A design model: the Autism Spectrum Disorder Classroom Design Kit

Architects and designers have a responsibility to provide an inclusive built environment. However for those with a diagnosis of Autism Spectrum Disorder (ASD), the built environment can be a frightening and confusing place, difficult to negotiate and tolerate. The challenge of integrating more fully into society is denied by an alienating built environment. For ASD pupils in a poorly designed school, their environment can distance them from learning. Instead, if more at ease in their surroundings, in an ASD-friendly environment, the ASD pupil stands a greater chance of doing better.

However a difficulty exists in that most architects are not knowledgeable in designing for those with ASD. Any available design guidelines for architects tend, because of the inherent difficulties associated with a spectrum, to be general in their information. Therefore, if wanting to provide an ASD-friendly learning environment, there is a need to ensure that teachers, as the experts, can most clearly and effectively impart their knowledge and requirements to architects.

This paper sets out the challenges and difficulties inherent in the design process when designing for ASD. It then sets out an alternative strategy to the usual method of drawing-centric dialogue between teacher and architect by using models instead as a basis for a more common language. An ASD Classroom Design Kit was designed and developed by Queen’s University of Belfast Architecture students. It was then used by ASD teaching staff from the Southern Education and Library Board in Northern Ireland as a case study to trial its effectiveness. The paper outlines how the study was carried out before concluding with reflections by both teaching staff and architect on using the ASD Classroom Design Kit.

It is hoped that this paper will firstly highlight the need for better dialogue between expert and architect when considering ASD and the Built Environment and secondly, that it may encourage others to consider using models to convey their ideas and knowledge when designing, not just for ASD, but for other Special Educational Needs and disabilities.

The Rank of Queen's Counsel: Judicial Perspectives

The rank of queen's counsel, granted under the royal prerogative, has been part of the architecture of the legal profession and legal system since 1594 but has undergone many changes in that time, including most recently the adoption of new selection procedures. Recent cases in Northern Ireland have raised the question - what is the legal position of queen's counsel? By examining decided cases in context, this paper aims to explain judicial perspectives on what it means to be a QC.

Merula

Merula is a thirty-minute work for bass flute and electronics, commissioned by Icelandic flautist Kolbeinn Bjarnason. The premiere took place in the Belfast Festival at Queen’s in November 2012. A recording will be made in 2014. Further performances in Iceland, Norway and Poland are anticipated in 2014-15. I have given a research seminar on this work at Queen’s and will deliver it again at the University of Oxford during 2013-14.

Research Goals
1) To develop an effective means of notating live electronics in a manner that would sustain the work's performance history beyond the current generation of software
2) To apply the techniques of transcription and spectralism used in my composition, Perseid, using birdsongs as source material
3) To explore the problem of sustaining large-scale form in music that is primarily fast
4) To facilitate the emergence of the solo bass flute as an important solo instrument through the completion of a new large-scale work

Methodology
• Methodologies employed in this project included sound recording, sound analysis and transcription, extensive precompositional sketching, electroacoustic techniques of sound manipulation, designing complex live processes of sound transformation and spatialisation
• A considerable part of this work was collaboration with the flautist, both in SARC and Iceland. Mr. Bjarnason was involved all stages of the work, frequently recording source materials and helping to ensure the idiomatic nature of the flute writing.
• Developing a means of notating the live electronics. Building on a model suggested by Pierre Boulez in Anthemes 2 (1998), the score of this work includes a technical manual that describes electronic processes in a manner that can be reprogrammed in subsequent generations of software. Combined with a system of notations employed in the full score, the technical manual will enable this composition to be performed by a wide range of performers and technical teams, with appropriately identical results.

