Integration of geochemical and biological modifications in mining areas: waters, sediments and diatoms

The development of mining activities over thousands of years in the region of Aljustrel is nowadays visible as a vast area of ore tailings, slag and host rocks of sulphides mineralization. The generation of acidic waters by the alteration of pyritic minerals - Acid Mine Drainage (AMD) - causes a significant impact on the river system both in the south of the village (Rib ª. Água Forte) and in the north of it (Rib ª. Água Azeda and Barranco do Farrobo), which is reflected in extremely low pH values (< 3) and high concentrations of As, Cd, Cu, Fe, Mn, Pb, Zn and sulphates. This study aimed to assess the environmental impacts extent, integrating geochemical (surface waters and stream sediments) and biological (diatoms) parameters. Three groups of sites were defined, based on sediments and water analysis, which integration with diatom data showed the same association of groups: Group 1- impacted, with acidic pH (1.9-5.1), high metal contents (0.4-1975 mg L-1) and Fe-Mg-sulphate waters, being metals more bioavailable in waters in cationic form (Me2+); mineralogically the sediments were characterized by phyllosilicates and sulphates/oxy-hydroxysulphate phases, easily solubilized, retaining a high amount of metals when precipitated; dominant taxon was Pinnularia aljustrelica (a new species); Group 2- slightly impacted, weak acid to neutral pH (5.0-6.8), metal contents not so high (0.2-25 mg L-1) and Fe-Mg-sulphate to Mg-chloride waters; dominant taxa were Brachysira neglectissima and Achnanthidium minutissimum; Group 3- unimpacted, alkaline pH (7.0-8.4), low metal contents (0-7 mg L-1) with Mg-chloride waters. In this group, metals were associated to the primary phases (e.g. sulphides), not so easily available; the existence of high chloride contents explained the presence of typical taxa of brackish/marine (e.g. Entomoneis paludosa) waters. Taxonomical aspects of the diatoms were studied (discovery of a new species: Pinnularia aljustrelica Luis, Almeida et Ector sp. nov.), as well as morphometric (size decrease of diatoms valves, as well as the appearance of deformed valves of Eunotia exigua in Group 1 and A. minutissimum in Group 2) and physiological (effective to assess the effects of metals/acidity in the photosynthetic efficiency through PAM Fluorometry) aspects. A study was carried out in an artificial river system (microcosm) that aimed to mimic Aljustrel’s extreme conditions in controlled laboratory conditions. The chronic effects of Fe, SO42- and acidity in field biofilms, inoculated in the artificial rivers, were evaluated as well as their contribution to the communities’ tolerance to metal toxicity, through acute tests with two metals (Cu and Zn). In general, the effects caused by low pH values and high concentrations of Fe and SO42- were reflected at the community level by the decrease in diversity, the predominance of acidophilic species, the decrease in photosynthetic efficiency and the increase of enzymatic (e.g. catalase, superoxide dismutase) and non-enzymatic activities (e.g. total glutathione and total phytochelatins). However, it was possible to verify that acidity performed a protective effect in the communities, upon Cu and Zn addition. A comparative study between Aljustrel mining area and New Brunswick mining area was carried out, both with similar mining and geological conditions, reflected in similar diatom communities in both mines, but in very different geographic and climatic areas.

Effect assessment of nanoparticles toxicity in the terrestrial compartment

Over 11 million tons of nanomaterials (NMs) have been produced in 2012 and predictions point the increase in production. Despite predictions and extended usage via consumer products and industry, the understanding of the potential impact of these materials on the environment is virtually absent. The main aim of this thesis is to understand how a selected group of nanomaterials (metal based particles) may impact soil invertebrates, with special focus on the mechanisms of response. Since a case-by-case Environmental Risk Assessment (ERA) of all the emerging contaminants (particularly NMs) is impossible, among others due to time and cost reasons, to gain understanding on the mechanism of action and response is very important to reach a common paradigm. Understanding the modes of action provides predictive characters in cross particle extrapolation. Besides, it also provides insight for the production of new and sustainable materials. Overall, the effects of the selected NMs (Copper and Silver, Titanium and Zirconium oxides) and the respective salt forms, were investigated at the gene expression (using high-throughput tools, microarray and qPCR technology), biochemical (using enzymatic assays for analysis of oxidative stress markers) and organism (survival and reproduction as in OECD test guidelines) levels, this using standard soil species (Enchytraeus albidus, Enchytraeus crypticus, Eisenia fetida). Gene expression analysis provided valuable information on the mechanisms affected by each of the NMs. The gene expression profile highlighted a (nano)material signature and the effect of the duration of exposure. The functional analyses integrated with the biochemical and organism data, revealed a good understanding power. The biochemical parameters (oxidative stress related) were distinct across the materials and also influenced by duration of exposure and concentration. The standardized organismal responses differed the least between the various materials. The overall outcome is that, in this context of NMs effect assessment, gene expression and enzymatic assays introduced a very important knowledge gap, which could not had been achieved by the standard organismal effects alone. A reoccurring issue with some metal based NMs is the possible dissolution and subsequent release of ions that then causes toxicity e.g. Cu-NPs or Ag-NPs release Cu2+ or Ag+. The oxidation state of the particles was investigated, although this was not the focus of the thesis. The study of fate, e.g. dissolution of NPs, is also only in its beginning and the appropriate techniques are currently being developed. The results showed a specific nanoparticle effect. The UV exposure with titanium dioxide nanoparticles increased its effect.

