Finite-element investigation of cold-formed steel portal frames in fire

This paper presents the results of a full-scale site fire test performed on a cold-formed steel portal frame building with semi-rigid joints. The purpose of the study is to establish a performance-based approach for the design of such structures in fire boundary conditions. In the full-scale site fire test, the building collapsed asymmetrically at a temperature of 714°C. A non-linear elasto-plastic finite-element shell model is described and is validated against the results of the full-scale test. A parametric study is presented that highlights the importance of in-plane restraint from the side rails in preventing an outwards sway failure for both a single portal and full building geometry model. The study also demonstrates that the semi-rigidity of the joints should be taken into account in the design. The single portal and full building geometry models display a close match to site test results with failure at 682°C and 704°C, respectively. A design case is described in accordance with Steel Construction Institute design recommendations. The validated single portal model is tested with pinned bases, columns protected, realistic loading and rafters subject to symmetric uniform heating in accordance with the ISO 834 standard fire curve; failure occurs at 703°C.

Non-Prismatic Sub-Stiffening for Stiffened Panel Plates — Stability Behaviour and Performance Gains

Previous work has demonstrated the potential to introduce plate element sub-stiffening to increase the local stability and thus static strength performance of integrally machined aluminium alloy stiffened panels. The introduction of plate element prismatic sub-stiffening modifies local plate buckling behaviour and within realistic design constraints, may produce sizable performance gains with equivalent mass designs. This article examines through experimental and computational analysis the potential of non-prismatic sub-stiffening for tailoring local plate stability performance. Using non-prismatic sub-stiffening, the experimental work demonstrates potential initial buckling performance gains with equivalent mass designs (+185%), and computationally, potential mass savings with equivalent static strength performance designs (-9.4%). (C) 2010 Elsevier Ltd. All rights reserved.

Design Methodology for Real-Time FPGA-Based Sound Synthesis

Explicit finite difference (FD) schemes can realise highly realistic physical models of musical instruments but are computationally complex. A design methodology is presented for the creation of FPGA-based micro-architectures for FD schemes which can be applied to a range of applications with varying computational requirements, excitation and output patterns and boundary conditions. It has been applied to membrane and plate-based sound producing models, resulting in faster than real-time performance on a Xilinx XC2VP50 device which is 10 to 35 times faster than general purpose and DSP processors. The models have developed in such a way to allow a wide range of interaction (by a musician) thereby leading to the possibility of creating a highly realistic digital musical instrument.

Combustible ionic liquids by design: is laboratory safety another ionic liquid myth?

The non-flammability of ionic liquids (ILs) is often highlighted as a safety advantage of ILs over volatile organic compounds (VOCs), but the fact that many ILs are not flammable themselves does not mean that they are safe to use near fire and/or heat sources; a large group of ILs ( including commercially available ILs) are combustible due to the nature of their positive heats of formation, oxygen content, and decomposition products.

Learning design contingent valuation (LDCV): NOAA guidelines, preference learning and coherent arbitrariness

We extend the contingent valuation (CV) method to test three differing conceptions of individuals' preferences as either (i) a-priori well-formed or readily divined and revealed through a single dichotomous choice question (as per the NOAA CV guidelines [K. Arrow, R. Solow, P.R. Portney, E.E. Learner, R. Radner, H. Schuman, Report of the NOAA panel on contingent valuation, Fed. Reg. 58 (1993) 4601-4614]); (ii) learned or 'discovered' through a process of repetition and experience [J.A. List, Does market experience eliminate market anomalies? Q. J. Econ. (2003) 41-72; C.R. Plott, Rational individual behaviour in markets and social choice processes: the discovered preference hypothesis, in: K. Arrow, E. Colombatto, M. Perleman, C. Schmidt (Eds.), Rational Foundations of Economic Behaviour, Macmillan, London, St. Martin's, New York, 1996, pp. 225-250]; (iii) internally coherent but strongly influenced by some initial arbitrary anchor [D. Ariely, G. Loewenstein, D. Prelec, 'Coherent arbitrariness': stable demand curves without stable preferences, Q. J. Econ. 118(l) (2003) 73-105]. Findings reject both the first and last of these conceptions in favour of a model in which preferences converge towards standard expectations through a process of repetition and learning. In doing so, we show that such a 'learning design CV method overturns the 'stylised facts' of bias and anchoring within the double bound dichotomous choice elicitation format. (C) 2007 Elsevier Inc. All rights reserved.

