Individual and couple decision behavior under risk: evidence on the dynamics of power balance

This article reports results of an experiment designed to analyze the link between risky decisions made by couples and risky decisions made separately by each spouse. We estimate both the spouses and the couples' degrees of risk aversion, we assess how the risk preferences of the two spouses aggregate when they make risky decisions, and we shed light on the dynamics of the decision process that takes place when couples make risky decisions. We find that, far from being fixed, the balance of power within the household is malleable. In most couples, men have, initially, more decision-making power than women but women who ultimately implement the joint decisions gain more and more power over the course of decision making.

A self-learning teaching-learning based optimization for dynamic economic/environmental dispatch considering multiple plug-in electric vehicle loads

Economic and environmental load dispatch aims to determine the amount of electricity generated from power plants to meet load demand while minimizing fossil fuel costs and air pollution emissions subject to operational and licensing requirements. These two scheduling problems are commonly formulated with non-smooth cost functions respectively considering various effects and constraints, such as the valve point effect, power balance and ramp rate limits. The expected increase in plug-in electric vehicles is likely to see a significant impact on the power system due to high charging power consumption and significant uncertainty in charging times. In this paper, multiple electric vehicle charging profiles are comparatively integrated into a 24-hour load demand in an economic and environment dispatch model. Self-learning teaching-learning based optimization (TLBO) is employed to solve the non-convex non-linear dispatch problems. Numerical results on well-known benchmark functions, as well as test systems with different scales of generation units show the significance of the new scheduling method.

Atomic data for modelling fusion and astrophysical plasmas

Trends and focii of interest in atomic modelling and data are identified in connection with recent observations and experiments in fusion and astrophysics. In the fusion domain, spectral observations are included of core, beam penetrated and divertor plasma. The helium beam experiments at JET and the studies with very heavy species at ASDEX and JET are noted. In the astrophysics domain, illustrations are given from the SOHO and CHANDRA spacecraft which span from the solar upper atmosphere, through soft x-rays from comets to supernovae remnants. It is shown that non-Maxwellian, dynamic and possibly optically thick regimes must be considered. The generalized collisional-radiative model properly describes the collisional regime of most astrophysical and laboratory fusion plasmas and yields self-consistent derived data for spectral emission, power balance and ionization state studies. The tuning of this method to routine analysis of the spectral observations is described. A forward look is taken as to how such atomic modelling, and the atomic data which underpin it, ought to evolve to deal with the extended conditions and novel environments of the illustrations. It is noted that atomic physics influences most aspects of fusion and astrophysical plasma behaviour but the effectiveness of analysis depends on the quality of the bi-directional pathway from fundamental data production through atomic/plasma model development to the confrontation with experiment. The principal atomic data capability at JET, and other fusion and astrophysical laboratories, is supplied via the Atomic Data and Analysis Structure (ADAS) Project. The close ties between the various experiments and ADAS have helped in this path of communication.

The making of professionals: Embedded civil society development in a transition country