Biology, ecology, population dynamics and distribution of metals in Sepia officinalis on a typical estuarine coastal lagoon - Ria de Aveiro

The common cuttlefish, Sepia officinalis, is a necto-benthic cephalopod that can live in coastal ecosystems, with high influence of anthropogenic pressures and thus be vulnerable to exposure to various types of contaminants. The cuttlefish is a species of great importance to the local economy of Aveiro, considering the global data of catches of this species in the Ria de Aveiro. However, studies on this species in Ria de Aveiro are scarce, so the present study aims to fill this information gap about the cuttlefish in the Ria de Aveiro. The cuttlefish enters Ria de Aveiro in the spring and summer to reproduce, returning to deeper waters in the winter. In terms of abundance, the eastern and center regions of the lagoon, closer to the sea, showed the highest values of abundance, while the northern and southern regions of the main channel had the lowest abundance. This fact may be related to abiotic factors, as well as depth, salinity and temperature. In the most southern point of the Ria de Aveiro (Areão) no cuttlefish was caught. This site had the lowest values of salinity and depth. The cuttlefish has an allometric the females being heavier than males to mantle lengths greater than 82.4 mm. Males reach sexual maturity first than females. In Ria de Aveiro in a generation of parents was found. The cuttlefish, presents itself as opportunistic predators, consuming a wide variety of prey from different taxa. The diet was similar in different sampling locations observing significant differences for the seasons. S. officinalis was captured at 10 sites in the Ria de Aveiro with different anthropogenic sources of contamination. Thus, levels of metals analyzed were similar at all sampling sites, with the exception of a restricted area, Laranjo, which showed higher values. The cuttlefish has the ability to accumulate metals in your body. The levels of Fe, Zn, Cu, Cd, Pb and Hg found in the digestive gland and mantle reflect a differential accumulation of metals in the tissues. This accumulation is related to the type and function of tissue analyzed and the type of metal analysis (essential and non-essential). The metal concentrations in the digestive gland are higher than in the mantle, with the exception of mercury. This may be due to the high affinity of the mantle for the incorporation of methylmercury (MeHg), the most abundant form of mercury. The accumulation of metals can vary over a lifetime, depending on the metal. The concentrations of Zn, Cd and Hg increases throughout life, while Pb decreases and essential metals such as Fe and Cu remain constant. The data collected suggest that the cuttlefish (Sepia officinalis) can be used as a bioindicator of environmental contamination for some metals.

Quantificação de mercúrio em águas de consumo: validação do método na Luságua

Para o ser humano, a água sempre foi um recurso essencial ao longo da sua evolução. Hoje em dia, com todo o avanço tecnológico, a água é um bem muito vulnerável às diversas atividades antropogénicas. Entre os muitos contaminantes que podem afetar a qualidade da água para consumo humano, os metais causam grande preocupação devido à sua elevada toxicidade. O mercúrio é um dos contaminantes que deve ser devidamente controlado devido ao seu elevado grau de toxicidade. Este Estágio foi realizado no Laboratório Luságua e o seu principal objetivo foi avaliar se era possível baixar o limite de quantificação da técnica existente na empresa para quantificar o mercúrio em águas de consumo e validar o método através do cálculo de vários parâmetros de controlo de qualidade. Foi ainda feita a comparação entre a técnica de quantificação de mercúrio existente na Luságua (CV-AAS) e a existente na Universidade de Aveiro (CVAFS) para avaliar se havia uma mais-valia para a Luságua se adquirisse um novo equipamento para analisar o mercúrio em águas. Os parâmetros de validação avaliados nos dois métodos derem resultados semelhantes, não identificando a necessidade atual de substituir o equipamento existente na Luságua, até porque se conseguiu baixar o limite de quantificação, atingindo assim o objetivo estabelecido no início para este Estágio.

