Pathways of oxidative degradation of wine

The production of color/flavor compounds in wine is the result of different interrelated mechanism reactions. Among these, the oxidation phenomenon and the Maillard reaction stands out with particular relevance due to their large impact on the sensory quality of wines and consequently on the product shelflife. The aim of this thesis is to achieve a global vision of wine degradation mechanisms. The identification of mediators’ reactions involved in oxidative browning and aromatic degradation will be attempted based on different detectors. Two approaches are implemented in this work: a “non-target” approach by which relevant analytical tools will be used to merge the information of cyclic voltammetry and Diode-Array (DAD) detectors, allowing a broader overview of the system and the note of interesting compounds, and a “target” approach by which the identification and quantification of the different compounds related to the wine degradation process will be performed using different detectors (HPLC-UV/Vis, LC-MS, GC-MS, and FID). Two different patterns of degradation will be used in this study: wines generated by O2 and temperature perturbations, and synthetic solutions with relevant wine constituents for mechanisms validation. Results clearly demonstrate a “convolution” of chemical mechanisms. The presence of oxygen combined with temperature had a synergistic effect on the formation of several key odorant compounds.The results of this work could be translated to the wine-making and wine-storage environment from the modelling of the analysed compounds.

Extension of electrochemically active sites in SOFCs and SOECs

Solid oxide fuel (SOFCs) and electrolyzer (SOECs) cells have been promoted as promising technologies for the stabilization of fuel supply and usage in future green energy systems. SOFCs are devices that produce electricity by the oxidation of hydrogen or hydrocarbon fuels with high efficiency. Conversely, SOECs can offer the reverse reaction, where synthetic fuels can be generated by the input of renewable electricity. Due to this similar but inverse nature of SOFCs and SOECs, these devices have traditionally been constructed from comparable materials. Nonetheless, several limitations have hindered the entry of SOFCs and SOECs into the marketplace. One of the most debilitating is associated with chemical interreactions between cell components that can lead to poor longevities at high working temperatures and/or depleted electrochemcial performance. Normally such interreactions are countered by the introduction of thin, purely ionic conducting, buffer layers between the electrode and electrolyte interface. The objective of this thesis is to assess if possible improvements in electrode kinetics can also be obtained by modifying the transport properties of these buffer layers by the introduction of multivalent cations. The introduction of minor electronic conductivity in the surface of the electrolyte material has previously been shown to radically enhance the electrochemically active area for oxygen exchange, reducing polarization resistance losses. Hence, the current thesis aims to extend this knowledge to tailor a bi-functional buffer layer that can prevent chemical interreaction while also enhancing electrode kinetics.The thesis selects a typical scenario of an yttria stabilized zirconia electrolyte combined with a lanthanide containing oxygen electrode. Gadolinium, terbium and praseodymium doped cerium oxide materials have been investigated as potential buffer layers. The mixed ionic electronic conducting (MIEC) properties of the doped-cerium materials have been analyzed and collated. A detailed analysis is further presented of the impact of the buffer layers on the kinetics of the oxygen electrode in SOFC and SOEC devices. Special focus is made to assess for potential links between the transport properties of the buffer layer and subsequent electrode performance. The work also evaluates the electrochemical performance of different K2NiF4 structure cathodes deposited onto a peak performing Pr doped-cerium buffer layer, the influence of buffer layer thickness and the Pr content of the ceria buffer layer. It is shown that dramatic increases in electrode performance can be obtained by the introduction of MIEC buffer layers, where the best performances are shown to be offered by buffer layers of highest ambipolar conductivity. These buffer layers are also shown to continue to offer the bifunctional role to protect from unwanted chemical interactions at the electrode/electrolyte interface.

