Context-based wireless mesh networks

In the modern society, new devices, applications and technologies, with sophisticated capabilities, are converging in the same network infrastructure. Users are also increasingly demanding in personal preferences and expectations, desiring Internet connectivity anytime and everywhere. These aspects have triggered many research efforts, since the current Internet is reaching a breaking point trying to provide enough flexibility for users and profits for operators, while dealing with the complex requirements raised by the recent evolution. Fully aligned with the future Internet research, many solutions have been proposed to enhance the current Internet-based architectures and protocols, in order to become context-aware, that is, to be dynamically adapted to the change of the information characterizing any network entity. In this sense, the presented Thesis proposes a new architecture that allows to create several networks with different characteristics according to their context, on the top of a single Wireless Mesh Network (WMN), which infrastructure and protocols are very flexible and self-adaptable. More specifically, this Thesis models the context of users, which can span from their security, cost and mobility preferences, devices’ capabilities or services’ quality requirements, in order to turn a WMN into a set of logical networks. Each logical network is configured to meet a set of user context needs (for instance, support of high mobility and low security). To implement this user-centric architecture, this Thesis uses the network virtualization, which has often been advocated as a mean to deploy independent network architectures and services towards the future Internet, while allowing a dynamic resource management. This way, network virtualization can allow a flexible and programmable configuration of a WMN, in order to be shared by multiple logical networks (or virtual networks - VNs). Moreover, the high level of isolation introduced by network virtualization can be used to differentiate the protocols and mechanisms of each context-aware VN. This architecture raises several challenges to control and manage the VNs on-demand, in response to user and WMN dynamics. In this context, we target the mechanisms to: (i) discover and select the VN to assign to an user; (ii) create, adapt and remove the VN topologies and routes. We also explore how the rate of variation of the user context requirements can be considered to improve the performance and reduce the complexity of the VN control and management. Finally, due to the scalability limitations of centralized control solutions, we propose a mechanism to distribute the control functionalities along the architectural entities, which can cooperate to control and manage the VNs in a distributed way.

Control design for multicast-aware class-based networks

The expectations of citizens from the Information Technologies (ITs) are increasing as the ITs have become integral part of our society, serving all kinds of activities whether professional, leisure, safety-critical applications or business. Hence, the limitations of the traditional network designs to provide innovative and enhanced services and applications motivated a consensus to integrate all services over packet switching infrastructures, using the Internet Protocol, so as to leverage flexible control and economical benefits in the Next Generation Networks (NGNs). However, the Internet is not capable of treating services differently while each service has its own requirements (e.g., Quality of Service - QoS). Therefore, the need for more evolved forms of communications has driven to radical changes of architectural and layering designs which demand appropriate solutions for service admission and network resources control. This Thesis addresses QoS and network control issues, aiming to improve overall control performance in current and future networks which classify services into classes. The Thesis is divided into three parts. In the first part, we propose two resource over-reservation algorithms, a Class-based bandwidth Over-Reservation (COR) and an Enhanced COR (ECOR). The over-reservation means reserving more bandwidth than a Class of Service (CoS) needs, so the QoS reservation signalling rate is reduced. COR and ECOR allow for dynamically defining over-reservation parameters for CoSs based on network interfaces resource conditions; they aim to reduce QoS signalling and related overhead without incurring CoS starvation or waste of bandwidth. ECOR differs from COR by allowing for optimizing control overhead minimization. Further, we propose a centralized control mechanism called Advanced Centralization Architecture (ACA), that uses a single state-full Control Decision Point (CDP) which maintains a good view of its underlying network topology and the related links resource statistics on real-time basis to control the overall network. It is very important to mention that, in this Thesis, we use multicast trees as the basis for session transport, not only for group communication purposes, but mainly to pin packets of a session mapped to a tree to follow the desired tree. Our simulation results prove a drastic reduction of QoS control signalling and the related overhead without QoS violation or waste of resources. Besides, we provide a generic-purpose analytical model to assess the impact of various parameters (e.g., link capacity, session dynamics, etc.) that generally challenge resource overprovisioning control. In the second part of this Thesis, we propose a decentralization control mechanism called Advanced Class-based resource OverpRovisioning (ACOR), that aims to achieve better scalability than the ACA approach. ACOR enables multiple CDPs, distributed at network edge, to cooperate and exchange appropriate control data (e.g., trees and bandwidth usage information) such that each CDP is able to maintain a good knowledge of the network topology and the related links resource statistics on real-time basis. From scalability perspective, ACOR cooperation is selective, meaning that control information is exchanged dynamically among only the CDPs which are concerned (correlated). Moreover, the synchronization is carried out through our proposed concept of Virtual Over-Provisioned Resource (VOPR), which is a share of over-reservations of each interface to each tree that uses the interface. Thus, each CDP can process several session requests over a tree without requiring synchronization between the correlated CDPs as long as the VOPR of the tree is not exhausted. Analytical and simulation results demonstrate that aggregate over-reservation control in decentralized scenarios keep low signalling without QoS violations or waste of resources. We also introduced a control signalling protocol called ACOR Protocol (ACOR-P) to support the centralization and decentralization designs in this Thesis. Further, we propose an Extended ACOR (E-ACOR) which aggregates the VOPR of all trees that originate at the same CDP, and more session requests can be processed without synchronization when compared with ACOR. In addition, E-ACOR introduces a mechanism to efficiently track network congestion information to prevent unnecessary synchronization during congestion time when VOPRs would exhaust upon every session request. The performance evaluation through analytical and simulation results proves the superiority of E-ACOR in minimizing overall control signalling overhead while keeping all advantages of ACOR, that is, without incurring QoS violations or waste of resources. The last part of this Thesis includes the Survivable ACOR (SACOR) proposal to support stable operations of the QoS and network control mechanisms in case of failures and recoveries (e.g., of links and nodes). The performance results show flexible survivability characterized by fast convergence time and differentiation of traffic re-routing under efficient resource utilization i.e. without wasting bandwidth. In summary, the QoS and architectural control mechanisms proposed in this Thesis provide efficient and scalable support for network control key sub-systems (e.g., QoS and resource control, traffic engineering, multicasting, etc.), and thus allow for optimizing network overall control performance.

