Thermal conductivities of ionic liquids over the temperature range from 293 K to 353 K

The thermal conductivities of 11 ionic liquids were determined, over the temperature range from 293 K to 353 K, at atmospheric pressure, using an apparatus based on the transient hot-wire method. For each of the ionic liquids studied, the thermal conductivities were found to be between (0.1 and 0.2) W.m(-1).K-1, with a slight decrease observed on increasing temperature. The uncertainty is estimated to be less than +/- 0.002 W.m(-1).K-1. In all cases, a linear equation was found to give a good fit to the data. The effects of water content and chloride content on the thermal conductivities of some of the ionic liquids were investigated. In each case, the thermal conductivities of the water + ionic liquid and chloride + ionic liquid binary mixtures were found to be less than the weighted average of the pure component thermal conductivities. This effect was adequately modeled using the Jamieson correlation. Chloride contamination at typical postsynthesis levels was found to have no significant effect on the thermal conductivities of the ionic liquid studied.

Thomson spectrometer-microchannel plate assembly calibration for MeV-range positive and negative ions, and neutral atoms

We report on the absolute calibration of a microchannel plate (MCP) detector, used in conjunction with a Thomson parabola spectrometer. The calibration delivers the relation between a registered count numbers in the CCD camera (on which the MCP phosphor screen is imaged) and the number of ions incident on MCP. The particle response of the MCP is evaluated for positive, negative, and neutral particles at energies below 1 MeV. As the response of MCP depends on the energy and the species of the ions, the calibration is fundamental for the correct interpretation of the experimental results. The calibration method and arrangement exploits the unique emission symmetry of a specific source of fast ions and atoms driven by a high power laser.

SiGe V Band Wide Tuning-Range VCO and Frequency Divider for Phase Locked Loop

A V-band wide tuning-range VCO and high frequency divide-by-8 frequency divider using Infineon 0.35 µm SiGe HBT process are presented in this paper. An LC impedance peaking technique is introduced in the Miller divider to increase the sensitivity and operation frequency range of the frequency divider. Two static frequency dividers implemented using current mode logic are used to realize dividing by 4 in the circuit. The wide tuning range VCO operates from 51.9 to 64.1 GHz i.e. 20.3% frequency tuning range. The measured phase noise at the frequency divider output stage is around -98.5 dBc at 1 MHz. The circuit consumes 200mW and operates from a 3.5Vdc supply, and occupies 0.6×0.8 mm2 die area.

Physical activity and the rejuvenation of Connswater (PARC study): protocol for a natural experiment investigating the impact of urban regeneration on public health

Background: There is a dearth of evidence regarding the impact of urban regeneration projects on public health, particularly the nature and degree to which urban regeneration impacts upon health-related behaviour change. Natural experiment methodology enables comprehensive large-scale evaluations of such interventions. The Connswater Community Greenway in Belfast is a major urban regeneration project involving the development of a 9 km linear park, including the provision of new cycle paths and walkways. In addition to the environmental improvements, this complex intervention involves a number of programmes to promote physical activity in the regenerated area. The project affords a unique opportunity to investigate the public health impact of urban regeneration.

Methods/Design: The evaluation framework was informed by the socio-ecological model and guided by the RE-AIM Framework. Key components include: (1) a quasi-experimental before-and-after survey of the Greenway population (repeated cross-sectional design), in tandem with data from a parallel Northern Ireland-wide survey for comparison; (2) an assessment of changes in the local built environment and of walkability using geographic information systems; (3) semi-structured interviews with a purposive sample of survey respondents, and a range of community stakeholders, before and after the regeneration project; and (4) a cost-effectiveness analysis. The primary outcome is change in proportion of individuals identified as being regularly physically active, according to the current UK recommendations. The RE-AIM Framework will be used to make an overall assessment of the impact of the Greenway on the physical activity behaviour of local residents.

Discussion: The Connswater Community Greenway provides a significant opportunity to achieve long-term, population level behaviour change. We argue that urban regeneration may be conceptualised meaningfully as a complex intervention comprising multiple components with the potential, individually and interactively, to affect the behaviour of a diverse population. The development and implementation of our comprehensive evaluation framework reflects this complexity and illuminates an approach to the empirical, rigorous evaluation of urban regeneration. More specifically, this study will add to the much needed evidence-base about the impact of urban regeneration on public health as well as having important implications for the development of natural experiment methodology.

