X=Y-ZH COMPOUNDS AS POTENTIAL 1,3-DIPOLES .43. METAL-ION CATALYZED ASYMMETRIC 1,3-DIPOLAR CYCLOADDITION REACTIONS OF IMINES AND MENTHYL ACRYLATE

Metallo-azomethine ylides, generated from imines by the action of amine bases in combination with LiBr or AgOAc, undergo cycloaddition with both 1R, 2S, 5R- and 1S, 2R, 5S-menthyl acrylate at room temperature to give homochiral pyrrolidines in excellent yield. The stronger the base the faster the cycloaddition and the greater the yield with: 2-t-butyl-1,1,3,3-tetramethylguanidine > DBU > NEt(3) X-Ray crystal structures of representative cycloadducts establish that the absolute configuration of the newly established pyrrolidine stereocentres is independent of the metal salt and the size of the pyrrolidineC(2)-substituent for a series of aryl and aliphatic imines.

Multi component coupling reactions of N-acetyl-2-azetine

N-Acetyl-2-azetine undergoes Lewis acid catalysed formal [4+2]-cycloaddition with imines derived from aromatic amines to initially give an approximately 1: 1 mixture of exo-endo-diastereoisomeric 1-(2a,3,4,8b-tetrahydro-2H-1,4-diaza-cyclobuta[a]naphthalen-1-yl)-ethanone cycloadducts which were detected by proton NMR spectroscopy. These products, which were too unstable to isolate, and characterise, reacted further with aromatic amines to give 2,3,4-trisubstituted tetrahydroquinolines in good to excellent yield, predominantly as a single diastereoisomer, with the minor diastereoisomer converting to the major diastereoisomer on silica. The cycloaddition was irreversible and a mechanism is presented for the formation of the major diastereoisomer from the mixture of diastereoisomeric intermediates. A range of conditions is described for converting the 2,3,4-trisubsitituted tetrahydroquinolines into 2,3-disubstituted quinolines.

Three component coupling reactions of N-acetyl-2-azetine-rapid stereoselective entry to 2,3,4-trisubstituted tetrahydroquinolines

N-Acetyl-2-azetine undergoes Lewis acid catalysed [4 + 2]-cycloaddition with imines derived from aromatic amines and gave a 1:1 mixture of exo-endo diastereoisomeric azetidine cycloadducts which reacted further with aromatic amine, to give 2,3,4-trisubsitituted tetrahydroquinolines in good to excellent yield, predominantly as one diastereoisomer.

Unprecedented regio and stereocontrol in Povarov reaction of benzylidene-(3-nitrophenyl) amine

Typically, Povarov reactions of imines derived from aromatic amines and aromatic aldehydes show poor exo/endo-stereoselectivity and to date no data is available on the regioselectivity of the cyclisation when 3-substituted imines are employed. We have demonstrated that reaction using acyclic enamides as the alkene component with 3-nitro substituted imines is completely regioselective and gave only the 5-nitro substituted tetrahydroquinoline. As a bonus the reaction also became completely exo-selective with the stereochemistry of the E-alkene preserved in the tetrahydroquinoline product.

TIME-RESOLVED RESONANCE RAMAN-SPECTROSCOPY OF TRIPLET-STATE METALATED AND FREE-BASE TETRAARYLPORPHYRINS

Resonance Raman spectra of the T-1 excited states of Zn and free-base tetra-4-sulfonatophenylporphyrin (TPPS) have been recorded at room temperature in aqueous solution using two-colour time-resolved methods. The spectra of both sulfonated molecules are very similar to their tetraphenylporphyrin (TPP) analogues, which have been recorded in THF solution using the same pump-probe conditions, but they have higher signal-to-noise ratios because interference from strong solvent bands is reduced. Although two different T-1 spectra of Zn(TPP) have been reported these spectra differ slightly from each other and from the spectrum reported here, which has band positions very close (+/-6 cm(-1)) to those of Zn(TPPS). The high S/N ratios obtainable for the water-soluble porphyrins have allowed reliable polarization data to be recorded for their S-0 and T-1 states. This data set allows a realistic comparison of the changes in bonding associated with excitation of both free-base and Zn tetraarylporphyrins to the T-1 state.