Reducing the future threat from (liver) fluke: realistic prospect or quixotic fantasy?

The liver fluke remains an economically significant parasite of livestock and is emerging as an important zoonotic infection of humans. The incidence of the disease has increased in the last few years, as a possible consequence of changes to the World's climate. Future predictions suggest that this trend is likely to continue. Allied to the changing pattern of disease, reports of resistance to triclabendazole (TCBZ) have appeared in the literature, although they do not all represent genuine cases of resistance. Nevertheless, any reports of resistance are a concern, because triclabendazole is the only drug that has high activity against the migratory and damaging juvenile stages of infection. How to deal with the twin problems (of increasing incidence and drug resistance) is the overall theme of the session on “Trematodes: Fasciola hepatica epidemiology and control” and of this review to introduce the session.

Greater knowledge of fluke epidemiology and population genetics will highlight those regions where surveillance is most required and indicate how quickly resistant populations of fluke may arise. Models of disease risk are becoming increasingly sophisticated and precise, with more refined data analysis programmes and Geographic Information Systems (GIS) data. Recent improvements have been made in our understanding of the action of triclabendazole and the ways in which flukes have become resistant to it. While microtubules are the most likely target for drug action, tubulin mutations do not seem to be involved in the resistance mechanism. Rather, upregulation of drug uptake and metabolism processes appear to be more important and the data relating to them will be discussed. The information may help in the design of new treatment strategies or pinpoint potential molecular markers for monitoring fluke populations. Advances in the identification of novel targets for drugs and vaccines will be made by the various “-omics” technologies that are now being applied to Fasciola. A major area of concern in the current control of fasciolosis is the lack of reliable tests for the diagnosis of drug (TCBZ) resistance. This has led to inaccurate reports of resistance, which is hindering successful disease management, as farmers may be encouraged to switch to less effective drugs. Progress with the development of a number of new diagnostic tests will be reviewed.

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

A numerical method is developed to simulate complex two-dimensional crack propagation in quasi-brittle materials considering random heterogeneous fracture properties. Potential cracks are represented by pre-inserted cohesive elements with tension and shear softening constitutive laws modelled by spatially varying Weibull random fields. Monte Carlo simulations of a concrete specimen under uni-axial tension were carried out with extensive investigation of the effects of important numerical algorithms and material properties on numerical efficiency and stability, crack propagation processes and load-carrying capacities. It was found that the homogeneous model led to incorrect crack patterns and load–displacement curves with strong mesh-dependence, whereas the heterogeneous model predicted realistic, complicated fracture processes and load-carrying capacity of little mesh-dependence. Increasing the variance of the tensile strength random fields with increased heterogeneity led to reduction in the mean peak load and increase in the standard deviation. The developed method provides a simple but effective tool for assessment of structural reliability and calculation of characteristic material strength for structural design.

Impact of composite ply continuity constraints on aerospace stiffened panel design

Considering the development of aerospace composite components, designing for reduced manufacturing layup cost and structural complexity is increasingly important. While the advantage of composite materials is the ability to tailor designs to various structural loads for minimum mass, the challenge is obtaining a design that is manufacturable and minimizes local ply incompatibility. The focus of the presented research is understanding how the relationships between mass, manufacturability and design complexity, under realistic loads and design requirements, can be affected by enforcing ply continuity in the design process. Presented are a series of sizing case studies on an upper wing cover, designed using conventional analyses and the tabular laminate design process. Introducing skin ply continuity constraints can generate skin designs with minimal ply discontinuities, fewer ply drops and larger ply areas than designs not constrained for continuity. However, the reduced design freedom associated with the addition of these constraints results in a weight penalty over the total wing cover. Perhaps more interestingly, when considering manual hand layup the reduced design complexity is not translated into a reduced recurring manufacturing cost. In contrast, heavier wing cover designs appear to take more time to layup regardless of the laminate design complexity. © 2012 AIAA.