Educação para o desenvolvimento sustentável no ensino básico : contributos da integração das tecnologias da informação e comunicação e do envolvimento familiar nos primeiros anos de escolaridade

A necessidade de se educar para o desenvolvimento sustentável é um ponto assente nas atuais políticas educativas internacionais. Considera-se fulcral desenvolver nos alunos as competências necessárias para analisar criticamente e tomar de decisão frente às atuais problemáticas relacionadas com as dimensões ambiental, social e económica, sob uma perspetiva sistémica. No entanto, a literatura de referência aponta a escassez de recursos intencionalmente concebidos para apoiar práticas didático-pedagógicas dos professores mais coerentes com estas diretrizes. Assim, o presente estudo tem por finalidade desenvolver estratégias, conceber e explorar recursos didáticos multimédia para promover a Educação para o Desenvolvimento Sustentável (EDS), no contexto da Educação em Ciência com orientação Ciência-Tecnologia-Sociedade (CTS), através da integração das Tecnologias da Informação e Comunicação (TIC) e do envolvimento familiar (EF) nos primeiros anos de escolaridade, assim como compreender os impactes dos mesmos na alteração das práticas dos professores tornando-as mais coerentes com as orientações EDS/CTS. Face a esta finalidade, adotámos uma metodologia de natureza qualitativa, nomeadamente o Estudo de Caso na vertente multicasos, ao longo da investigação. O estudo envolveu o 1º Ciclo do Ensino Básico de um Agrupamento de Escolas de Aveiro (Portugal), nomeadamente professores, alunos e respetivos familiares. Por entender serem os professores um elemento-chave de mudança do processo educativo, o estudo envolveu a conceção e implementação de uma Oficina de Formação de professores e uma comunidade online, a servir de plataforma de comunicação entre as escolas e as famílias. Assim, para a recolha de dados recorremos às técnicas de inquérito, observação e análise documental. Os respetivos instrumentos utilizados para cada técnica foram questionários, diário da investigadora, e-portefólios reflexivos e registos de interação na comunidade online. Os dados qualitativos e quantitativos foram analisados através da técnica de análise de conteúdo e análise estatística descritiva, respetivamente. Os resultados apontam que a integração das TIC e o incentivo ao envolvimento familiar contribuem positivamente para a promoção da EDS nos primeiros anos de escolaridade. Contudo, considerando o contexto em estudo onde as escolas atendem muitas famílias provenientes de meios socioeconómicos menos favorecidos, é preciso repensar a integração das TIC, para que estas não se configurem como mais uma barreira para o envolvimento familiar. Assim, trabalhar a EDS/CTS para além dos muros da escola, envolvendo as famílias dos alunos e colocando as TIC como uma ponte de comunicação é apresentado nesta investigação como o principal contributo para a consecução da EDS.