Derivation of soil screening values for metals in Portuguese natural soil

The increasing human activity has been responsible by profound changes and a constinuos degradation of the soil compartment in all the European territory. Some European policies are appearing focusing soil’s protection and the management of contaminated sites, in order to recover land for other uses. To regulate the risk assessment and the management of contaminated soils, many European member states adopted soil guideline values, as for example soil screnning values (SSV).These values are particularly useful for the the first tier of the Ecological Risk Assessment (ERA) processes of contaminated sites,especially for a first screening of sites requiring a more site-specific evaluation. Hence, the approriate definition of regional SSVs will have relevant economic impacts in the management of contaminated sites. Portugal is one of European Member States that still lack these soil guideline values. In this context, this study gaves a remarkable contribution in the generation of ecotoxicological data for soil microbiological parameters, terrestrial plants and invertebrates for the derivation of SSVs for uranium (U), cadmium (Cd) and copper (Cu), using a Portuguese natural soil, representative of a dominant type of soil in the Portuguese territory. SSVs were derived based on two methods proposed by the the Technical Guidance Document for Risk Assessment of the European Commission; namely the assessment factor method (AF) and the species sensitivity distribution (SSD) method (with some adaptations). The outputs of both methods were compared and discussed. Further, this study laid the foundation for a deeper reflection about the cut-off (hazard concentration for a given percentage of species - HCps) to be estimated from the SSDs, and to be selected for the derivation of SSVs, with the adequate level of protection. It was proven that this selection may vary for different contaminants, however a clear justification should be given, in each case. The SSvs proposed in this study were for: U (151.4 mg U kg-1dw), Cd (5.6 mg Cd kg-1dw), and Cu (58.5 mg Cu kg-1dw) These values should now be tested for their descriminating power of soils with different levels of contamination. However, this studies clarifies the approach that should be followed for the derivation of SSVs for other metals and organic contaminants, and for other dominant types of Portuguese natural soils.

Alkali-free bioactive glasses for bone regeneration

Bioactive glasses and glass-ceramics are a class of third generation biomaterials which elicit a special response on their surface when in contact with biological fluids, leading to strong bonding to living tissues. The purpose of the present study was to develop diopside based alkali-free bioactive glasses in order to achieve good sintering behaviour, high bioactivity, and a dissolution/ degradation rates compatible with the target applications in bone regeneration and tissue engineering. Another aim was to understand the structure-property relationships in the investigated bioactive glasses. In this quest, various glass compositions within the Diopside (CaMgSi2O6) – Fluorapatite (Ca5(PO4)3F) – Tricalcium phosphate (3CaO•P2O5) system have been investigated. All the glasses were prepared by melt-quenching technique and characterized by a wide array of complementary characterization techniques. The glass-ceramics were produced by sintering of glass powders compacts followed by a suitable heat treatment to promote the nucleation and crystallization phenomena. Furthermore, selected parent glass compositions were doped with several functional ions and an attempt to understand their effects on the glass structure, sintering ability and on the in vitro bio-degradation and biomineralization behaviours of the glasses was made. The effects of the same variables on the devitrification (nucleation and crystallization) behaviour of glasses to form bioactive glass-ceramics were also investigated. Some of the glasses exhibited high bio-mineralization rates, expressed by the formation of a surface hydroxyapatite layer within 1–12 h of immersion in a simulated body fluid (SBF) solution. All the glasses showed relatively lower degradation rates in comparison to that of 45S5 Bioglass®. Some of the glasses showed very good in vitro behaviour and the glasses co-doped with zinc and strontium showed an in vitro dose dependent behaviour. The as-designed bioactive glasses and glass–ceramic materials are excellent candidates for applications in bone regeneration and for the fabrication of scaffolds for tissue engineering.

