Semi-empirical methods for determining the efflux velocity from a ship's propeller

The present study proposed the semi-empirical methods for determining the efflux velocity from a ship's propeller. Ryan [1] defined the efflux velocity as the maximum velocity taken from a time-averaged velocity distribution along the initial propeller plane. The Laser Doppler Anemometry (LDA) and Computational Fluid Dynamics (CFD) were used to acquire the efflux velocity from the two propellers with different geometrical characteristics. The LDA and CFD results were compared in order to investigate the equation derived from the axial momentum theory. The study confirmed the validation of the axial momentum theory and its linear relationship between the efflux velocity and the multiplication of the rotational speed, propeller diameter and the square root of thrust coefficient. The linear relationship of these two terms is connected by an efflux coefficient and the value of this efflux coefficient reduced when the blade number increased.

Quantitative structure-toxicity relationships for chlorophenols to bioluminescent lux-marked bacteria using atom-based semi-empirical molecular-orbital descriptors

Literature data on the toxicity of chlorophenols for three luminescent bacteria (Vibrio fischeri, and the lux-marked Pseudomonas fluorescens 10586s pUCD607 and Burkholderia spp. RASC c2 (Tn4431)) have been analyzed in relation to a set of computed molecular physico-chemical properties. The quantitative structure-toxicity relationships of the compounds in each species showed marked differences when based upon semi-empirical molecular-orbital molecular and atom based properties. For mono-, di- and tri-chlorophenols multiple linear regression analysis of V. fischeri toxicity showed a good correlation with the solvent accessible surface area and the charge on the oxygen atom. This correlation successfully predicted the toxicity of the heavily chlorinated phenols, suggesting in V. fischeri only one overall mechanism is present for all chlorophenols. Good correlations were also found for RASC c2 with molecular properties, such as the surface area and the nucleophilic super-delocalizability of the oxygen. In contrast the best QSTR for P. fluorescens contained the 2nd order connectivity index and ELUMO suggesting a different, more reactive mechanism. Cross-species correlations were examined, and between V. fischeri and RASC c2 the inclusion of the minimum value of the nucleophilic susceptibility on the ring carbons produced good results. Poorer correlations were found with P. fluorescens highlighting the relative similarity of V. fischeri and RASC c2, in contrast to that of P. fluorescens.

A Novel Semi-Automated Method of Tracking Fetal Movements

We have designed software that can â€â€™look’’ at recorded ultrasound sequences. We analyzed fifteen video sequences representing recorded ultrasound scans of nine fetuses. Our method requires a small amount of user labelled pixels for processing the first frame. These initialize GrowCut 1 , a background removal algorithm, which was used for separating the fetus from its surrounding environment (segmentation). For each subsequent frame, user input is no longer necessary as some of the pixels will inherit labels from the previously processed frame. This results in our software’s ability to track movement. Two sonographers rated the results of our computer’s â€vision’ on a scale from 1 (poor fit) to 10 (excellent fit). They assessed tracking accuracy for the entire video as well as segmentation accuracy (the ability to identify fetus from non-fetus) for every 100th processed frame. There was no appreciable deterioration in the software’s ability to track the fetus over time. I

Numerical Method for Cost-Weight Optimisation of Stringer-Skin Panels

The need to integrate cost into the early product definition process as an engineering parameter is addressed. The application studied is a fuselage panel that is typical for commercial transport regional jets. Consequently, a semi-empirical numerical analysis using reference data was coupled to model the structural integrity of thin-walled structures with regard to material failure and buckling: skin, stringer, flexural, and interrivet. The optimization process focuses on direct operating cost (DOC) as a function of acquisition cost and fuel burn. It was found that the ratio of acquisition cost to fuel burn was typically 4:3 and that there was a 10% improvement in the DOC for the minimal DOC condition over the minimal weight condition because of the manufacturing cost saving from having a reduced number of larger-area stringers and a slightly thicker skin than that preferred by the minimal weight condition. Also note that the minimal manufacturing cost condition was slightly better than the minimal weight condition, which highlights the key finding: The traditional minimal weight condition is a dated and suboptimal approach to airframe structural design.