Critical Dialogue in Architecture Studio: Peer Interaction and Feedback

Most tutors in architecture education regard studio-based learning to be rich in feedback due to is dialogic nature. Yet, student perceptions communicated via audits such as the UK National Student Survey appear to contradict this assumption and challenge the efficacy of design studio as a truly discursive learning setting. This paper presents findings from a collaborative study that was undertaken by the Robert Gordon University, Aberdeen, and Queen’s University Belfast that develop a deeper understanding of the role that peer interaction and dialogue plays within feedback processes, and the value that students attribute to these within the overall learning experience.

The paper adopts a broad definition of feedback, with emphasis on formative processes, and including the various kinds of dialogue that typify studio-based learning, and which constitute forms of guidance, direction, and reflection. The study adopted an ethnographic approach, gathering data on student and staff perceptions over the course of an academic year, and utilising methods embracing both quantitative and qualitative data.

The study found that the informal, socially-based peer interaction that characterises the studio is complementary to, and quite distinct from, the learning derived through tutor interaction. The findings also articulate the respective properties of informal and formally derived feedback and the contribution each makes to the quality of studio-based learning. It also identifies limitations in the use or value of peer learning, understanding of which is valuable to enhancing studio learning in architecture.

Understanding Student and Staff Perceptions of Feedback in Architecture: Summary Report

This report presents the results of a collaborative project between Queens University, Belfast and the Robert Gordon University, Aberdeen, and builds on a dialogue initiated during Session 2009-10 through which course guidance and feedback received by students was identified as an area requiring deeper understanding in order to enhance current practice

Aldo goes to Primary School: Experiencing school through the lens of the autistic spectrum.

The document draws largely on the results of research carried out by Hugh McNally and Dominic Morris of McNally Morris Architects and Keith McAllister of Queen’s University Belfast between 2012 and 2013. The objective of the study was to obtain a greater understanding of the impact that architecture and the built environment can have on people with autism spectrum disorder (ASD). The investigation into the subject centred on parents of young children with ASD in the belief that they are most likely to have an intimate knowledge of the issues that affect their children and are relatively well positioned to communicate those issues.

The study comprised a number of components.

- Focus Group Discussions with parents of children with ASD
- A Postal Questionnaire completed by parents of children with ASD
- A Comprehensive Desktop study of contemporary research into the relationship between ASD and aspects of the built environment.

Social stories are then used to help illustrate the world of a child with ASD to the reader and identify a series of potential difficulties for the pupil with ASD in a primary school setting. Design considerations and mitigating measures are then proposed for each difficulty.

The intention is that the document will raise awareness of some of the issues affecting primary school children with ASD and generate discourse among those whose task it is to provide an appropriate learning environment for all children. This includes teachers, health professionals, architects, parents, carers, school boards, government bodies and those with ASD themselves.

While this document uses the primary school as a lens through which to view some of the issues associated with ASD, it is the authors’ contention that the school can be seen as a “microcosm” for the wider world and that lessons taken from the learning environment can be applied elsewhere. The authors therefore hope that the document will help raise awareness of the myriad of issues for those with ASD that are embedded in the vast landscape of urban configurations and building types making up the spatial framework of our society.

Does flexibility in secondary level mathematics curriculum affect degree performance?

The authors have much experience in developing mathematics skills of first-year engineering students and attempting to ensure a smooth transition from secondary school to university. Concerns exist due to there being flexibility in the choice of modules needed to obtain a secondary level (A-level) mathematics qualification. This qualification is based on some core (pure maths) modules and a selection from mechanics and statistics modules. A survey of aerospace and mechanical engineering students in Queen’s University Belfast revealed that a combination of both mechanics and statistics (the basic module in both) was by far the most popular choice and therefore only about one quarter of this cohort had studied mechanics beyond the basic module within school maths. Those students who studied the extra mechanics and who achieved top grades at school subsequently did better in two core, first-year engineering courses. However, students with a lower grade from school did not seem to gain any significant advantage in the first-year engineering courses despite having the extra mechanics background. This investigation ties in with ongoing and wider concerns with secondary level mathematics provision in the UK.

