Generic SoC QR Array Processor for Adaptive Beamforming

A generic architecture for implementing a QR array processor in silicon is presented. This improves on previous research by considerably simplifying the derivation of timing schedules for a QR system implemented as a folded linear array, where account has to be taken of processor cell latency and timing at the detailed circuit level. The architecture and scheduling derived have been used to create a generator for the rapid design of System-on-a-Chip (SoC) cores for QR decomposition. This is demonstrated through the design of a single-chip architecture for implementing an adaptive beamformer for radar applications. Published as IEEE Trans Circuits and Systems Part II, Analog and Digital Signal Processing, April 2003 NOT Express Briefs. Parts 1 and II of Journal reorganised since then into Regular Papers and Express briefs

Comparison of adaptive beamforming and orthogonal STBC with outdated feedback

We compare the achievable performance of adaptive beamforming (A-BF) and adaptive orthogonal space time block coding (A-OSTBC) with outdated channel feedback. We extend our single user setup to multiuser diversity systems employing adaptive modulation, and illustrate the impact of feedback delay on the multiuser diversity gain with either A-OSTBC or A-BF. Using closed-form expressions for spectral efficiency and average BER of a multiuser diversity system derived in this paper, we prove that the A-BF scheme outperforms the A-OSTBC scheme with no feedback delay. However, when the feedback delay is large, the A-OSTBC scheme achieves better performance due to the reduced diversity advantage of A-BF. We observe that more transmit antennas bring higher spectral efficiency for BF. With small feedback delay, this becomes inverted using OSTBC, due to the effect of channel-hardening. Interestingly, however, we show that A-OSTBC with multiple users enjoys improved spectral efficiency when the number of transmit antennas is increased and the feedback delay is significant

SOME SYSTOLIC ARRAY DEVELOPMENTS IN THE UNITED KINGDOM.

Two major UK systolic array projects are described. The first concerns the development of a wavefront array processor for adaptive beamforming; the second concerns the design of bit-level systolic arrays for high-performance signal processing.

QRD and SVD processor design based on an approximate rotations algorithm

A silicon implementation of the Approximate Rotations algorithm capable of carrying the computational load of algorithms such as QRD and SVD, within the real-time realisation of applications such as Adaptive Beamforming, is described. A modification to the original Approximate Rotations algorithm to simplify the method of optimal angle selection is proposed. Analysis shows that fewer iterations of the Approximate Rotations algorithm are required compared with the conventional CORDIC algorithm to achieve similar degrees of accuracy. The silicon design studies undertaken provide direct practical evidence of superior performance with the Approximate Rotations algorithm, requiring approximately 40% of the total computation time of the conventional CORDIC algorithm, for a similar silicon area cost. © 2004 IEEE.

Parameterizable QR core

The design of a generic QR core for adaptive beamforming is presented. The work relies on an existing mapping technique that can be applied to a triangular QR array in such a way to allow the generation of a range of QR architectures. All scheduling of data inputs and retiming to include processor latency has been included within the generic representation.

Two-Stage Transmitter Precoding Based on Data-Driven Code Hopping and Partial Zero Forcing Beamforming for MC-DCMA Communications

This paper proposes a hybrid transmission technique based on adaptive code-to-user allocation and linear precoding for the downlink of phase shift keying (PSK) based multi-carrier code division multiple access (MC-CDMA) systems. The proposed scheme is based on the separation of the instantaneous multiple access interference (MAI) into constructive and destructive components taking into account the dependency on both the channel variation and the instantaneous symbol values of the active users. The first stage of the proposed technique is to adaptively distribute the available spreading sequences to the users on a symbol-by-symbol basis in the form of codehopping with the objective to steer the users' instantaneous crosscorrelations to yield a favourable constructive to destructive MAI ratio. The second stage is to employ a partial transmitter based zero forcing (ZF) scheme specifically designed for the exploitation of constructive MAI. The partial ZF processing decorrelates destructive interferers, while users that interfere constructively remain correlated. This results in a signal to interference-plus-noise ratio (SINR) enhancement without the need for additional power-per-user investment. It will be shown in the results section that significant bit error rate (BER) performance benefits can be achieved with this technique.

The adaptive value of polyembryony.

From an evolutionary standpoint, the production of offspring is the single most important aspect of an animal's life. Offspring carry an individual's genes into the next generation and it is the differential representation of genes in a population that drives evolutionary change. There are a variety of ways in which animals create offspring, ranging from cases where parents make identical copies of themselves by budding or parthenogenesis, to the standard case in vertebrates where gametes from a male and female fuse in sexual reproduction to produce the next generation. In this article we describe an usual variant of sexual reproduction, polyembryony.