Survival of pathogenic bacteria during mesophilic anaerobic-digestion of animal waste

The survival of pathogenic bacteria was investigated during the operation of a full-scale anaerobic digester which was fed daily and operated at 28-degrees-C. The digester had a mean hydraulic retention time of 24 d. The viable numbers of Escherichia coli, Salmonella typhimurium, Yersinia enterocolitica, Listeria monocytogenes and Campylobacter jejuni were reduced during mesophilic anaerobic digestion. Escherichia coli had the smallest mean viable numbers at each stage of the digestion process. Its mean T90 value was 76-9 d. Yersinia enterocolitica was the least resistant to the anaerobic digester environment; its mean T90 value was 18.2 d. Campylobacter jejuni was the most resistant bacterium; its mean T90 value was 438.6 d. Regression analysis showed that there were no direct relationships between the slurry input and performance of the digester and the decline of pathogen numbers during the 140 d experimental period.

The use of geoscience methods for terrestrial forensic searches

Geoscience methods are increasingly being utilised in criminal, environmental and humanitarian forensic investigations, and the use of such methods is supported by a growing body of experimental and theoretical research. Geoscience search techniques can complement traditional methodologies in the search for buried objects, including clandestine graves, weapons, explosives, drugs, illegal weapons, hazardous waste and vehicles. This paper details recent advances in search and detection methods, with case studies and reviews. Relevant examples are given, together with a generalised workflow for search and suggested detection technique(s) table. Forensic geoscience techniques are continuing to rapidly evolve to assist search investigators to detect hitherto difficult to locate forensic targets.

Confined site construction: An empirical analysis of factors impacting health and safety management

Purpose – The purpose of this paper is to identify, clarify and tabulate the various managerial issues encountered, to aid in the management of the complex health and safety concerns which occur within a confined construction site environment.

Design/methodology/approach – This is achieved through conducting extensive qualitative and qualitative research in the form of case studies, interviews and questionnaire survey.

Findings – The leading managerial issues in the management of health and safety on a confined construction site are found to be: “Difficulty to move materials around site safely”; “Lack of adequate room for the effective handling of materials”; “Difficulty in ensuring site is tidy and all plant and materials are stored safely”; “Close proximity of individuals to operation of large plant and machinery”; and joint fifth “Difficulty in ensuring proper arrangement and collection of waste materials on-site” along with “Difficulty in controlling hazardous materials and equipment on site”.

Practical implications – The resulting implication for practice of these results can be summarised by identifying that with sustained development of urban centres on a global scale, coupled with the increasing complexity of architectural designs, the majority of on-site project management professionals are faced with the onerous task of completing often intricate designs within a limited spatial environment, under strict health and safety parameters.

Originality/value – The subsequent value of the findings are such that just as on-site management professionals successfully identify the various managerial issues highlighted, the successful management of health and safety on a confined construction site is attainable.

Thalidomide for managing cancer cachexia [review paper]

