In-situ FT-IR spectroscopic studies of fuel cell electro-catalysis: From single-crystal to nanoparticle surfaces

The work presented in this article shows the power of the variable temperature, in-situ FT-IR spectroscopy system developed in Newcastle with respect to the investigation of fuel cell electro-catalysis. On the Ru(0001) electrode surface, CO co-adsorbs with the oxygen-containing adlayers to form mixed [CO+(2x2)-O(H)] domains. The electro-oxidation of the Ru(0001) surface leads to the formation of active (1x1)-O(H) domains, and the oxidation of adsorbed CO then takes place at the perimeter of these domains. At 20 degrees C, the adsorbed CO is present as rather compact islands. In contrast, at 60 degrees C, the COads is present as a relatively looser and weaker adlayer. Higher temperature was also found to facilitate the surface diffusion and oxidation of COads. No dissociation or electro-oxidation of methanol was observed at potentials below approximately 950mV; however, the Ru(0001) surface at high anodic potentials was observed to be very active. On both Pt and PtRu nanoparticle surfaces, only one linear bond CO adsorbate was formed from methanol adsorption, and the PtRu surface significantly promoted both methanol dissociative adsorption to CO and its further oxidation to CO2. Increasing temperature from 20 to 60 degrees C significantly facilitates the methanol turnover to CO2.

Transparency Proposals for European Sovereign Bond Markets

The debate over the possible extension of transparency regulation in Europe to include sovereign bonds has opened up a number of other issues in need of serious consideration. One such issue is the appropriateness of the entire infrastructure supporting the trading of European sovereign bonds. In recent years sovereign issuers have supported the development of an electronic inter-dealer market but have remained unconcerned with the opacity of dealer-to-customer trading. The degree of segmentation in this market is high relative to what exists in nearly all other financial markets. This paper explores why European sovereign bond markets have developed in such a segmented way and considers how this structure could be altered to improve transparency without adversely affecting liquidity, efficiency or the benefits enjoyed by primary dealers and issuers. It is suggested that the structure of the market could be improved greatly if the largest and most active investors were permitted access to the inter-dealer electronic trading platforms. This would solve a number of market imperfections and increase the proportion of market activity that is conducted in a transparent way. The paper argues that sovereign issuers in Europe have the means to provide incentives that would influence dealers to support reduced segmentation. Some practical examples of how this could be achieved are provided and the potential benefits are outlined.

A note on the prediction of liquid hold-up with the stratified roll wave regime for gas/liquidco-current flow in horizontal pipes.

This note presents a simple model for prediction of liquid hold-up in two-phase horizontal pipe flow for the stratified roll wave (St+RW) flow regime. Liquid hold-up data for horizontal two-phase pipe flow [1, 2, 3, 4, 5 and 6] exhibit a steady increase with liquid velocity and a more dramatic fall with increasing gas rate as shown by Hand et al. [7 and 8] for example. In addition the liquid hold-up is reported to show an additional variation with pipe diameter. Generally, if the initial liquid rate for the no-gas flow condition gives a liquid height below the pipe centre line, the flow patterns pass successively through the stratified (St), stratified ripple (St+R), stratified roll wave, film plus droplet (F+D) and finally the annular (A+D, A+RW, A+BTS) regimes as the gas rate is increased. Hand et al. [7 and 8] have given a detailed description of this progression in flow regime development and definitions of the patterns involved. Despite the fact that there are over one hundred models which have been developed to predict liquid hold-up, none have been shown to be universally useful, while only a handful have proven to be applicable to specific flow regimes [9, 10, 11 and 12]. One of the most intractable regimes to predict has been the stratified roll wave pattern where the liquid hold-up shows the most dramatic change with gas flow rate. It has been suggested that the momentum balance-type models, which give both hold-up and pressure drop prediction, can predict universally for all flow regimes but particularly in the case of the difficult stratified roll wave pattern. Donnelly [1] recently demonstrated that the momentum balance models experienced some difficulties in the prediction of this regime. Without going into lengthy details, these models differ in the assumed friction factor or shear stress on the surfaces within the pipe particularly at the liquid–gas interface. The Baker–Jardine model [13] when tested against the 0.0454 m i.d. data of Nguyen [2] exhibited a wide scatter for both liquid hold-up and pressure drop as shown in Fig. 1. The Andritsos–Hanratty model [14] gave better prediction of pressure drop but a wide scatter for liquid hold-up estimation (cf. Fig. 2) when tested against the 0.0935 m i.d. data of Hand [5]. The Spedding–Hand model [15], shown in Fig. 3 against the data of Hand [5], gave improved performance but was still unsatisfactory with the prediction of hold-up for stratified-type flows. The MARS model of Grolman [6] gave better prediction of hold-up (cf. Fig. 4) but deterioration in the estimation of pressure drop when tested against the data of Nguyen [2]. Thus no method is available that will accurately predict liquid hold-up across the whole range of flow patterns but particularly for the stratified plus roll wavy regime. The position is particularly unfortunate since the stratified-type regimes are perhaps the most predominant pattern found in multiphase lines.

