Development of lithium disilicate based glass-ceramics

O principal objectivo deste estudo foi o desenvolvimento de vitrocerâmicos à base de dissilicato de lítio no sistema Li2O-K2O-Al2O3-SiO2 contendo uma razão molar SiO2/Li2O muito afastada da do dissilicato de lítio (Li2Si2O5) usando composições simples e a técnica tradicional de fusão-vazamento de vidro de forma a obter materiais com propriedades mecânicas, térmicas, químicas e eléctricas superiores que permitam a utilização destes materiais em diversas aplicações funcionais. Investigou-se o fenómeno de separação de fases, a cristalização e as relações estrutura-propriedades de vidros nos sistemas Li2O-SiO2, Li2O-Al2O3-SiO2 e Li2O-K2O-Al2O3-SiO2. Os vidros nos sistemas Li2O-SiO2 e Li2O-Al2O3-SiO2 apresentaram fraca densificação e resultaram em materiais frágeis, contrastando com a boa sinterização dos vidros no sistema Li2O-K2O-Al2O3-SiO2. Pequenas adições de Al2O3 e K2O ao sistema Li2O-SiO2 permitiram controlar a separação de fases devido à formação de espécies de Al(IV) que confirmaram o papel de Al2O3 como formador de rede. Os compactos de pó de vidro das composições contendo Al2O3 e K2O tratados termicamente resultaram em vitrocerâmicos bem densificados, apresentando dissilicato de lítio como a principal fase cristalina, e valores de resistência mecânica à flexão, resistência química e condutividade eléctrica (173-224 MPa, 25-50 mg/cm2 e ~2´10-18 S/cm, respectivamente) que possibilitam a utilização destes materiais em diversas aplicações funcionais. A adição de P2O5, TiO2 e ZrO2 ao sistema Li2O-K2O-Al2O3-SiO2 como agentes nucleantes revelou que os vidros contendo apresentaram cristalização em volume, com a formação de metassilicato de lítio a temperaturas mais baixas e dissilicato de lítio para as temperaturas mais elevadas, enquanto a adição de zircónia reduz o grau de segregação, aumenta a polimerização da matriz vítrea e desloca o valor de Tg para temperaturas superiores, inibindo a cristalização.

Development of high-resolution gamma cameras based on silicon photosensors

The development of a compact gamma camera with high spatial resolution is of great interest in Nuclear Medicine as a means to increase the sensitivity of scintigraphy exams and thus allow the early detection of small tumours. Following the introduction of the wavelength-shifting fibre (WSF) gamma camera by Soares et al. and evolution of photodiodes into highly sensitive silicon photomultipliers (SiPMs), this thesis explores the development of a WSF gamma camera using SiPMs to obtain the position information of scintillation events in a continuous CsI(Na) crystal. The design is highly flexible, allowing the coverage of different areas and the development of compact cameras, with very small dead areas at the edges. After initial studies which confirmed the feasibility of applying SiPMs, a prototype with 5 5 cm2 was assembled and tested at room temperature, in an active field-of-view of 10 10 mm2. Calibration and characterisation of intrinsic properties of this prototype were done using 57Co, while extrinsic measurements were performed using a high-resolution parallel-hole collimator and 99mTc. In addition, a small mouse injected with a radiopharmaceutical was imaged with the developed prototype. Results confirm the great potential of SiPMs when applied in a WSF gamma camera, achieving spatial resolution performance superior to the traditional Anger camera. Furthermore, performance can be improved by an optimisation of experimental conditions, in order to minimise and control the undesirable effects of thermal noise and non-uniformity of response of multiple SiPMs. The development and partial characterisation of a larger SiPM WSF gamma camera with 10 10 cm2 for clinical application are also presented.