Social-aware opportunistic routing

The increased capabilities (e.g., processing, storage) of portable devices along with the constant need of users to retrieve and send information have introduced a new form of communication. Users can seamlessly exchange data by means of opportunistic contacts among them and this is what characterizes the opportunistic networks (OppNets). OppNets allow users to communicate even when an end-to-end path may not exist between them. Since 2007, there has been a trend to improve the exchange of data by considering social similarity metrics. Social relationships, shared interests, and popularity are examples of such metrics that have been employed successfully: as users interact based on relationships and interests, this information can be used to decide on the best next forwarders of information. This Thesis work combines the features of today's devices found in the regular urban environment with the current social-awareness trend in the context of opportunistic routing. To achieve this goal, this work was divided into di erent tasks that map to a set of speci c objectives, leading to the following contributions: i) an up-to-date opportunistic routing taxonomy; ii) a universal evaluation framework that aids in devising and testing new routing proposals; iii) three social-aware utility functions that consider the dynamic user behavior and can be easily incorporated to other routing proposals; iv) two opportunistic routing proposals based on the users' daily routines and on the content traversing the network and interest of users in such content; and v) a structure analysis of the social-based network formed based on the approaches devised in this work.

Advanced optical modulation and format conversion

Over the years, the increased search and exchange of information lead to an increase of traffic intensity in todays optical communication networks. Coherent communications, using the amplitude and phase of the signal, reappears as one of the transmission techniques to increase the spectral efficiency and throughput of optical channels. In this context, this work present a study on format conversion of modulated signals using MZI-SOAs, based exclusively on all- optical techniques through wavelength conversion. This approach, when applied in interconnection nodes between optical networks with different bit rates and modulation formats, allow a better efficiency and scalability of the network. We start with an experimental characterization of the static and dynamic properties of the MZI-SOA. Then, we propose a semi-analytical model to describe the evolution of phase and amplitude at the output of the MZI-SOA. The model’s coefficients are obtained using a multi-objective genetic algorithm. We validate the model experimentally, by exploring the dependency of the optical signal with the operational parameters of the MZI-SOA. We also propose an all-optical technique for the conversion of amplitude modulation signals to a continuous phase modulation format. Finally, we study the potential of MZI-SOAs for the conversion of amplitude signals to QPSK and QAM signals. We show the dependency of the conversion process with the operational parameters deviation from the optimal values. The technique is experimentally validated for QPSK modulation.

Cooperative positioning for heterogeneous wireless systems

Future emerging market trends head towards positioning based services placing a new perspective on the way we obtain and exploit positioning information. On one hand, innovations in information technology and wireless communication systems enabled the development of numerous location based applications such as vehicle navigation and tracking, sensor networks applications, home automation, asset management, security and context aware location services. On the other hand, wireless networks themselves may bene t from localization information to improve the performances of di erent network layers. Location based routing, synchronization, interference cancellation are prime examples of applications where location information can be useful. Typical positioning solutions rely on measurements and exploitation of distance dependent signal metrics, such as the received signal strength, time of arrival or angle of arrival. They are cheaper and easier to implement than the dedicated positioning systems based on ngerprinting, but at the cost of accuracy. Therefore intelligent localization algorithms and signal processing techniques have to be applied to mitigate the lack of accuracy in distance estimates. Cooperation between nodes is used in cases where conventional positioning techniques do not perform well due to lack of existing infrastructure, or obstructed indoor environment. The objective is to concentrate on hybrid architecture where some nodes have points of attachment to an infrastructure, and simultaneously are interconnected via short-range ad hoc links. The availability of more capable handsets enables more innovative scenarios that take advantage of multiple radio access networks as well as peer-to-peer links for positioning. Link selection is used to optimize the tradeo between the power consumption of participating nodes and the quality of target localization. The Geometric Dilution of Precision and the Cramer-Rao Lower Bound can be used as criteria for choosing the appropriate set of anchor nodes and corresponding measurements before attempting location estimation itself. This work analyzes the existing solutions for node selection in order to improve localization performance, and proposes a novel method based on utility functions. The proposed method is then extended to mobile and heterogeneous environments. Simulations have been carried out, as well as evaluation with real measurement data. In addition, some speci c cases have been considered, such as localization in ill-conditioned scenarios and the use of negative information. The proposed approaches have shown to enhance estimation accuracy, whilst signi cantly reducing complexity, power consumption and signalling overhead.

