Comparison of techniques to screen and characterize bacteria-specific hybridomas for high-quality monoclonal antibodies selection

Antibodies are are very important materials for diagnostics. A rapid and simple hybridoma screening method will help in delivering specific monoclonal antibodies. In this study, we systematically developed the first antibody array to screen for bacteria-specific monoclonal antibodies using Listeria monocytogenes as a bacteria model. The antibody array was developed to expedite the hybridoma screening process by printing hybridoma supernatants on a glass slide coated with an antigen of interest. This screening method is based on the binding ability of supernatants to the coated antigen. The bound supernatants were detected by a fluorescently labeled anti-mouse immunoglobulin. Conditions (slide types, coating, spotting, and blocking buffers) for antibody array construction were optimized. To demonstrate its usefulness, antibody array was used to screen a sample set of 96 hybridoma supernatants in comparison to ELISA. Most of the positive results identified by ELISA and antibody array methods were in agreement except for those with low signals that were undetectable by antibody array. Hybridoma supernatants were further characterized with surface plasmon resonance to obtain additional data on the characteristics of each selected clone. While the antibody array was slightly less sensitive than ELISA, a much faster and lower cost procedure to screen clones against multiple antigens has been demonstrated. (C) 2011 Elsevier Inc. All rights reserved.

Laser-driven generation of high-quality ultra-relativistic positron beams

An ultra-relativistic electron beam propagating through a high-Z solid triggersan electromagnetic cascade, whereby a large number of high-energy photons andelectron–positron pairs are produced mainly via the bremsstrahlung and Bethe–Heitler processes, respectively. These mechanisms are routinely used to generatepositron beams in conventional accelerators such as the electron–positron collider(LEP). Here we show that the application of similar physical mechanisms to a laserdrivenelectron source allows for the generation of high-quality positron beams in amuch more compact and cheaper configuration. We anticipate that the applicationof these results to the next generation of lasers might open the pathway for therealization of an all-optical high-energy electron–positron collider.

Reversal in gender valuations of cataract surgery after the implementation of free screening and low-priced high-quality surgery in a rural population of southern China.

PURPOSE: To assess the impact of community outreach and the availability of low-cost surgeries [500 Renminbi (RMB) or 65 United States dollars (US$) per surgery] on the willingness to pay for cataract surgery among male and female rural-dwelling Chinese.METHODS: Cross-sectional willingness-to-pay surveys were conducted at the initiation of a cataract outreach programme in June 2001 and then again in July 2006. Respondents underwent visual acuity testing and provided socio-demographic data.RESULTS: In 2001 and 2006, 325 and 303 subjects, respectively, were interviewed. On average the 2006 sample subjects were of similar age, more likely to be female (p < 0.01), illiterate (p < 0.01), and less likely to come from a household with annual income of less than US$789 (62% vs. 87%, p < 0.01). Familiarity with cataract surgery increased from 21.2% to 44.4% over the 5 years for male subjects (p < 0.01) and 15.8%-44.4% among females (p < 0.01). The proportion of respondents willing to pay at least 500 RMB for surgery increased from 67% to 88% (p < 0.01) among male subjects and from 50% to 91% (p < 0.01) among females.CONCLUSIONS: Five years of access to free cataract testing and low-cost surgery programmes appears to have improved the familiarity with cataract surgery and increased the willingness to pay at least 500 RMB (US$65) for it in this rural population. Elderly women are now as likely as men to be willing to pay at least 500 RMB, reversing gender differences present 5 years ago.

Impact of long-term storage at ambient temperatures on the total quality and stability of high-pressure processed tomato juice

