Towards a virtual testing environment for composite aerostructures

The emergence of an all-composite passenger airframe marks a major advance in the development of aerostructures. Underpinning this milestone is over four decades of intensive research in this area. Nonetheless, the first-generation of composite aerostructures is very conservative. This paper will discuss the need for the development of a virtual testing capability to enable better exploitation of the material's full potential in future designs. Recent progress, by the author, in this area is presented followed by a discussion of current limitations and opportunities for further research.

Lake Kumphawapi – an archive of Holocene palaeoenvironmental and palaeoclimatic changes in northeast Thailand

The long-term climatic and environmental history of Southeast Asia, and of Thailand in particular, is still fragmentary. Here we present a new 14C-dated, multi-proxy sediment record (TOC, C/N, CNS isotopes, Si, Zr, K, Ti, Rb, Ca elemental data, biogenic silica) for Lake Kumphawapi, the second largest natural lake in northeast Thailand. The data set provides a reconstruction of changes in lake status, groundwater fluctuations, and catchment run-off during the Holocene. A comparison of multiple sediment sequences and their proxies suggests that the summer monsoon was stronger between c. 9800 and 7000 cal yr BP. Lake status and water level changes around 7000 cal yr BP signify a shift to lower effective moisture. By c. 6500 cal yr BP parts of the lake had been transformed into a peatland, while areas of shallow water still occupied the deeper part of the basin until c. 5400–5200 cal yr BP. The driest interval in Kumphawapi's history occurred between c. 5200 and 3200 cal yr BP, when peat extended over large parts of the basin. After 3200 cal yr BP, the deepest part of the lake again turned into a wetland, which existed until c. 1600 cal yr BP. The observed lake-level rise after 1600 cal yr BP could have been caused by higher moisture availability, although increased human influence in the catchment cannot be ruled out. The present study highlights the use of multiple sediment sequences and proxies to study large lakes, such as Lake Kumphawapi in order to correctly assess the time transgressive response to past changes in hydroclimate conditions. Our new data set from northeast Thailand adds important palaeoclimatic information for a region in Southeast Asia and allows discussing Holocene monsoon variability and ITCZ movement in greater detail.

Exchange-correlation energy and potential as approximate functionals of occupied and virtual Kohn-Sham orbitals: Application to dissociating H-2

The standard local density approximation and generalized gradient approximations fail to properly describe the dissociation of an electron pair bond, yielding large errors (on the order of 50 kcal/mol) at long bond distances. To remedy this failure, a self-consistent Kohn-Sham (KS) method is proposed with the exchange-correlation (xc) energy and potential depending on both occupied and virtual KS orbitals. The xc energy functional of Buijse and Baerends [Mol. Phys. 100, 401 (2002); Phys. Rev. Lett. 87, 133004 (2001)] is employed, which, based on an ansatz for the xc-hole amplitude, is able to reproduce the important dynamical and nondynamical effects of Coulomb correlation through the efficient use of virtual orbitals. Self-consistent calculations require the corresponding xc potential to be obtained, to which end the optimized effective potential (OEP) method is used within the common energy denominator approximation for the static orbital Green's function. The problem of the asymptotic divergence of the xc potential of the OEP when a finite number of virtual orbitals is used is addressed. The self-consistent calculations reproduce very well the entire H-2 potential curve, describing correctly the gradual buildup of strong left-right correlation in stretched H-2. (C) 2003 American Institute of Physics.

Prospective, Randomized Assessment of Transfer of Training (ToT) and Transfer Effectiveness Ratio (TER) of Virtual Reality Simulation Training for Laparoscopic Skill Acquisition

OBJECTIVES:: We assessed the effectiveness of ToT from VR laparoscopic simulation training in 2 studies. In a second study, we also assessed the TER. ToT is a detectable performance improvement between equivalent groups, and TER is the observed percentage performance differences between 2 matched groups carrying out the same task but with 1 group pretrained on VR simulation. Concordance between simulated and in-vivo procedure performance was also assessed. DESIGN:: Prospective, randomized, and blinded. PARTICIPANTS:: In Study 1, experienced laparoscopic surgeons (n = 195) and in Study 2 laparoscopic novices (n = 30) were randomized to either train on VR simulation before completing an equivalent real-world task or complete the real-world task only. RESULTS:: Experienced laparoscopic surgeons and novices who trained on the simulator performed significantly better than their controls, thus demonstrating ToT. Their performance showed a TER between 7% and 42% from the virtual to the real tasks. Simulation training impacted most on procedural error reduction in both studies (32- 42%). The correlation observed between the VR and real-world task performance was r > 0·96 (Study 2). CONCLUSIONS:: VR simulation training offers a powerful and effective platform for training safer skills.

Exploring Virtual-Channel architecture in FPGA based Networks-on-Chip

A novel Networks-on-Chip (NoC) router architecture specified for FPGA based implementation with configurable Virtual-Channel (VC) is presented. Each pipeline stage of the proposed architecture has been optimized so that low packet propagation latency and reduced hardware overhead can be achieved. The proposed architecture enables high performance and cost effective VC NoC based on-chip system interconnects to be deployed on FPGA.