The paper addresses the development of non-governmental organisations (NGOs) in transition settings. Caught in the balance of knowledge exchange and translation of ideas from abroad, organisations in turbulent setting legitimise their existence by learning through professional networks. By association, organisational actors gain acknowledgement by their sector by traversing the corridors of influence provided by international partnerships. What they learn is how to conduct themselves as agents of change in society, and how to deliver on stated missions and goals, therefore, legitimising their presence in a budding civil society at home. The paper presents a knowledge production and learning practices framework which indicates a presence of dual identity of NGOs - their “embeddedness” locally and internationally. Selected framework dimensions and qualitative case study themes are discussed with respect to the level of independence of organisational actors in the East from their partners in the West in a post-socialist context. A professional global civil society as organisations are increasingly managed in similar, professional ways (Anheier & Themudo 2002). Here knowledge “handling” and knowledge “translation” take place through partnership exchanges fostering capable and/or competitive change-inducing institutions (Czarniawska & Sevon 2005; Hwang & Suarez 2005). How professional identity presents itself in the third sector, as well as the sector’s claim to expertise, need further attention, adding to ongoing discussions on professions in institutional theory (Hwang & Powell 2005; Scott 2008; Noordegraaf 2011). A conceptual framework on the dynamic involved for the construction professional fields follows: • Multiple case analysis provides a taxonomy for understanding what is happening in knowledge transition, adaptation, and organisational learning capacity for NGOs with respect to their role in a networked civil society. With the model we can observe the types of knowledge produced and learning employed by organisations. • There are elements of professionalisation in third sector work organisational activity with respect to its accreditation, sources and routines of learning, knowledge claims, interaction with the statutory sector, recognition in cross-sector partnerships etc. • It signals that there is a dual embeddedness in the development of the sector at the core to the shaping the sector’s professional status. This is instrumental in the NGOs’ goal to gain influence as institutions, as they are only one part of a cross-sector mission to address complex societal problems The case study material highlights nuances of knowledge production and learning practices in partnerships, with dual embeddedness a main feature of the findings. This provides some clues to how professionalisation as expert-making takes shape in organisations: • Depending on the type of organisations’ purpose, over its course of development there is an increase in participation in multiple networks, as opposed to reliance on a single strategic partner for knowledge artefacts and practices; • Some types of organisations are better connected within international and national networks than others and there seem to be preferences for each depending on the area of work; • The level of interpretation or adaptation of the knowledge artefacts is related to an organisation’s embeddedness locally, in turn giving it more influence within the network of key institutions; An overreaching theme across taxonomy categories (Table 1)is “professionalisation” or developing organisational “expertise”, embodied at the individual, organisational, and sector levels. Questions relevant to the exercise of power arise: Is competence in managing a dual embeddedness signals the development of a dual identity in professionalisation? Is professionalisation in this sense a sign of organisations maturing into more capable partners to the arguably more experienced (Western) institutions, shifting the power balance? Or is becoming more professional a sign of domestication to the agenda of certain powerful stakeholders, who define the boundaries of the profession? Which dominant dynamics can be observed in a broadly-defined transition country civil society, where individual participation in the form of activism may be overtaking the traditional forms of organised development work, especially with the spread of social media?

Sovereignty, Article 4(2) TEU and the Respect of National Identities: Swinging the Balance of Power in Favour of the Member States?

The question of whether and to what extent sovereignty has been transferred to the European Union (EU) from its Member States remains a central debate within the EU and is interlinked with issues such as Kompetenz-Kompetenz, direct effect and primacy. Central to any claim to sovereignty is the principle of primacy, which requires that Member States uphold EU law over national law where there is a conflict. However, limitations to primacy can traditionally be found in national jurisprudence and the Maastricht Treaty introduced a possible EU limitation with the requirement that the EU respect national identities of Member States. The Lisbon Treaty provided only minimal further support to the principle of primacy whilst simultaneously developing the provision on national identities, now found within Article 4(2) TEU. There are indications from the literature, national constitutional courts and the Court of Justice of the EU that the provision is gathering strength as a legal tool and is likely to have a wider scope than the text might indicate. In its new role, Article 4(2) TEU bolsters the Member States’ claim to sovereignty and the possibility to uphold aspects crucial to them in conflict with EU law and the principle of primacy. Consequently, it is central to the relationship between the constitutional courts of the Member States and the CJEU, and where the final elements of control remain in ‘hard cases’. However, it does so as part of EU law, thereby facilitating the evasion of direct fundamental conflicts and reflecting the concept of constitutional pluralism.

Exploring figures of merit associated with the suboptimum operation of class-E power amplifiers

Closed-form design equations for the operation of a class-E amplifier for zero switch voltage slope and arbitrary duty cycle are derived. This approach allows an additional degree of freedom in the design of class-E amplifiers which are normally designed for 50 duty ratio. The analysis developed permits the selection of non-unique solutions where amplifier efficiency is theoretically 100 but power output capability is less than that the 50 duty ratio case would permit. To facilitate comparison between 50 (optimal) and non-50 (suboptimal) duty ratio cases, each important amplifier parameter is normalised to its corresponding optimum operation value. It is shown that by choosing a non-50 suboptimal solution, the operating frequency of a class-E amplifier can be extended. In addition, it is shown that by operating the amplifier in the suboptimal regime, other amplifier parameters, for example, transistor output capacitance or peak switch voltage, can be included along with the standard specification criteria of output power, DC supply voltage and operating frequency as additional input design specifications. Suboptimum class-E operation may have potential advantages for monolithic microwave integrated circuit realisation as lower inductance values (lower series resistance, higher self-resonance frequency, less area) may be required when compared with the results obtained for optimal class-E amplifier synthesis. The theoretical analysis conducted here was verified by harmonic balance simulation, with excellent agreement between both methods. © The Institution of Engineering and Technology 2007.

