically adapted to the change of the information characterizing any network entity. In this sense, the presented Thesis proposes a new architecture that allows to create several networks with different characteristics according to their context, on the top of a single Wireless Mesh Network (WMN), which infrastructure and protocols are very flexible and self-adaptable. More specifically, this Thesis models the context of users, which can span from their security, cost and mobility preferences, devices’ capabilities or services’ quality requirements, in order to turn a WMN into a set of logical networks. Each logical network is configured to meet a set of user context needs (for instance, support of high mobility and low security). To implement this user-centric architecture, this Thesis uses the network virtualization, which has often been advocated as a mean to deploy independent network architectures and services towards the future Internet, while allowing a dynamic resource management. This way, network virtualization can allow a flexible and programmable configuration of a WMN, in order to be shared by multiple logical networks (or virtual networks - VNs). Moreover, the high level of isolation introduced by network virtualization can be used to differentiate the protocols and mechanisms of each context-aware VN. This architecture raises several challenges to control and manage the VNs on-demand, in response to user and WMN dynamics. In this context, we target the mechanisms to: (i) discover and select the VN to assign to an user; (ii) create, adapt and remove the VN topologies and routes. We also explore how the rate of variation of the user context requirements can be considered to improve the performance and reduce the complexity of the VN control and management. Finally, due to the scalability limitations of centralized control solutions, we propose a mechanism to distribute the control functionalities along the architectural entities, which can cooperate to control and manage the VNs in a distributed way.

Control design for multicast-aware class-based networks

The expectations of citizens from the Information Technologies (ITs) are increasing as the ITs have become integral part of our society, serving all kinds of activities whether professional, leisure, safety-critical applications or business. Hence, the limitations of the traditional network designs to provide innovative and enhanced services and applications motivated a consensus to integrate all services over packet switching infrastructures, using the Internet Protocol, so as to leverage flexible control and economical benefits in the Next Generation Networks (NGNs). However, the Internet is not capable of treating services differently while each service has its own requirements (e.g., Quality of Service - QoS). Therefore, the need for more evolved forms of communications has driven to radical changes of architectural and layering designs which demand appropriate solutions for service admission and network resources control. This Thesis addresses QoS and network control issues, aiming to improve overall control performance in current and future networks which classify services into classes. The Thesis is divided into three parts. In the first part, we propose two resource over-reservation algorithms, a Class-based bandwidth Over-Reservation (COR) and an Enhanced COR (ECOR). The over-reservation means reserving more bandwidth than a Class of Service (CoS) needs, so the QoS reservation signalling rate is reduced. COR and ECOR allow for dynamically defining over-reservation parameters for CoSs based on network interfaces resource conditions; they aim to reduce QoS signalling and related overhead without incurring CoS starvation or waste of bandwidth. ECOR differs from COR by allowing for optimizing control overhead minimization. Further, we propose a centralized control mechanism called Advanced Centralization Architecture (ACA), that uses a single state-full Control Decision Point (CDP) which maintains a good view of its underlying network topology and the related links resource statistics on real-time basis to control the overall network. It is very important to mention that, in this Thesis, we use multicast trees as the basis for session transport, not only for group communication purposes, but mainly to pin packets of a session mapped to a tree to follow the desired tree. Our simulation results prove a drastic reduction of QoS control signalling and the related overhead without QoS violation or waste of resources. Besides, we provide a generic-purpose analytical model to assess the impact of various parameters (e.g., link capacity, session dynamics, etc.) that generally challenge resource overprovisioning control. In the second part of this Thesis, we propose a decentralization control mechanism called Advanced Class-based resource OverpRovisioning (ACOR), that aims to achieve better scalability than the ACA approach. ACOR enables multiple CDPs, distributed at network edge, to cooperate and exchange appropriate control data (e.g., trees and bandwidth usage information) such that each CDP is able to maintain a good knowledge of the network topology and the related links resource statistics on real-time basis. From scalability perspective, ACOR cooperation is selective, meaning that control information is exchanged dynamically among only the CDPs which are concerned (correlated). Moreover, the synchronization is carried out through our proposed concept of Virtual Over-Provisioned Resource (VOPR), which is a share of over-reservations of each interface to each tree that uses the interface. Thus, each CDP can process several session requests over a tree without requiring synchronization between the correlated CDPs as long as the VOPR of the tree is not exhausted. Analytical and simulation results demonstrate that aggregate over-reservation control in decentralized scenarios keep low signalling without QoS violations or waste of resources. We also introduced a control signalling protocol called ACOR Protocol (ACOR-P) to support the centralization and decentralization designs in this Thesis. Further, we propose an Extended ACOR (E-ACOR) which aggregates the VOPR of all trees that originate at the same CDP, and more session requests can be processed without synchronization when compared with ACOR. In addition, E-ACOR introduces a mechanism to efficiently track network congestion information to prevent unnecessary synchronization during congestion time when VOPRs would exhaust upon every session request. The performance evaluation through analytical and simulation results proves the superiority of E-ACOR in minimizing overall control signalling overhead while keeping all advantages of ACOR, that is, without incurring QoS violations or waste of resources. The last part of this Thesis includes the Survivable ACOR (SACOR) proposal to support stable operations of the QoS and network control mechanisms in case of failures and recoveries (e.g., of links and nodes). The performance results show flexible survivability characterized by fast convergence time and differentiation of traffic re-routing under efficient resource utilization i.e. without wasting bandwidth. In summary, the QoS and architectural control mechanisms proposed in this Thesis provide efficient and scalable support for network control key sub-systems (e.g., QoS and resource control, traffic engineering, multicasting, etc.), and thus allow for optimizing network overall control performance.