Oxidation and glycoxidation of phosphatidylserine and their effect in immune response : a lipidomic approach

Phosphatidylserine (PS) is a member of the class of phospholipids, and is distributed among all cells of mammalians, playing important roles in diverse biological processes, including blood clotting and apoptosis. When externalized, PS is a ligand that is recognized on apoptotic cells. It has been considered that before externalization PS is oxidized and oxPS enhance the recognition by macrophages receptors, however the knowledge about oxidation of PS is still limited. PS, like others phospholipids, has two fatty acyl chains and one polar head group, in this case is the amino acid serine. The modifications in PS structure can occur by oxidation of the unsaturated fatty acyl chains and by glycation of the polar head group, due to free amine group, thus increasing the susceptibility to oxidative events. The main goal of this work was to characterize and identify oxidized and glycoxidized PS, contributing to the knowledge of the biological role of oxidation products of PS, as well as of glycated PS, in immune and inflammatory processes. To achieve this goal, PS standards (1-palmitoyl-2-oleoyl-sn-glycero-3-phospho- L-serine (POPS), 1,2-dipalmitoyl-sn-glycero-3-phospho-L-serine (DPPS), 1- palmitoyl-2-linoleoyl-sn-glycero-3-phospho-L-serine (PLPS) and 1-palmitoyl-2- arachidonoyl-sn-glycero-3-phospho-L-serine (PAPS)) and glycated PS (PAPS and POPS) were induced to oxidize in model systems, using different oxidant reagents: HO• and 2,2'-azobis-2-methyl-propanimidamide dihydrochloride (AAPH) . The detailed structural characterization of the oxidative products was performed by ESI-MS and MS/MS coupled to separation techniques such as off line TLC-MS and on line LC-MS, in order to obtained better characterization of the larger number of PS and glycated PS oxidation products. The results obtained in this work allowed to identify several oxidation products of PS and glycated PS with modifications in unsaturated fatty acyl chain. Also, oxidation products formed due to structural changes in the serine polar head with formation of terminal acetamide, terminal hydroperoxyacetaldehyde.and terminal acetic acid (glycerophosphacetic acid, GPAA) were identified. The mass spectrometric specific fragmentation pathway of each type of oxidation product was determined using different mass spectrometry approaches. Based on the identified fragmentation pathways, targeted lipidomic analysis was performed to detect oxidation products modified in serine polar head in HaCaT cell line treated with AAPH. The GPAA was detected in HaCaT cells treated with AAPH to induce oxidative stress, thus confirming that modifications in PS polar head is possible to occur in biological systems. Furthermore, it was found that glycated PS species are more prone to oxidative modifications when compared with non glycated PS. During oxidation of glycated PS, besides the oxidation in acyl chains, new oxidation products due to oxidation of the glucose moiety were identified, including PS advanced glycation end products (PSAGES). To investigate if UVA oxidative stress exerted changes in the lipidome of melanoma cell lines, particularly in PS profile, a lipidomic analysis was performed. The lipid profile was obtained using HILIC-LC-MS and GC-MS analysis of the total lipid extracts obtained from human melanoma cell line (SKMEL- 28) after UVA irradiation at 0, 2 and 24 hours. The results did not showed significant differences in PS content. At molecular level, only PS (18:0:18:1) decreased at the moment of irradiation. The most significant changes in phospholipids content occurred in phosphatidylcholines (PC) and phosphatidylinositol (PI) classes, with an increase of mono-unsaturated fatty acid (MUFA), similarly as observed for the fatty acid analysis. Overall, these data indicate that the observed membrane lipid changes associated with lipogenesis after UVA exposure may be correlated with malignant transformations associated with cancer development and progression. Despite of UVA radiation is associated with oxidative damage, in this work was not possible observe oxidation phospholipids. The anti/pro-inflammatory properties of the oxidized PLPS (oxPLPS) versus non-oxidized PLPS were tested on LPS stimulated RAW 264.7 macrophages. The modulation of intracellular signaling pathways such as NF-kB and MAPK cascades by oxPLPS and PS was also examined in this study. The results obtained from evaluation of anti/pro-inflammatory properties showed that neither PLPS or oxPLPS species activated the macrophages. Moreover only oxidized PLS were found to significantly inhibit NO production and iNOS and il1β gene transcription induced by LPS. The analysis at molecular level showed that this was the result of the attenuation of LPS-induced c-Jun-N-terminal kinase (JNK) and p65 NF-kB nuclear translocation. Overall these data suggest that oxPLPS, but not native PLPS, mitigates pro-inflammatory signaling in macrophages, contributing to containment of inflammation during apoptotic cell engulfment. The results obtained in this work provides new information on the modifications of PS, facilitating the identification of oxidized species in complex samples, namely under physiopathologic conditions and also contributes to a better understanding of the role of oxPS and PS in the inflammatory response, in the apoptotic process and other biological functions.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

