Challenges in mercury speciation and fractionation in soil and sediment

This investigation focused on the development, test and validation of methodologies for mercury fractionation and speciation in soil and sediment. After an exhaustive review of the literature, several methods were chosen and tested in well characterised soil and sediment samples. Sequential extraction procedures that divide mercury fractions according to their mobility and potential availability in the environment were investigated. The efficiency of different solvents for fractionation of mercury was evaluated, as well as the adequacy of different analytical instruments for quantification of mercury in the extracts. Kinetic experiments to establish the equilibrium time for mercury release from soil or sediment were also performed. It was found that in the studied areas, only a very small percentage of mercury is present as mobile species and that mobility is associated to higher aluminium and manganese contents, and that high contents of organic matter and sulfur result in mercury tightly bound to the matrix. Sandy soils tend to release mercury faster that clayey soils, and therefore, texture of soil or sediment has a strong influence on the mobility of mercury. It was also understood that analytical techniques for quantification of mercury need to be further developed, with lower quantification limits, particularly for mercury quantification of less concentrated fractions: water-soluble e exchangeable. Although the results provided a better understanding of the distribution of mercury in the sample, the complexity of the procedure limits its applicability and robustness. A proficiency-testing scheme targeting total mercury determination in soil, sediment, fish and human hair was organised in order to evaluate the consistency of results obtained by different laboratories, applying their routine methods to the same test samples. Additionally, single extractions by 1 mol L-1 ammonium acetate solution, 0.1 mol L-1 HCl and 0.1 mol L-1 CaCl2, as well as extraction of the organometallic fraction were proposed for soil; the last was also suggested for sediment and fish. This study was important to update the knowledge on analytical techniques that are being used for mercury quantification, the associated problems and sources of error, and to improve and standardize mercury extraction techniques, as well as to implement effective strategies for quality control in mercury determination. A different, “non chemical-like” method for mercury species identification was developed, optimised and validated, based on the thermo-desorption of the different mercury species. Compared to conventional extraction procedures, this method has advantages: it requires little to no sample treatment; a complete identification of species present is obtained in less than two hours; mercury losses are almost neglectable; can be considered “clean”, as no residues are produced; the worldwide comparison of results obtained is easier and reliable, an important step towards the validation of the method. Therefore, the main deliverables of this PhD thesis are an improved knowledge on analytical procedures for identification and quantification of mercury species in soils and sediments, as well as a better understanding of the factors controlling the behaviour of mercury in these matrices.

Design e avaliação de pictogramas farmacêuticos

A informação inerente aos medicamentos no processo de medicação e prescrição tem revelado insuficiências relativamente às necessidades do utilizador. Este projecto aborda essas dificuldades e procura contribuir, através do design e avaliação de pictogramas farmacêuticos, para um melhor acesso das pessoas à informação, oral e escrita, prestada por médicos, farmacêuticos e pela literatura inclusa dos medicamentos. Verificámos que, nos últimos 40 anos, se desenvolveram quase mil representações gráficas, provenientes de 20 países, sobre mensagens relativas a perigos, precauções e informações de como tomar o medicamento. Com base nesse conjunto mundial colectado, tão alargado e diversificado, procedeu-se à analise, agrupamento e comparação dessas representações com vista a apurar a diversidade gráfica e escrita das 75 mensagens farmacêuticas identificadas nesta investigação. Foi seguidamente consultada uma centena de profissionais de saúde dentro da área farmacêutica para selecção e definição da informação a ser projectada em pictogramas. Algumas das mensagens seleccionadas foram, por ordem de importância: “Não aplicar nos olhos”, “Não beber álcool enquanto estiver a tomar o medicamento” e “Guardar no frigorífico”. Foi concebido um sistema PictoPharma, bilingue (Português e Inglês), composto por 32 pictogramas farmacêuticos, com várias possibilidades cromáticas de acordo com as diversas aplicações para suportes de impressão e ecrã (Registo de Propriedade Industrial – marca e design). Embora o sistema projectado possa aumentar a capacidade de recordar as informações importantes pelas pessoas em geral, os públicos-alvo que mais beneficiarão com o sistema são: pessoas que apresentam especiais dificuldades de leitura - analfabetos, pessoas com nenhum conhecimento ou um conhecimento limitado da língua; pessoas com dificuldades para relembrar e / ou compreender o tratamento - população envelhecida, sob múltiplos tratamentos ou com menores capacidades intelectuais; pessoas que não falam a língua local ou são de uma cultura diferente - estrangeiros, turistas, imigrantes. Foram feitos testes de usabilidade com os públicos-alvo específicos, de forma a verificar a percentagem de compreensão dos pictogramas, sem a respectiva legenda e de acordo com as normas internacionais de normalização. Os resultados dos testes indicaram que metade do sistema atingiu os 100% de compreensão e a outra metade atingiu mais de 88%. O sistema PictoPharma criado caracteriza-se: pelo design gráfico no seu contraste visual e na possibilidade de leitura numa escala reduzida; pelo conceito de familiaridade gráfica representada no seu conjunto, de forma a tornar os pictogramas mais facilmente memorizáveis; pelo estudo feito para minimizar especificidades culturais visuais; pelas diversas aplicações possíveis na indústria; pelas direcções que aponta para futuras investigações sobre as escolhas visuais culturais inerentes a um projecto de design com este.