Potential health benefits of Artemisia gorgonum extracts

Relevância etnofarmacológica: Artemisia gorgonum (Asteraceae), conhecida como “losna ou lorna”, é usada em Cabo Verde na medicina tradicional para o tratamento de inflamações, febre e gastroenterites. Estudos recentes sugerem que artimetina, isolada a partir de Artemisa gorgonum, poderia ser usada para o tratamento da malária devido à sua atividade antiplasmodial. Objetivo do estudo: Avaliação in vitro da atividade anti-microbiana e sinergética dos extratos hidroetanol (70%) e metanol de A. gorgonum (EHAG e EMAG) em bactérias do trato urinário e uma espécie de fungo. A atividade antioxidante dos extratos de hidroetanol (70%), metanol, clorofórmio e clorofórmio-metanol (1:2), e o efeito protetor de EHAG contra lesões hepáticas em ratos induzidos com CCl4 também foram analisados. Material e métodos: A atividade antimicrobiana dos extratos de A. gorgonum foi testada in vitro contra sete estirpes de microrganismos, incluindo bactérias Gram-positivas, Gram-negativas e uma espécie de fungo. O método DAA (Decimal assay for additivity) foi determinado para atividade antibacteriana do EHAG contra Pseudomonas aeruginosa. O efeito antioxidante in vitro de vários extratos de A. gorgonum foi analisado pelo método DPPH. A lesão hepática foi induzida por injeção intrapeitoral do CCl4. Seguidamente, os ratos foram administrados oralmente com EHAG, diariamente, por um período de 7 dias. Resultados e Discussão: Foi observada atividade antibacteriana dos extratos de EHAG e EMAG contra todos os microrganismos usados neste estudo. O crescimento das estirpes de Escherichia coli e Pseudomonas aeruginosa foi o mais inibido por ambos os extratos, apresentando valores significativos, enquanto o crescimento das estirpes S. aureus e Klebsiella spp. foi o menos afetado. Candida albicans foi inibida fortemente pelo EMAG. As combinações de extrato hidroetanólico com antibióticos demonstraram atividade antibacteriana sinergética contra todos os patogénicos testados. Em contrapartida, a combinação de extrato metanólico com antibióticos permitiu observar efeitos antagónicos contra todas as bactérias, exceto Klebsiella spp. que apresentou atividade sinérgica. O EHAG e EMAG mostraram efeito significativo na eliminação do radical DPPH. A atividade hepatoprotetora foi observada em ratos previamente administrados com CCl4. Estes estudos evidenciam os potenciais benefícios de A. gorgonum.

Communication between nodes for autonomic and distributed management

Over the last decade, the most widespread approaches for traditional management were based on the Simple Network Management Protocol (SNMP) or Common Management Information Protocol (CMIP). However, they both have several problems in terms of scalability, due to their centralization characteristics. Although the distributed management approaches exhibit better performance in terms of scalability, they still underperform regarding communication costs, autonomy, extensibility, exibility, robustness, and cooperation between network nodes. The cooperation between network nodes normally requires excessive overheads for synchronization and dissemination of management information in the network. For emerging dynamic and large-scale networking environments, as envisioned in Next Generation Networks (NGNs), exponential growth in the number of network devices and mobile communications and application demands is expected. Thus, a high degree of management automation is an important requirement, along with new mechanisms that promote it optimally and e ciently, taking into account the need for high cooperation between the nodes. Current approaches for self and autonomic management allow the network administrator to manage large areas, performing fast reaction and e ciently facing unexpected problems. The management functionalities should be delegated to a self-organized plane operating within the network, that decrease the network complexity and the control information ow, as opposed to centralized or external servers. This Thesis aims to propose and develop a communication framework for distributed network management which integrates a set of mechanisms for initial communication, exchange of management information, network (re) organization and data dissemination, attempting to meet the autonomic and distributed management requirements posed by NGNs. The mechanisms are lightweight and portable, and they can operate in di erent hardware architectures and include all the requirements to maintain the basis for an e cient communication between nodes in order to ensure autonomic network management. Moreover, those mechanisms were explored in diverse network conditions and events, such as device and link errors, di erent tra c/network loads and requirements. The results obtained through simulation and real experimentation show that the proposed mechanisms provide a lower convergence time, smaller overhead impact in the network, faster dissemination of management information, increase stability and quality of the nodes associations, and enable the support for e cient data information delivery in comparison to the base mechanisms analyzed. Finally, all mechanisms for communication between nodes proposed in this Thesis, that support and distribute the management information and network control functionalities, were devised and developed to operate in completely decentralized scenarios.