Novel photocatalyst-based colourimetric indicator for oxygen: Use of a platinum catalyst for controlling response times

The preparation and characterisation of a novel, UV-activated, solvent-based, colourimetric indicator for oxygen is described, comprising a redox dye (methylene blue, MB), semiconductor photocatalyst (Pt-TiO2), and a sacrificial electron donor (SED = glycerol), all dispersed/dissolved in a polymer medium (sulfonated polystyrene. SPS). Upon exposure to UVA light, the Pt-TiO2/MB/glycerol/SPS oxygen indicator is readily photobleached as the MB is converted into its oxygen-sensitive, leuco form, LMB. In contrast to its non-platinised TiO2 counterpart (TiO2/MB/glycerol/SPS oxygen indicator), the recovery of the original colour is faster (ca. 1.5 days cf. 5 days at 21 degrees C). This is due to the catalytic action of the 0.38 wt% platinum loaded onto the semiconductor photocatalyst. TiO2, on the oxidation of the photogenerated LMB by ambient O-2. Furthermore, by increasing the level of platinum loading, recovery times can be decreased further; e.g. a Pt-TiO2/MB/glycerol/SPS oxygen indicator with platinum level of 1.52 wt% recovers fully within 12 h. A study of the kinetics of recovery as a function of film thickness revealed the recovery step is not controlled by the diffusion of O-2 through the film, but instead dependent upon the slow rate of oxidation of LMB to MB by O-2 in the low dielectric polymer encapsulation medium. Other work showed this recovery is only moderately dependant upon temperatures above -10 degrees C and very sensitive to relative humidity above 30% RH. Potential uses of this UV light activated indicator are discussed briefly. (C) 2011 Elsevier B.V. All rights reserved.

Novel photocatalyst-based colourimetric indicator for oxygen

The preparation and characterisation of a novel, UV-activated solvent-based, colourimetric indicator for O-2 is described, comprising a redox dye (methylene blue, MB), semiconductor photocatalyst (TiO2), and a sacrificial electron donor (SED), all dispersed/dissolved in a polymer medium (sulfonated polystyrene, SPS). Upon exposure, the indicator is readily photobleached as the MB is converted into its oxygen-sensitive, leuco form, LMB. Unlike its water-based counterpart, the recovery of the original colour is very slow (ca. 5 days cf. 6 min), probably due to the largely hydrophobic nature of the polymer encapsulation medium. The kinetics of film photobleaching appear to fit very well, in terms of: irradiance, [TiO2] and [MB], to the usual Langmuir-Hinshelwood type equation associated with a photocatalytic process. The glycerol appears not only to function as a SED, but also a plasticizer and medium for dye dissolution. The kinetics of colour recovery of the photobleached film appear directly dependent upon the ambient level of O-2 but shows a more complex dependence upon the relative humidity, RH. The photobleached film does not recover any of its colour over a 24 h period if the RH

The synthesis and chemistry of formylphosphonate

New methods of synthesis and reactions of formylphosphonate have been investigated. Attempts to deprotect the corresponding diethyl acetal with Ti-IV halides led instead to the formation of halo(ethoxy)methylphosphonates which undergo substitution reactions with a wide range of nucleophiles. The products of reactions of formylphosphonate with bifunctional nucleophiles are determined in most cases by Baldwin's Roles, while the imines derived from formylphosphonate undergo Diels-Alder reactions only in those cases which carry a strongly electron-withdrawing N-substituent.

Regioselective synthesis of pyrroloquinolines - Approaches to martinelline.

Indium trichloride catalysed Diels-Alder reaction of imines derived from anilines with cyclic enamides regioselectively gave the biologically important pyrroloquinoline nucleus, with a cis ring junction, in moderate yield. Although the euo:endo selectivity was in most cases poor, these isomers are readily separated by flash chromatography. The functionality tolerated at both C2 and C7 should allow further elaboration to Martinelline (C) 1999 Published by Elsevier Science Ltd. All rights reserved.

Aza-annulation of enaminones with itaconic anhydride:kinetic preference for exocyclic enamide products

Enaminones react with itaconic anhydride in methylene chloride at room temperature to give exocyclic enamides sis the major products. These can be readily equilibrated to the thermodynamically more stable endocyclic enamides. In substrates where the exocyclic isomer could not be formed only intractable materials were produced from this reaction. An intermediate in this two step process was detected and identified by proton and C-13 NMR spectroscopy. In two cases chiral enaminones were employed and the relative stereochemistry at the new chiral centre in the product was established by a crystal structure of compound 27.

Direct spun aligned carbon nanotube web-reinforced proton exchange membranes for fuel cells

A new method combining electrospinning of SPEEK and direct spinning of CNT forests has been used to prepare sulfonated poly(ether ether ketone) (SPEEK)/directly spinnable carbon nanotube (dsCNT) composite proton exchange membranes. The SPEEK/dsCNT membrane is more robust than SPEEK alone, and in a fuel cell significantly outperforms both SPEEK and the commercial Nafion 212 membranes.