Hermit crabs perceive the extent of their virtual bodies

A flexible body image is required by animals if they are to adapt to body changes and move effectively within a structurally complex environment. Here, we show that terrestrial hermit crabs, Coenobita rugosus, which frequently change shells, can modify walking behaviour, dependent on the shape of the shell. Hermit crabs walked along a corridor that had alternating left and right corners; if it was narrow at the corner, crabs rotated their bodies to avoid the wall, indicating an awareness of environmental obstacles. This rotation increased when a plastic plate was attached to the shell. We suggest that the shell, when extended by the plate, becomes assimilated to the hermit crab's own body. While there are cases of a tool being assimilated with the body, our result is the first example of the habitat where an animal lives and/or carries being part of a virtual body. This journal is © 2012 The Royal Society.

The phase diagram of water at negative pressures: Virtual ices

The phase diagram of water at negative pressures as obtained from computer simulations for two models of water, TIP4P/2005 and TIP5P is presented. Several solid structures with lower densities than ice Ih, so-called virtual ices, were considered as possible candidates to occupy the negative pressure region of the phase diagram of water. In particular the empty hydrate structures sI, sII, and sH and another, recently proposed, low-density ice structure. The relative stabilities of these structures at 0 K was determined using empirical water potentials and density functional theory calculations. By performing free energy calculations and Gibbs-Duhem integration the phase diagram of TIP4P/2005 was determined at negative pressures. The empty hydrates sII and sH appear to be the stable solid phases of water at negative pressures. The phase boundary between ice Ih and sII clathrate occurs at moderate negative pressures, while at large negative pressures sH becomes the most stable phase. This behavior is in reasonable agreement with what is observed in density functional theory calculations.

‘5 ways to say your prayers’:The Art and Architecture of Curating People, Place and Creativity in a Post-Conflict Context. The Shed, Galway, Ireland 18th June – 23rd July 2013 Includes: 1. Co-Curation of Exhibition with Peter Mutschler, Director of PS² and 2. Morrow’s individual work as part of the exhibition, entitled ‘Departures & Arrivals: Academic Interactions with the Activities, Artists and Archive of PS² ’

This exhibition profiles the curatorial approach of PS² and the work of creative practitioners who have practiced alongside and with the organisation. PS² is a Belfast-based, voluntary arts organisation that initiates projects inside and outside its project space. It seeks to develop a socio-spatial practice that responds to the post-conflict context of Northern Ireland, with particular focus on active intervention and social interaction between local people, creative practitioners, multidisciplinary groups and theorists.
Morrow has collaborated with PS² since its inception in 2005, acting as curatorial advisor specifically on the projects that occur outside PS² . She regards her involvement as a parallel action to her pedagogical explorations within architectural education.

Morrow's personal contribution to the Exhibition aimed to:
-interrogate PS² spatial projects
-contextualise PS² curatorial practice
-open up the analytical framework and extend to similar local practices

The Shed, Galway, Ireland is a joint Galway City Arts and Harbour Company venture. The exhibition subsequently travelled to DarcSpace Gallery, Dublin (Sept 2013).

Laugh-aware virtual agent and its impact on user amusement

In this paper we present a complete interactive system en- abled to detect human laughs and respond appropriately, by integrating the information of the human behavior and the context. Furthermore, the impact of our autonomous laughter-aware agent on the humor experience of the user and interaction between user and agent is evaluated by sub- jective and objective means. Preliminary results show that the laughter-aware agent increases the humor experience (i.e., felt amusement of the user and the funniness rating of the film clip), and creates the notion of a shared social experience, indicating that the agent is useful to elicit posi- tive humor-related affect and emotional contagion.

Automated Methods for Virtual Maintainability & Aerospace Maintenance Planning

Abstract. Modern business practices in engineering are increasingly turning to post manufacture service provision in an attempt to generate additional revenue streams and ensure commercial sustainability. Maintainability has always been a consideration during the design process but in the past it has been generally considered to be of tertiary importance behind manufacturability and primary product function in terms of design priorities. The need to draw whole life considerations into concurrent engineering (CE) practice has encouraged companies to address issues such as maintenance, earlier in the design process giving equal importance to all aspects of the product lifecycle. The consideration of design for maintainability (DFM) early in the design process has the potential to significantly reduce maintenance costs, and improve overall running efficiencies as well as safety levels. However a lack of simulation tools still hinders the adaptation of CE to include practical elements of design and therefore further research is required to develop methods by which ‘hands on’ activities such as maintenance can be fully assessed and optimised as concepts develop. Virtual Reality (VR) has the potential to address this issue but the application of these traditionally high cost systems can require complex infrastructure and their use has typically focused on aesthetic aspects of mature designs. This paper examines the application of cost effective VR technology to the rapid assessment of aircraft interior inspection during conceptual design. It focuses on the integration of VR hardware with a typical desktop engineering system and examines the challenges with data transfer, graphics quality and the development of practical user functions within the VR environment. Conclusions drawn to date indicate that the system has the potential to improve maintenance planning through the provision of a usable environment for inspection which is available as soon as preliminary structural models are generated as part of the conceptual design process. Challenges still exist in the efficient transfer of data between the CAD and VR environments as well as the quantification of any benefits that result from the proposed approach. The result of this research will help to improve product maintainability, reduce product development cycle times and lower maintenance costs.