Modelling the Minho river plume intrusion into the rias baixas

The Minho River, situated 30 km south of the Rias Baixas is the most important freshwater source flowing into the Western Galician Coast (NW of the Iberian Peninsula). This discharge is important to determine the hydrological patterns adjacent to its mouth, particularly close to the Galician coastal region. The buoyancy generated by the Minho plume can flood the Rias Baixas for long periods, reversing the normal estuarine density gradients. Thus, it becomes important to analyse its dynamics as well as the thermohaline patterns of the areas affected by the freshwater spreading. Thus, the main aim of this work was to study the propagation of the Minho estuarine plume to the Rias Baixas, establishing the conditions in which this plume affects the circulation and hydrographic features of these coastal systems, through the development and application of the numerical model MOHID. For this purpose, the hydrographic features of the Rias Baixas mouths were studied. It was observed that at the northern mouths, due to their shallowness, the heat fluxes between the atmosphere and ocean are the major forcing, influencing the water temperature, while at the southern mouths the influence of the upwelling events and the Minho River discharge were more frequent. The salinity increases from south to north, revealing that the observed low values may be caused by the Minho River freshwater discharge. An assessment of wind data along the Galician coast was carried out, in order to evaluate the applicability of the study to the dispersal of the Minho estuarine plume. Firstly, a comparative analysis between winds obtained from land meteorological stations and offshore QuikSCAT satellite were performed. This comparison revealed that satellite data constitute a good approach to study wind induced coastal phenomena. However, since the numerical model MOHID requires wind data with high spatial and temporal resolution close to the coast, results of the forecasted model WRF were added to the previous study. The analyses revealed that the WRF model data is a consistent tool to obtain representative wind data near the coast, showing good results when comparing with in situ wind observations from oceanographic buoys. To study the influence of the Minho buoyant discharge influence on the Rias Baixas, a set of three one-way nested models was developed and implemented, using the numerical model MOHID. The first model domain is a barotropic model and includes the whole Iberian Peninsula coast. The second and third domains are baroclinic models, where the second domain is a coarse representation of the Rias Baixas and adjacent coastal area, while the third includes the same area with a higher resolution. A bi-dimensional model was also implemented in the Minho estuary, in order to quantify the flow (and its properties) that the estuary injects into the ocean. The chosen period for the Minho estuarine plume propagation validation was the spring of 1998, since a high Minho River discharge was reported, as well as favourable wind patterns to advect the estuarine plume towards the Rias Baixas, and there was field data available to compare with the model predictions. The obtained results show that the adopted nesting methodology was successful implemented. Model predictions reproduce accurately the hydrodynamics and thermohaline patterns on the Minho estuary and Rias Baixas. The importance of the Minho river discharge and the wind forcing in the event of May 1998 was also studied. The model results showed that a continuous moderate Minho River discharge combined with southerly winds is enough to reverse the Rias Baixas circulation pattern, reducing the importance of the occurrence of specific events of high runoff values. The conditions in which the estuarine plume Minho affects circulation and hydrography of the Rias Baixas were evaluated. The numerical results revealed that the Minho estuarine plume responds rapidly to wind variations and is also influenced by the bathymetry and morphology of the coastline. Without wind forcing, the plume expands offshore, creating a bulge in front of the river mouth. When the wind blows southwards, the main feature is the offshore extension of the plume. Otherwise, northward wind spreads the river plume towards the Rias Baixas. The plume is confined close to the coast, reaching the Rias Baixas after 1.5 days. However, for Minho River discharges higher than 800 m3 s-1, the Minho estuarine plume reverses the circulation patterns in the Rias Baixas. It was also observed that the wind stress and Minho River discharge are the most important factors influencing the size and shape of the Minho estuarine plume. Under the same conditions, the water exchange between Rias Baixas was analysed following the trajectories particles released close to the Minho River mouth. Over 5 days, under Minho River discharges higher than 2100 m3 s-1 combined with southerly winds of 6 m s-1, an intense water exchange between Rias was observed. However, only 20% of the particles found in Ria de Pontevedra come directly from the Minho River. In summary, the model application developed in this study contributed to the characterization and understanding of the influence of the Minho River on the Rias Baixas circulation and hydrography, highlighting that this methodology can be replicated to other coastal systems.