On the application of optimal control techniques in lossy fieldbuses

The performance of real-time networks is under continuous improvement as a result of several trends in the digital world. However, these tendencies not only cause improvements, but also exacerbates a series of unideal aspects of real-time networks such as communication latency, jitter of the latency and packet drop rate. This Thesis focuses on the communication errors that appear on such realtime networks, from the point-of-view of automatic control. Specifically, it investigates the effects of packet drops in automatic control over fieldbuses, as well as the architectures and optimal techniques for their compensation. Firstly, a new approach to address the problems that rise in virtue of such packet drops, is proposed. This novel approach is based on the simultaneous transmission of several values in a single message. Such messages can be from sensor to controller, in which case they are comprised of several past sensor readings, or from controller to actuator in which case they are comprised of estimates of several future control values. A series of tests reveal the advantages of this approach. The above-explained approach is then expanded as to accommodate the techniques of contemporary optimal control. However, unlike the aforementioned approach, that deliberately does not send certain messages in order to make a more efficient use of network resources; in the second case, the techniques are used to reduce the effects of packet losses. After these two approaches that are based on data aggregation, it is also studied the optimal control in packet dropping fieldbuses, using generalized actuator output functions. This study ends with the development of a new optimal controller, as well as the function, among the generalized functions that dictate the actuator’s behaviour in the absence of a new control message, that leads to the optimal performance. The Thesis also presents a different line of research, related with the output oscillations that take place as a consequence of the use of classic co-design techniques of networked control. The proposed algorithm has the goal of allowing the execution of such classical co-design algorithms without causing an output oscillation that increases the value of the cost function. Such increases may, under certain circumstances, negate the advantages of the application of the classical co-design techniques. A yet another line of research, investigated algorithms, more efficient than contemporary ones, to generate task execution sequences that guarantee that at least a given number of activated jobs will be executed out of every set composed by a predetermined number of contiguous activations. This algorithm may, in the future, be applied to the generation of message transmission patterns in the above-mentioned techniques for the efficient use of network resources. The proposed task generation algorithm is better than its predecessors in the sense that it is capable of scheduling systems that cannot be scheduled by its predecessor algorithms. The Thesis also presents a mechanism that allows to perform multi-path routing in wireless sensor networks, while ensuring that no value will be counted in duplicate. Thereby, this technique improves the performance of wireless sensor networks, rendering them more suitable for control applications. As mentioned before, this Thesis is centered around techniques for the improvement of performance of distributed control systems in which several elements are connected through a fieldbus that may be subject to packet drops. The first three approaches are directly related to this topic, with the first two approaching the problem from an architectural standpoint, whereas the third one does so from more theoretical grounds. The fourth approach ensures that the approaches to this and similar problems that can be found in the literature that try to achieve goals similar to objectives of this Thesis, can do so without causing other problems that may invalidate the solutions in question. Then, the thesis presents an approach to the problem dealt with in it, which is centered in the efficient generation of the transmission patterns that are used in the aforementioned approaches.