Inter layer and cooperative design strategies for green mobile networks

The promise of a truly mobile experience is to have the freedom to roam around anywhere and not be bound to a single location. However, the energy required to keep mobile devices connected to the network over extended periods of time quickly dissipates. In fact, energy is a critical resource in the design of wireless networks since wireless devices are usually powered by batteries. Furthermore, multi-standard mobile devices are allowing users to enjoy higher data rates with ubiquitous connectivity. However, the bene ts gained from multiple interfaces come at a cost in terms of energy consumption having profound e ect on the mobile battery lifetime and standby time. This concern is rea rmed by the fact that battery lifetime is one of the top reasons why consumers are deterred from using advanced multimedia services on their mobile on a frequent basis. In order to secure market penetration for next generation services energy e ciency needs to be placed at the forefront of system design. However, despite recent e orts, energy compliant features in legacy technologies are still in its infancy, and new disruptive architectures coupled with interdisciplinary design approaches are required in order to not only promote the energy gain within a single protocol layer, but to enhance the energy gain from a holistic perspective. A promising approach is cooperative smart systems, that in addition to exploiting context information, are entities that are able to form a coalition and cooperate in order to achieve a common goal. Migrating from this baseline, this thesis investigates how these technology paradigm can be applied towards reducing the energy consumption in mobile networks. In addition, we introduce an additional energy saving dimension by adopting an interlayer design so that protocol layers are designed to work in synergy with the host system, rather than independently, for harnessing energy. In this work, we exploit context information, cooperation and inter-layer design for developing new energy e cient and technology agnostic building blocks for mobile networks. These technology enablers include energy e cient node discovery and short-range cooperation for energy saving in mobile handsets, complemented by energy-aware smart scheduling for promoting energy saving on the network side. Analytical and simulations results were obtained, and veri ed in the lab on a real hardware testbed. Results have shown that up to 50% energy saving could be obtained.

