Parameter sensitivity for optimal design of 65 nm node SOI transistors

Mixed-mode simulation, where device simulation is embedded directly within a circuit simulator, is used for the first time to provide scaling guidelines to achieve optimal digital circuit performance for double gate SOI MOSFETs. This significant advance overcomes the lack of availability of SPICE model parameters. The sensitivity of the gate delay and on-off current ratio to each of the key geometric and technological parameters of the transistor is quantified. The impact of the source-drain doping profile on circuit performance is comprehensively investigated.

V-band 57-65 GHz receiver

A simple V-band radio IQ receiver architecture based around a six-port monolithic microwave integrated circuit (MMIC) is presented. The receiver assembly is designed to cover the 57-65 GHz broadband wireless communication system frequency allocation. The receiver that has an integral 10 dB microstrip antenna consumes 120 mW of dc power and occupies an area of 23 mm x 16 mm. The receiver can be used in heterodyne or in homodyne mode and has the capacity to demodulate quadrature amplitude modulation (QAM), binary phase shift keying (BPSK)/quadrature phase shift keying (QPSK)/offset quadrature phase shift keying (OQPSK). At 60 GHz the receiver can operate over 10 m range for transmitter effective isotropic radiated power (EIRP) of 20 dBm.

Melt Processing and Properties of Polyamide 6/Graphene Nanoplatelet Composites

Graphene, due to its outstanding properties, has become the topic of much research activity in recent years. Much of that work has been on a laboratory scale however, if we are to introduce graphene into real product applications it is necessary to examine how the material behaves under industrial processing conditions. In this paper the melt processing of polyamide 6/graphene nanoplatelet composites via twin screw extrusion is investigated and structure–property relationships are examined for mechanical and electrical properties. Graphene nanoplatelets (GNPs) with two aspect ratios (700 and 1000) were used in order to examine the influence of particle dimensions on composite properties. It was found that the introduction of GNPs had a nucleating effect on polyamide 6 (PA6) crystallization and substantially increased crystallinity by up to 120% for a 20% loading in PA6. A small increase in crystallinity was observed when extruder screw speed increased from 50 rpm to 200 rpm which could be attributed to better dispersion and more nucleation sites for crystallization. A maximum enhancement of 412% in Young's modulus was achieved at 20 wt% loading of GNPs. This is the highest reported enhancement in modulus achieved to date for a melt mixed thermoplastic/GNPs composite. A further result of importance here is that the modulus continued to increase as the loading of GNPs increased even at 20 wt% loading and results are in excellent agreement with theoretical predictions for modulus enhancement. Electrical percolation was achieved between 10–15 wt% loading for both aspect ratios of GNPs with an increase in conductivity of approximately 6 orders of magnitude compared to the unfilled PA6.

Access to a Car and the Self-Reported Health and Mental Health of People Aged 65 and Older in Northern Ireland

This article examines relationships between access to a car and the self- reported health and mental health of older people. The analysis is based on a sample of N 1⁄4 65,601 individuals aged 65 years and older from the Northern Ireland Longitudinal Study linked to 2001 and 2011 census returns. The findings from hierarchical linear and binary logistic multilevel path models indicate that having no access to a car is related to a considerable health and mental health disadvantage particularly for older people who live alone. Rural–urban health and mental health differences are mediated by access to a car. The findings support approaches that emphasize the importance of autonomy and independence for the well-being of older people and indicate that not having access to a car can be a problem for older people not only in rural but also in intermediate and urban areas, if no sufficient alternative forms of mobility are provided.

‘Do you want to see my hornpipe?’: the traditional Irish dancing body at play in the work of Jean Butler and Colin Dunne’, in Anthony Shay and Barbara Sellers-Young (eds.), The Oxford Handbook of Dance and Ethnicity, Oxford: Oxford University Press, 2016, pp.41-65.

This chapter considers the radical reimaginings of traditional Irish step dance in the recent works of Jean Butler and Colin Dunne, in which the Irish step-dancing body is separated from its historical roots in nationalism, from the exhibitionism required by the competitive form, and from the spectacularization of the commercialized theatrical format. In these works the traditional form undergoes a critical interrogation in which the dancers attempt to depart from the determinacy of the traditional technique, while acknowledging its formation of their corporealities; the Irish step-dance technique becomes a springboard for creative experimentation. To consider the importance of the creative potential revealed by these works, this chapter contextualizes them within the dance background from which they emerged, outlining the history of competitive step dancing in Ireland, the “modernization” of traditional Irish dance with the emergence of Riverdance (1994), and the experiments of Ireland’s national folk theater, Siamsa Tíre.