Receptores de aniões baseados em azacalix[4]arenos e isoftalamidas

Nesta tese, desenvolvida no âmbito do Programa Doutoral em Química da Universidade de Aveiro, foram desenvolvidos novos receptores sintéticos construídos a partir da plataforma macrocíclica tetraazacalix[2]areno[2]triazina ou do fragmento de isoftalamida. Ambas as unidades estruturais foram decora-das com grupos de reconhecimento molecular baseados em grupos amida e/ou ureia com o objectivo de actuarem como receptores selectivos de aniões com importância biológica ou farmacológica, incluindo acetato, oxalato, malo-nato, succinato, glutarato, diglicolato, L- e D-NHBoc-alanina, (S)- e (R)-fenilpro-panoato, (S,S)- e (R,R)-tartarato, fumarato, maleato, Cl-, HCO3-, H2PO4-, HSO4- e SO42-. No Capítulo 1 é efectuada uma revisão bibliográfica dos desenvolvimentos recentes na síntese, caracterização estrutural e aplicações de receptores fun-cionais relacionados com os desenvolvidos no âmbito desta tese, com especial incidência para aqueles que foram estudados como receptores de aniões. Neste domínio, enquanto que receptores derivados da isoftalamida têm sido bastante estudados ao longo das últimas décadas, o desenvolvimento de receptores de aniões inspirados em heteracalix[2]areno[2]triazinas ainda se encontra a dar os primeiros passos. No Capítulo 2 é apresentada a síntese de quatro novos macrociclos derivados de tetraazacalix[2]areno[2]triazina incorporando um ou dois braços de L-alanina (A1, A2) ou de L-leucina (L1, L2) nos anéis benzénicos, e derivados com grupos amida como unidades de reconhecimento. Adicionalmente, são também apresentados dois novos azacalix[2]areno[2]triazinas contendo um (U1) ou dois (U2) braços com grupos ureia substituídos com um grupo (S)-metilbenzílico. Foram ainda preparados os macrociclos A2Me4 e U2Me4 por metilação dos átomos de azoto em ponte de A2 e U2, os quais foram posterior-mente utilizados em estudos de associação. Os compostos sintetizados foram caracterizados através de técnicas espectroscópicas, complementadas por difracção de raios X de cristal único no caso de U2Me4. O Capítulo 3 contempla os estudos de reconhecimento molecular entre os macrociclos A2Me4 e U2Me4 e os aniões derivados de ácidos mono- e dicarbo-xílicos alifáticos, ácidos carboxílicos isoméricos (enantiómeros e isómeros geométricos), aminoácidos e polioxaniões acima referidos, excepto HCO3-. Os estudos de associação foram realizados através de técnicas de titulação por RMN 1H com determinação das respectivas constantes de afinidade. Todas as associações estudadas apresentaram uma estequiometria receptor-substrato 1:1 com excepção das associações formadas entre A2Me4 e U2Me4 com H2PO4- (1:2). Os complexos A2Me4∙SO42- e U2Me4∙(H2PO4-)2 são os mais estáveis com constantes de associação de 7,4 × 104 M-1 e superior a 105 M-2, respectivamente. O reconhecimento dos dicarboxilatos ocorreu através dos dois braços do macrociclo, com os aniões com grupos carboxilato separados por cadeias alifáticas mais compridas (glutarato e diglicolato) apresentando um melhor ajuste aos braços de A2Me4 e U2Me4. Não foi observado reconheci-mento enantiosselectivo de aniões. Em contraste, as constantes de afinidade para as associações com os aniões dos isómeros cis (maleato) e trans (fumarato) do ácido but-2-enodióico, de 89 e 4920 M-1 para A2Me4 e 481 e 4007 M-1 para U2Me4, respectivamente, sugerem selectividade de ambos os receptores para o fumarato. No Capítulo 4 é descrita a síntese de nove receptores acíclicos incorporando a unidade de isoftalamida (Iso-1 a Iso-9) e braços laterais com grupos de reconhecimento de aniões. Enquanto que o receptor Iso-1 possui como unida-des de reconhecimento apenas grupos amida, os receptores Iso-2, Iso-3, Iso-5, Iso-6, Iso-7 e Iso-9 possuem grupos amida e ureia, e os derivados Iso-4 e Iso-8 grupos amida e sulfonilureia. Em cada um destes compostos, os grupos de reconhecimento estão separados por uma cadeia etilénica cuja flexibilidade confere um melhor ajuste com os aniões. Os derivados de isoftalamida preparados foram caracterizados através de técnicas espectroscópicas. No Capítulo 5 são apresentados os estudos de associação realizados por técnicas de titulação por RMN 1H entre Iso-1, Iso-2, Iso-4, Iso-6 e Iso-8 com os aniões H2PO4-, HCO3-, Cl- e oxalato. Os receptores Iso-1, Iso-2 e Iso-6 apresentaram maior afinidade para o dianião, com valores de Kass de 6100, 7800 e 9800 M-1 respectivamente, e menor para Cl- (17 < Kass < 19 M-1). Foram sempre formadas associações mais estáveis com H2PO4- (294 < Kass < 427 M-1) comparativamente a HCO3-, sendo que a associação mais forte com este últi-mo foi determinada com Iso-2 (Kass = 95 M-1). As moléculas de Iso-4 e Iso-8 sofreram desprotonação dos grupos sulfonilureia na presença de todos os aniões excepto de Cl-. No Capítulo 6 apresentam-se as conclusões gerais e no Capítulo 7 descrevem-se os procedimentos experimentais e também os dados espectroscópicos dos produtos obtidos.