Advanced energy efficient coordinated multi-point transmission for OFDMA

The ever-growing energy consumption in mobile networks stimulated by the expected growth in data tra ffic has provided the impetus for mobile operators to refocus network design, planning and deployment towards reducing the cost per bit, whilst at the same time providing a signifi cant step towards reducing their operational expenditure. As a step towards incorporating cost-eff ective mobile system, 3GPP LTE-Advanced has adopted the coordinated multi-point (CoMP) transmission technique due to its ability to mitigate and manage inter-cell interference (ICI). Using CoMP the cell average and cell edge throughput are boosted. However, there is room for reducing energy consumption further by exploiting the inherent exibility of dynamic resource allocation protocols. To this end packet scheduler plays the central role in determining the overall performance of the 3GPP longterm evolution (LTE) based on packet-switching operation and provide a potential research playground for optimizing energy consumption in future networks. In this thesis we investigate the baseline performance for down link CoMP using traditional scheduling approaches, and subsequently go beyond and propose novel energy e fficient scheduling (EES) strategies that can achieve power-e fficient transmission to the UEs whilst enabling both system energy effi ciency gain and fairness improvement. However, ICI can still be prominent when multiple nodes use common resources with di fferent power levels inside the cell, as in the so called heterogeneous networks (Het- Net) environment. HetNets are comprised of two or more tiers of cells. The rst, or higher tier, is a traditional deployment of cell sites, often referred to in this context as macrocells. The lower tiers are termed small cells, and can appear as microcell, picocells or femtocells. The HetNet has attracted signiffi cant interest by key manufacturers as one of the enablers for high speed data at low cost. Research until now has revealed several key hurdles that must be overcome before HetNets can achieve their full potential: bottlenecks in the backhaul must be alleviated, as well as their seamless interworking with CoMP. In this thesis we explore exactly the latter hurdle, and present innovative ideas on advancing CoMP to work in synergy with HetNet deployment, complemented by a novel resource allocation policy for HetNet tighter interference management. As system level simulator has been used to analyze the proposed algorithm/protocols, and results have concluded that up to 20% energy gain can be observed.

Multi-standard reconfigurable wireless transmitter architectures

The continuous demand for highly efficient wireless transmitter systems has triggered an increased interest in switching mode techniques to handle the required power amplification. The RF carrier amplitude-burst transmitter, i.e. a wireless transmitter chain where a phase-modulated carrier is modulated in amplitude in an on-off mode, according to some prescribed envelope-to-time conversion, such as pulse-width or sigma-delta modulation, constitutes a promising architecture capable of efficiently transmitting signals of highly demanding complex modulation schemes. However, the tested practical implementations present results that are way behind the theoretically advanced promises (perfect linearity and efficiency). My original contribution to knowledge presented in this thesis is the first thorough study and model of the power efficiency and linearity characteristics that can be actually achieved with this architecture. The analysis starts with a brief revision of the theoretical idealized behavior of these switched-mode amplifier systems, followed by the study of the many sources of impairments that appear when the real system is implemented. In particular, a special attention is paid to the dynamic load modulation caused by the often ignored interaction between the narrowband signal reconstruction filter and the usual single-ended switched-mode power amplifier, which, among many other performance impairments, forces a two transistor implementation. The performance of this architecture is clearly explained based on the presented theory, which is supported by simulations and corresponding measured results of a fully working implementation. The drawn conclusions allow the development of a set of design rules for future improvements, one of which is proposed and verified in this thesis. It suggests a significant modification to this traditional architecture, where now the phase modulated carrier is always on – and thus allowing a single transistor implementation – and the amplitude is impressed into the carrier phase according to a bi-phase code.