Materiais à base de óxidos com estrutura do tipo perovskite e compósitos como ânodos de PCES

This work was focused on the analysis of transport, thermomechanical and electrochemical properties of a series of perovskite-like oxide materials and composites for potential applications as anodes of intermediate-temperature solid oxide fuel cells (SOFCs) with lanthanum gallate and silicate solid electrolytes. The primary attention was centered on A(Mn,Nb)O3-δ (A = Sr, Ca) and (La,Sr)(Mn,Ti)O3-based systems, lanthanum chromite substituted with acceptor-type and variable-valence cations, and various Ni-containing cermets. Emphasis was given to phase stability of the materials, their crystal structure, microstructure of porous electrode layers and dense ceramics, electronic conductivity, Seebeck coefficient, oxygen permeability, thermal and chemical induced expansion, and anodic overpotentials of the electrodes deposited onto (La,Sr)(Ga,Mg)O3- and La10(Si,Al)6O27- based electrolyte membranes. In selected cases, roles of oxygen diffusivity, states of the transition metal cations relevant for the electronic transport, catalytically active additives and doped ceria protective interlayers introduced in the model electrochemical cells were assessed. The correlations between transport properties of the electrode materials and electrochemical behavior of porous electrodes showed that the principal factors governing anode performance include, in particular, electronic conduction of the anode compositions and cation interdiffusion between the electrodes and solid electrolytes. The latter is critically important for the silicatebased electrolyte membranes, leading to substantially worse anode properties compared to the electrochemical cells with lanthanum gallate solid electrolyte. The results made it possible to select several anode compositions exhibiting lower area-specific electrode resistivity compared to known analogues, such as (La,Sr)(Cr,Mn)O3-δ.

Asymmetric rolling of 5182 aluminium alloy and interstitial free steel sheets

This Ph.D. research focuses on asymmetric rolling (ASR), as an alternative method for improving mechanical responses of aluminium-magnesium alloy and interstitial free (IF) steel regarding industrial requirements. Aluminium alloys are attractive materials in various industries due to their appropriate properties such as low density and corrosion resistance; however, their low formability has limited their applications. As formability of aluminium alloys can be improved through texture development, part of this dissertation is dedicated to producing the desired crystallographic texture with the ASR process. Two types of ASR (i.e. reverse and continuous asymmetric rolling) were investigated. The impact of shear deformation imposed by ASR processes on developing the desirable texture and consequently on mechanical behaviours was observed. The developed shear texture increased the normal and also planar anisotropy. Texture evolution during plastic deformation as well as induced mechanical behaviour were simulated using the “self-consistent” and Taylor models. Interstitial free (IF) steel was the second material selected in this dissertation. Since IF steel is one of the most often used materials in automotive industries it was chosen to investigate the effect of shear deformation through ASR on its properties. Two types of reverse and continuous asymmetric rolling were carried out to deform IF steel sheets. The results of optical microscopy and atomic force microscopy observations showed no significant difference between the grains’ morphology of asymmetric and conventionally rolled samples, whereas the obtained results of transmission electron microscopy indicated that fine and equiaxed dislocation cells were formed through the asymmetric rolling process. This structure is due to imposed shear deformation during the ASR process. Furthermore, the mechanical behaviour of deformed and annealed sheets was evaluated through uniaxial tensile tests. Results showed that at low thickness reductions (18%) the asymmetric rolled sample presented higher stress than that of the conventionally rolled sheet; while for higher thickness reductions (60%) the trend was reversed. The texture analyses indicated that intense rolling texture components which developed through 60% thickness reduction of conventional rolling cause a relatively higher stress; on the contrary the fine structure resulting from ASR appears to be the source of higher stress observed after pre-deformation of 18%.