A generic tool for cost estimating in aircraft design

A methodology to estimate the cost implications of design decisions by integrating cost as a design parameter at an early design stage is presented. The model is developed on a hierarchical basis, the manufacturing cost of aircraft fuselage panels being analysed in this paper. The manufacturing cost modelling is original and relies on a genetic-causal method where the drivers of each element of cost are identified relative to the process capability. The cost model is then extended to life cycle costing by computing the Direct Operating Cost as a function of acquisition cost and fuel burn, and coupled with a semi-empirical numerical analysis using Engineering Sciences Data Unit reference data to model the structural integrity of the fuselage shell with regard to material failure and various modes of buckling. The main finding of the paper is that the traditional minimum weight condition is a dated and sub-optimal approach to airframe structural design.

Model calculations for copper clusters on Au(111) surfaces

Using the semi-empirical embedded-atom method, the structure of small copper clusters on Au(111) surfaces has been investigated both by static and dynamic calculations. By varying the size of roughly circular clusters, the edge energy per atom is obtained; it agrees quite well with estimates based on experimental results. Small three-dimensional clusters tend to have the shape of a pyramid, whose sides are oriented in the directions of small surface energy. The presence of a cluster is found to distort the underlying lattice of adsorbed copper atoms. (C) 2002 Published by Elsevier Science B.V.

Modelling of the sodium complex of a calixarene tetraester in the 1,3-alternate conformation

This paper describes the use of molecular mechanics to model the geometry of the sodium complex of a calix[4] arene tetraester, in the 1,3-alternate conformation 1. Partial charges were assigned to the calixarene on the basis of semi-empirical (AM1, PM3, MNDO, INDO, CNDO and ZINDO) calculations and the binding of the sodium ion to the calixarene was modelled using molecular mechanics. Agreement between the optimised and X-ray structures of the complex was very good. The effect of placing the cation in different starting positions on the energy-minimised geometry of the complex is described.

Energy levels, wavefunction compositions and electric dipole transitions in neutral Ca

A configuration-interaction approach, based on the use of B-spline basis sets combined with a model potential including monoelectronic and dielectronic core polarization effects, is employed to calculate term energies and wavefunctions for neutral Ca. Results are reported for singlet and triplet bound states, and some quasi-bound states above the lowest ionization limit, with angular momentum up to L = 4. Comparison with experiment and with other theoretical results shows that this method yields the most accurate energy values for neutral Ca obtained to date. Wavefunction compositions, necessary for labelling the levels, and the effects of semi-empirical polarization potentials on the wavefunctions are discussed, as are some recent identifications of doubly-excited states. It is shown that taking into account dielectronic core polarization changes the energies of the lowest terms in Ca significantly, in general by a few hundred cm(-1), the effect decreasing rapidly for the higher bound states. For Rydberg states with n approximate to 7 the accuracy of the results is often better than a few cm(-1). For series members (or perturbers) with a pronounced 3d character the error can reach 150 cm(-1). The wavefunctions are used to calculate oscillator strengths and lifetimes for a number of terms and these are compared with existing measurements. The agreement is good but points to a need for improved measurements.

Theoretical and photoemission studies of the band structure of CdI

The band structure of CdI has been calculated using a modified semi-empirical tight-binding method and the results obtained have been compared with both angularly averaged and angularly resolved photoemission spectra. The theoretically computed density of states distribution is in excellent agreement with angularly averaged results and all the main features observed experimentally are reproduced in the theory. Angularly resolved spectra have been used to draw up energy band dispersion curves directly and agreement with calculated bands in both the Gamma M and Gamma K directions of the Brillouin zone is good.