Analysis and Design of Class-E3F and Transmission-Line Class-E3F2 Power Amplifiers

In this paper, analysis and synthesis approach for two new variants within the Class-EF power amplifier (PA) family is elaborated. These amplifiers are classified here as Class-E3 F2 and transmission-line (TL) Class-E3 F 2. The proposed circuits offer means to alleviate some of the major issues faced by existing topologies such as substantial power losses due to the parasitic resistance of the large inductor in the Class-EF load network and deviation from ideal Class-EF operation due to the effect of device output inductance at high frequencies. Both lumped-element and transmission-line load networks for the Class-E 3 F PA are described. The load networks of the Class-E3 F and TL Class-E 3 F2amplifier topologies developed in this paper simultaneously satisfy the Class-EF optimum impedance requirements at fundamental frequency, second, and third harmonics as well as simultaneously providing matching to the circuit optimum load resistance for any prescribed system load resistance. Optimum circuit component values are analytically derived and validated by harmonic balance simulations. Trade-offs between circuit figures of merit and component values with some practical limitations being considered are discussed. © 2010 IEEE.

Intelligent demand response electric water heating to integrate wind power in Ireland

Dwindling fossil fuel resources and pressures to reduce greenhouse gas (GHG) emissions will result in a more diverse range of generation portfolios for future electricity systems. Irrespective of the portfolio mix the overarching requirement for all electricity suppliers and system operators is that supply instantaneously meets demand and that robust operating standards are maintained to ensure a consistent supply of high quality electricity to end-users. Therefore all electricity market participants will ultimately need to use a variety of tools to balance the power system. Thus the role of demand side management (DSM) with energy storage will be paramount to integrate future diverse generation portfolios. Electric water heating (EWH) has been studied previously, particularly at the domestic level to provide load control, peak shave and to benefit end-users financially with lower bills, particularly in vertically integrated monopolies. In this paper, a continuous Direct Load Control (DLC) EWH algorithm is applied in a liberalized market environment using actual historical electricity system and market data to examine the potential energy savings, cost reductions and electricity system operational improvements.

Integrating wind power using intelligent electric water heating

Dwindling fossil fuel resources and pressures to reduce greenhouse gas emissions will result in a more diverse range of generation portfolios for future electricity systems. Irrespective of the portfolio mix the overarching requirement for all electricity suppliers and system operators is to instantaneously meet demand, to operate to standards and reduce greenhouse gas emissions. Therefore all electricity market participants will ultimately need to use a variety of tools to balance the power system. Thus the role of demand side management with energy storage will be paramount to integrate future diverse generation portfolios. Electric water heating has been studied previously, particularly at the domestic level to provide load control, peak shave and to bene?t end-users ?nancially with lower bills, particularly in vertically integrated monopolies. In this paper a number of continuous direct load control demand response based electric water heating algorithms are modelled to test the effectiveness of wholesale electricity market signals to study the system bene?ts. The results are compared and contrasted to determine which control algorithm showed the best potential for energy savings, system marginal price savings and wind integration.

A Smart Grid Information System for Demand Side Participation: Remote Control of Domestic Appliances to Balance Demand

Due to the intermittent nature of renewable generation it is desirable to consider the potential of controlling the demand-side load to smooth overall system demand. The architecture and control methodologies of such a system on a large scale would require careful consideration. Some of these considerations are discussed in this paper; such as communications infrastructure, systems architecture, control methodologies and security. A domestic fridge is used in this paper as an example of a controllable appliance. A layered approach to smart-grid is introduced and it can be observed how each smart-grid component from physical cables, to the end-devices (or smart-applications) can be mapped to these set layers. It is clear how security plays an integral part in each component of the smart-grid so this is also an integral part of each layer. The controllable fridge is described in detail and as one potential smart-grid application which maps to the layered approach. A demonstration system is presented which involves a Raspberry Pi (a low-power, low-cost device representing the appliance controller).