Impact of exercise training on cancer-induced cardiac dysfunction

Cachexia is a complex syndrome characterized by severe weight loss frequently observed in cancer patients and associated with poor prognosis. Cancer cachexia is also related to modifications in cardiac muscle structure and metabolism leading to cardiac dysfunction. In order to better understand the cardiac remodeling induced by bladder cancer and the impact of exercise training after diagnosis on its regulation, we used an animal model of bladder cancer induced by exposition to N-butyl-N-(4-hydroxybutyl)-nitrosamine (BBN) in the drinking water. Healthy animals and previously BBN exposed animals were submitted to a training program in a treadmill at a speed of 20m/min, 60 min/day, 5 days/week during 13 weeks. At the end of the protocol, animals exposed to BBN presented a significant decrease of body weight, in comparison with control groups, supporting the presence of cancer cachexia. Morphological analysis of the cardiac muscle sections revealed the presence of fibrosis and a significant decrease of cardiomyocyte’s cross-sectional area, suggesting the occurrence of cardiac dysfunction associated with bladder cancer. These modifications were accompanied by heart metabolic remodeling characterized by a decreased fatty acid oxidation given by diminished levels of ETFDH and of complex II subunit  from the respiratory chain. Exercise training promoted an increment of connexin 43, a protein involved in cardioprotection, and of c-kit, a protein present in cardiac stem cells. These results suggest an improved heart regenerative capacity induced by exercise training. In conclusion, endurance training seems an attractive non-pharmacological therapeutic option for the management of cardiac dysfunction in cancer cachexia.

Melhoria do processo de lavação das rolhas de cortiça

O presente trabalho, realizado na empresa Amorim & Irmãos, S.A. teve como principal objetivo a avaliação e otimização da lavação de rolhas de cortiça técnicas, designadas por Twin Top®, em termos do perfil de consumo de reagentes químicos e do desenvolvimento da sua brancura. Para tal foi desenvolvida uma metodologia de análise de brancura de rolhas Twin Top® que serviu de base para a determinação de uma gama de brancuras aceitável. Para além disto, efetuou-se a avaliação do processo de lavação atualmente praticado e apartir do qual se realizaram os ensaios de otimização a nível laboratorial e piloto. Foram aplicados diferentes métodos de análise tais como, UV-Vis, FTIR-ATR, RMN e brancura ISO. Tendo como base de análise os espetros de refletância difusa de espetroscopia de UV-Vis foi proposta uma metodologia de determinação da brancura de rolhas Twin Top® a 457nm, adoptando as condições da Norma ISO 3688, aplicada na indústria da pasta e papel. De seguida, aplicando o método anteriormente definido, analisaram-se 1000 rolhas Twin Top® de lavação branca. Sendo que os resultados demonstraram que para rolhas dentro de especificação a brancura ISO deve estar entre os 30 e 35%. Foram ainda analisadas rolhas de diferentes classes visuais e provenientes de várias máquinas de lavação da fábrica para determinar possíveis diferenças. Para proceder à avaliação da lavação existente analisaram-se as colas usadas na produção das rolhas, um grânulo de cortiça e a matéria seca do efluente de lavação por FTIR-ATR e RMN. Desta avaliação resultou a presença de compostos de cortiça e cola degradada no efluente de lavação. Determinou-se a concentração dos reagentes intervenientes no processo que se mostraram de acordo com as especificações indicadas pelos fornecedores. Para a otimização da lavação combinou-se o peróxido de hidrogénio e hidróxido de sódio em diferentes quantidades, concentrações e diferentes tempos de reação o que permitiu identificar a melhor alternativa à lavação convencional. Assim existem duas propostas que devem ser tidas em consideração: uma em que a lavação mantém a mesma sequência da convencional e em que se altera o local de adição dos reagentes, que deve ser o mais próxima e direta possível das rolhas, e a outra em que se reduz o tempo do processo em 29,3 min, que compreende apenas uma oxidação e em que a quantidade de reagentes aplicada corresponde à soma dos volumes de reagentes das três oxidações do processo convencional.