Photodynamic inactivation of bacteria by cationic porphyrins : their cellular targets and potential environmental applications

Photodynamic inactivation (PDI) is defined as the process of cell destruction by oxidative stress resulting from the interaction between light and a photosensitizer (PS), in the presence of molecular oxygen. PDI of bacteria has been extensively studied in recent years, proving to be a promising alternative to conventional antimicrobial agents for the treatment of superficial and localized infections. Moreover, the applicability of PDI goes far beyond the clinical field, as its potential use in water disinfection, using PS immobilized on solid supports, is currently under study. The aim of the first part of this work was to study the oxidative modifications in phospholipids, nucleic acids and proteins of Escherichia coli and Staphylococcus warneri, subjected to photodynamic treatment with cationic porphyrins. The aims of the second part of the work were to study the efficiency of PDI in aquaculture water and the influence of different physicalchemical parameters in this process, using the Gram-negative bioluminescent bacterium Vibrio fischeri, and to evaluate the possibility of recycling cationic PS immobilized on magnetic nanoparticles. To study the oxidative changes in membrane phospholipids, a lipidomic approach has been used, combining chromatographic techniques and mass spectrometry. The FOX2 assay was used to determine the concentration of lipid hydroperoxides generated after treatment. The oxidative modifications in the proteins were analyzed by one-dimensional polyacrylamide gel electrophoresis (SDS-PAGE). Changes in the intracellular nucleic acids were analyzed by agarose gel electrophoresis and the concentration of doublestranded DNA was determined by fluorimetry. The oxidative changes of bacterial PDI at the molecular level were analyzed by infrared spectroscopy. In laboratory tests, bacteria (108 CFU mL-1) were irradiated with white light (4.0 mW cm-2) after incubation with the PS (Tri-Py+-Me-PF or Tetra-Py+-Me) at concentrations of 0.5 and 5.0 μM for S. warneri and E. coli, respectively. Bacteria were irradiated with different light doses (up to 9.6 J cm-2 for S. warneri and up to 64.8 J cm-2 for E. coli) and the changes were evaluated throughout the irradiation time. In the study of phospholipids, only the porphyrin Tri-Py+-Me-PF and a light dose of 64.8 J cm-2 were tested. The efficiency of PDI in aquaculture has been evaluated in two different conditions: in buffer solution, varying temperature, pH, salinity and oxygen concentration, and in aquaculture water samples, to reproduce the conditions of PDI in situ. The kinetics of the process was determined in realtime during the experiments by measuring the bioluminescence of V. fischeri (107 CFU mL-1, corresponding to a level of bioluminescence of 105 relative light units). A concentration of 5.0 μM of Tri-Py+-Me-PF was used in the experiments with buffer solution, and 10 to 50 μM in the experiments with aquaculture water. Artificial white light (4.0 mW cm-2) and solar irradiation (40 mW cm-2) were used as light sources.

Cooperative positioning for heterogeneous wireless systems

Future emerging market trends head towards positioning based services placing a new perspective on the way we obtain and exploit positioning information. On one hand, innovations in information technology and wireless communication systems enabled the development of numerous location based applications such as vehicle navigation and tracking, sensor networks applications, home automation, asset management, security and context aware location services. On the other hand, wireless networks themselves may bene t from localization information to improve the performances of di erent network layers. Location based routing, synchronization, interference cancellation are prime examples of applications where location information can be useful. Typical positioning solutions rely on measurements and exploitation of distance dependent signal metrics, such as the received signal strength, time of arrival or angle of arrival. They are cheaper and easier to implement than the dedicated positioning systems based on ngerprinting, but at the cost of accuracy. Therefore intelligent localization algorithms and signal processing techniques have to be applied to mitigate the lack of accuracy in distance estimates. Cooperation between nodes is used in cases where conventional positioning techniques do not perform well due to lack of existing infrastructure, or obstructed indoor environment. The objective is to concentrate on hybrid architecture where some nodes have points of attachment to an infrastructure, and simultaneously are interconnected via short-range ad hoc links. The availability of more capable handsets enables more innovative scenarios that take advantage of multiple radio access networks as well as peer-to-peer links for positioning. Link selection is used to optimize the tradeo between the power consumption of participating nodes and the quality of target localization. The Geometric Dilution of Precision and the Cramer-Rao Lower Bound can be used as criteria for choosing the appropriate set of anchor nodes and corresponding measurements before attempting location estimation itself. This work analyzes the existing solutions for node selection in order to improve localization performance, and proposes a novel method based on utility functions. The proposed method is then extended to mobile and heterogeneous environments. Simulations have been carried out, as well as evaluation with real measurement data. In addition, some speci c cases have been considered, such as localization in ill-conditioned scenarios and the use of negative information. The proposed approaches have shown to enhance estimation accuracy, whilst signi cantly reducing complexity, power consumption and signalling overhead.

