Two-dimensional images of dissolved sulfide and metals in anoxic sediments by a novel diffusive gradients in thin film probe and optical scanning techniques

A novel diffusive gradients in thin film probe developed comprises diffusive gel layer of silver iodide (AgI) and a back-up Microchelex resin gel layer. 2D high-resolution images of sulfide and trace metals were determined respectively on the AgI gel by densitometric analysis and on the Microchelex resin layer with laser-ablation-inductively-coupled plasma mass spectrometry (LA-ICP-MS).We investigated the validity of the analytical procedures used for the determination of sulfide and trace metals. We found low relative standard deviations on replicate measurements, linear trace-metal calibration curves between the LA-ICP-MS signal and the true trace-metal concentration in the resin gel, and a good agreement of the sulfide results obtained with the AgI resin gel and with other analytical methods. The method was applied on anoxic sediment pore waters in an estuarine and marine system. Simultaneous remobilization of sulfide and trace metals was observed in the marine sediment.

Rapid design of discrete orthonormal wavelet transforms using silicon IP components

A rapid design methodology for orthonormal wavelet transform cores has been developed. This methodology is based on a generic, scaleable architecture utilising time-interleaved coefficients for the wavelet transform filters. The architecture has been captured in VHDL and parameterised in terms of wavelet family, wavelet type, data word length and coefficient word length. The control circuit is embedded within the cores and allows them to be cascaded without any interface glue logic for any desired level of decomposition. Case studies for stand alone and cascaded silicon cores for single and multi-stage wavelet analysis respectively are reported. The design time to produce silicon layout of a wavelet based system has been reduced to typically less than a day. The cores are comparable in area and performance to handcrafted designs. The designs are portable across a range of foundries and are also applicable to FPGA and PLD implementations.

Different frequencies of acupuncture for treatment for chronic low back pain: an-assessor blinded pilot randomised controlled trial.

OBJECTIVES:
To examine the feasibility of a main RCT to compare the effectiveness of two frequencies (2 versus 5 times/week) of acupuncture treatment for chronic low back pain (LBP).
METHODS:
Participants (n=30) with chronic LBP were randomised into two groups to receive 10 acupuncture treatments: Low Frequency Group, 2 times/week for five weeks (n=15); High Frequency Group, 5 times/week for two weeks (n=15). The following outcomes were measured blindly at baseline, 2 weeks, 5 weeks, 3 months and 1 year: pain on a VAS, functional disability using the RMDQ, quality of life using the Measure Yourself Medical Outcome Profile (MYMOP-2), psychological impact with the Coping Strategies Questionnaire (CSQ) and Pain Locus of Control (PLC) questionnaire. Two objective outcomes, the Shuttle Walk Test (SWT) and Lateral Trunk Flexibility (LTF), were also measured.
RESULTS:
The compliance rate was 100% for each group. Some of the measurements were shown to be sensitive (VAS, RMDQ, MYMOP-2 Wellbeing). 66-330 participants would be required for a fully powered non-inferiority trial. The groups were balanced at baseline for LBP and demographic characteristics. There were no significant differences between the groups in terms of any of the outcomes, at each follow-up time point. It was notable however that the clinically important improvement in terms of pain, functional disability, quality of life, and SWT in both groups was achieved within the first two weeks, which was maintained at one year follow-up.
CONCLUSIONS:
It is feasible to conduct a main RCT, to compare different frequencies of acupuncture for LBP, using sensitive measurements. Also the trend for early clinically important improvement within a minimum of four measurements is worthy of further study.

An Improvement of IP Address Lookup based on Rule Filter Analysis

Multi-bit trie is a popular approach performing the longest prefix matching for packet classification. However, it requires a long lookup time and inefficiently consumes memory space. This paper presents an in-depth study of different variations of multi-bit trie for IP address lookup. Our main aim is to study a method of data structure which reduces memory space. The proposed approach has been implemented using the label method in two approaches. Both methods present better results regarding lookup speed, update time and memory bit consumptions.