Coupling of magnetic, strain and electric polarization fields in the structure of multiferroic material

The comprehensive study on the coupling of magnetism, electrical polarization and the crystalline lattice with the off-stoichiometric effects in self-doped multiferroic hexagonal h-LuMnxO3±δ (0.92≤x≤1.12) ceramic oxides was carried out for the PhD work. There is a complex coupling of the three ferroic degrees. The cancelation of the magnetic moments of ions in the antiferromagnetic order, electric polarization with specific vortex/antivortex topology and lattice properties have pushed researchers to find out ways to disclose the underlying physics and chemistry of magneto-electric and magneto-elastic couplings of h-RMnO3 multiferroic materials. In this research work, self-doping of Lu-sites or Mn-sites of h-LuMnxO3±δ ceramics prepared via solid state route was done to pave a way for deeper understanding of the antiferromagnetic transition, the weak ferromagnetism often reported in the same crystalline lattices and the ferroelectric properties coupled to the imposed lattice changes. Accordingly to the aim of the PhD thesis, the objectives set for the sintering study in the first chapter on experimental results were two. First, study of sintering off-stoichiometric samples within conditions reported in the bibliography and also extracted from the phase diagrams of the LuMnxO3±δ, with a multiple firings ending with a last high temperature step at 1300ºC for 24 hours. Second, explore longer annealing times of up to 240 hours at the fixed temperature of 1300 ºC in a search for improving the properties of the solid solution under study. All series of LuMnxO3±δ ceramics for each annealing time were characterized to tentatively build a framework enabling comparison of measured properties with results of others available in literature. XRD and Rietveld refinement of data give the evolution the lattice parameters as a function to x. Shrinkage of the lattice parameters with increasing x values was observed, the stability limit of the solid solution being determined by analysis of lattice parameters. The evolution of grain size and presence of secondary phases have been investigated by means of TEM, SEM, EDS and EBSD techniques. The dependencies of grain growth and regression of secondary phases on composition x and time were further characterized. Magnetic susceptibility of samples and magnetic irreversibility were extensively examined in the present work. The dependency of magnetic susceptibility, Neel ordering transition and important magnetic parameters are determined and compared to observation in other multiferroics in the following chapter of the thesis. As a tool of high sensitivity to detect minor traces of the secondary phase hausmannite, magnetic measurements are suggested for cross-checking of phase diagrams. Difficulty of previous studies on interpreting the magnetic anomaly below 43 K in h-RMnO3 oxides was discussed and assigned to the Mn3O4 phase, with supported of the electron microscopy. Magneto-electric coupling where AFM ordering is coupled to dielectric polarization is investigated as a function of x and of sintering condition via frequency and temperature dependent complex dielectric constant measurements in the final chapter of the thesis. Within the limits of solid solubility, the crystalline lattice of off-stoichiometric ceramics was shown to preserve the magneto-electric coupling at TN. It represents the first research work on magneto-electric coupling modified by vacancy doping to author’s knowledge. Studied lattices would reveal distortions at the atomic scale imposed by local changes of x dependent on sintering conditions which were widely inspected by using TEM/STEM methods, complemented with EDS and EELS spectroscopy all together to provide comprehensive information on cross coupling of distortions, inhomogeneity and electronic structure assembled and discussed in a specific chapter. Internal interfaces inside crystalline grains were examined. Qualitative explanations of the measured magnetic and ferroelectric properties were established in relation to observed nanoscale features of h-LuMnxO3±δ ceramics. Ferroelectric domains and topological defects are displayed both in TEM and AFM/PFM images, the later technique being used to look at size, distribution and switching of ferroelectric domains influenced by vacancy doping at the micron scale bridging to complementary TEM studies on the atomic structure of ferroelectric domains. In support to experimental study, DFT simulations using Wien2K code have been carried out in order to interpret the results of EELS spectra of O K-edge and to obtain information on the cation hybridization to oxygen ions. The L3,2 edges of Mn is used to access the oxidation state of the Mn ions inside crystalline grains. In addition, rehybridization driven ferroelectricity is also evaluated by comparing the partial density of states of the orbitals of all ions of the samples, also the polarization was calculated and correlated to the off-stoichiometric effect.