Obras para voz e piano de Frederico de Freitas: a vocalidade entre fado e canção

Durante a sua vida Frederico de Freitas abordou praticamente todos os géneros musicais, demonstrando uma imensa e notória versatilidade tanto na música erudita como na não erudita. O repertório para canto e piano representa uma parte substancial da sua obra vocal e, apesar de menos divulgado, não pode deixar de se considerar de grande importância. É precisamente neste género que mais se evidencia a versatilidade do seu estilo composicional. Este repertório abrange, assim, os géneros erudito e ligeiro, ou popular, pelo que as suas canções refletem a facilidade com que se movia de um meio para outro. Enquanto investigador, os estudos que realizou sobre música medieval portuguesa, o número elevadíssimo de recolhas de melodias tradicionais portuguesas que fez ao longo da vida e as investigações que realizou sobre o fado deram origem, paralelamente à composição de canções eruditas, a harmonizações de melodias medievais, a arranjos de temas na música tradicional e à composição de fados. Do ponto de vista interpretativo, a diversidade de estilos presentes nas canções de Frederico de Freitas exige do cantor lírico uma versatilidade e capacidade de se adaptar, ainda que mantendo a matiz da sua formação erudita, ao estilo próprio de cada canção. Com vista a uma interpretação estilística e vocalmente adequada, e por representarem um universo tão diferenciado, esta tese de doutoramento centra a sua atenção na problemática da vocalidade das suas canções.

Planeamento do território: metodologias, actores e participação

O argumento que compagina esta investigação sustenta que, no contexto actual de crescente complexidade dos problemas territoriais e de densidade de actores com interesses contraditórios e conflituantes, o desenvolvimento de metodologias de planeamento territorial promotoras da participação dos actores pode ser particularmente útil, possibilitando a construção de compromissos entre actores, alinhando as suas motivações e mobilizando os seus meios, gerando novas formas de “acção colectiva” em torno dos objectivos de planeamento. Procurou-se, assim: i) perceber o que é território, objecto da actividade do planeamento; ii) estabelecer um conceito de planeamento do território; iii) produzir um quadro de referência sobre planeamento territorial, com particular enfoque para o papel dos actores e participação e iv) desenvolver uma análise crítica de um conjunto de experiências de planeamento territorial, à luz do anterior quadro de referência. Do ponto de vista empírico, ambicionava-se examinar um conjunto de experiências de planeamento territorial onde a participação dos actores tivesse sido particularmente relevante, em diferentes contextos quanto ao entendimento dos objectivos de planeamento e sua concretização, com a particularidade de em ambas ter havido um forte envolvimento do investigador num duplo papel: investigador/cidadão e investigador/promotor do planeamento do território. Durante o trajecto de investigação percorrido, revisitaram-se as principais referências sobre a problemática do planeamento do território e suas metodologias, com enfoque particular nos actores e formas de participação. Assume-se a conceptualização do planeamento do território como uma actividade desenvolvida por um promotor público de planeamento (Estado), o qual, num determinado contexto e em defesa do interesse colectivo, define objectivos para um determinado objecto de planeamento (território, temática e escala). Para os cumprir, mobiliza os meios e actores necessários, produzindo um quadro de referência e identificando as acções, os palcos e os métodos para os alcançar. Identificaram-se seis famílias de metodologias de planeamento do território. Discutiu-se o conceito de actor em planeamento e propôs-se uma tipologia de actores, consoante meios, motivações e palcos. Em seguida, produziu-se uma conceptualização e tipologia de formas de participação dos actores, que vai para além da tradicional participação dos cidadãos. Concluiu-se com a sugestão de princípios de orientação metodológica para o planeamento territorial e participação dos actores. Os dados da análise empírica efectuada permitiram concluir que o papel dos diferentes actores e a forma como foram tidos em conta os seus meios disponíveis e as suas motivações foram determinantes nos resultados alcançados nos dois contextos analisados. Num conjunto de experiências, o envolvimento dos actores visou fortalecer o quadro social e institucional de apoio, o fomento à criação de plataformas de diálogo e colaboração, de valorização de diferentes formas de conhecimento (técnico-científico e “local”) e a mobilização para a construção de políticas ou para a validação do processo de decisão. Noutro conjunto de experiências, o entendimento da participação dos actores foi desvalorizado, produzido de forma burocrática, sem o devido reconhecimento das suas motivações e valorização dos meios disponíveis, sem um adequado envolvimento, o que conduziu a situações de elevada conflitualidade, fragilização e descredibilização do exercício de planeamento e a resultados que contrariam os objectivos inicialmente definidos. Neste contexto, parece pois confirmar-se a hipótese de que as metodologias de planeamento onde a participação dos actores é considerada de forma explícita, coerente e consequente, condicionam de forma clara o envolvimento e alinhamento dos actores e determinam os resultados do planeamento do território.