Density functional and Monte Carlo studies of sulfur. I. Structure and bonding in S-n rings and chains (n=2-18) (vol 118, pg 9257, 2003)

Density functional calculations have been performed for ring isomers of sulfur with up to 18 atoms, and for chains with up to ten atoms. There are many isomers of both types, and the calculations predict the existence of new forms. Larger rings and chains are very flexible, with numerous local energy minima. Apart from a small, but consistent overestimate in the bond lengths, the results reproduce experimental structures where known. Calculations are also performed on the energy surfaces of S8 rings, on the interaction between a pair of such rings, and the reaction between one S8 ring and the triplet diradical S8 chain. The results for potential energies, vibrational frequencies, and reaction mechanisms in sulfur rings and chains provide essential ingredients for Monte Carlo simulations of the liquid–liquid phase transition. The results of these simulations will be presented in Part II.

New binary direction aftereffect does not add up

Neural adaptation and inhibition are pervasive characteristics of the primate brain, and are probably understood better within the context of visual processing than any other sensory modality. These processes are thought to underlie illusions in which one motion affects the perceived direction of another, such as the direction aftereffect (DAE) and direction repulsion. The DAE describes how, following prolonged viewing of motion in one direction, the direction of a subsequently viewed test pattern is misperceived. In the case of direction repulsion, the direction difference between two transparently moving surfaces is over-estimated. Explanations of the DAE appeal to neural adaptation whilst direction repulsion is accounted for through lateral inhibition. Here we report on a new illusion, the Binary DAE, in which superimposed slow and fast dots moving in the same direction are perceived to move in different directions following adaptation to a mixed-speed stimulus. This new phenomenon is essentially a combination of the DAE and direction repulsion. Interestingly the magnitude of the binary DAE is greater than would be expected simply through a linear combination of the DAE and direction repulsion, suggesting that the mechanisms underlying these two phenomena interact in a non-linear fashion.

Reactions of One-Electron-Oxidized Methionine with Oxygen: An ab initio study

A one-electron oxidation of a methionine residue is thought to be a key step in the neurotoxicity of the beta amyloid peptide of Alzheimer's disease. The chemistry of the radical cation of N-formylmethioninamide (11+) and two model systems, dimethyl sulfide (1+) and ethyl methyl sulfide (6+), in the presence of oxygen have been studied by B3LYP/6-31G(d) and CBS-RAD calculations. The stable form of 11+ has a three-electron bond between the sulfur radical cation and the carbonyl oxygen atom of the i - 1 residue. The radical cation may lose a proton from the methyl or methylene groups flanking the oxidized sulfur. Both 11+ and the resultant C-centered radicals may add oxygen to form peroxy radicals. The calculations indicate that unlike C-centered radicals the sulfur radical cation does not form a covalent bond to oxygen but rather forms a loose ion-induced dipole complex with an S-O separation of about 2.7 Å, and is bound by about 13 kJ mol-1 (on the basis of 1+ + O2). Direct intramolecular abstraction of an H atom from the C site is unlikely. It is endothermic by more than 20 kJ mol-1 and involves a high barrier (G = 79 kJ mol-1). The -to-S C-centered radicals will add oxygen to form peroxy radicals. The OH BDEs of the parent hydroperoxides are in the range of 352-355 kJ mol-1, similar to SH BDEs (360 kJ mol-1) and C-H BDEs (345-350 kJ mol-1). Thus, the peroxy radicals are oxidizing species comparable in strength to thiyl radicals and peptide backbone C-centered radicals. Each peroxy radical can abstract a hydrogen atom from the backbone C site of the Met residue to yield the corresponding C-centered radical/hydroperoxide in a weakly exothermic process with modest barriers in the range of 64-92 kJ mol-1.

One-way quantum computing in a decoherence-free subspace

We introduce a novel scheme for one-way quantum computing (QC) based on the use of information encoded qubits in an effective cluster state resource. With the correct encoding structure, we show that it is possible to protect the entangled resource from phase damping decoherence, where the effective cluster state can be described as residing in a decoherence-free subspace (DFS) of its supporting quantum system. One-way QC then requires either single or two-qubit adaptive measurements. As an example where this proposal can be realized, we describe an optical lattice set-up where the scheme provides robust quantum information processing. We also outline how one can adapt the model to provide protection from other types of decoherence.

Deactivation and regeneration of ruthenium on silica in the liquid-phase hydrogenation of butan-2-one

A Ru/SiO2 catalyst was investigated for the liquid-phase hydrogenation of butan-2-one to butan-2-ol with water as a medium. Although excellent reactivity was observed, a gradual deactivation of the catalyst was found on recycle of the catalyst. The spent catalyst was characterized by using XRD, XPS, TEM, TPR, CO chemisorption, FTIR and ICP analyses. Formation of Ru(OH)(x) surface species is proposed to be the main cause of catalyst deactivation with no significant Ru leaching into the reaction mixture. Following catalyst regeneration, up to 85% of the initial catalytic activity could be recovered successfully. Moreover, adsorption of secondary aliphatic alcohols on the catalyst was found to significantly reduce the formation of Ru(OH)(x) during the reaction, thus protecting the catalyst from deactivation.