Advanced energy efficient coordinated multi-point transmission for OFDMA

The ever-growing energy consumption in mobile networks stimulated by the expected growth in data tra ffic has provided the impetus for mobile operators to refocus network design, planning and deployment towards reducing the cost per bit, whilst at the same time providing a signifi cant step towards reducing their operational expenditure. As a step towards incorporating cost-eff ective mobile system, 3GPP LTE-Advanced has adopted the coordinated multi-point (CoMP) transmission technique due to its ability to mitigate and manage inter-cell interference (ICI). Using CoMP the cell average and cell edge throughput are boosted. However, there is room for reducing energy consumption further by exploiting the inherent exibility of dynamic resource allocation protocols. To this end packet scheduler plays the central role in determining the overall performance of the 3GPP longterm evolution (LTE) based on packet-switching operation and provide a potential research playground for optimizing energy consumption in future networks. In this thesis we investigate the baseline performance for down link CoMP using traditional scheduling approaches, and subsequently go beyond and propose novel energy e fficient scheduling (EES) strategies that can achieve power-e fficient transmission to the UEs whilst enabling both system energy effi ciency gain and fairness improvement. However, ICI can still be prominent when multiple nodes use common resources with di fferent power levels inside the cell, as in the so called heterogeneous networks (Het- Net) environment. HetNets are comprised of two or more tiers of cells. The rst, or higher tier, is a traditional deployment of cell sites, often referred to in this context as macrocells. The lower tiers are termed small cells, and can appear as microcell, picocells or femtocells. The HetNet has attracted signiffi cant interest by key manufacturers as one of the enablers for high speed data at low cost. Research until now has revealed several key hurdles that must be overcome before HetNets can achieve their full potential: bottlenecks in the backhaul must be alleviated, as well as their seamless interworking with CoMP. In this thesis we explore exactly the latter hurdle, and present innovative ideas on advancing CoMP to work in synergy with HetNet deployment, complemented by a novel resource allocation policy for HetNet tighter interference management. As system level simulator has been used to analyze the proposed algorithm/protocols, and results have concluded that up to 20% energy gain can be observed.

Pregnancy and newborns disorders followed by urine metabolomics

Chapter 1 introduces the scope of the work by identifying the clinically relevant prenatal disorders and presently available diagnostic methods. The methodology followed in this work is presented, along with a brief account of the principles of the analytical and statistical tools employed. A thorough description of the state of the art of metabolomics in prenatal research concludes the chapter, highlighting the merit of this novel strategy to identify robust disease biomarkers. The scarce use of maternal and newborn urine in previous reports enlightens the relevance of this work. Chapter 2 presents a description of all the experimental details involved in the work performed, comprising sampling, sample collection and preparation issues, data acquisition protocols and data analysis procedures. The proton Nuclear Magnetic Resonance (NMR) characterization of maternal urine composition in healthy pregnancies is presented in Chapter 3. The urinary metabolic profile characteristic of each pregnancy trimester was defined and a 21-metabolite signature found descriptive of the metabolic adaptations occurring throughout pregnancy. 8 metabolites were found, for the first time to our knowledge, to vary in connection to pregnancy, while known metabolic effects were confirmed. This chapter includes a study of the effects of non-fasting (used in this work) as a possible confounder. Chapter 4 describes the metabolomic study of 2nd trimester maternal urine for the diagnosis of fetal disorders and prediction of later-developing complications. This was achieved by applying a novel variable selection method developed in the context of this work. It was found that fetal malformations (FM) (and, specifically those of the central nervous system, CNS) and chromosomal disorders (CD) (and, specifically, trisomy 21, T21) are accompanied by changes in energy, amino acids, lipids and nucleotides metabolic pathways, with CD causing a further deregulation in sugars metabolism, urea cycle and/or creatinine biosynthesis. Multivariate analysis models´ validation revealed classification rates (CR) of 84% for FM (87%, CNS) and 85% for CD (94%, T21). For later-diagnosed preterm delivery (PTD), preeclampsia (PE) and intrauterine growth restriction (IUGR), it is found that urinary NMR profiles have early predictive value, with CRs ranging from 84% for PTD (11-20 gestational weeks, g.w., prior to diagnosis), 94% for PE (18-24 g.w. pre-diagnosis) and 94% for IUGR (2-22 g.w. pre-diagnosis). This chapter includes results obtained for an ultraperformance liquid chromatography-mass spectrometry (UPLC-MS) study of pre-PTD samples and correlation with NMR data. One possible marker was detected, although its identification was not possible. Chapter 5 relates to the NMR metabolomic study of gestational diabetes mellitus (GDM), establishing a potentially predictive urinary metabolic profile for GDM, 2-21 g.w. prior to diagnosis (CR 83%). Furthermore, the NMR spectrum was shown to carry information on individual phenotypes, able to predict future insulin treatment requirement (CR 94%). Chapter 6 describes results that demonstrate the impact of delivery mode (CR 88%) and gender (CR 76%) on newborn urinary profile. It was also found that newborn prematurity, respiratory depression, large for gestational age growth and malformations induce relevant metabolic perturbations (CR 82-92%), as well as maternal conditions, namely GDM (CR 82%) and maternal psychiatric disorders (CR 91%). Finally, the main conclusions of this thesis are presented in Chapter 7, highlighting the value of maternal or newborn urine metabolomics for pregnancy monitoring and disease prediction, towards the development of new early and non-invasive diagnostic methods.