Communication between nodes for autonomic and distributed management

Over the last decade, the most widespread approaches for traditional management were based on the Simple Network Management Protocol (SNMP) or Common Management Information Protocol (CMIP). However, they both have several problems in terms of scalability, due to their centralization characteristics. Although the distributed management approaches exhibit better performance in terms of scalability, they still underperform regarding communication costs, autonomy, extensibility, exibility, robustness, and cooperation between network nodes. The cooperation between network nodes normally requires excessive overheads for synchronization and dissemination of management information in the network. For emerging dynamic and large-scale networking environments, as envisioned in Next Generation Networks (NGNs), exponential growth in the number of network devices and mobile communications and application demands is expected. Thus, a high degree of management automation is an important requirement, along with new mechanisms that promote it optimally and e ciently, taking into account the need for high cooperation between the nodes. Current approaches for self and autonomic management allow the network administrator to manage large areas, performing fast reaction and e ciently facing unexpected problems. The management functionalities should be delegated to a self-organized plane operating within the network, that decrease the network complexity and the control information ow, as opposed to centralized or external servers. This Thesis aims to propose and develop a communication framework for distributed network management which integrates a set of mechanisms for initial communication, exchange of management information, network (re) organization and data dissemination, attempting to meet the autonomic and distributed management requirements posed by NGNs. The mechanisms are lightweight and portable, and they can operate in di erent hardware architectures and include all the requirements to maintain the basis for an e cient communication between nodes in order to ensure autonomic network management. Moreover, those mechanisms were explored in diverse network conditions and events, such as device and link errors, di erent tra c/network loads and requirements. The results obtained through simulation and real experimentation show that the proposed mechanisms provide a lower convergence time, smaller overhead impact in the network, faster dissemination of management information, increase stability and quality of the nodes associations, and enable the support for e cient data information delivery in comparison to the base mechanisms analyzed. Finally, all mechanisms for communication between nodes proposed in this Thesis, that support and distribute the management information and network control functionalities, were devised and developed to operate in completely decentralized scenarios.

Advanced energy efficient coordinated multi-point transmission for OFDMA

The ever-growing energy consumption in mobile networks stimulated by the expected growth in data tra ffic has provided the impetus for mobile operators to refocus network design, planning and deployment towards reducing the cost per bit, whilst at the same time providing a signifi cant step towards reducing their operational expenditure. As a step towards incorporating cost-eff ective mobile system, 3GPP LTE-Advanced has adopted the coordinated multi-point (CoMP) transmission technique due to its ability to mitigate and manage inter-cell interference (ICI). Using CoMP the cell average and cell edge throughput are boosted. However, there is room for reducing energy consumption further by exploiting the inherent exibility of dynamic resource allocation protocols. To this end packet scheduler plays the central role in determining the overall performance of the 3GPP longterm evolution (LTE) based on packet-switching operation and provide a potential research playground for optimizing energy consumption in future networks. In this thesis we investigate the baseline performance for down link CoMP using traditional scheduling approaches, and subsequently go beyond and propose novel energy e fficient scheduling (EES) strategies that can achieve power-e fficient transmission to the UEs whilst enabling both system energy effi ciency gain and fairness improvement. However, ICI can still be prominent when multiple nodes use common resources with di fferent power levels inside the cell, as in the so called heterogeneous networks (Het- Net) environment. HetNets are comprised of two or more tiers of cells. The rst, or higher tier, is a traditional deployment of cell sites, often referred to in this context as macrocells. The lower tiers are termed small cells, and can appear as microcell, picocells or femtocells. The HetNet has attracted signiffi cant interest by key manufacturers as one of the enablers for high speed data at low cost. Research until now has revealed several key hurdles that must be overcome before HetNets can achieve their full potential: bottlenecks in the backhaul must be alleviated, as well as their seamless interworking with CoMP. In this thesis we explore exactly the latter hurdle, and present innovative ideas on advancing CoMP to work in synergy with HetNet deployment, complemented by a novel resource allocation policy for HetNet tighter interference management. As system level simulator has been used to analyze the proposed algorithm/protocols, and results have concluded that up to 20% energy gain can be observed.