High-pressure processing (HPP) can produce tomato juice of high quality and safety with a short shelf life under refrigeration temperatures. Long-term higher temperature storage studies are rare and temperature tolerant products are challenging to develop. The effect of high-pressure processing (HPP) on the total quality (colour, microbial counts, phytochemical levels, antioxidant and enzymatic activities) and stability (retention over time) of tomato juice during long-term storage was investigated. Thermal processing (TP) was used as a control treatment, and overall, two different ambient conditions (20 °C and 28 °C) were tested. Immediately after processing, HPP products proved superior to TP ones (enhanced redness, total carotenoids and lycopene, stable total phenols and inactivation of pectin methyl esterase). During initial storage (30 d) most quality attributes of HPP juice remained stable. Prolonged storage, however, led to losses of most quality attributes, although HPP (20 °C) showed lower quality degradation rate constants comparison to TP and HPP (28 °C). Industrial Relevance: There is a demand for ambient stable tomato products, especially in some parts of the world, and current industrial practices (canning, pasteurisation) either compromise in product quality or require refrigeration conditions. High-pressure processing has been investigated as milder technology, with a potential to deliver superior quality. The drawback is that is also requires chill storage. The results of this study show how quality parameters behave in a high-pressured tomato product and pave the way for further development that could optimise this technology. This could be of economic importance for the tomato juice industry to develop new products stable in ambient temperatures and perhaps beneficial for cutting down the refrigeration costs under specific conditions.

Effect of temperature and mixing conditions on quality and consistency of poly(methyl methacrylate) bone cement

The mixing of poly(methyl methacrylate) (PMMA) bone cement has been studied to develop methods for preparing a consistently high quality cement. A novel droplet test experimental procedure was developed that characterised the wetting characteristics involved in bone cement mixing. Using this technique it was established that increased wetting occurred by mixing bone cement at a lower temperature (-28 degreesC) than normal mixing at room temperature.

The incidence of esophageal cancer and high-grade dysplasia in Barrett's esophagus: A systematic review and meta-analysis

Barrett's esophagus is a well-recognized precursor of esophageal adenocarcinoma. Surveillance of Barrett's esophagus patients is recommended to detect high-grade dysplasia (HGD) or early cancer. Because of wide variation in the published cancer incidence in Barrett's esophagus, the authors undertook a systematic review and meta-analysis of cancer and HGD incidence in Barrett's esophagus. Ovid Medline (Ovid Technologies, Inc., New York, New York) and EMBASE (Elsevier, Amsterdam, the Netherlands) databases were searched for papers published between 1950 and 2006 that reported the cancer/HGD risk in Barrett's esophagus. Where possible, early incident cancers/HGD were excluded, as were patients with HGD at baseline. Forty-seven studies were included in the main analysis, and the pooled estimate for cancer incidence in Barrett's esophagus was 6.1/1,000 person-years, 5.3/1,000 person-years when early incident cancers were excluded, and 4.1/1,000 person-years when both early incident cancer and HGD at baseline were excluded. Corresponding figures for combined HGD/cancer incidence were 10.0 person-years, 9.3 person-years, and 9.1/1,000 person-years. Compared with women, men progressed to cancer at twice the rate. Cancer or HGD/cancer incidences were lower when only high-quality studies were analyzed (3.9/1,000 person-years and 7.7/1,000 person-years, respectively). The pooled estimates of cancer and HGD incidence were low, suggesting that the cost-effectiveness of surveillance is questionable unless it can be targeted to those with the highest cancer risk.

Diffraction-limited performance and focusing of high harmonics from relativistic plasmas

When a pulse of light reflects from a mirror that is travelling close to the speed of light, Einstein's theory of relativity predicts that it will be up-shifted to a substantially higher frequency and compressed to a much shorter duration. This scenario is realized by the relativistically oscillating plasma surface generated by an ultraintense laser focused onto a solid target. Until now, it has been unclear whether the conditions necessary to exploit such phenomena can survive such an extreme interaction with increasing laser intensity. Here, we provide the first quantitative evidence to suggest that they can. We show that the occurrence of surface smoothing on the scale of the wavelength of the generated harmonics, and plasma denting of the irradiated surface, enables the production of high-quality X-ray beams focused down to the diffraction limit. These results improve the outlook for generating extreme X-ray fields, which could in principle extend to the Schwinger limit.

Assessment of sample quality in soft clay using shear wave velocity and suction measurements

The characterisation of soils for civil engineering purposes depends on removing sufficiently high-quality samples from the ground. Accurate evaluation of sample quality is therefore important if reliable design parameters are to be determined. This paper describes the use of unconfined shear wave velocity (V _s) and suction (u _r) measurements to assess sample quality rapidly in soft clay. Samples of varying quality from three well-characterised soft clay sites are initially assessed using conventional techniques, and their results compared with V _s and u _r measurements performed on the same samples. It is observed that the quality of samples indicated by these measurements is very similar to those inferred from traditional disturbance measures, with V _s being the more reliable indicator. A tentative empirically derived criterion, based on samples tested in this project, is proposed to quantify sample disturbance combining both V _s and u _r measurements. Further work using this criterion on different materials is important so as to test its usefulness.