Ritmos biológicos, cronotipo e funções cognitivas : um estudo de campo

Os primeiros estudos onde se tentava avaliar os melhores horários para se lecionar de forma a se poderem otimizar os horários escolares são já muito antigos. O primeiro a estabelecer uma relação sistemática entre performance cognitiva, Cronobiologia e sono foi Kleitman, evidenciando uma paralelismo entre o ritmo circadiano da temperatura central e a altura do dia em que eram realizadas tarefas simples de repetição. Após este primeiro estudo, muitos outros se seguiram, contudo a maioria apenas encontrou ritmos em protocolos de rotina constante e dessincronização forçada desprovidos de validade ecológica. Acresce ainda o facto de neste tipo de estudos não haver uma manipulação sistemática do efeito do padrão individual de distribuição dos parâmetros circadianos no nictómero, designado na literatura como Cronotipo. Perante isto, o presente estudo pretende avaliar a influência do Cronotipo nos ritmos cognitivos, utilizando um protocolo de rotina normal (Ecológico), onde também se manipula o efeito fim-de-semana. Para testar as premissas supramencionadas, utilizou-se uma amostra de 16 alunos universitários, que numa primeira fase responderam ao questionário de Matutinidade e Vespertinidade de Horne&Östberg, para caracterização do Cronotipo, e posteriormente andaram 15-17 dias consecutivos com tempatilumis (actímetros) para análise de ritmos de temperatura e atividade, com iPads onde realizavam ao longo do dia várias tarefas cognitivas e com o Manual de Registo Diário, onde respondiam ao diário de sono e de atividade. A análise de dados denotou a inexistência de expressão de ritmos na maioria dos parâmetros cognitivos inviabilizando a verificação de diferenças significativas entre indivíduos matutinos e vespertinos nestes parâmetros. Esta ausência de visualização da expressão rítmica pode ser explicada pelo facto de os participantes não terem aderido da forma desejada e exigida, à realização das tarefas cognitivas, ou pelo facto de termos usado um protocolo de rotina normal, em detrimento dos protocolos de rotina constate e dessincronização forçada, não controlando assim algumas variáveis que influenciam o desempenho cognitivo, podendo estas mascarar ou mesmo eliminar o ritmo. Ainda assim e apesar destas contingências observaram-se ritmos circadianos nas variáveis de autoavaliação, mesmo com o paradigma ecológico. Verificou-se ainda um efeito da hora do dia em vários parâmetros de tarefas cognitivas e motoras medidas objetivamente, assim como uma diminuição da performance cognitiva nos vespertinos, comparativamente aos matutinos, na janela temporal das 6h às 12 horas, que coincide com a maior concentração de horas de aulas por dia na Universidade onde o estudo foi realizado. Outros estudos serão necessários para consolidar a influência do Cronotipo nos ritmos cognitivos, utilizando o protocolo de rotina normal para garantir a validade ecológica, salvaguardando uma participação mais ativa na execução das tarefas cognitivas por parte dos sujeitos em estudo.