The effects of chemicals in isopods : a multi-organizational evaluation

The global aim of this thesis was to evaluate and assess the effects of a pesticide (dimethoate) and a metal (nickel), as model chemicals, within different organization levels, starting at the detoxification pathways (enzymatic biomarkers) and energy costs associated (energy content quantification, energy consumption and CEA) along with the physiological alterations at the individual and population level (mortality), leading to a metabolomic analysis (using liquid 1H-NMR) and finally a gene expression analysis (transcriptome and RT-qPCR analysis). To better understand potential variations in response to stressors, abiotic factors were also assessed in terrestrial isopods such as temperature, soil moisture and UV radiation. The evaluation performed using biochemical biomarkers and energy related parameters showed that increases in temperature might negatively affect the organisms by generating oxidative stress. It also showed that this species is acclimated to environments with low soil moisture, and that in high moisture scenarios there was a short gap between the optimal and adverse conditions that led to increased mortality. As for UV-R, doses nowadays present have shown to induce significant negative impact on these organisms. The long-term exposure to dimethoate showed that besides the neurotoxicity resulting from acetylcholinesterase inhibition, this stressor also caused oxidative stress. This effect was observed for both concentrations used (recommended field dose application and a below EC50 value) and that its combination with different temperatures (20ºC and 25ºC) showed different response patterns. It was also observed that dimethoate’s degradation rate in soils was higher in the presence of isopods. In a similar study performed with nickel, oxidative stress was also observed. But, in the case of this stressor exposure, organisms showed a strategy where the energetic costs necessary for detoxification (biomarkers) seemed to be compensated by positive alterations in the energy related parameters. In this work we presented for the first time a metabolomic profile of terrestrial isopods exposed to stressors (dimethoate and niquel), since until the moment only a previous study was performed on a metabolomic evaluation in nonexposed isopods. In the first part of the study we identify 24 new metabolites that had not been described previously. On the second part of the study a metabolomic profile variation of abstract non-exposed organism throughout the exposure was presented and finally the metabolomic profile of organisms exposed to dimethoate and nickel. The exposure to nickel suggested alteration in growth, moult, haemocyanin and glutathione synthesis, energy pathways and in osmoregulation. As for the exposure to dimethoate alterations in osmoregulation, energy pathways, moult and neurotransmission were also suggested. In this work it was also presented the first full body transcriptome of a terrestrial isopod from the species Porcellionides pruinosus, which will complement the scarce information available for this group of organisms. This transcriptome also served as base for a RNA-Seq and a RT-qPCR analysis. The results of the RNA-Seq analysis performed in organisms exposed to nickel showed that this stressor negatively impacted at the genetic and epigenetic levels, in the trafficking, storage and elimination of metals, generates oxidative stress, inducing neurotoxicity and also affecting reproduction. These results were confirmed through RT-qPCR. As for the impact of dimethoate on these organisms it was only accessed through RT-qPCR and showed oxidative stress, an impact in neurotransmission, in epigenetic markers, DNA repair and cell cycle impairment. This study allowed the design of an Adverse Outcome Pathway draft that can be used further on for legislative purposes.

Nanocomposites as probes for biodetection by SERS

The present work aimed to explore the potential of new nanocomposites based on carbon nanostructures and metal nanoparticles for the detection of biomolecules through surface enhanced Raman scattering (SERS). In a first step, polyvinyl alcohol composites were prepared incorporating silver nanoparticles by two different reduction procedures. At first without introduction of carbon nanostructures. These composites showed good results for the SERS identification of nucleic acids. Next, the synthesis and characterization of graphene oxide was studied to be used in the preparation of silver and gold nanocomposites. The reduction of this nanomaterial with different chemical agents was explored, since its reduction degree may be a determinant factor for the application envisaged (biomolecules interaction). The preparation of the nanocomposites with silver and gold was performed with different reducing agents. The SERS activity of these new nanocomposites was then explored in the presence of different analytes, varying the experimental conditions for Raman spectra acquisition. It was interesting to verify that the silver containing nanocomposites presented the particularity to intensify the graphene D and G bands. It is also important to highlight that a new eco-friendly reducing agent was tested for the synthesis of the graphene oxide composites, an Eucalyptus Globulus extract. Other variable introduced was the preparation of gold nanostars synthesized with hydroxylamine in the presence of graphene oxide, which allowed the preparation of a new nanocomposite with SERS potential. Fibrous membranes were also prepared by electrospinning with the aim to prepare SERS supports with adequate topography and porosity for the formation of nanoparticles agglomerates for the creation of the so-called hot-spots and also to allow the penetration of the analyte molecules. The polymers polyvinyl alcohol and polyacrylonitrile were selected for electrospinning. Using this technique, electrospun mantles with silver and gold nanoparticles and nanocomposites were prepared. Several variables were studied, such as the introduction of the nano-fillers during the electrospinning process, later deposition of the nano-fillers on the simple electrospun polymeric fibres and surface functionalization of the simple polymeric membranes to link the nano-fillers. At last, the potentialities of using carbon nanotubes forests, produced by chemical vapor deposition and coated with gold film by sputtering, as new SERS substrates were explored. It was found that the SERS detection of DNA bases and ADN itself is possible using these substrates.