Percepção e valores das comunidades tradicionais no processo de desenvolvimento

Esta tese constitui uma reflexão sobre uma realidade, a praia do Francês, Alagoas, Brasil, que após mais de uma década é agora revisitada demonstrando os impactos socioambientais evidenciados ao longo de 30 anos, e por sua vez, fazem com que esta praia se transforme em laboratório cuja análise desenvolvida poderá servir como exemplo para ações futuras, e sustentáveis, em outras localidades. Sobretudo para áreas encontradas no mundo periférico, subdesenvolvido ou no Sul do Mundo, caracterizadas pela presença de populações tradicionais com seu rico e variado conhecimento, oralmente transmitido, adquirido através de suas observações práticas e cotidianas com seu meio circundante. Porém, este conhecimento encontra-se ameaçado pelo atual padrão de modernização, homogeneização do mundo, que em seu processo de desenvolvimento exclui crenças, valores e percepções de comunidades tradicionais inteiras, uma vez que se caracteriza por ocorrer com ausência de um olhar atento as especificidades locais, onde estas populações são as primeiras a sofrer com o atual modelo imposto que as ignora por completo e, ao mesmo tempo, por ocorrer com anuência do poder público local. Ao ignorá-las, tais ações minam suas formas de subsistência e via de consequência, às exclui das áreas onde sempre viveram e preservaram fazendo com que um importante e aprofundado conhecimento se perca, juntamente com a desintegração de seus laços de sociabilidade. A exemplo do Arquipélago dos Bijagós, Guiné-Bissau, costa Atlântica da África, lugar de existência de importante população tradicional que, a exemplo de outras localidades do mundo periférico, começa a experimentar transformações em seu patrimônio natural e cultural, decorrentes de ações desconectadas da realidade local. Este estudo, acena para uma importante reflexão sobre os impactos observados nesta realidade e os evidenciados na Praia do Francês. Portanto, procura-se aqui demonstrar a importância do conhecimento e das práticas existentes nas populações tradicionais (autóctones) para ações futuras, onde a inclusão deste saber seja prioridade para outras formas de pensar o desenvolvimento; e em seu processo de construção/planejamento este ocorra: com base no respeito à diversidade e com a participação dos mais diferentes e importantes atores. Enfim, um processo de desenvolvimento de base local, endógeno, sustentável.