The relationship between counterfactual thinking and emotional reactions to event outcomes: Does one account fit all?

By enabling a comparison between what is and what might have been, counterfactual thoughts amplify our emotional responses to bad outcomes. Well-known demonstrations such as the action effect (the tendency to attribute most regret to a character whose actions brought about a bad outcome) and the temporal order effect (the tendency to undo the last in a series of events leading up to a bad outcome) are often explained in this way. An important difference between these effects is that outcomes are due to decisions in the action effect, whereas in the temporal order effect outcomes are achieved by chance. In Experiment 1, we showed that imposing time pressure leads to a significant reduction in the action but not in the temporal order effect. In Experiment 2, we found that asking participants to evaluate the protagonists (

Visible-light-sensitized near-infrared luminescence from rare-earth complexes of the 9-hydroxyphenalen-1-one ligand

The unique absorption properties of the 9-hydroxyphenalen-1-one (HPHN) ligand have been exploited to obtain visible-light-sensitizable rare-earth complexes in 1: 3 and 1: 4 metal-to-ligand ratios. In both stoichiometries (1:3,tris,Ln(PHN)3;1:4, tetrakis, A[ Ln( PHN)(4)], with Ln being a trivalent rare-earth ion and A being a monovalent cation), the complexes of Nd(III),Er( III), and Yb(III) show typical near-infrared luminescence upon excitation with visible light with wavelengths up to 475 nm. The X-ray crystal structures of the tris complexes show solvent coordination to the central rare-earth ion, whereas in the tetrakis complexes, the four PHN-ligands form a protective shield around the central ion, preventing small solvent molecules from coordinating to the rare-earth ion, at least in the solid state.

Visible light sensitisation of europium(III) luminescence in a 9-hydroxyphenal-1-one complex

The 9-hydroxyphenal-1-one ligand forms stable 3 : 1 complexes with trivalent lanthanides, in which it acts as an antenna suitable for the visible light excitation ( up to 475 nm) of the trivalent europium ion.

Asymmetric rhodium carbenoid insertion into the Si-H bond.

Buck, Richard T.; Doyle, Michael P.; Drysdale, Martin J.; Ferris, Leigh; Forbes, David C.; Haigh, David; Moody, Christopher J.; Pearson, Neil D.; Zhou, Qi-Lin. Dep. Chemistry, Loughborough Univ., Loughborough, Leicestershire, UK. Tetrahedron Letters (1996), 37(42), 7631-7634. Publisher: Elsevier, CODEN: TELEAY ISSN: 0040-4039. Journal written in English. CAN 125:328854 AN 1996:644681 CAPLUS (Copyright (C) 2009 ACS on SciFinder (R)) Abstract Decompn. of Me 2-diazophenylacetate in the presence of dimethylphenylsilane and a chiral dirhodium(II) catalyst results in Si-H insertion of the intermediate carbenoid to give PhCH(SiMe2Ph)CO2Me with varying degrees of enantioselectivity (up to 47% ee; 47% using (S)-Rh2L4, LH = I).

Wear paths produced by individual hip-replacement patients— A large-scale, long-term follow-up study

Wear particle accumulation is one of the main contributors to osteolysis and implant failure in hip replacements. Altered kinematics produce significant differences in wear rates of hip replacements in simulator studies due to varying degrees of multidirectional motion. Gait analysis data from 153 hip-replacement patients 10-years post-operation were used to model two- and three-dimensional wear paths for each patient. Wear paths were quantified in two dimensions using aspect ratios and in three dimensions using the surface areas of the wear paths, with wear-path surface area correlating poorly with aspect ratio. The average aspect ratio of the patients wear paths was 3.97 (standard deviation ¼ 1.38), ranging from 2.13 to 10.86. Sixty percent of patients displayed aspect ratios between 2.50 and 3.99. However, 13% of patients displayed wear paths with aspect ratios 45.5, which indicates reduced multidirectional motion. The majority of total hip replacement (THR) patients display gait kinematics which produce multidirectional wear paths, but a significant minority display more linear paths.

The determinants of performance appraisal systems: A note (Do Brown and Heywood's results for Australia hold up for Britain?)

This article offers a replication for Britain of Brown and Heywood's analysis of the determinants of performance appraisal in Australia. Although there are some important limiting differences between our two datasets - the Australia Workplace Industrial Relations Survey (AWIRS) and the Workplace Employment Relations Survey (WERS) - we reach one central point of agreement and one intriguing shared insight. First, performance appraisal is negatively associated with tenure: where employers cannot rely on the carrot of deferred pay or the stick of dismissal to motivate workers, they will tend to rely more on monitoring, ceteris paribus. Second, employer monitoring and performance pay may be complementary. However, consonant with the disparate results from the wider literature, there is more modest agreement on the contribution of specific human resource management practices, and still less on the role of job control.