Diamond microelectrodes for corrosion studies

Este trabalho teve como objetivos a produção, caracterização e aplicação de microelétrodos (MEs) de diamante como sensores amperométricos e potenciométricos em sistemas de corrosão nos quais a agressividade do meio e a presença de produtos de corrosão, constituem obstáculos que podem diminuir o desempenho, ou inviabilizar a utilização, de outros tipos de sensores. Os microeléctrodos são baseados em filmes finos de diamante dopado com boro (BDD – Boron Doped Diamond) depositados sobre fios de tungsténio afiados, através do método de deposição química a partir da fase vapor, assistida por filamento quente (HFCVD – Hot Filament Chemical Vapor Deposition). A otimização das diversas etapas de fabricação dos MEs deu origem ao desenvolvimento de um novo sistema de afiamento eletroquímico para obtenção destes fios e a várias opções para a obtenção dos filmes de diamante condutor e seu isolamento com resinas para exposição apenas da ponta cilíndrica. A qualidade cristalina dos filmes de diamante foi avaliada por espectroscopia de Raman. Esta informação foi complementada com uma caracterização microestrutural dos filmes de diamante por microscopia eletrónica de varrimento (SEM), em que se fez a identificação da tipologia dos cristais como pertencendo às gamas de diamante nanocristalino ou microcristalino. Os filmes de BDD foram utilizados na sua forma não modificada, com terminações em hidrogénio e também com modificação da superfície através de tratamentos de plasma RF de CF4 e O2 indutores de terminações C-F no primeiro caso e de grupos C=O, C-O-C e C-OH no segundo, tal como determinado por XPS. A caracterização eletroquímica dos MEs não modificados revelou uma resposta voltamétrica com elevada razão sinal/ruído e baixa corrente capacitiva, numa gama de polarização quasi-ideal com extensão de 3 V a 4 V, dependente dos parâmetros de crescimento e pós-tratamentos de superfície. Estudou-se a reversibilidade de algumas reações heterogéneas com os pares redox Fe(CN)6 3-/4- e FcOH0/+ e verificou-se que a constante cinética, k0, é mais elevada em elétrodos com terminações em hidrogénio, nos quais não se procedeu a qualquer modificação da superfície. Estes MEs não modificados foram também testados na deteção de Zn2+ onde se observou, por voltametria cíclica, que a detecção da redução deste ião é linear numa escala log-log na gama de 10-5-10-2 M em 5 mM NaCl. Realizaram-se também estudos em sistemas de corrosão modelares, em que os microeléctrodos foram usados como sensores amperométricos para mapear a distribuição de oxigénio e Zn2+ sobre um par galvânico Zn-Fe, com recurso a um sistema SVET (Scanning Vibrating Electrode Technique). Foi possível detetar, com resolução lateral de 100 μm, um decréscimo da concentração de O2 junto a ambos os metais e produção de catiões de zinco no ânodo. Contudo verificou-se uma significativa deposição de zinco metálico na superfície dos ME utilizados. Os MEs com superfície modificada por plasma de CF4 foram testados como sensores de oxigénio dissolvido. A calibração dos microeléctrodos foi efetuada simultaneamente por voltametria cíclica e medição óptica através de um sensor de oxigénio comercial. Determinou-se uma sensibilidade de ~0.1422 nA/μM, com um limite de deteção de 0.63 μM. Os MEs modificados com CF4 foram também testados como sensores amperométricos com os quais se observou sensibilidade ao oxigénio dissolvido em solução, tendo sido igualmente utilizados durante a corrosão galvânica de pares Zn-Fe. Em alguns casos foi conseguida sensibilidade ao ião Zn2+ sem que o efeito da contaminação superficial com zinco metálico se fizesse sentir. Os microeléctrodos tratados em plasma de CF4 permitem uma boa deteção da distribuição de oxigénio, exibindo uma resposta mais rápida que os não tratados além de maior estabilidade de medição e durabilidade. Nos MEs em que a superfície foi modificada com plasma de O2 foi possível detetar, por cronopotenciometria a corrente nula, uma sensibilidade ao pH de ~51 mV/pH numa gama de pH 2 a pH 12. Este comportamento foi associado à contribuição determinante de grupos C-O e C=O, observados por XPS com uma razão O/C de 0,16. Estes MEs foram igualmente testados durante a corrosão galvânica do par Zn-Fe onde foi possível mapear a distribuição de pH associada ao desenvolvimento de regiões alcalinas causadas pela redução do oxigénio, acima da região catódica, e de regiões ácidas decorrentes da dissolução anódica do ânodo de zinco. Com o par galvânico imerso em 50 mM NaCl registou-se uma variação de pH aproximadamente entre 4,8 acima do ânodo de zinco a 9,3 sobre o cátodo de ferro. A utilização pioneira destes MEs como sensores de pH é uma alternativa promissora aos elétrodos baseados em membranas seletivas.