Ferroelectric : CNTs structures fabrication for advanced functional nano devices

This work is about the combination of functional ferroelectric oxides with Multiwall Carbon Nanotubes for microelectronic applications, as for example potential 3 Dimensional (3D) Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Miniaturized electronics are ubiquitous now. The drive to downsize electronics has been spurred by needs of more performance into smaller packages at lower costs. But the trend of electronics miniaturization challenges board assembly materials, processes, and reliability. Semiconductor device and integrated circuit technology, coupled with its associated electronic packaging, forms the backbone of high-performance miniaturized electronic systems. However, as size decreases and functionalization increases in the modern electronics further size reduction is getting difficult; below a size limit the signal reliability and device performance deteriorate. Hence miniaturization of siliconbased electronics has limitations. On this background the Road Map for Semiconductor Industry (ITRS) suggests since 2011 alternative technologies, designated as More than Moore; being one of them based on carbon (carbon nanotubes (CNTs) and graphene) [1]. CNTs with their unique performance and three dimensionality at the nano-scale have been regarded as promising elements for miniaturized electronics [2]. CNTs are tubular in geometry and possess a unique set of properties, including ballistic electron transportation and a huge current caring capacity, which make them of great interest for future microelectronics [2]. Indeed CNTs might have a key role in the miniaturization of Non Volatile Ferroelectric Random Access Memories (NVFeRAM). Moving from a traditional two dimensional (2D) design (as is the case of thin films) to a 3D structure (based on a tridimensional arrangement of unidimensional structures) will result in the high reliability and sensing of the signals due to the large contribution from the bottom electrode. One way to achieve this 3D design is by using CNTs. Ferroelectrics (FE) are spontaneously polarized and can have high dielectric constants and interesting pyroelectric, piezoelectric, and electrooptic properties, being a key application of FE electronic memories. However, combining CNTs with FE functional oxides is challenging. It starts with materials compatibility, since crystallization temperature of FE and oxidation temperature of CNTs may overlap. In this case low temperature processing of FE is fundamental. Within this context in this work a systematic study on the fabrication of CNTs - FE structures using low cost low temperature methods was carried out. The FE under study are comprised of lead zirconate titanate (Pb1-xZrxTiO3, PZT), barium titanate (BaTiO3, BT) and bismuth ferrite (BiFeO3, BFO). The various aspects related to the fabrication, such as effect on thermal stability of MWCNTs, FE phase formation in presence of MWCNTs and interfaces between the CNTs/FE are addressed in this work. The ferroelectric response locally measured by Piezoresponse Force Microscopy (PFM) clearly evidenced that even at low processing temperatures FE on CNTs retain its ferroelectric nature. The work started by verifying the thermal decomposition behavior under different conditions of the multiwall CNTs (MWCNTs) used in this work. It was verified that purified MWCNTs are stable up to 420 ºC in air, as no weight loss occurs under non isothermal conditions, but morphology changes were observed for isothermal conditions at 400 ºC by Raman spectroscopy and Transmission Electron Microscopy (TEM). In oxygen-rich atmosphere MWCNTs started to oxidized at 200 ºC. However in argon-rich one and under a high heating rate MWCNTs remain stable up to 1300 ºC with a minimum sublimation. The activation energy for the decomposition of MWCNTs in air was calculated to lie between 80 and 108 kJ/mol. These results are relevant for the fabrication of MWCNTs – FE structures. Indeed we demonstrate that PZT can be deposited by sol gel at low temperatures on MWCNTs. And particularly interesting we prove that MWCNTs decrease the temperature and time for formation of PZT by ~100 ºC commensurate with a decrease in activation energy from 68±15 kJ/mol to 27±2 kJ/mol. As a consequence, monophasic PZT was obtained at 575 ºC for MWCNTs - PZT whereas for pure PZT traces of pyrochlore were still present at 650 ºC, where PZT phase formed due to homogeneous nucleation. The piezoelectric nature of MWCNTs - PZT synthesised at 500 ºC for 1 h was proved by PFM. In the continuation of this work we developed a low cost methodology of coating MWCNTs using a hybrid sol-gel / hydrothermal method. In this case the FE used as a proof of concept was BT. BT is a well-known lead free perovskite used in many microelectronic applications. However, synthesis by solid state reaction is typically performed around 1100 to 1300 ºC what jeopardizes the combination with MWCNTs. We also illustrate the ineffectiveness of conventional hydrothermal synthesis in this process due the formation of carbonates, namely BaCO3. The grown MWCNTs - BT structures are ferroelectric and exhibit an electromechanical response (15 pm/V). These results have broad implications since this strategy can also be extended to other compounds of materials with high crystallization temperatures. In addition the coverage of MWCNTs with FE can be optimized, in this case with non covalent functionalization of the tubes, namely with sodium dodecyl sulfate (SDS). MWCNTs were used as templates to grow, in this case single phase multiferroic BFO nanorods. This work shows that the use of nitric solvent results in severe damages of the MWCNTs layers that results in the early oxidation of the tubes during the annealing treatment. It was also observed that the use of nitric solvent results in the partial filling of MWCNTs with BFO due to the low surface tension (<119 mN/m) of the nitric solution. The opening of the caps and filling of the tubes occurs simultaneously during the refluxing step. Furthermore we verified that MWCNTs have a critical role in the fabrication of monophasic BFO; i.e. the oxidation of CNTs during the annealing process causes an oxygen deficient atmosphere that restrains the formation of Bi2O3 and monophasic BFO can be obtained. The morphology of the obtained BFO nano structures indicates that MWCNTs act as template to grow 1D structure of BFO. Magnetic measurements on these BFO nanostructures revealed a week ferromagnetic hysteresis loop with a coercive field of 956 Oe at 5 K. We also exploited the possible use of vertically-aligned multiwall carbon nanotubes (VA-MWCNTs) as bottom electrodes for microelectronics, for example for memory applications. As a proof of concept BiFeO3 (BFO) films were in-situ deposited on the surface of VA-MWCNTs by RF (Radio Frequency) magnetron sputtering. For in situ deposition temperature of 400 ºC and deposition time up to 2 h, BFO films cover the VA-MWCNTs and no damage occurs either in the film or MWCNTs. In spite of the macroscopic lossy polarization behaviour, the ferroelectric nature, domain structure and switching of these conformal BFO films was verified by PFM. A week ferromagnetic ordering loop was proved for BFO films on VA-MWCNTs having a coercive field of 700 Oe. Our systematic work is a significant step forward in the development of 3D memory cells; it clearly demonstrates that CNTs can be combined with FE oxides and can be used, for example, as the next 3D generation of FERAMs, not excluding however other different applications in microelectronics.