Antioxidant and detoxify genes polymorphisms in colorectal cancer predisposition

Colorectal cancer (CRC) results from histologic and gene alterations can lead to a massive cellular proliferation. Most of the authors assume multifactorial causes to CRC genesis. Low physical activity, a fat diet poor in fibers and smoking habits seems to have an important role in CRC. However, there are also genetic causes associated with CRC risk. It has been described that oxidative stress levels could influence CRC development. Thus, cellular balance reactive species and defense enzymes involved in oxidative stress are crucial to maintain a good tissue function and avoid neoplasic process. Therefore, genome variations on these defense enzymes, such as MNSOD, SOD3, GSTP1, GSTT1 and GSTM1, could be important biomarkers to colorectal adenocarcinomas. We intend to determine frequencies distribution of most common polymorphisms involved on oxidative stress regulation (MNSOD, SOD3, GSTP1, GSTT1 and GSTM1) in patients with sporadic colorectal adenocarcinoma (SCA) and in healthy controls, evaluation their possible correlation with SCA risk. Samples common polymorphisms of antioxidant and detoxify genes (MNSOD T175C, SOD3 R213G, GSTP1 A105G, GSTP1 C114T, GSTT1del and GSTM1del) analysis was done by PCR-SSP techniques. In this study we found a higher prevalence of MNSOD 175CC (55% vs 2%; p<0.0001; OR: 58.5; CI 13.3 to 256.7), SOD3 213GG (31% vs 2%; p<0.0001; OR: 21.89; CI 4.93 to 97.29), GSTP1 105GG (46% vs 12%; p<0.0001; OR: 6.14; CI 2.85 to 13.26), GSTP1 114TT (38% vs 0%; p<0.0001; OR: Infinity) and GSTT1 null (75% vs 28%; p<0.0001; OR: 7.71; CI 3.83 to 15.56) mutated genotypes among SCA patients, while the normal genotypes were associated with SCA absence. Furthermore, we found GSTP1 114TT mutated genotype (52% vs 27%; p=0.003; OR: 2.88; CI: 1.41 to 5.89) and GSTT1 null genotype (87% vs 65%; p=0.003; OR: 3.66; CI 1.51 to 8.84) associated with colon samples. These findings suggest a positive association between most of common polymorphisms involved on oxidative stress regulation and SCA prevalence. Dysregulation of MNSOD, SOD3, GSTP1, GSTT1 and GSTM1 genes could be associated with an increase of ROS in colon and rectum tissue and p53 pathway deregulation, induced by oxidative stress on colonic and rectal cells. The present study also provides preliminary evidence that MNSOD 175C, SOD3 213G, GSTP1 105G, GSTP1 114T and GSTT1 null polymorphisms, may be involved in SCA risk and could be useful to clarify this multifactorial disorder.