Famílias envelhecidas: percursos e diversidade

O conhecimento sobre famílias envelhecidas é ainda escasso. Neste âmbito, a pesquisa tem incidido nos cuidados familiares a idosos dependentes, focando os problemas de saúde, dependência funcional e declínio cognitivo. Esta investigação pretende contribuir para aprofundar o conhecimento sobre as famílias envelhecidas, assumindo uma perspetiva normativa e desenvolvimental, e contemplando a diversidade de contextos de vida e envelhecimento. O capítulo 1 centra casais compostos por pessoas idosas, e tem por objetivos: caracterizar a estrutura, dinâmica e valores do agregado familiar dos casais idosos; evidenciar valores e dinâmica relacional dos casais idosos. A amostra compreende 136 participantes, a quem foi administrado um questionário sobre a fase última do ciclo de vida familiar (Cerveny,1997). A análise de dados efetuou-se com recurso ao programa de análise de dados estatística SPSS 17.1. Os resultados indicam que os casais vivem predominantemente em casal, com uma dinâmica relacional do agregado caracterizada pelo respeito, diálogo e carinho; dinâmica relacional do casal caracterizada por clima afetuoso, amizade e diálogo, e valores assentes no amor, diálogo e convívio familiar. A dinâmica relacional do casal é pautada por atividades de lazer realizadas em conjunto e vida sexual tão boa como antes; os valores dão ao casamento significados de realização pessoal e perpetuação através dos filhos na juventude, e adaptação e descoberta na velhice. O capítulo 2 foca a construção da integridade familiar considerando a diversidade de contextos socioeconómicos (pessoas idosas que viveram em contexto de pobreza ao longo da vida), socioculturais (ex-emigrantes portugueses) e novas formas de famílias (homens homossexuais). Foi aplicada uma entrevista semiestruturada (King & Wynne, 2004) a uma amostra de 12, 20 e 10 pessoas, respetivamente. A análise de dados foi efetuada com base na análise de conteúdo com recurso a juízes independentes baseada na grounded theory, contudo no caso do contexto socioeconómico recorreu-se ao programa de análise de dados qualitativa N-Vivo 7. Os resultados sugerem que a diversidade de contextos analisada coloca desafios à rutura familiar o que pode potenciar o caminho da desconexão e alienação. Contudo, o contexto das significações exerce um papel fundamental na construção da integridade familiar. A redefinição da identidade associada a uma filosofia de vida que enfatize as forças em vez dos fracassos parece determinar a construção da integridade familiar, contudo existem especificidades. Relativamente ao contexto socioeconómico: as pessoas idosas no caminho da integridade revelam um sentido de autovalorização (ter vivido uma vida significativa) apesar da pobreza; as pessoas idosas no caminho da desconexão/alienação alimentam sentimentos de insignificância devido à escassez de recursos económicos. Ainda neste contexto, os valores (princípios de conduta) reinterpretam a identidade ao longo da vida e permitem compreender que a integridade familiar ocorre quando ser pobre é encarado pelas conquistas; a desconexão/alienação emerge quando ser pobre incorpora sentimentos de desvalorização e inferioridade. No contexto sociocultural, as pessoas idosas ex-emigrantes cujo processo de emigração se desenvolveu em família (a família está envolvida no processo de emigração e funciona como um pilar desde a fase de decisão até ao regresso) desenvolveram uma filosofia de vida assente numa atitude ativa e solidária e estão em integridade familiar; as pessoas em desconexão relatam episódios de conflito familiar que marcam a trajetória de emigração, e uma atitude passiva na resolução desses conflitos até à atualidade; as pessoas em alienação familiar, cujo processo de emigração se desenrolou de forma solitária, desenvolvem uma filosofia de vida assente na luta solitária: a sua força e identidade estão em enfrentar tudo sem precisar de ninguém. Relativamente às novas formas de família, a integridade familiar evolui desde a revelação da homossexualidade (em idade jovem) e conclui-se na velhice quando a homossexualidade se torna um legado. A desconexão parece evoluir da luta constante da falha da aceitação da homossexualidade pela família e outras pessoas significativas. O capítulo 3 analisa as trajetórias de vida de homens homossexuais atualmente idosos, para compreender melhor a influência da homossexualidade e os principais eventos. Adotou-se a técnica da linha de acontecimentos de vida (Acquaviva et al., 2007), aplicada a 10 participantes com 60 anos ou mais. Os resultados sugerem que vários eventos de vida influenciam o curso de vida: i) o autoconhecimento da homossexualidade; ii) tentar passar por heterossexual; iii) assumir a homossexualidade (explicita ou implicitamente); iv) sentir limitações e desafios relacionados com o ser idoso e homossexual. O capítulo 4 procurou alargar a perspetiva do envelhecimento considerando uma abordagem transcultural. Assim, realizou-se um estudo numa comunidade indígena (Guarani Mbya, Brasil). Neste estudo analisase o modo de viver e ser idoso nessa comunidade. A amostra compreende 6 participantes a quem foi administrada uma entrevista aberta. Este estudo contemplou ainda a observação com registo etnográfico e realização de um diário de bordo. A análise de conteúdo efetuou-se com apoio do software de dados qualitativa WebQDA 1.4.3. Os resultados sugerem o papel das pessoas idosas na preservação de uma cultura ágrafa, garantindo que as tradições estejam presentes nas gerações atuais através da oralidade. A adoção de lentes normativas no estudo e compreensão das famílias envelhecidas permite compreender as tarefas desenvolvimentais e normativas no fim da vida.

Wind energy resource modelling in Portugal and its future large-scale alteration due to anthropogenic induced climate changes