Ecological quality assessment in transitional systems

Estuaries are poles of attraction for human settlement which is a source of pressures to surface water bodies. The implementation of the European Water Framework Directive (WDF, 2000/60/EC) has increased the investigation in order to develop methodologies to assess the Ecological Quality Status (EQS) of aquatic ecosystems. Transitional systems are naturally stressed and characterized by highly dynamic physical, chemical and hydro-morphologic conditions and by species with a higher level of tolerance to change, being more difficult to develop suitable quality indicators for these systems. The general purpose of this study is to test the ability of synthesis descriptors, including primary (S, taxa richness) and derived biological variable (H’, Shannon-Wiener diversity), biotic indices (AMBI and M-AMBI), body size properties (abundance distribution by body size classes, length, weight and length-weight relationships) and non-taxonomic indices (ISS), as well as functional indicators related to the decomposition rates of various experimental substrates, a macrophyte (Phragmites australis) and an alga (Fucus vesiculosus), to evaluate the environmental quality in transitional systems. This study was carried out in one of the most pristine channels of the Ria the Aveiro, Mira Channel, along a full salinity gradient and in a metals and metalloid sediment contamination area, the Estarreja Channel, and two reference channels (Canelas and Salreu). In this study were used different sampling techniques, the leaf-bag technique and a hand-held corer. In Mira Channel, the alga and the macrophyte presented an opposite trend in the decomposition rate along the salinity gradient, with the decomposition rates of the alga always higher than those of the macrophyte. The decomposition rates of the macrophyte and the alga were higher in the mid estuary and in higher salinity areas, respectively, corresponding to the preferencial distribution areas of each species. The macrobenthic fauna associated with the decaying and an artificial substrate (control) showed equally well the benthic succession from the marine to the freshwater areas and, despite the strong differences in the decay rates, no significant differences were found between the benthic communities associated with the alga and the macrophyte. The body size properties of the macrobenthic fauna associated with the P. australis leaf-bag (1mm and 5mm) and corer samples were studied along the full salinity gradient. The dominant species of the sub-set of measured specimens were not the same of the original macrobenthic fauna sampled but, despite that, the sub-set of measured specimens was also able to show the benthic succession from the marine to the freshwater areas. The body size abundance distribution of the benthic macroinvertebrates according to the ISS size classes did not show a particular trend in any sampler along the salinity gradient. Significant differences were found in the length, weight and length-weight relationships of Annelids, , Molluscs and even some species along the salinity gradient. No significant differences were found in the AMBI, M-AMBI and ISS values along the salinity gradient for all the samplers. The EQS of the corer samples obtained using the M-AMBI was lower than that of the leaf-bags. The EQS obtained with the ISS was higher than that obtained with the M-AMBI in the leaf-bags but not in the corer samples. The ecological effects of contaminated sediments associated with the industrial chemical effluents discharged in the Estarreja Channel were studied a decade after ceasing the emissions, using the Sediment Quality Triad approach and two reference channels. The results showed that despite the emissions ceased in 2004, the sediment remains polluted with high levels of metals and metalloid, available to bioaccumulation and with severe consequences at the community level. The sediment contamination problem was also studied using the leaf-bag technique with a macrophyte, an alga and a control substrate. The results showed that the decay rates, the associated macrofauna and the application of the AMBI, M-AMBI and ISS indices to the mesh-bag samples were not able to identify the sediment contamination. Contrarily to the AMBI, the M-AMBI and the ISS showed significant differences between the contaminated and the reference channels for the corer samples. Although such statistical significance, the interest of using these complex biotic indices could be questioned, when much simple ones, like the S and H’ allow to reach the same conclusions.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