Efeito do exercício físico associado à microcorrente abdominal na reabilitação cardiovascular em contexto domiciliário

Introdução: O aumento da gordura abdominal e o sedentarismo contribuem para o risco de doença cardiovascular. A utilização de corrente elétrica de baixa intensidade (microcorrente) na região abdominal, associado ao exercício físico, parece ser um método inovador no aumento da taxa lipolítica dos adipócitos abdominais. Objetivos: Analisar os efeitos da utilização da microcorrente associada a um programa de exercícios em indivíduos saudáveis e com doença arterial coronária na gordura abdominal, e ainda, analisar os efeitos de um programa de exercício físico específico realizado no domicílio em indivíduos com doença arterial coronária, na fase de manutenção da reabilitação cardiovascular, na capacidade cardiorrespiratória. Métodos: Foram conduzidos três estudos: Estudo 1, em indivíduos saudáveis, durante 5 semanas (n=42), distribuídos aleatoriamente por quatro grupos experimentais (realizavam microcorrente e exercício físico: grupo 1- frequência 25 a 10Hz, elétrodos transcutâneos, exercício físico após; grupo 2- frequência 25 a 50Hz, elétrodos trancutâneos, exercício físico após; grupo 3- frequência 25 a 10Hz, elétrodos percutâneos e exercício físico após; grupo 4- frequência 25 a 10Hz, elétrodos transcutâneos e exercício físico realizado em simultâneo) e placebo (realizavam apenas exercício físico), onde foram avaliadas medidas de gordura abdominal; Estudo 2, em indivíduos saudáveis, durante uma sessão de microcorrente e exercício físico (n=83), distribuídos aleatoriamente por grupo experimental (realizavam microcorrente e exercício físico) e grupo placebo (realizavam exercício físico), onde foram avaliadas a atividade lipolítica (níveis de glicerol) e a oxidação de ácidos gordos (estimada pelo VO2 e VCO2); Estudo 3, em indivíduos após um ano de evento de síndrome coronária aguda (n=44), distribuídos aleatoriamente em dois grupos experimentais (grupo 1- exercício físico no domicílio; grupo 2- microcorrente e exercício físico no domicílio) e um grupo controlo (cuidados habituais), durante 8 semanas, sendo avaliados a gordura abdominal, o colesterol, a capacidade cardiorrespiratória, os hábitos de atividade física e alimentares e a qualidade de vida. Resultados: No estudo 1, após 5 semanas de intervenção de microcorrente e exercício físico, verificou-se uma redução das medidas de gordura abdominal (p<0,05); No estudo 2 observou-se que uma sessão de microcorrente associada ao exercício físico aumentou a taxa lipolítica, através da medição de glicerol (p<0,05), sem alterações significativas na oxidação de ácidos gordos, durante o exercício. No estudo 3, após as 8 semanas de aplicação de microcorrente associada a um programa de exercícios específicos no domicílio ocorreu uma diminuição significativa na gordura subcutânea (p<0,05). O programa de exercício físico de reabilitação cardiovascular no domicílio, per se, aumentou a capacidade cardiorrespiratória, na fase de manutenção (p<0,05). Não se verificaram alterações do colesterol total, dos hábitos alimentares, da atividade física e da qualidade de vida entre os três grupos. Conclusão: A utilização da microcorrente associada ao exercício físico parece ser um meio coadjuvante ao programa de exercícios, na redução do tecido adiposo abdominal em indivíduos saudáveis e em indivíduos após 1 ano de enfarte agudo do miocárdio. O programa de Reabilitação Cardiovascular no domicílio, em fase de manutenção, demonstrou melhoria da capacidade cardiorrespiratória.