Cancer cachexia is a multidimensional syndrome characterised by wasting, loss of weight, loss of appetite, metabolic alterations, fatigue and reduced performance status. A significant number of patients with advanced cancer develop cachexia before death. There is no identified optimum treatment for cancer cachexia. While the exact mechanism of the action of thalidomide is unclear, it is known to have immunomodulatory and anti-inflammatory properties, which are thought to help reduce the weight loss associated with cachexia. Preliminary studies of thalidomide have demonstrated encouraging results. This review aimed to (1) evaluate the effectiveness of thalidomide, and (2) identify and assess adverse effects from thalidomide for cancer cachexia. Electronic searches were undertaken in CENTRAL, MEDLINE, EMBASE, Web of Science and CINAHL (from inception to April 2011). Reference lists from reviewed articles, trial registers, relevant conference documents and thalidomide manufacturers identified additional literature. This review included randomised controlled trials (RCTs) and non-RCTs. Participants were adults diagnosed with advanced or incurable cancer and weight loss or a clinical diagnosis of cachexia who were administered thalidomide. All titles and abstracts retrieved by electronic searching were downloaded to a reference management database. Duplicates were removed and the remaining citations were read by two review authors and checked for eligibility. Studies that were deemed ineligible for inclusion had clear reasons for exclusion documented. Data were extracted independently by two review authors for all eligible studies. While a meta-analysis was planned for this review, this was not possible due to the small number of studies included and high heterogeneity among them. Thus a narrative synthesis of the findings is presented. The literature search revealed a dearth of large, well conducted trials in this area. This has hindered the review authors' ability to make an informed decision about thalidomide for the management of cancer cachexia. At present, there is insufficient evidence to refute or support the use of thalidomide for the management of cachexia in advanced cancer patients. The review authors cannot confirm or refute previous literature on the use of thalidomide for patients with advanced cancer who have cachexia and there is inadequate evidence to recommend it for clinical practice. Additional, well conducted, large RCTs are needed to test thalidomide both singularly and in combination with other treatment modalities to ascertain its true benefit, if any, for this population. Furthermore, one study (out of the three reviewed) highlighted that thalidomide was poorly tolerated and its use needs to be explored further in light of the frailty of this population

A streamlined life-cycle assessment and decision tool for used tyres recycling

In order to achieve progress towards sustainable resource management, it is essential to evaluate options for the reuse and recycling of secondary raw materials, in order to provide a robust evidence base for decision makers. This paper presents the research undertaken in the development of a web-based decision-support tool (the used tyres resource efficiency tool) to compare three processing routes for used tyres compared to their existing primary alternatives. Primary data on the energy and material flows for the three routes, and their alternatives were collected and analysed. The methodology used was a streamlined life-cycle assessment (sLCA) approach. Processes included were: car tyre baling against aggregate gabions; car tyre retreading against new car tyres; and car tyre shred used in landfill engineering against primary aggregates. The outputs of the assessment, and web-based tool, were estimates of raw materials used, carbon dioxide emissions and costs. The paper discusses the benefits of carrying out a streamlined LCA and using the outputs of this analysis to develop a decision-support tool. The strengths and weakness of this approach are discussed and future research priorities identified which could facilitate the use of life cycle approaches by designers and practitioners.

The legacy of past manuring practices on soil contamination in remote rural areas

This paper demonstrates that there can be a legacy of contamination on former arable land in remote rural areas as a result of past manuring practices. In the first part of the study four farms abandoned in the late 19th to mid-20th century were investigated with samples collected from residual material in domestic hearths, the midden heaps, kailyards (walled garden for vegetables), infields (intensively managed arable land) and outfields (less intensively managed land for cropping or grazing). Consistent sequences in concentration values were found for such elements as Pb, Zn, Cu and P in the order hearth>midden>kailyard>infield>outfield. Such patterns can in part be explained in terms of atmospheric deposition on peat and turf which were subsequently burnt in hearths to result in enhanced elemental concentrations. The ash then was deposited in midden heaps and subsequently on kailyards or infields. In the second part, microanalytical results from St. Kilda are discussed. Enhanced loadings of Pb and Zn were found in the old arable land. The highest levels of Zn were found in small fragments of carbonised and humified material and bone fragments; in contrast Pb tended to be more uniformly distributed. Seabird waste was extensively applied to the arable land and some of the Zn may have accumulated in the soil by this pathway. The retention of Zn in bone is likely to have been very minor given the rarity of bone fragments as evident in thin sections (0.3%); this compares with 6.8% for black carbonised particles which are likely to provide the main storage sites for Zn.