On the application of optimal control techniques in lossy fieldbuses

The performance of real-time networks is under continuous improvement as a result of several trends in the digital world. However, these tendencies not only cause improvements, but also exacerbates a series of unideal aspects of real-time networks such as communication latency, jitter of the latency and packet drop rate. This Thesis focuses on the communication errors that appear on such realtime networks, from the point-of-view of automatic control. Specifically, it investigates the effects of packet drops in automatic control over fieldbuses, as well as the architectures and optimal techniques for their compensation. Firstly, a new approach to address the problems that rise in virtue of such packet drops, is proposed. This novel approach is based on the simultaneous transmission of several values in a single message. Such messages can be from sensor to controller, in which case they are comprised of several past sensor readings, or from controller to actuator in which case they are comprised of estimates of several future control values. A series of tests reveal the advantages of this approach. The above-explained approach is then expanded as to accommodate the techniques of contemporary optimal control. However, unlike the aforementioned approach, that deliberately does not send certain messages in order to make a more efficient use of network resources; in the second case, the techniques are used to reduce the effects of packet losses. After these two approaches that are based on data aggregation, it is also studied the optimal control in packet dropping fieldbuses, using generalized actuator output functions. This study ends with the development of a new optimal controller, as well as the function, among the generalized functions that dictate the actuator’s behaviour in the absence of a new control message, that leads to the optimal performance. The Thesis also presents a different line of research, related with the output oscillations that take place as a consequence of the use of classic co-design techniques of networked control. The proposed algorithm has the goal of allowing the execution of such classical co-design algorithms without causing an output oscillation that increases the value of the cost function. Such increases may, under certain circumstances, negate the advantages of the application of the classical co-design techniques. A yet another line of research, investigated algorithms, more efficient than contemporary ones, to generate task execution sequences that guarantee that at least a given number of activated jobs will be executed out of every set composed by a predetermined number of contiguous activations. This algorithm may, in the future, be applied to the generation of message transmission patterns in the above-mentioned techniques for the efficient use of network resources. The proposed task generation algorithm is better than its predecessors in the sense that it is capable of scheduling systems that cannot be scheduled by its predecessor algorithms. The Thesis also presents a mechanism that allows to perform multi-path routing in wireless sensor networks, while ensuring that no value will be counted in duplicate. Thereby, this technique improves the performance of wireless sensor networks, rendering them more suitable for control applications. As mentioned before, this Thesis is centered around techniques for the improvement of performance of distributed control systems in which several elements are connected through a fieldbus that may be subject to packet drops. The first three approaches are directly related to this topic, with the first two approaching the problem from an architectural standpoint, whereas the third one does so from more theoretical grounds. The fourth approach ensures that the approaches to this and similar problems that can be found in the literature that try to achieve goals similar to objectives of this Thesis, can do so without causing other problems that may invalidate the solutions in question. Then, the thesis presents an approach to the problem dealt with in it, which is centered in the efficient generation of the transmission patterns that are used in the aforementioned approaches.

Communication between nodes for autonomic and distributed management

Over the last decade, the most widespread approaches for traditional management were based on the Simple Network Management Protocol (SNMP) or Common Management Information Protocol (CMIP). However, they both have several problems in terms of scalability, due to their centralization characteristics. Although the distributed management approaches exhibit better performance in terms of scalability, they still underperform regarding communication costs, autonomy, extensibility, exibility, robustness, and cooperation between network nodes. The cooperation between network nodes normally requires excessive overheads for synchronization and dissemination of management information in the network. For emerging dynamic and large-scale networking environments, as envisioned in Next Generation Networks (NGNs), exponential growth in the number of network devices and mobile communications and application demands is expected. Thus, a high degree of management automation is an important requirement, along with new mechanisms that promote it optimally and e ciently, taking into account the need for high cooperation between the nodes. Current approaches for self and autonomic management allow the network administrator to manage large areas, performing fast reaction and e ciently facing unexpected problems. The management functionalities should be delegated to a self-organized plane operating within the network, that decrease the network complexity and the control information ow, as opposed to centralized or external servers. This Thesis aims to propose and develop a communication framework for distributed network management which integrates a set of mechanisms for initial communication, exchange of management information, network (re) organization and data dissemination, attempting to meet the autonomic and distributed management requirements posed by NGNs. The mechanisms are lightweight and portable, and they can operate in di erent hardware architectures and include all the requirements to maintain the basis for an e cient communication between nodes in order to ensure autonomic network management. Moreover, those mechanisms were explored in diverse network conditions and events, such as device and link errors, di erent tra c/network loads and requirements. The results obtained through simulation and real experimentation show that the proposed mechanisms provide a lower convergence time, smaller overhead impact in the network, faster dissemination of management information, increase stability and quality of the nodes associations, and enable the support for e cient data information delivery in comparison to the base mechanisms analyzed. Finally, all mechanisms for communication between nodes proposed in this Thesis, that support and distribute the management information and network control functionalities, were devised and developed to operate in completely decentralized scenarios.