HIGH-FIDELITY MUSIC CODING AT 4 BITS.

A very high-quality sub-band ADPCM music coding scheme which compresses high-fidelity music signals, bandlimited to 15kHz, to an equivalent PCM representation of only 4 bits per sample, is described. By processing music sampled at 32 kHz, this coder exhibits a total bit rate of only 128kbit/s and is consequently applicable to the ISDN. Subjective tests conducted with this coder have shown that music recovered from the compression scheme is essentially indistinguishable from the original material. The results obtained are of major importance, not only for ISDN and broadcasting, but also for other digital audio technology such as compact disc (CD) and digital audio tape.

Characterisation of UK and Irish Cold-Pressed Rapeseed Oils in Relation to Quality Indices and Constituents.

Cold-pressed rapeseed oil (CPRSO) is produced when seeds from an oilseed rape crop are mechanically crushed whilst at a low temperature. CPRSO’s popularity is rapidly expanding and is now produced in most Northern European countries including both N.Ireland and ROI. The CPRSO industry is still relatively new and therefore not as widely researched as other high quality oils. Fifteen CPRSO from The UK, Ireland and France were examined to determine characteristic differences between the oils. Two samples of extra-virgin olive oil and two samples of refined rapeseed oil were also included in the investigation to assess performance against market competitors. The antioxidant potential of the oils was assessed using the ABTS and DPPH radical scavenging assays. Both unexpectedly showed that refined rapeseed oil had the highest potential whilst there was significant difference between many of the CPRSO’s. The acid value (ACOS method Cd 3d-63) ranged widely from 0.47-3.41. To predict the stability during storage, an accelerated oxidation test was carried out where the oils were placed in an oven (60°C) and peroxide value was monitored. The results showed extra-virgin olive oil underwent the least oxidation during the trial. The refined rapeseed oil suffered the worst levels of oxidation whilst the CPRSO’s performed similarly but with some variation. Fatty acid composition was investigated with GC-MS and some of the major fatty acids were found to differ significantly between producers. Minor compound analysis was achieved with extraction and identification through HPLC. All results are critically discussed and compared to relevant published studies.

Predictability in high-stakes examinations: students' perspectives on a perennial assessment dilemma

Key debates within educational assessment continuously encourage us to reflect on the design, delivery and implementation of examination systems as well as their relevance to students. In more recent times, such reflections have also required a rethinking of who is authoritative about assessment issues and whose views we seek in order to better understand these perennial assessment dilemmas. This paper considers one such dilemma, predictability in high-stakes assessment, and presents students’ perspectives on this issue. The context is the Irish Leaving Certificate (LC) taken by upper secondary students (aged between 16 and 18) in order (mainly) to enter tertiary-level education. The data come from 13 group interviews with 81 students across a range of schools in Ireland. Listening to students about complex, high-stakes examining problems has a limited history within the educational assessment literature. The findings from the study address this shortcoming and depict how students’ insightful reflections can improve our understanding of these dilemmas. Further, students are more than able to reflect on their own situations with regard to high stakes examining contexts and have important contributions to make to our fuller understanding of those elements that will promote high quality and fair assessment.

High-energy monoenergetic proton beams from two stage acceleration with a slow laser pulse

We present a new regime to generate high-energy quasimonoenergetic proton beams in a "slow-pulse" regime, where the laser group velocity vg<c is reduced by an extended near-critical density plasma. In this regime, for properly matched laser intensity and group velocity, ions initially accelerated by the light sail (LS) mode can be further trapped and reflected by the snowplough potential generated by the laser in the near-critical density plasma. These two acceleration stages are connected by the onset of Rayleigh-Taylor-like (RT) instability. The usual ion energy spectrum broadening by RT instability is controlled and high quality proton beams can be generated. It is shown by multidimensional particle-in-cell simulation that quasimonoenergetic proton beams with energy up to hundreds of MeV can be generated at laser intensities of 1021W/cm².