Long-Range Lateral Dopant Diffusion in Tungsten Silicide Layers

Novel diode test structures have been manufactured to characterize long-range dopant diffusion in tungsten silicide layers. A tungsten silicide to p-type silicon contact has been characterized as a Schottky barrier rectifying contact with a silicide work function of 4.8 eV. Long-range diffusion of boron for an anneal at 900 °C for 30 min has been shown to alter this contact to become ohmic. Long-range diffusion of phosphorus with a similar anneal alters the contact to become a bipolar n-p diode. Bipolar diode action is demonstrated experimentally for anneal schedules of 30 min at 900 °C, indicating long-range diffusion of phosphorus (~38 µm), SIMS analysis shows dopant redistribution is adversely affected by segregation to the silicide/oxide interface. The concept of conduit diffusion has been demonstrated experimentally for application in advanced bipolar transistor technology. © 2009 IEEE.

Fluorescence based fibre optic pH sensor for the pH 10–13 range suitable for corrosion monitoring in concrete structures

The design, development and evaluation of an optical fibre pH sensor for monitoring pH in the alkaline region are discussed in detail in this paper. The design of this specific pH sensor is based on the pH induced change in fluorescence intensity of a coumarin imidazole dye which is covalently attached to a polymer network and then fixed to the distal end of an optical fibre. The sensor provides a response over a pH range of 10.0–13.2 with an acceptable response rate of around 50 min, having shown a very good stability over a period of longer than 20 months thus far. The sensor has also demonstrated little cross-sensitivity to ionic strength (IS) and also excellent photostability through a series of laboratory tests. These features make this type of sensor potentially well suited for in situ long term monitoring of pH in concrete structures, to enhance structural monitoring in the civil engineering sector

Health status and 6 years survival of 552 90+ Italian sib-ships recruited within the EU Project GEHA (GEnetics of Healthy Ageing).

In a scenario of increasing life expectancy worldwide, it is mandatory to identify the characteristics of a healthy aging phenotype, including survival predictors, and to disentangle those related to environment/lifestyle versus those related to familiarity/genetics. To this aim we comprehensively characterised a cohort of 1,160 Italian subjects of 90 years and over (90+, mean age 93 years; age range 90-106 years) followed for 6 years survival, belonging to 552 sib-ships (familiar longevity) recruited (2005-2008) within the EU-funded GEHA project in three Italian geographic areas (Northern, Central and Southern Italy) different for urban/rural and socio-economical characteristics. On the whole, the following factors emerged as significant predictors of survival after 90 years of age: absence of cognitive impairment and physical disability, high hand grip strength scores and body mass index (BMI) values, "excellent/good" self-reported health, high haemoglobin and total cholesterol levels and low creatinine levels. These parameters, excluding BMI values, were also significantly associated within sib-ships, suggesting a strong familial/genetic component. Geographical micro-heterogeneity of survival predictors emerged, such as functional and physical status being more important in Southern than in Central and Northern Italy. In conclusion, we identified modifiable survival predictors related to specific domains, whose role and importance vary according to the geographic area considered and which can help in interpreting the genetic results obtained by the GEHA project, whose major aim is the comprehensive evaluation of phenotypic and genetic data.

Criticality, factorization, and long-range correlations in the anisotropic XY model

We study the long-range quantum correlations in the anisotropic XY model. By first examining the thermodynamic limit, we show that employing the quantum discord as a figure of merit allows one to capture the main features of the model at zero temperature. Furthermore, by considering suitably large site separations we find that these correlations obey a simple scaling behavior for finite temperatures, allowing for efficient estimation of the critical point. We also address ground-state factorization of this model by explicitly considering finite-size systems, showing its relation to the energy spectrum and explaining the persistence of the phenomenon at finite temperatures. Finally, we compute the fidelity between finite and infinite systems in order to show that remarkably small system sizes can closely approximate the thermodynamic limit.

The impact of peer review on the radiotherapy treatment planning process in the treatment of lung cancer

Background:
Advanced radiotherapy techniques permit accurate delivery of radiotherapy to lung tumours. Improved accuracy increases the possibility of radiotherapy field geographic miss of the tumour. One source of error is the accuracy of target volume (TV) delineation by the clinical oncologist. Colleague peer review of all curative intent lung cancer plans has been mandatory in our institution since May 2013. At least 2 clinical oncologists review plans checking treatment paradigm, TV delineated, dose to tumour and dose to critical organs. We report the impact of peer review on the radiotherapy planning process for lung cancer.