Arsenic levels in the soils and macrophytes of the 'Entremuros' after the Aznalcóllar mine spill

In April 1998, a holding lagoon containing pyrite ore processing waste rich in arsenic, failed and released 5-6 million m(3) of highly polluting sludge and acidic water. Over 2700 ha of the internationally important Doñana National and Natural Parks were contaminated. The area of Natural Park to sustain the greatest impact was known as the Entremuros. This paper presents 0-5 cm soil monitoring data from the Entremuros, from sampling campaigns 6 and 18 months after the disaster; as well as macrophyte root, rhizome and stem data from samples taken 18 months after the spill. Results show a clear, decreasing, north-south arsenic soil pollution trend, both 6 and 18 months after the spill, and suggest a small reduction in total soil arsenic levels occurred over time; although a significant increase in extractable arsenic is also noted. The two macrophytes (Typha dominguensis and Scirpus maritimus) studied herein are not accumulating arsenic in stem parts, however, accumulation of arsenic on iron plaque on the roots of these plants may be occurring. Further work is recommended in order to determine the ecotoxicological significance of this process in relation to the avian food-chains of Doñana, and elsewhere.

The distribution of arsenic in soils affected by the Aznalcóllar mine spill, SW Spain

In April 1998, a holding lagoon containing pyrite ore processing waste, failed and released an estimated 5-6 million m(3) of metal rich sludge and acidic waters into the Rio Guadiamar, SW Spain. Over 2700 ha of the internationally important Doñana National and Natural Parks were contaminated. The sludge component of the waste contained up to 0.6% arsenic. This paper presents an extensive set of 0-5 cm soil analyses results from samples taken 6-8 months after the spill. Data are presented on pseudo-total arsenic levels in these samples, and on arsenic removed by both single batch and sequential extraction techniques. Pseudo-total levels of arsenic in the sludge ranged from 1521 to 3510 mg kg(-1), and a mean 4.4% of this was found to be extractable using 2.5% acetic acid. Soils in the Guadiamar Valley and Entremuros areas (those worst affected by the spill) were found to contain 85.4-782 mg kg(-1) and 7.1-196 mg kg(-1) pseudo-total arsenic, respectively. The mean acetic acid extractable component in these areas was 2.5% and 4.9%, respectively. Background pseudo-total arsenic levels in the soils of the area have been found to be 4.2-13.6 mg kg(-1). Rapid input of acidic waters, and the acidic nature of the sludge itself, may have caused depletion of Mg, Na and K, and to a lesser extent Mn, Ca and PO(4) in the upper 5 cm of the worst affected soils. Sequential extraction results suggest clear As-Fe associations, and possible As-Mn associations within the more soluble phases.

The Doñana ecological disaster:contamination of a world heritage estuarine marsh ecosystem with acidified pyrite mine waste

One of the most important bird breeding and over wintering sites in the west of Europe, the Coto Doñana, was severely impacted by the release of 5 million cubic meters of acid waste from the processing of pyrite ore. The waste entered ecologically sensitive areas of the park (including breeding areas for internationally endangered bird species) causing sustained pH decreases from pH 8.5 to 4.5 and resulting in massive metal contamination of the impacted ecosystem. The contaminating sludge waste contained arsenic at 0.6%, lead at 1.2% and zinc at 0.8% on a dry weight basis. The acid conditions facilitated the solubilization of these metals, leading to water concentrations lethal for aquatic wildlife. The accident caused considerable fish and invertebrate kills and has severe consequences for the protected bird species dependent on the impacted habitats and adjacent areas.

Digital Methods for Process Development in Manufacturing and Their Relevance to Value Driven Design

This paper examines the applicability of a digital manufacturing framework to the implementation of a Value Driven Design (VDD) approach for the development of a stiffened composite panel. It presents a means by which environmental considerations can be integrated with conventional product and process design drivers within a customized, digital environment. A composite forming process is used as an exemplar for the work which creates a collaborative environment for the integration of more traditional design drivers with parameters related to manufacturability as well as more sustainable processes and products. The environmental stakeholder is introduced to the VDD process through a customized product/process/resource (PPR) environment where application specific power consumption and material waste data has been measured and characterised in the process design interface. This allows the manufacturing planner to consider power consumption as a concurrent design driver and the inclusion of energy as a parameter in a VDD approach to the development of efficiently manufactured, sustainable transport systems.