The high dependence of Portugal from foreign energy sources (mainly fossil fuels), together with the international commitments assumed by Portugal and the national strategy in terms of energy policy, as well as resources sustainability and climate change issues, inevitably force Portugal to invest in its energetic self-sufficiency. The 20/20/20 Strategy defined by the European Union defines that in 2020 60% of the total electricity consumption must come from renewable energy sources. Wind energy is currently a major source of electricity generation in Portugal, producing about 23% of the national total electricity consumption in 2013. The National Energy Strategy 2020 (ENE2020), which aims to ensure the national compliance of the European Strategy 20/20/20, states that about half of this 60% target will be provided by wind energy. This work aims to implement and optimise a numerical weather prediction model in the simulation and modelling of the wind energy resource in Portugal, both in offshore and onshore areas. The numerical model optimisation consisted in the determination of which initial and boundary conditions and planetary boundary layer physical parameterizations options provide wind power flux (or energy density), wind speed and direction simulations closest to in situ measured wind data. Specifically for offshore areas, it is also intended to evaluate if the numerical model, once optimised, is able to produce power flux, wind speed and direction simulations more consistent with in situ measured data than wind measurements collected by satellites. This work also aims to study and analyse possible impacts that anthropogenic climate changes may have on the future wind energetic resource in Europe. The results show that the ECMWF reanalysis ERA-Interim are those that, among all the forcing databases currently available to drive numerical weather prediction models, allow wind power flux, wind speed and direction simulations more consistent with in situ wind measurements. It was also found that the Pleim-Xiu and ACM2 planetary boundary layer parameterizations are the ones that showed the best performance in terms of wind power flux, wind speed and direction simulations. This model optimisation allowed a significant reduction of the wind power flux, wind speed and direction simulations errors and, specifically for offshore areas, wind power flux, wind speed and direction simulations more consistent with in situ wind measurements than data obtained from satellites, which is a very valuable and interesting achievement. This work also revealed that future anthropogenic climate changes can negatively impact future European wind energy resource, due to tendencies towards a reduction in future wind speeds especially by the end of the current century and under stronger radiative forcing conditions.

The impact of biofuels for road traffic on air quality : a modelling approach

The selection of the energy source to power the transport sector is one of the main current concerns, not only relative with the energy paradigm but also due to the strong influence of road traffic in urban areas, which highly affects human exposure to air pollutants and human health and quality of life. Due to current important technical limitations of advanced energy sources for transportation purposes, biofuels are seen as an alternative way to power the world’s motor vehicles in a near-future, helping to reduce GHG emissions while at the same time stimulating rural development. Motivated by European strategies, Portugal, has been betting on biofuels to meet the Directive 2009/28/CE goals for road transports using biofuels, especially biodiesel, even though, there is unawareness regarding its impacts on air quality. In this sense, this work intends to clarify this issue by trying to answer the following question: can biodiesel use contribute to a better air quality over Portugal, particularly over urban areas? The first step of this work consisted on the characterization of the national biodiesel supply chain, which allows verifying that the biodiesel chain has problems of sustainability as it depends on raw materials importation, therefore not contributing to reduce the external energy dependence. Next, atmospheric pollutant emissions and air quality impacts associated to the biodiesel use on road transports were assessed, over Portugal and in particular over the Porto urban area, making use of the WRF-EURAD mesoscale numerical modelling system. For that, two emission scenarios were defined: a reference situation without biodiesel use and a scenario reflecting the use of a B20 fuel. Through the comparison of both scenarios, it was verified that the use of B20 fuels helps in controlling air pollution, promoting reductions on PM10, PM2.5, CO and total NMVOC concentrations. It was also verified that NO2 concentrations decrease over the mainland Portugal, but increase in the Porto urban area, as well as formaldehyde, acetaldehyde and acrolein emissions in the both case studies. However, the use of pure diesel is more injurious for human health due to its dominant VOC which have higher chronic hazard quotients and hazard indices when compared to B20.

Development of a single photon counting computed tomography system using MPGDs

The development of computed tomography systems with energy resolving detectors is a current challenge in medical physics and biomedical engineering. A computed tomography system of this kind allows getting complementary informations relatively to conventional systems, that can help the medical diagnosis, being of great interest in medicine. The work described in this thesis is related to the development of a computed tomography system using micropattern gaseous detectors, which allow storing, simultaneously, information about the interaction position and the energy of each single photon that interacts with the detector. This kind of detectors has other advantages concerning the cost and characteristics of operation when compared with solid state detectors. Tomographic acquisitions were performed using a MicroHole & Strip Plate based detector, which allowed reconstructing cross-sectional images using energy windows, applying the energy weighting technique and performing multi-slice and tri-dimensional reconstructions. The contrast-to-noise ratio was improved by 31% by applying the energy weighting technique, comparing with the corresponding image obtained with the current medical systems. A prototype of a computed tomography with flexibility to change the detector was developed, making it possible to apply different detectors based on Thick-COBRA. Several images acquired with these detectors are presented and demonstrate their applicability in X-ray imaging. When operating in NeCH4, the detector allowed a charge gain of 8 104, an energy resolution of 20% (full width at half maximum at 8 keV), a count rate of 1 106 Hz/mm2, a very stable operation (gain fluctuations below 5%) and a spacial resolution of 1.2 mm for an energy photon of 3.6 keV. Operating the detector in pure Kr allowed increasing the detection efficiency and achieving a charge gain of 2 104, an energy resolution of 32% (full width at half maximum at 22 keV), a count rate of 1 105 Hz/mm2, very stable operation and a spatial resolution of 500 m. The software already existing in the group was improved and tools to correct geometric misalignments of the system were also developed. The reconstructions obtained after geometrical correction are free of artefacts due to the referred misalignments.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.