SPHERE: Stormont Parliamentary Hansards: Embedded in Research and Education

SPHERE (Stormont Parliamentary Hansards: Embedded in Research and Education) was a JISC-funded project based at King’s College, London and Queen’s University, Belfast, working in Partnership with the Northern Ireland Assembly Library, and the NIA Official Report (Hansard). Its purpose was to assess the use, value and impact of The Stormont Papers digital resource, and to use the results of this assessment to make recommendations for a series of practical approaches to embed the resource within teaching, learning and research among the wider user community. The project began in November 2010 and was concluded in April 2010.

A series of formal reports on the project are published by JISC online at http://www.jisc.ac.uk/whatwedo/programmes/digitisation/impactembedding/sphere.aspx

SPHERE Impact analysis summary
Portable Document Format
SPHERE interviews report
SPHERE Outreach use case
SPHERE research use case
SPHERE teaching use_case
SPHERE web survey report
SPHERE web analysis

I’m all right, Jack.

Young men are wholly irresponsible when it comes to unintended teenage pregnancy, right? Quite the opposite, argue Áine Aventin and Maria Lohan from Queen’s University Belfast, but they have suffered from a void of educational support materials on how to deal with unintended pregnancy. Here they describe a new resource to fill it.

The Queen's Shilling:A collaboration with Goldin+Senneby

A performance art piece in the Centre for Contemporary Art, Derry/Londonderry as part of the City of Culture. International conceptual artists Goldin+Senneby commissioned me to write a short play inspired by their obsessions with alchemy, royalty and the financial markets. The play dramatises the suffering of Queen Elizabeth II as she confronts her own mortality in a world where she is an immortal symbol. Through a conversation with her predecessor Elizabeth I, she reveals that the whole stability of the financial system rests on the weight of her daily effluvia.

Developments in retrodirective array technology

There has been significant interest in retrodirective antennas, especially considering the wealth of applications that could be significantly enhanced, or created, by the use of such technology. There is enormous potential for retrodirective antennas where complicated automatic tracking systems would benefit from being replaced by much simpler systems. Retrodirective array technology offers one solution pathway since it can offer extremely fast tracking with relatively simple circuitry. Retrodirective or self-steering arrays are suited for low radio frequency (RF) power mobile terminal use particularly on or between un-stabilised vehicles. In this type of operational scenario, high degrees of relative movement are expected, and power consumption and weight of the antenna must be kept to a minimum. In this study, the authors give a brief historical review of basic retrodirective technology and elaborate on some recent developments at Queens University of Belfast associated with retrodirective antenna technology in relation to, two-way communications, ultrafast RADAR, microwave imaging, spatial power transmission, mitigation of multipath effects and spatial encryption.

The efficacy of a CDIO based integrated curriculum as preparation for professional practice in product design and development

The School of Mechanical and Aerospace Engineering at Queen’s University Belfast started BEng and MEng degree programmes in Product Design and Development (PDD) in 2004. Intended from the outset to be significantly different from the existing programmes within the School the PDD degrees used the syllabus and standards defined by the CDIO Initiative as the basis for an integrated curriculum. Students are taught in the context of conceiving, designing, implementing and operating a product. Fundamental to this approach is a core sequence of Design-Build-Test (DBT) experiences which facilitates the development of a range of professional skills as well as the immediate application of technical knowledge gained in strategically aligned supporting modules.
The key objective of the degree programmes is to better prepare students for professional practice. PDD graduates were surveyed using a questionnaire developed by the CDIO founders and interviewed to examine the efficacy of these degree programmes, particularly in this key objective. Graduate employment rates, self assessment of graduate attributes and examples of work produced by MEng graduates provided positive evidence that their capabilities met the requirements of the profession. The 24% questionnaire response rate from the 96 graduates to date did not however facilitate statistically significant conclusions to be drawn and particularly not for BEng graduates who were under represented in the response group. While not providing proof of efficacy the investigation did provide a good amount of useful data for consideration as part of a continuous improvement process.