A terapia de grupo na doença oncológica

Existem milhões de sobreviventes de cancro da mama no mundo, em exponencial crescimento. Esta população pode apresentar preocupações relevantes acerca do futuro, depressão, ansiedade, sintomas pós-traumáticos, e comprometimento da qualidade de vida. As intervenções de grupo breves, estruturadas, especialmente as que incluem estratégias cognitivo-comportamentais, têm sido indicadas para esta população. O presente trabalho surge neste contexto, em que os estudos são escassos, especialmente em Portugal. Um conjunto de 5 estudos foi conduzido com o intuito de avaliar a eficácia de dois programas de intervenção de grupo breves e estruturadas de inspiração cognitivo-comportamental, um de tipo psicopedagógico e outro de terapia cognitivo-comportamental, em sobreviventes de cancro da mama. Nos primeiros dois estudos procedeu-se ao estudo das caraterísticas psicométricas de dois instrumentos de avaliação, o Questionário de Formas de Lidar com o Cancro (CCQ) e o Questionário de Saúde do Paciente (PHQ-9).Os dois estudos seguintes referem-se ao desenvolvimento dos programas de intervenção de grupo, acompanhados dos resultados preliminares. No último estudo avaliou-se a eficácia dos dois programas de intervenção na promoção do ajustamento psicossocial de 62 sobreviventes de cancro da mama, num estudo quasi-experimental, com pré e pós-testes e duas avaliações de seguimento (3 e 6 meses após a intervenção). Foram utilizados os seguintes instrumentos de avaliação: o CCQ; o PHQ-9; a Escala de Controlo Emocional (CEC); a Escala de Ansiedade e Depressão Hospitalar (EADH); o questionário de qualidade de vida da Organização Europeia de Investigação e Tratamento de Cancro com o módulo suplementar de cancro da mama (EORTC QLQ-C30 e BR-23); o Inventário Clínico de Autoconceito (ICAC); o Teste de Orientação de Vida - Revisto (TOV-R); o Perfil dos Estados de Humor (POMS); a Subescala de Crescimento Pessoal da Escala de Bem-Estar Psicológico (EBEP); a sub-escala de espiritualidade e o Inventário de estado-traço de ansiedade (STAI). Resultados: As sobreviventes que não tiveram intervenção apresentaram deterioração de dois domínios da qualidade de vida, a função cognitiva e a dor, para além de piores resultados na subescala de vigor. A deterioração dos domínios da qualidade de vida manteve-se aos 3 meses e extendeu-se aos sintomas da mama, o que não se verificou com o vigor. O grupo com intervenção psicoeducativa apresentou melhoria do autoconceito até aos 6 meses. Neste grupo também se observou um aumento do controlo emocional até aos 3 meses. O grupo de terapia cognitivo-comportamental apresentou aumento do estado de ansiedade e diminuição do funcionamento de papel no final da intervenção, diminuição do funcionamento emocional aos 3 meses e aumento na hostilidade e na confusão aos 6 meses. Ambos os grupos com intervenção apresentaram diminuição do traço de ansiedade aos 6 meses. Foram encontradas diversas correlações significativas destes efeitos com variáveis demográficas, clínicas e psicossociais. Conclusão: As intervenções de grupo breves, de inspiração cognitivo-comportamental, mostraram contribuir para a redução do traço de ansiedade a longo prazo e para a manutenção da função cognitiva, da dor, do vigor, e dos sintomas da mama nas sobreviventes. O programa psicopedagógico parece ser mais indicado para as sobreviventes, pelos efeitos no autoconceito, com maior extensão a longo prazo. São referidas implicações para a prática clínica e para a promoção da saúde mental desta população.