A theoretical study of the effects of lithium intercalation on the electronic structure of TiS

The band structure of the intercalation complex of LiTiS has been computed using a semi-empirical tight-binding method and this is compared with the results of a revised TiS calculation. The results obtained confirm that changes in the basic electrical characteristics of TiS, which occur when it is intercalated with lithium, can be attributed to a rigid-band filling of its lowest unoccupied electron states as has previously been proposed. However, they also suggest that intercalation can act to alter the nature and the dispersion of some of the energy bands in the unintercalated crystal. The bands which are most affected by the process are those which derive from orbitals which have the same symmetry as the lithium 2s orbital, namely, the titanium 4s conduction level and the tightly bound sulphur 3s levels.

The band structures of gallium and indium selenide

The band structures of the group III-VI monochalcogenides GaSe and InSe have been calculated using a semi-empirical tight-binding method in a two-dimensional approximation. Many of the discrepancies between experimental work and previous calculations for GaSe have been resolved. The results for InSe appear for the first time.

Evaluation of predicted network modules in yeast metabolism using NMR-based metabolite profiling

Genome-scale metabolic models promise important insights into cell function. However, the definition of pathways and functional network modules within these models, and in the biochemical literature in general, is often based on intuitive reasoning. Although mathematical methods have been proposed to identify modules, which are defined as groups of reactions with correlated fluxes, there is a need for experimental verification. We show here that multivariate statistical analysis of the NMR-derived intra- and extracellular metabolite profiles of single-gene deletion mutants in specific metabolic pathways in the yeast Saccharomyces cerevisiae identified outliers whose profiles were markedly different from those of the other mutants in their respective pathways. Application of flux coupling analysis to a metabolic model of this yeast showed that the deleted gene in an outlying mutant encoded an enzyme that was not part of the same functional network module as the other enzymes in the pathway. We suggest that metabolomic methods such as this, which do not require any knowledge of how a gene deletion might perturb the metabolic network, provide an empirical method for validating and ultimately refining the predicted network structure.

Differential cross section measurements for elastic scattering of electrons from Ar2+ and Xe2+

A crossed-beams energy-loss spectrometer has been used to investigate angular distributions for electron scattering from Ar2+ and Xe2+ ions, at a collision energy of 16 eV. For Ar2+ the measurements are compared with the predictions of a partial waves calculation based on a semi-empirical potential, where it is shown that the interference term governs the position of the observed minimum in the angular distribution.

Elastic scattering of electrons from argon ions

A crossed-beams energy-loss spectrometer has been used to investigate angular distributions for electron scattering from Ar2+ and Ar3+ ions, at a collision energy of 16 eV. Results are compared with the predictions of a partial waves calculation based on a semi-empirical potential, and with the classical Rutherford formula.

Densities, speeds of sound, isentropic compressibilities, refractive indexes, and viscosities of tetrahydrofuran with haloalkane or alkyl ethanoate at T = 303.15 K

Isentropic compressibilities ?S, excess isentropic compressibilities image, excess molar volumes VE, viscosity deviations ??, and excess Gibbs energy of activation of viscous flow ?G*E for nine binary mixtures of C4H8O with CCl4, CHCl3, CHCl2CHCl2, 1-C6H13Cl, 1-C6H13Br, CH3CO2CH3, CH3CO2C2H5, CH3CO2C4H9, and CH3CO2C5H11 at 303.15 K have been derived from experimental densities ?, speeds of sound u, refractive indexes nD and viscosities ?. The limiting values of excess partial molar volumes of C4H8O at infinite dilution image in different solvents have been estimated. The results obtained for dynamic viscosity of binary mixtures were used to test the semi-empirical relations of Grunberg–Nissan, Tamura–Kurata, Hind–McLaughlin–Ubbelohde, Katti–Chaudhri, McAllister, Heric, and Auslaender. Finally, the experimental refractive indexes were compared with the predicted results for Lorentz–Lorenz, Dale–Gladstone, Eykman, Arago–Boit, Newton, Oster, Heller, and Wiener equations.