Advanced energy efficient coordinated multi-point transmission for OFDMA

The ever-growing energy consumption in mobile networks stimulated by the expected growth in data tra ffic has provided the impetus for mobile operators to refocus network design, planning and deployment towards reducing the cost per bit, whilst at the same time providing a signifi cant step towards reducing their operational expenditure. As a step towards incorporating cost-eff ective mobile system, 3GPP LTE-Advanced has adopted the coordinated multi-point (CoMP) transmission technique due to its ability to mitigate and manage inter-cell interference (ICI). Using CoMP the cell average and cell edge throughput are boosted. However, there is room for reducing energy consumption further by exploiting the inherent exibility of dynamic resource allocation protocols. To this end packet scheduler plays the central role in determining the overall performance of the 3GPP longterm evolution (LTE) based on packet-switching operation and provide a potential research playground for optimizing energy consumption in future networks. In this thesis we investigate the baseline performance for down link CoMP using traditional scheduling approaches, and subsequently go beyond and propose novel energy e fficient scheduling (EES) strategies that can achieve power-e fficient transmission to the UEs whilst enabling both system energy effi ciency gain and fairness improvement. However, ICI can still be prominent when multiple nodes use common resources with di fferent power levels inside the cell, as in the so called heterogeneous networks (Het- Net) environment. HetNets are comprised of two or more tiers of cells. The rst, or higher tier, is a traditional deployment of cell sites, often referred to in this context as macrocells. The lower tiers are termed small cells, and can appear as microcell, picocells or femtocells. The HetNet has attracted signiffi cant interest by key manufacturers as one of the enablers for high speed data at low cost. Research until now has revealed several key hurdles that must be overcome before HetNets can achieve their full potential: bottlenecks in the backhaul must be alleviated, as well as their seamless interworking with CoMP. In this thesis we explore exactly the latter hurdle, and present innovative ideas on advancing CoMP to work in synergy with HetNet deployment, complemented by a novel resource allocation policy for HetNet tighter interference management. As system level simulator has been used to analyze the proposed algorithm/protocols, and results have concluded that up to 20% energy gain can be observed.

Modelo para a valorização partilhada da marca: a comunicação mediada por computador como suporte ao envolvimento dos recursos humanos na cocriação da marca organizacional

No atual contexto de disseminação e uso das tecnologias da comunicação para a geração de conteúdo não especializado, igualmente partilhado e utilizado, torna-se pertinente sublinhar a participação dos recursos humanos na cocriação da marca organizacional. Esta participação, todavia, encontra alguns constrangimentos e necessidades, tais como a falta de orientação no uso devido da marca gráfica, e a adequação das ferramentas comunicacionais e de gestão do conhecimento de que estes indivíduos são portadores. Neste enquadramento, pretende-se validar um modelo heurístico que explique, satisfatoriamente, de que forma as organizações podem envolver os seus recursos humanos em atividades de valorização da marca, em contextos de informação e comunicação tecnologicamente mediados, e que possa assumirse como um impulsionador da adoção destas práticas. A abordagem metodológica é de natureza exploratória, iterativa e qualitativa, assentando na Grounded Theory e, portanto, num processo indutivo de produção de conhecimento, reconhecendo a existência de momentos de descoberta e, aproximando-se do paradigma construtivista. O estudo que conduz à proposta final de um modelo de comunicação mediada por computador para a valorização da marca assenta, essencialmente, na revisão da literatura através da pesquisa bibliográfica, e num estudo de caso, que assume como procedimentos técnicos os inquéritos por entrevista, para uma primeira verificação dos pressupostos do modelo, a construção de um protótipo não-funcional de uma Central Participativa de Marca (CPM), capaz de expressar a componente tecnológica presente no modelo, e a realização de grupos focais, com o intuito de alcançar a sua validação não-experimental. O estudo de caso realizado debruça-se sobre a Universidade de Aveiro (UA) e sobre o uso e apropriação da sua marca, por parte dos membros da sua comunidade docente e não-docente. Os resultados das entrevistas exploratórias, para as quais se recorre a uma amostra por conveniência composta por entidades relevantes no que à promoção da marca da UA concerne, são combinados com os conteúdos extraídos do levantamento bibliográfico, de modo a serem contemplados tanto na aferição dos domínios de interação que informam o modelo, como na conceção do protótipo de uma plataforma de colaboração online, especificamente orientada à marca, apresentado a cinco grupos focais que neles integram a população-alvo estudada. Este estudo empírico permite uma primeira validação do modelo heurístico proposto, confirmando que a participação na cocriação de artefactos de marca tende a acontecer de forma não oficial, por falta de iniciativas organizacionais que valorizem o capital humano, e que a orientação para o uso e apropriação da marca é fundamental na concretização deste tipo de contributos, dados por indivíduos não especializados em branding, design, comunicação ou estratégia de marketing. Os resultados permitem validar ainda a configuração e a estrutura de interação propostas para o sistema subjacente ao protótipo da CPM, assim como a generalidade das suas funcionalidades, permitindo a proposta de uma heurística focada na experimentação da marca no seio organizacional. Finalmente, são identificadas linhas de investigação futura nesta área, decorrentes dos resultados alcançados e das limitações do estudo realizado.