NMR in the characterization of heavy residual procedural streams

The main objective of this work was to monitor a set of physical-chemical properties of heavy oil procedural streams through nuclear magnetic resonance spectroscopy, in order to propose an analysis procedure and online data processing for process control. Different statistical methods which allow to relate the results obtained by nuclear magnetic resonance spectroscopy with the results obtained by the conventional standard methods during the characterization of the different streams, have been implemented in order to develop models for predicting these same properties. The real-time knowledge of these physical-chemical properties of petroleum fractions is very important for enhancing refinery operations, ensuring technically, economically and environmentally proper refinery operations. The first part of this work involved the determination of many physical-chemical properties, at Matosinhos refinery, by following some standard methods important to evaluate and characterize light vacuum gas oil, heavy vacuum gas oil and fuel oil fractions. Kinematic viscosity, density, sulfur content, flash point, carbon residue, P-value and atmospheric and vacuum distillations were the properties analysed. Besides the analysis by using the standard methods, the same samples were analysed by nuclear magnetic resonance spectroscopy. The second part of this work was related to the application of multivariate statistical methods, which correlate the physical-chemical properties with the quantitative information acquired by nuclear magnetic resonance spectroscopy. Several methods were applied, including principal component analysis, principal component regression, partial least squares and artificial neural networks. Principal component analysis was used to reduce the number of predictive variables and to transform them into new variables, the principal components. These principal components were used as inputs of the principal component regression and artificial neural networks models. For the partial least squares model, the original data was used as input. Taking into account the performance of the develop models, by analysing selected statistical performance indexes, it was possible to conclude that principal component regression lead to worse performances. When applying the partial least squares and artificial neural networks models better results were achieved. However, it was with the artificial neural networks model that better predictions were obtained for almost of the properties analysed. With reference to the results obtained, it was possible to conclude that nuclear magnetic resonance spectroscopy combined with multivariate statistical methods can be used to predict physical-chemical properties of petroleum fractions. It has been shown that this technique can be considered a potential alternative to the conventional standard methods having obtained very promising results.

Dependable wireless real-time communications for open environments

Wireless communication technologies have become widely adopted, appearing in heterogeneous applications ranging from tracking victims, responders and equipments in disaster scenarios to machine health monitoring in networked manufacturing systems. Very often, applications demand a strictly bounded timing response, which, in distributed systems, is generally highly dependent on the performance of the underlying communication technology. These systems are said to have real-time timeliness requirements since data communication must be conducted within predefined temporal bounds, whose unfulfillment may compromise the correct behavior of the system and cause economic losses or endanger human lives. The potential adoption of wireless technologies for an increasingly broad range of application scenarios has made the operational requirements more complex and heterogeneous than before for wired technologies. On par with this trend, there is an increasing demand for the provision of cost-effective distributed systems with improved deployment, maintenance and adaptation features. These systems tend to require operational flexibility, which can only be ensured if the underlying communication technology provides both time and event triggered data transmission services while supporting on-line, on-the-fly parameter modification. Generally, wireless enabled applications have deployment requirements that can only be addressed through the use of batteries and/or energy harvesting mechanisms for power supply. These applications usually have stringent autonomy requirements and demand a small form factor, which hinders the use of large batteries. As the communication support may represent a significant part of the energy requirements of a station, the use of power-hungry technologies is not adequate. Hence, in such applications, low-range technologies have been widely adopted. In fact, although low range technologies provide smaller data rates, they spend just a fraction of the energy of their higher-power counterparts. The timeliness requirements of data communications, in general, can be met by ensuring the availability of the medium for any station initiating a transmission. In controlled (close) environments this can be guaranteed, as there is a strict regulation of which stations are installed in the area and for which purpose. Nevertheless, in open environments, this is hard to control because no a priori abstract knowledge is available of which stations and technologies may contend for the medium at any given instant. Hence, the support of wireless real-time communications in unmanaged scenarios is a highly challenging task. Wireless low-power technologies have been the focus of a large research effort, for example, in the Wireless Sensor Network domain. Although bringing extended autonomy to battery powered stations, such technologies are known to be negatively influenced by similar technologies contending for the medium and, especially, by technologies using higher power transmissions over the same frequency bands. A frequency band that is becoming increasingly crowded with competing technologies is the 2.4 GHz Industrial, Scientific and Medical band, encompassing, for example, Bluetooth and ZigBee, two lowpower communication standards which are the base of several real-time protocols. Although these technologies employ mechanisms to improve their coexistence, they are still vulnerable to transmissions from uncoordinated stations with similar technologies or to higher power technologies such as Wi- Fi, which hinders the support of wireless dependable real-time communications in open environments. The Wireless Flexible Time-Triggered Protocol (WFTT) is a master/multi-slave protocol that builds on the flexibility and timeliness provided by the FTT paradigm and on the deterministic medium capture and maintenance provided by the bandjacking technique. This dissertation presents the WFTT protocol and argues that it allows supporting wireless real-time communication services with high dependability requirements in open environments where multiple contention-based technologies may dispute the medium access. Besides, it claims that it is feasible to provide flexible and timely wireless communications at the same time in open environments. The WFTT protocol was inspired on the FTT paradigm, from which higher layer services such as, for example, admission control has been ported. After realizing that bandjacking was an effective technique to ensure the medium access and maintenance in open environments crowded with contention-based communication technologies, it was recognized that the mechanism could be used to devise a wireless medium access protocol that could bring the features offered by the FTT paradigm to the wireless domain. The performance of the WFTT protocol is reported in this dissertation with a description of the implemented devices, the test-bed and a discussion of the obtained results.