Supervised walking in comparison with fitness training for chronic back pain in physiotherapy: results of the SWIFT single-blinded randomized controlled trial (ISRCTN17592092)

Effectiveness of brief/minimal contact self-activation interventions that encourage participation in physical activity (PA) for chronic low back pain (CLBP >12 weeks) is unproven. The primary objective of this assessor-blinded randomized controlled trial was to investigate the difference between an individualized walking programme (WP), group exercise class (EC), and usual physiotherapy (UP, control) in mean change in functional disability at 6 months. A sample of 246 participants with CLBP aged 18 to 65 years (79 men and 167 women; mean age ± SD: 45.4 ± 11.4 years) were recruited from 5 outpatient physiotherapy departments in Dublin, Ireland. Consenting participants completed self-report measures of functional disability, pain, quality of life, psychosocial beliefs, and PA were randomly allocated to the WP (n = 82), EC (n = 83), or UP (n = 81) and followed up at 3 (81%; n = 200), 6 (80.1%; n = 197), and 12 months (76.4%; n = 188). Cost diaries were completed at all follow-ups. An intention-to-treat analysis using a mixed between-within repeated-measures analysis of covariance found significant improvements over time on the Oswestry Disability Index (Primary Outcome), the Numerical Rating Scale, Fear Avoidance-PA scale, and the EuroQol EQ-5D-3L Weighted Health Index (P < 0.05), but no significant between-group differences and small between-group effect sizes (WP: mean difference at 6 months, 6.89 Oswestry Disability Index points, 95% confidence interval [CI] -3.64 to -10.15; EC: -5.91, CI: -2.68 to -9.15; UP: -5.09, CI: -1.93 to -8.24). The WP had the lowest mean costs and the highest level of adherence. Supervised walking provides an effective alternative to current forms of CLBP management.

Laboratizing the border: The production, translation and anticipation of security technologies

This paper critically interrogates how borders are produced by scientists, engineers and security experts in advance of the actual deployment of technical devices they develop. This paper explores the prior stages of translation and decision-making as a socio-technical device is conceived and developed. Drawing on in-depth interviews, observations and ethnographic research of the EU-funded Handhold project (consisting of nine teams in five countries), it explores how assumptions about the way security technologies will and should perform at the border shape the way that scientists, engineers, and security experts develop a portable, integrated device to detect CBRNE threats at borders. In disaggregating the moments of sovereign decision making across multiple sites and times, this paper questions the supposed linearity of how science comes out of and feeds back into the world of border security. An interrogation of competing assumptions and understandings of security threats and needs, of competing logics of innovation and pragmatism, of the demands of differentiated temporalities in detection and interrogation, and of the presumed capacities, behaviours, and needs of phantasmic competitors and end-users reveals a complex, circulating and co-constitutive process of device development that laboratises the border itself. We trace how sovereign decisions are enacted as assemblages in the antecedent register of device development itself through the everyday decisions of researchers in the laboratory, and the material components of the Handhold device itself.

Levels of Arsenic and Other Trace Elements in Southern Libyan Agricultural Irrigated Soil and Non-irrigated Soil Projects

The levels of As and various other trace elements found in the irrigated agricultural soil (Tsoil) of southern Libya were compared with non-irrigated soil (Csoil) from the same sampling campaign collected between April and May 2008. The soil samples represented agronomic practice in the southern Libyan regions of Maknwessa (MAK), Aril (ARL) and Taswaa (TAS), and were analyzed by Inductively coupled plasma mass spectrometry (ICP-MS) for Co, Ni, Cu, Se, Mo, Zn, As, Pb, Cd and P. Concentrations of P and As in TAS and MAK were found to be higher in Tsoil compared to Csoil, while the opposite was true for ARL. In general, As concentrations in these areas were 2-3 times lower than the global average. In ARL, the average P concentrations of the Csoil samples were significantly higher than those of Tsoil samples: this site is composed mainly of pasture for animal production, where phosphate fertilizers are used regularly. Distance from the source of irrigation was found to be of an important influence on the heavy metal concentration of the soil, with greater concentrations found closer to the irrigation source. It can be concluded from the results that irrigation water contains elevated levels of As, which finds its way into the soil profile and can lead to accumulation of As in the soil over time.