Coordinated Design of Phase Measurement Unit and Power System Stabilisers in Large Scale Power System

This paper presents a case-study of a PMU application with PSS support in a real large scale Chinese power system to suppress inter-area oscillations. The paper uses PMU measured feedback signals from a PSS input signal for dynamic torque analysis (DTA). In the paper, a mathematical model of multi-machine power system is described, followed by formation of the residue and DTA indices. Simulations of the model are used with a large-scale power system model to demonstrate the role of PSS and the equivalence of DTA residue indices.

Sequential measurement-based quantum computing with memories

We introduce a general scheme for sequential one-way quantum computation where static systems with long-living quantum coherence (memories) interact with moving systems that may possess very short coherence times. Both the generation of the cluster state needed for the computation and its consumption by measurements are carried out simultaneously. As a consequence, effective clusters of one spatial dimension fewer than in the standard approach are sufficient for computation. In particular, universal computation requires only a one-dimensional array of memories. The scheme applies to discrete-variable systems of any dimension as well as to continuous-variable ones, and both are treated equivalently under the light of local complementation of graphs. In this way our formalism introduces a general framework that encompasses and generalizes in a unified manner some previous system-dependent proposals. The procedure is intrinsically well suited for implementations with atom-photon interfaces.

Prospective clinical audit of chloral hydrate administration practices in a neonatal unit

Aim: Chloral hydrate is generally considered a safe and effective single dosing procedural sedative for neonates in the clinical setting. However, its safety profile as a repetitive dosing maintenance sedative is largely unknown. This study aimed to document current administration practices of chloral hydrate in the Neonatal Unit, Royal Children's Hospital, Melbourne, Australia, over a 6-month period.

Methods: Patients who had been prescribed chloral hydrate during the specified audit period were recruited into the study and prospectively followed for a period of 28 days, or until they were discharged from the unit. Demographic data were collected on recruitment, and daily documentation of chloral hydrate administration was recorded.

Results: A total of 238 doses of chloral hydrate were administered to a cohort of 32 patients during the study period. The majority of the audited doses (84%) were ordered as repeating doses. Doses were more likely to be given at night than during the day, and the median dosage for repetitive dosing was found to be above the study site's recommended dosing range. Pre-dose and/or post-dose assessment of distress/agitation accompanied dosage approximately half of the time. The audit did not reveal any recognisable pattern of sedation maintenance or weaning process for patients who received multiple doses.

Conclusions: Health-care professionals caring for hospitalised infants should be made aware of the potential risks of chloral hydrate as a repetitive dosing sedative, and of the importance of systematically evaluating the appropriateness and effectiveness of utilising such pharmacological intervention for managing and treating distress.

Implementing change in the neonatal unit: Part 1 – The evidence base

Pain management in premature and sick babies has long been recognised as a vital component of neonatal care; however practices pertaining to pain assessment and administration of analgesia remain variable in Neonatal Units (NNU). Sucrose has been identified as an effective agent in reducing pain during minor painful procedures in premature babies but the uptake has been modest.This article is the first of two, and will describe the rationale for implementation of sucrose administration as a measure for pain relief for minor procedures in one neonatal unit in Northern Ireland. Current literature relating to use of sucrose willbe utilised in generating debate and discussion around the implementation of Clinical Practice Guidelines (CPG) for Sucrose use.

Energy Efficiency through Significance-Based Computing

An extension of approximate computing, significance-based computing exploits applications' inherent error resiliency and offers a new structural paradigm that strategically relaxes full computational precision to provide significant energy savings with minimal performance degradation.

Loss-of-Mains Protection System by Application of Phasor Measurement Unit Technology with Experimentally Assessed Threshold Settings

Loss-of-mains protection is an important component of the protection systems of embedded generation. The role of loss-of-mains is to disconnect the embedded generator from the utility grid in the event that connection to utility dispatched generation is lost. This is necessary for a number of reasons, including the safety of personnel during fault restoration and the protection of plant against out-of-synchronism reclosure to the mains supply. The incumbent methods of loss-of-mains protection were designed when the installed capacity of embedded generation was low, and known problems with nuisance tripping of the devices were considered acceptable because of the insignificant consequence to system operation. With the dramatic increase in the installed capacity of embedded generation over the last decade, the limitations of current islanding detection methods are no longer acceptable. This study describes a new method of loss-of-mains protection based on phasor measurement unit (PMU) technology, specifically using a low cost PMU device of the authors' design which has been developed for distribution network applications. The proposed method addresses the limitations of the incumbent methods, providing a solution that is free of nuisance tripping and has a zero non-detection zone. This system has been tested experimentally and is shown to be practical, feasible and effective. Threshold settings for the new method are recommended based on data acquired from both the Great Britain and Ireland power systems.