Quantificação de mercúrio em águas de consumo: validação do método na Luságua

Para o ser humano, a água sempre foi um recurso essencial ao longo da sua evolução. Hoje em dia, com todo o avanço tecnológico, a água é um bem muito vulnerável às diversas atividades antropogénicas. Entre os muitos contaminantes que podem afetar a qualidade da água para consumo humano, os metais causam grande preocupação devido à sua elevada toxicidade. O mercúrio é um dos contaminantes que deve ser devidamente controlado devido ao seu elevado grau de toxicidade. Este Estágio foi realizado no Laboratório Luságua e o seu principal objetivo foi avaliar se era possível baixar o limite de quantificação da técnica existente na empresa para quantificar o mercúrio em águas de consumo e validar o método através do cálculo de vários parâmetros de controlo de qualidade. Foi ainda feita a comparação entre a técnica de quantificação de mercúrio existente na Luságua (CV-AAS) e a existente na Universidade de Aveiro (CVAFS) para avaliar se havia uma mais-valia para a Luságua se adquirisse um novo equipamento para analisar o mercúrio em águas. Os parâmetros de validação avaliados nos dois métodos derem resultados semelhantes, não identificando a necessidade atual de substituir o equipamento existente na Luságua, até porque se conseguiu baixar o limite de quantificação, atingindo assim o objetivo estabelecido no início para este Estágio.

Management and Control of Water Supply Systems

The fast increase in the energy’s price has brought a growing concern about the highly expensive task of transporting water. By creating an hydraulic model of the Water Supply System’s (WSS) network and predicting its behaviour, it is possible to take advantage of the energy’s tariffs, reducing the total cost on pumping activities. This thesis was developed, in association with a technology transfer project called the E-Pumping. It focuses on finding a flexible supervision and control strategy, adaptable to any existent Water Supply System (WSS), as well as forecasting the water demand on a time period chosen by the end user, so that the pumping actions could be planned to an optimum schedule, that minimizes the total operational cost. The OPC protocol, associated to a MySQL database were used to develop a flexible tool of supervision and control, due to their adaptability to function with equipments from various manufacturers, being another integrated modular part of the E-Pumping project. Furthermore, in this thesis, through the study and performance tests of several statistical models based on time series, specifically applied to this problem, a forecasting tool adaptable to any station, and whose model parameters are automatically refreshed at runtime, was developed and added to the project as another module. Both the aforementioned modules were later integrated with an Graphical User Interface (GUI) and installed in a pilot application at the ADDP’s network. The implementation of this software on WSSs across the country will reduce the water supply companies’ running costs, improving their market competition and, ultimately, lowering the water price to the end costumer.