Finite Element Application to Analysis, Testing, and Manufacturing of Satellite Structures

Designing satellite structures poses an ongoing challenge as the interaction between analysis, experimental testing, and manufacturing phases is underdeveloped. Finite Element Analysis for Satellite Structures: Applications to Their Design, Manufacture and Testing explains the theoretical and practical knowledge needed to perform design of satellite structures. By layering detailed practical discussions with fully developed examples, Finite Element Analysis for Satellite Structures: Applications to Their Design, Manufacture and Testing provides the missing link between theory and implementation.
Computational examples cover all the major aspects of advanced analysis; including modal analysis, harmonic analysis, mechanical and thermal fatigue analysis using finite element method. Test cases are included to support explanations an a range of different manufacturing simulation techniques are described from riveting to shot peening to material cutting. Mechanical design of a satellites structures are covered in three steps: analysis step under design loads, experimental testing to verify design, and manufacturing.
Stress engineers, lecturers, researchers and students will find Finite Element Analysis for Satellite Structures: Applications to Their Design, Manufacture and Testing a key guide on with practical instruction on applying manufacturing simulations to improve their design and reduce project cost, how to prepare static and dynamic test specifications, and how to use finite element method to investigate in more details any component that may fail during testing.

Domain annihilation due to temperature and thickness gradients in single-crystal BaTiO3

The manner in which 90? ferroelectric-ferroelastic domains respond to changes in temperature has been mapped in BaTiO3 single crystals using atomic force microscopy. Domain periodicity remains unaltered until approximately 2 ? C below the Curie temperature (TC ), whereupon domains coarsened dramatically. This behavior was successfully rationalized by considering the temperature dependence of the parameters associated with standard models of ferroelastic domain formation. However, while successful in describing the expected radical increase in equilibrium period with temperature, the model did not predict the unusual mechanism by which domain coarsening occurred; this was not continuous at a local level but instead involved discrete domain annihilation events. Subsequent insights from a combination of free energy analysis for the system and further experimental data from an analogous situation, in which domain period increases with increasing crystal thickness, suggested that domain annihilation is inevitable whenever a component of the relevant gradient that affects domain period is orientated parallel to the domain walls. Consistent with this thesis, we note that, for the observations presented herein, the thermal gradient possessed a significant component parallel to the domain walls. We suggest that domain annihilation is a general feature of domain structures in gradient fields.

Development of complex classical force fields through force matching to ab initio data: Application to a room-temperature ionic liquid

Recent experimental neutron diffraction data and ab initio molecular dynamics simulation of the ionic liquid dimethylimidazolium chloride ([dmim]Cl) have provided a structural description of the system at the molecular level. However, partial radial distribution functions calculated from the latter, when compared to previous classical simulation results, highlight some limitations in the structural description offered by force fieldbased simulations. With the availability of ab initio data it is possible to improve the classical description of [dmim]Cl by using the force matching approach, and the strategy for fitting complex force fields in their original functional form is discussed. A self-consistent optimization method for the generation of classical potentials of general functional form is presented and applied, and a force field that better reproduces the observed first principles forces is obtained. When used in simulation, it predicts structural data which reproduces more faithfully that observed in the ab initio studies. Some possible refinements to the technique, its application, and the general suitability of common potential energy functions used within many ionic liquid force fields are discussed.

Effect of offset web holes on web crippling strength of cold-formed steel channel sections under end-two-flange loading condition

A combination of experiments and non-linear finite element analyses are used to investigate the effect of offset web holes on the web crippling strength of cold-formed steel channel sections under the end-two-flange (ETF) loading condition; the cases of both flanges fastened and unfastened to the support are considered. The web holes are located at the mid-depth of the sections, with a horizontal clear distance of the web holes to the near edge of the bearing plate. Finite element analysis results are compared against the laboratory test results; good agreement was obtained in terms of both strength and failure modes. A parametric study was then undertaken to investigate both the effect of the position of holes in the web and the cross-section sizes on the web crippling strength of the channel sections. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the depth of the web, and the ratio of the distance from the edge of the bearing to the flat depth of the web. Design recommendations in the form of web crippling strength reduction factors are proposed in this study.

FEM Analysis to Optimally Design End Mill cutters for Milling of Ti-6Al-4V

This paper presents an FEM analysis conducted for optimally designing end mill cutters through verifying the cutting tool forces and stresses for milling Titanium alloy Ti-6Al-4 V. Initially, the theoretical tool forces are calculated by considering the cutting edge on a cutting tool as the curve of an intersection over a spherical/flat surface based on the model developed by Lee & Altinas [1]. Considering the lowest tool forces the cutting tool parameters are taken and optimal design of end mill is decided for different sizes. Then the 3D CAD models of the end mills are developed and used for Finite Element Method to verify the cutting forces for milling Ti-6Al-4 V. The cutting tool forces, stress, strain concentration (s), tool wear, and temperature of the cutting tool with the different geometric shapes are simulated considering Ti-6Al-4 V as work piece material. Finally, the simulated and theoretical values are compared and the optimal design of cutting tool for different sizes are validated. The present approach considers to improve the quality of machining surface and tool life with effects of the various parameters concerning the oblique cutting process namely axial, radial and tangential forces. Various simulated test cases are presented to highlight the approach on optimally designing end mill cutters.

Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition - Part II: Parametric study and proposed design equations

A parametric study of cold-formed steel sections with web openings subjected to web crippling under end-one-flange (EOF) loading condition is undertaken, using finite element analysis, to investigate the effects of web holes and cross-section sizes. The holes are located either centred above the bearing plates or with a horizontal clear distance to the near edge of the bearing plates. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the depth of the web, the ratio of the length of bearing plates to the flat depth of the web and the location of the holes as defined by the distance of the hole from the edge of the bearing plate divided by the flat depth of web. In this study, design recommendations in the form of web crippling strength reduction factor equations are proposed, which are conservative when compared with the experimental and finite element results.

Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - Part II: Parametric study and proposed design equations

A parametric study of cold-formed steel sections with web openings subjected to web crippling was undertaken using finite element analysis, to investigate the effects of web holes and cross-section sizes on the web crippling strengths of channel sections subjected to web crippling under both interior-two-flange (ITF) and end-two-flange (ETF) loading conditions. In both loading conditions, the hole was centred beneath the bearing plate. It was demonstrated that the main factors influencing the web crippling strength are the ratio of the hole depth to the flat depth of the web, and the ratio of the length of bearing plates to the flat depth of the web. In this paper, design recommendations in the form of web crippling strength reduction factors are proposed, that are conservative to both the experimental and finite element results.

Rapid climate change did not cause population collapse at the end of the European Bronze Age

The impact of rapid climate change on contemporary human populations is of global concern. To contextualize our understanding of human responses to rapid climate change it is necessary to examine the archeological record during past climate transitions. One episode of abrupt climate change has been correlated with societal collapse at the end of the northwestern European Bronze Age. We apply new methods to interrogate archeological and paleoclimate data for this transition in Ireland at a higher level of precision than has previously been possible. We analyze archeological 14C dates to demonstrate dramatic population collapse and present high-precision proxy climate data, analyzed through Bayesian methods, to provide evidence for a rapid climatic transition at ca. 750 calibrated years B.C. Our results demonstrate that this climatic downturn did not initiate population collapse and highlight the nondeterministic nature of human responses to past climate change.

Closed circuit rebreathing to achieve inert gas wash-in for multiple breath wash-out

Multiple breath wash-out (MBW) testing requires prior wash-in of inert tracer gas. Wash-in efficiency can be enhanced by a rebreathing tracer in a closed circuit. Previous attempts to deploy this did not account for the impact of CO2 accumulation on patients and were unsuccessful. We hypothesised that an effective rebreathe wash-in could be delivered and it would not alter wash-out parameters. Computer modelling was used to assess the impact of the rebreathe method on wash-in efficiency. Clinical testing of open and closed circuit wash-in–wash-out was performed in healthy controls and adult patients with cystic fibrosis (CF) using a circuit with an effective CO2 scrubber and a refined wash-in protocol. Wash-in efficiency was enhanced by rebreathing. There was no difference in mean lung clearance index between the two wash-in methods for controls (6.5 versus 6.4; p=0.2, n=12) or patients with CF (10.9 versus 10.8; p=0.2, n=19). Test time was reduced by rebreathe wash-in (156 versus 230 s for CF patients, p<0.001) and both methods were well tolerated. End wash-in CO2 was maintained below 2% in most cases. Rebreathe–wash-in is a promising development that, when correctly deployed, reduces wash-in time and facilitates portable MBW testing. For mild CF, wash-out outcomes are equivalent to an open circuit.

Genomic Analysis of Pseudomonas putida Phage tf with Localized Single-Strand DNA Interruptions

The complete sequence of the 46,267 bp genome of the lytic bacteriophage tf specific to Pseudomonas putida PpG1 has been determined. The phage genome has two sets of convergently transcribed genes and 186 bp long direct terminal repeats. The overall genomic architecture of the tf phage is similar to that of the previously described Pseudomonas aeruginosa phages PaP3, LUZ24 and phiMR299-2, and 39 out of the 72 products of predicted tf open reading frames have orthologs in these phages. Accordingly, tf was classified as belonging to the LUZ24-like bacteriophage group. However, taking into account very low homology levels between tf DNA and that of the other phages, tf should be considered as an evolutionary divergent member of the group. Two distinguishing features not reported for other members of the group were found in the tf genome. Firstly, a unique end structure - a blunt right end and a 4-nucleotide 3'-protruding left end - was observed. Secondly, 14 single-chain interruptions (nicks) were found in the top strand of the tf DNA. All nicks were mapped within a consensus sequence 5'-TACT/RTGMC-3'. Two nicks were analyzed in detail and were shown to be present in more than 90% of the phage population. Although localized nicks were previously found only in the DNA of T5-like and phiKMV-like phages, it seems increasingly likely that this enigmatic structural feature is common to various other bacteriophages.