Synergy Between an Improved Covariate Unit Root Test and Cross-sectionally Dependent Panel Data Unit Root Tests, with two Applications

This paper proposes the use of an improved covariate unit root test which exploits the cross-sectional dependence information when the panel data null hypothesis of a unit root is rejected. More explicitly, to increase the power of the test, we suggest the utilization of more than one covariate and offer several ways to select the ‘best’ covariates from the set of potential covariates represented by the individuals in the panel. Employing our methods, we investigate the Prebish-Singer hypothesis for nine commodity prices. Our results show that this hypothesis holds for all but the price of petroleum.

Process-variation resilient and voltage-scalable dct architecture for robust low-power computing

In this paper, we present a novel discrete cosine transform (DCT) architecture that allows aggressive voltage scaling for low-power dissipation, even under process parameter variations with minimal overhead as opposed to existing techniques. Under a scaled supply voltage and/or variations in process parameters, any possible delay errors appear only from the long paths that are designed to be less contributive to output quality. The proposed architecture allows a graceful degradation in the peak SNR (PSNR) under aggressive voltage scaling as well as extreme process variations. Results show that even under large process variations (±3σ around mean threshold voltage) and aggressive supply voltage scaling (at 0.88 V, while the nominal voltage is 1.2 V for a 90-nm technology), there is a gradual degradation of image quality with considerable power savings (71% at PSNR of 23.4 dB) for the proposed architecture, when compared to existing implementations in a 90-nm process technology. © 2006 IEEE.

Low-Power Process-Variation Tolerant Arithmetic Units Using Input-Based Elastic Clocking

In this paper we propose a design methodology for low-power high-performance, process-variation tolerant architecture for arithmetic units. The novelty of our approach lies in the fact that possible delay failures due to process variations and/or voltage scaling are predicted in advance and addressed by employing an elastic clocking technique. The prediction mechanism exploits the dependence of delay of arithmetic units upon input data patterns and identifies specific inputs that activate the critical path. Under iso-yield conditions, the proposed design operates at a lower scaled down Vdd without any performance degradation, while it ensures a superlative yield under a design style employing nominal supply and transistor threshold voltage. Simulation results show power savings of upto 29%, energy per computation savings of upto 25.5% and yield enhancement of upto 11.1% compared to the conventional adders and multipliers implemented in the 70nm BPTM technology. We incorporated the proposed modules in the execution unit of a five stage DLX pipeline to measure performance using SPEC2000 benchmarks [9]. Maximum area and throughput penalty obtained were 10% and 3% respectively.

Significance Driven Computation on Next-Generation Unreliable Platforms

In this paper, we propose a design paradigm for energy efficient and variation-aware operation of next-generation multicore heterogeneous platforms. The main idea behind the proposed approach lies on the observation that not all operations are equally important in shaping the output quality of various applications and of the overall system. Based on such an observation, we suggest that all levels of the software design stack, including the programming model, compiler, operating system (OS) and run-time system should identify the critical tasks and ensure correct operation of such tasks by assigning them to dynamically adjusted reliable cores/units. Specifically, based on error rates and operating conditions identified by a sense-and-adapt (SeA) unit, the OS selects and sets the right mode of operation of the overall system. The run-time system identifies the critical/less-critical tasks based on special directives and schedules them to the appropriate units that are dynamically adjusted for highly-accurate/approximate operation by tuning their voltage/frequency. Units that execute less significant operations can operate at voltages less than what is required for correct operation and consume less power, if required, since such tasks do not need to be always exact as opposed to the critical ones. Such scheme can lead to energy efficient and reliable operation, while reducing the design cost and overheads of conventional circuit/micro-architecture level techniques.

Intelligent Computing for Sustainable Energy and Environment (ICSEE 2012)

No Abstract available