Síntese de receptores para o reconhecimento e transporte de aniões

Nesta tese, realizada no âmbito do Programa Doutoral em Química da Universidade de Aveiro, foram desenvolvidas duas famílias de receptores sintéticos: macrocíclicos baseados na plataforma tetraazacalix[2]areno[2]triazina; e acíclicos construídos a partir de diaminas simples. A plataforma macrocíclica foi decorada nos átomos de azoto em ponte com unidades de reconhecimento molecular contendo fragmentos com grupos amida para o reconhecimento de aniões ou com grupos ácidos carboxílicos para a coordenação de metais de transição. Os receptores acíclicos foram obtidos por acoplamento de diaminas (etilenodiamina, orto-fenilenodiamina ou 2-aminobenzilamina) com uma unidade lipofílica incorporando um anel heterocíclico (derivados de oxadiazole ou furano) e com um derivado isocianato. Estas moléculas assimétricas com um grupo amida e um grupo ureia como unidades de reconhecimento molecular foram avaliadas como receptores e transportadores transmembranares de aniões biologicamente relevantes (Cl- e HCO3-). Os resultados experimentais obtidos serão descritos ao longo de três capítulos, após um primeiro capítulo bibliográfico. No Capítulo 1 começa-se por fazer uma revisão bibliográfica sucinta sobre o desenvolvimento recente de receptores funcionais baseados em azacalixarenos bem como das suas aplicações, designadamente no reconhecimento molecular. Numa segunda parte apresenta-se uma revisão sucinta de receptores derivados de (tio)ureias, relacionados com os receptores sintetizados no âmbito desta tese e com propriedades de reconhecimento e transporte transmembranar de aniões. No Capítulo 2 reporta-se uma série de macrociclos novos com os átomos de azoto em ponte de tetraazacalix[2]areno[2]triazina funcionalizados com bromoacetato de metilo. Foram preparados três novos macrociclos com quatro grupos éster, como braços pendentes, a partir de percursores tetraazacalix[2]areno[2]triazina com os anéis de triazina substituídos com cloro, metilamina ou hexilamina. Os grupos acetato foram hidrolisados em condições básicas, tendo cada um dos derivados dialquilamina originado um composto com quatro grupo carboxílicos, enquanto o análogo diclorado originou uma mistura de compostos com dois grupos carboxílico e com os átomos de cloro substituídos por grupos hidroxilo. Subsequentemente, as propriedades de coordenação dos derivados alquilamina para cobre(II) foram avaliadas por espectroscopia de UV-Vis, tendo-se obtido constantes de estabilidades semelhantes (logk ≈ 6,7). No Capítulo 3 descrevem-se três macrociclos obtidos através da funcionalização dos átomos de azoto em ponte de tetraazacalix[2]areno[2]triazina com grupos amida derivados de N-Boc-etilenodiamina, benzilamina e (S)-metilbenzilamina. A afinidade destes receptores para a série de aniões carboxilato (oxalato, malonato, succinato, glutarato, diglicolato, pimelato, suberato, fumarato, maleato, ftalato e isoftalato) e inorgânicos (Cl-, H2PO4- e SO42-) por titulação de RMN de 1H, foi avaliada. Estes macrociclos conjuntamente com os descritos no Capítulo 2 são os primeiros exemplos reportados na literatura de receptores sintéticos baseados na plataforma de tetraazacalix[2]areno[2]triazina com grupos funcionais nos azotos em ponte. O receptor derivado de N-Boc-etilenodiamina, com oito grupos N-H, entre os três receptores, é o que apresenta maior afinidade para os aniões estudados. No Capítulo 4 é descrita a síntese 59 compostos acíclicos (vide supra) obtidos em três passos de síntese com bons rendimentos. No design desta biblioteca de moléculas a afinidade para aniões dos grupos ureia foi modelada pela inserção de diferentes substituintes arilo ou alquilo, com propriedades electrónicas distintas. A introdução destes grupos em conjugação com um anel de oxadiazole ou furano permitiu também modelar a lipofília destes compostos. A afinidade destes receptores para aniões cloreto e bicarbonato, e em alguns casos para fumarato e maleato, foi investigada por titulação de RMN de 1H. Estes compostos apresentaram constantes de associações compatíveis com o transporte transmembranar de cloreto. Por outro lado estes receptores apresentaram afinidades elevadas para fumarato e maleato, com seletividade para este último. São também discutidos os resultados dos ensaios de transporte de cloreto por estes receptores através de vesículas de em POPC. No Capítulo 5 encontram-se as conclusões gerais desta tese de Doutoramento. No Capitulo 6 encontram-se os dados espectroscópicos e os restantes detalhes experimentais para todos os compostos sintetizados.

Cultivo da Salicornia ramosissima da Ilha dos Puxadoiros®

O estágio realizado teve como premissa principal perceber o comportamento da planta face ao seu crescimento em altura da própria planta e em número em função de diferentes épocas de sementeira, e de condições de cultivo, nomeadamente de tipos de solo. O trabalho realizado inclui todo o processo desde a apanha, preparação das sementes e dos campos, e a sementeira propriamente dita. Foi acompanhado o crescimento das plantas em 3 alturas diferentes, por contagem do número de plantas e do comprimento das plantas aéreas. Igualmente foram realizadas análises da granulometria dos solos. Determinaram-se os metais pesados nos solos e nas plantas, assim como os açúcares após a hidrólise e derivatização das amostras liofilizadas, tanto da raíz como da parte aérea. Foi possível concluir que a planta nasce com maior abundância em solos franco-siltosos do que em solos franco-arenosos, onde o seu crescimento é muito pobre ou mesmo nulo. Os valores de cádmio e chumbo encontram-se a níveis adequados para o consumo humano. Coloca-se a hipótese da existência de arabinoglucoronoxilanas como constituinte da raiz desta planta.