Síntese e estudo de polioxotungstatos do tipo Keggin com interesse catalítico

O objectivo principal deste trabalho foi estudar as propriedades e comportamento de polioxotungstatos (POM) do tipo Keggin com interesse em catálise oxidativa. Os estudos efectuados centraram-se no comportamento electroquímico dos aniões em meio não aquoso, na estabilidade das suas estruturas em diferentes meios, na sua capacidade de catalisar a oxidação de diferentes substratos orgânicos e na sua eficácia em oxidar, de forma selectiva, um modelo não fenólico da lenhina. Efectuou-se, igualmente, o estudo estrutural de diversos aniões pela técnica de EXAFS. Neste trabalho, prepararam-se e caracterizaram-se alguns dos sais de tetra-n-butilamónio (TBA) dos polioxotungstatos estudados: compostos de Keggin, TBAx[XW12O40], lacunares, TBAxHy[XW11O39], mono-substituídos, TBAxHy[XW11M(H2O)O39]·nH2O, com X= P e Si e M = CoII, NiII, ZnII, CuIl, RuIII, MnIII e FeIII e os compostos com mistura de átomos adenda TBAx[XW11VO40]·nH2O (X = P e Si). Seleccionou-se este conjunto de polioxotungstatos de forma a efectuar-se um estudo comparativo da influência da natureza do heteroátomo central (P e Si) e dos metais de transição M nas propriedades estudadas. O conjunto de sais de TBA dos silicotungstatos estudados mostraram ser isoestruturais, apresentando a mesma estrutura dos fosfotungstatos análogos. O comportamento electroquímico dos polioxotungstatos foi estudado em soluções de acetonitrilo por voltametria cíclica e electrólise a potencial controlado. Verificou-se a ocorrência de vários processos mono-electrónicos de oxi-redução, reversíveis ou quasi-reversíveis, associados aos átomos de WVI/V e a alguns dos metais de transição. Os metais em estado de oxidação +3 reduziram-se mais facilmente do que os átomos de WVI. O metal CuII apresentou um comportamento diferente dos outros metais de transição. Este metal, na estrutura do POM, reduziu-se a CuI, proporcionando a observação do anião [PW11CuIO39]6- pela primeira vez. A redução posterior do CuI conduziu à formação de Cu0, que se depositou na superfície do eléctrodo. A re-oxidação do cobre a CuII conduziu à reconstituição da estrutura do POM, nas condições estudadas. Constatou-se que a ocorrência de protões na fórmula molecular dos POMs influenciou o seu comportamento electroquímico. Para os compostos que apresentam protões, a redução dos átomos de tungsténio ocorreu a potenciais menos negativos do que para aqueles que não apresentam protões na sua fórmula. Para os primeiros observou-se a transferência global de um maior número de electrões no mesmo intervalo de potencial, originando soluções fortemente azuladas. Quando os catiões tetra-n-butilamónio foram substituídos por catiões de menor dimensão, como Li+ e Na+, ocorreu a formação de pares iónicos com os polianiões [PW12O40]3- e [SiW11VO40]5-, originando um aumento do potencial de redução. Não houve evidência da formação de pares iónicos com os catiões TBA+. Este foi o primeiro estudo sistemático do comportamento electroquímico dos aniões lacunares e mono-substituídos em meio não aquoso. Estudou-se a estrutura dos polioxotungstatos em sais de TBA e em soluções de acetonitrilo. A aplicação da técnica de EXAFS ao estudo deste tipo de compostos em solução foi realizada pela primeira vez. Pela análise estrutural nos sólidos verificou-se que, a natureza do metal de transição M e do átomo central X, na estrutura do POM, influenciam o tamanho dos vários octaedros que o constituem. Não se observaram diferenças significativas nas estruturas dos polianiões