Contributos para a eficácia do clustering usando o tagging social

Nos últimos anos temos vindo a assistir a uma mudança na forma como a informação é disponibilizada online. O surgimento da web para todos possibilitou a fácil edição, disponibilização e partilha da informação gerando um considerável aumento da mesma. Rapidamente surgiram sistemas que permitem a coleção e partilha dessa informação, que para além de possibilitarem a coleção dos recursos também permitem que os utilizadores a descrevam utilizando tags ou comentários. A organização automática dessa informação é um dos maiores desafios no contexto da web atual. Apesar de existirem vários algoritmos de clustering, o compromisso entre a eficácia (formação de grupos que fazem sentido) e a eficiência (execução em tempo aceitável) é difícil de encontrar. Neste sentido, esta investigação tem por problemática aferir se um sistema de agrupamento automático de documentos, melhora a sua eficácia quando se integra um sistema de classificação social. Analisámos e discutimos dois métodos baseados no algoritmo k-means para o clustering de documentos e que possibilitam a integração do tagging social nesse processo. O primeiro permite a integração das tags diretamente no Vector Space Model e o segundo propõe a integração das tags para a seleção das sementes iniciais. O primeiro método permite que as tags sejam pesadas em função da sua ocorrência no documento através do parâmetro Social Slider. Este método foi criado tendo por base um modelo de predição que sugere que, quando se utiliza a similaridade dos cossenos, documentos que partilham tags ficam mais próximos enquanto que, no caso de não partilharem, ficam mais distantes. O segundo método deu origem a um algoritmo que denominamos k-C. Este para além de permitir a seleção inicial das sementes através de uma rede de tags também altera a forma como os novos centróides em cada iteração são calculados. A alteração ao cálculo dos centróides teve em consideração uma reflexão sobre a utilização da distância euclidiana e similaridade dos cossenos no algoritmo de clustering k-means. No contexto da avaliação dos algoritmos foram propostos dois algoritmos, o algoritmo da “Ground truth automática” e o algoritmo MCI. O primeiro permite a deteção da estrutura dos dados, caso seja desconhecida, e o segundo é uma medida de avaliação interna baseada na similaridade dos cossenos entre o documento mais próximo de cada documento. A análise de resultados preliminares sugere que a utilização do primeiro método de integração das tags no VSM tem mais impacto no algoritmo k-means do que no algoritmo k-C. Além disso, os resultados obtidos evidenciam que não existe correlação entre a escolha do parâmetro SS e a qualidade dos clusters. Neste sentido, os restantes testes foram conduzidos utilizando apenas o algoritmo k-C (sem integração de tags no VSM), sendo que os resultados obtidos indicam que a utilização deste algoritmo tende a gerar clusters mais eficazes.

O desenho da comunicação como conhecimento

As últimas décadas do séc. XX assistiram a um crescente protagonismo do Design de Informação que, desde então, tem sofrido inúmeras formas e designações, num processo de afirmação e auto descoberta. A proliferação de dados disponíveis deu ao design e em particular a este ramo do desenho para a compreensão, uma visibilidade crescente e a responsabilidade de encontrar, a partir da informação, novos meios para a construção de sentido. Do design à engenharia informática, são várias as disciplinas que convergem hoje nesse desígnio ainda que sob diferentes modelos e ferramentas. Esta convergência promove uma comparação entre modelos, que tendem a ser tanto mais valorizados quanto mais objectivas as representações. De Playfair a Bertin, as representações gráficas dos últimos duzentos anos têm-se situado no âmbito de disciplinas como a Economia, Sociologia ou a Gestão, explorando metáforas funcionais com vista à evidência da tradução numérica. O Design, enquanto mediador cultural e através do Desenho, tende a acrescentar ao mesmo exercício uma dimensão narrativa ou ilustrativa, convocando a própria existência do autor na interpretação dos mesmos dados numéricos. Com esta investigação, novos processos de semiose se oferecem, associando à objectividade dos dados quantitativos, a subjectividade da cultura formulada a partir do indivíduo enquanto intérprete. Na procura do conhecimento, reconhece-se assim que o desenho da informação ganha competências pela mediação da experiência, religando ética, técnica e estética.