Describing vocal performance of Portuguese cantadeiras of Alto Minho

Portugal has strong musical traditions, which have been perpetrated by decades through folkloristic activities. In folk groups from Alto Minho (north of Portugal), folk singing is mostly performed by cantadeiras, amateur female solo singers who learn this style orally. Their vocal characteristics are distinctive when compared with other regions of the country; however, deep understanding of these vocal practices is still missing. The present work aims at studying Alto Minho cantadeira’s vocal performance in a multidimensional perspective, envisioning social, cultural and physiological understanding of this musical style. Thus, qualitative and quantitative data analyses were carried out, to: (i) describe current performance practices, (ii) explore existent perceptions about most relevant voice features in this region, (iii) investigate physiological and acoustic properties of this style, and (iv) compare this style of singing with other non-classical singing styles of other countries. Dataset gathered involved: 78 groups whose members were telephone interviewed, 13 directors who were asked to fill in a questionnaire on performance practices, 1 cantadeira in a pilot study, 16 cantadeiras in preliminary voice recordings, 77 folk group members in listening tests, and 10 cantadeiras in multichannel recordings, including audio, ELG, air flow and intra-oral pressure signals. Data were analysed through thematic content analysis, descriptive and inferential statistics, hierarchical principal components, and multivariate linear regression models. Most representative voices have a high pitched and loud voice, with a bright timbre, predominance of chest register without excessive effort, and good text intelligibility with regional accent. High representativeness levels were obtained by few cantadeiras; these sing with high levels of subglottal pressure and vocal fold contact quotient, predominance of high spectrum energy and vocal loudness, corroborating indications of prevalence of pressed phonation. These vocal characteristics resemble belting in musical theatre and share similarities with country (USA) and ojikanje (Croatia) singing. Strategies that may contribute to the preservation of this type of singing and the vocal health of current cantadeiras are discussed, pointing at the direction of continuous education among folk groups, following practices that are already adopted elsewhere in Europe.

Cross-readings and ecoliteracy in children's pop-up books

The purpose of this text is to analyse two recently been published pop-up books aimed at children, by Anouck Boisrobert e Louis Rigaud, Popville (2009) and Dans la forêt du paresseux [Wake up, Sloth!, En el bosque del perezoso] (first published in 2009 and 2012, accompanied with texts by Joy Sorman and Sophie Strady, respectively). These books were published originally in France by Hélium Editions, but they can now be found in several western countries and in many languages (Catalan, French, Dutch, English, German, Italian, Portuguese and Spanish, at least). The objective is to analyse their verbal text and their visual aspects produced by a sophisticated paper engineered to question how they achieve what seems to be one of their goals, the promotion of the readers' ecoliteracy (Orr, 1992) by his involvement in the reading process. This issue seems to be one of the main trends on children's literature in western societies nowadays, transcending the traditional and almost omnipresent role of scenario that nature plays in many children's narratives.