em solução. A estabilidade da estrutura dos polioxometalatos na presença de um excesso de H2O2, em soluções de acetonitrilo/H2O foi analisada por espectroscopia de absorção de EXAFS, RMN de 31P, IV e espectrofotometria de absorção no UV-Vis. De uma forma geral, os POMs em que o átomo central da estrutura é o Si apresentaram maior estabilidade do que os POMs correspondentes com átomo de P no centro. Em solução de acetonitrilo, na ausência de H2O2, todos os aniões mostraram ser estáveis durante vários dias. Em solução, na presença de H2O2 em excesso (H2O2/POM = 1300), o anião lacunar [PW11O39]7- não é estável, transformando-se no anião de Venturello, {PO4[W(O)(O2)2]4}3-, após a formação de [PW12O40]3-, como produto intermediário. Em relação aos aniões substituídos [PW11M(H2O)O39]p-, M = MnIII, RuIII, FeIII, CoII e ZnII, verificou-se o seguinte na presença de H2O2: os aniões com MnIII e CoII transformaram-se no anião de Keggin, [PW12O40]3-. Os aniões de RuIII e FeIII mantiveram as suas estruturas e o anião de ZnII decompôs-se em {HPO4[W(O)(O2)2]2}2- e fosfato. Para estes casos de não estabilidade estrutural, o processo de decomposição foi mais rápido na presença de maiores conteúdos de água. Pela análise de EXAFS, na presença de um menor excesso de H2O2 (H2O2/POM = 70) e apenas 8% de parte aquosa, verificou-se que os aniões substituídos por MnIII mantiveram a sua estrutura, embora o ligando H2O, coordenado ao Mn, tivesse sido substituído por um grupo oxo no polianião [SiW11Mn(H2O)O39]5-, e por um grupo peroxo no polianião [PW11Mn(H2O)O39]4-. O anião com RuIII, nestas condições, também mostrou substituir o seu ligando H2O por um grupo peroxo ou hidrogenoperoxo. Os polioxotungstatos mono-substituídos e lacunares mostraram ser catalisadores eficientes para a oxidação de cis-cicloocteno, geraniol e ciclooctano com H2O2. A maior novidade deste trabalho residiu na actividade catalítica apresentada pelos silicotungstatos estudados, contrariando o que é referido na literatura. Outro aspecto inovador foi o elevado valor de conversão obtido para a oxidação de ciclooctano. Este substrato foi oxidado com 74% de conversão, após 2h de reacção e com 80% de selectividade para o hidroperóxido de ciclooctilo, na presença do anião [PW11Fe(H2O)O39]4-. Os restantes produtos de reacção foram o ciclooctanol e a ciclooctanona. Os silicotungstatos apresentaram maior selectividade para o hidroperóxido de ciclooctilo do que os fosfotungstatos. O geraniol foi completamente oxidado após 3h de reacção, com 82% de selectividade para o 2,3-epoxigeraniol, na presença do anião [PW11Mn(H2O)O39]4-. O cis-cicloocteno foi oxidado ao seu epóxido, com 92% de conversão ao fim de 5h de reacção, na presença do anião lacunar [PW11O39]7-. O estudo da capacidade oxidativa do anião [SiW11VO40]5- foi analisada utilizando-se um modelo não fenólico da lenhina, a anisoína. Estudaram-se as condições favoráveis à obtenção de uma reacção selectiva para o anisilo, de forma a poder estudar-se a cinética da reacção. A estequiometria da reacção mostrou ser de 1:2 anisoína/POM. As ordens de reacção foram determinadas pelo método das velocidades iniciais e, a partir destes resultados, conheceu-se que o POM não estava envolvido no passo que limita a velocidade da reacção, sendo esta limitada pela transformação da anisoína. O estudo realizado sobre o efeito isotópico sugeriu que o passo que limitou a velocidade de reacção correspondeu à enolação da anisoína. Desta forma, observou-se pela primeira vez, que o POM oxida um modelo não fenólico da lenhina por via de enolação.