The influence of providing perches and string on activity levels, fearfulness and leg health in commercial broiler chickens

The aim of this study was to assess the effect of providing environmental enrichment in the form of perches and string on the behaviour and welfare of commercial broiler chickens. Houses containing ~23 000 broiler chickens were assigned to one of four treatments in a 2×2 factorial design. Treatments involved two levels of access to perches (P) (present (24/house) ‘+P’ or absent ‘−P’) and two levels of access to string (S) (present (24/house) ‘+S’ or absent ‘−S’). All houses contained windows, and 30 straw bales were provided from day 10 of the rearing cycle. Treatments were applied in one of four houses on a single farm, and were replicated over four production cycles. Behaviour and leg health were observed in weeks 3 to 5 of the rearing cycle. Production performance and environmental parameters were also measured. There was an interaction between perches and age in the percentage of birds observed lying, with higher percentages of birds observed lying in the +P treatment than in the −P treatment during weeks 4 and 5. There was also a significant interaction between string and age in the percentage of birds observed in locomotion, with higher percentages observed in locomotion in the −S treatment than in the +S treatment during weeks 4 and 5. There was also an interaction between string and age in average gait scores, with lower gait scores in the +S treatment than in the −S treatment during weeks 3 and 5 but not within week 4. Daytime observations showed that perches and strings were used frequently, with one bout of perching occurring approximately every 80 s/perch, and one bout of pecking at string occurring every 78 s/string on average. There was a significant effect of age on use of perches (P<0.001) and string (P<0.001), with perching peaking during week 5 and string pecking peaking during week 3. We conclude that commercial broilers in windowed houses with access to straw bales display an interest in additional enrichment stimuli in the form of perches and string, and therefore that these stimuli have the potential to improve welfare. In addition, provision of string as a pecking device appeared to positively influence walking ability. However, this effect was numerically small, was only shown in certain weeks and was not reflected in the other leg health measure (latency to lie). The results also showed an apparent negative effect of string and perches on the activity levels of birds (recorded away from the immediate vicinity of these enrichments) towards the end of the production cycle. These results emphasise the need for further research into optimum design and layout of enrichment stimuli for modern broilers in windowed houses to ensure that their provision leads to clear welfare benefits.

Adjusting HIV Prevalence Estimates for Non-participation: an Application to Demographic Surveillance

Introduction: HIV testing is a cornerstone of efforts to combat the HIV epidemic, and testing conducted as part of surveillance provides invaluable data on the spread of infection and the effectiveness of campaigns to reduce the transmission of HIV. However, participation in HIV testing can be low, and if respondents systematically select not to be tested because they know or suspect they are HIV positive (and fear disclosure), standard approaches to deal with missing data will fail to remove selection bias. We implemented Heckman-type selection models, which can be used to adjust for missing data that are not missing at random, and established the extent of selection bias in a population-based HIV survey in an HIV hyperendemic community in rural South Africa.

Methods: We used data from a population-based HIV survey carried out in 2009 in rural KwaZulu-Natal, South Africa. In this survey, 5565 women (35%) and 2567 men (27%) provided blood for an HIV test. We accounted for missing data using interviewer identity as a selection variable which predicted consent to HIV testing but was unlikely to be independently associated with HIV status. Our approach involved using this selection variable to examine the HIV status of residents who would ordinarily refuse to test, except that they were allocated a persuasive interviewer. Our copula model allows for flexibility when modelling the dependence structure between HIV survey participation and HIV status.

Results: For women, our selection model generated an HIV prevalence estimate of 33% (95% CI 27–40) for all people eligible to consent to HIV testing in the survey. This estimate is higher than the estimate of 24% generated when only information from respondents who participated in testing is used in the analysis, and the estimate of 27% when imputation analysis is used to predict missing data on HIV status. For men, we found an HIV prevalence of 25% (95% CI 15–35) using the selection model, compared to 16% among those who participated in testing, and 18% estimated with imputation. We provide new confidence intervals that correct for the fact that the relationship between testing and HIV status is unknown and requires estimation.

Conclusions: We confirm the feasibility and value of adopting selection models to account for missing data in population-based HIV surveys and surveillance systems. Elements of survey design, such as interviewer identity, present the opportunity to adopt this approach in routine applications. Where non-participation is high, true confidence intervals are much wider than those generated by standard approaches to dealing with missing data suggest.