A integração de media sociais nas organizações de gestão de destinos: proposta de um modelo orientador para a utilização de media sociais nas atividades de comunicação com os turistas

Sendo o turismo um dos setores económicos onde a informação desempenha um papel fundamental, é, também, um dos mais afetados com a chegada da nova realidade que são os media sociais. Atualmente, devido à utilização generalizada de aplicações da Web 2.0 e, sobretudo, devido ao crescimento exponencial da utilização de aplicações de media sociais, verifica-se que esta utilização está a provocar alterações significativas na promoção dos destinos turísticos, com uma estratégia clara destes passarem a utilizar os conteúdos gerados pelos utilizadores na Internet. Perante este novo paradigma, as Organizações de Gestão de Destinos, como organizações dinâmicas cujo objetivo é a promoção dos destinos turísticos, têm que se adaptar de forma a enquadrar esta nova realidade. O presente trabalho pretende, pois, analisar a forma como as Organizações de Gestão de Destinos portuguesas utilizam a Internet, e em particular as aplicações da Web 2.0/media sociais nas suas estratégias de comunicação. Assim, pretende-se fazer uma análise da situação atual em que se encontram as Organizações de Gestão de Destinos Portuguesas, na utilização deste tipo de aplicações para, a partir daí, se desenvolver uma proposta de modelo orientador para a utilização de media sociais nas atividades de comunicação com os turistas, que permita explorar ao máximo este enorme potencial. Como resultado desta investigação, espera-se contribuir para uma melhor compreensão de como as Organizações de Gestão de Destinos Portuguesas devem usar as aplicações de media sociais nas suas estratégias de comunicação por aplicação da proposta de modelo desenvolvida.

Architecture for real-time coordination of multiple autonomous mobile units

Interest on using teams of mobile robots has been growing, due to their potential to cooperate for diverse purposes, such as rescue, de-mining, surveillance or even games such as robotic soccer. These applications require a real-time middleware and wireless communication protocol that can support an efficient and timely fusion of the perception data from different robots as well as the development of coordinated behaviours. Coordinating several autonomous robots towards achieving a common goal is currently a topic of high interest, which can be found in many application domains. Despite these different application domains, the technical problem of building an infrastructure to support the integration of the distributed perception and subsequent coordinated action is similar. This problem becomes tougher with stronger system dynamics, e.g., when the robots move faster or interact with fast objects, leading to tighter real-time constraints. This thesis work addressed computing architectures and wireless communication protocols to support efficient information sharing and coordination strategies taking into account the real-time nature of robot activities. The thesis makes two main claims. Firstly, we claim that despite the use of a wireless communication protocol that includes arbitration mechanisms, the self-organization of the team communications in a dynamic round that also accounts for variable team membership, effectively reduces collisions within the team, independently of its current composition, significantly improving the quality of the communications. We will validate this claim in terms of packet losses and communication latency. We show how such self-organization of the communications can be achieved in an efficient way with the Reconfigurable and Adaptive TDMA protocol. Secondly, we claim that the development of distributed perception, cooperation and coordinated action for teams of mobile robots can be simplified by using a shared memory middleware that replicates in each cooperating robot all necessary remote data, the Real-Time Database (RTDB) middleware. These remote data copies, which are updated in the background by the selforganizing communications protocol, are extended with age information automatically computed by the middleware and are locally accessible through fast primitives. We validate our claim showing a parsimonious use of the communication medium, improved timing information with respect to the shared data and the simplicity of use and effectiveness of the proposed middleware shown in several use cases, reinforced with a reasonable impact in the Middle Size League of RoboCup.