Methods:
The radiotherapy treatment plans of all patients receiving radical radiotherapy were presented at weekly peer review meetings after their TVs volumes were provisionally signed off by the treating consultant or post-fellowship registrar. All cases and any resultant change to the treatment plan were recorded in our prospective peer review database. We present the summary of changes agreed following the peer review process for a 6 month period.

Results:
Fifteen peer review sessions, including 46 patients (36 NSCLC, 10 SCLC) were analysed. An average of 3 cases were discussed per meeting (range 1 5). 24% of treatment courses were changed. In 4% there was a complete change in paradigm
of treatment (1 patient proceeded to induction chemotherapy, 1 patient had high dose palliative radiotherapy). In 16% there was a change in TV delineated and in 9% a change in dose (2 dose reductions and 2 alterations to post-operative dose fractionations).

Conclusions:
Consultant led peer review resulted in a change in a component of the treatment plan for 28% of patients that would not otherwise have taken place. Given this impact, consultant led peer review should be considered as an essential component in the radiotherapy planning process for all patients treated with curative radiotherapy.

Planning, Devolution and the Territorialisation of Wind Energy in the UK

The decarbonisation of energy systems draw a new set of stakeholders into debates over energy generation, engage a complex set of social, political, economic and environmental processes and impact at a wide range of geographical scales, including local landscape changes, national energy markets and regional infrastructure investment. This paper focusses on a particular geographic scale, that of the regions/nations of the UK (Scotland, Wales, Northern Ireland), who have been operating under devolved arrangements since the late 1990s, coinciding with the mass deployment of wind energy. The devolved administrations of the UK possess an asymmetrical set of competencies over energy policy, yet also host the majority of the UK wind resource. This context provides a useful way to consider the different ways in which geographies of "territory" are reflected in energy governance, such through techno-rational assessments of demand or infrastructure investment, but also through new spatially-defined institutions that seek to develop their own energy future, using limited regulatory competencies. By focussing on the way the devolved administrations have used their responsibilities for planning over the last decade this paper will assess the way in which the spatial politics of wind energy is giving rise to renewed forms of territorialisation of natural resources. In so doing, we aim to contribute to clarifying the questions raised by Hodson and Marvin (2013) on whether low carbon futures will reinforce or challenge dominant ways of organising relationships between the nation-state, regions, energy systems and the environment.

Our Construct or Theirs?

Identity is relational and a construct, and is expressed in a myriad of ways. For example, material culture and its pluralist meanings have been readily manipulated by humans in a prehistoric context in order to construct personal and group identities. Artefacts were often from or reminiscent of far-flung places and were used to demonstrate membership of an (imagined) regional, or European community. Earthworks frequently archive maximum visual impact through elaborate ramparts and entrances with the minimum amount of effort, indicating that the construction of identities were as much in the eye of the perceivor, as of the perceived. Variations in domestic architectural style also demonstrate the malleability of identity, and the prolonged, intermittent use of particular places for specific functions indicates that the identity of place is just as important in our archaeological understanding as the identity of people. By using a wide range of case studies, both temporally and spatially, these thought processes may be explored further and diachronic and geographic patterns in expressions of identity investigated.

Clinical Characteristics of Reticular Pseudodrusen in the Fellow Eye of Patients with Unilateral Neovascular Age-Related Macular Degeneration

Purpose: To describe associations between reticular pseudodrusen, individual characteristics, and retinal function.

Design: Cohort study.

Participants: We recruited 105 patients (age range, 52–93 years) who had advanced neovascular age-related macular degeneration (AMD) in only 1 eye from 3 clinical centers in Europe.

Methods: Minimum follow-up was 12 months. The eye selected for study was the fellow eye without advanced disease. Clinical measures of vision were distance visual acuity, near visual acuity, and results of the Smith-Kettlewell low-luminance acuity test (SKILL). Fundus imaging included color photography, red-free imaging, blue autofluorescence imaging, fluorescein angiography, indocyanine green angiography, and optical coherence tomography using standardized protocols. These were used to detect progression to neovascular AMD in the study eye during follow-up. All imaging outputs were graded for the presence or absence of reticular pseudodrusen (RPD) using a multimodal approach. Choroidal thickness was measured at the foveal center and at 2 other equidistant locations from the fovea (1500 μm) nasally and temporally. Metrics on retinal thickness and volume were obtained from the manufacturer-supplied automated segmentation readouts.

Main Outcome Measures: Presence of RPD, distance visual acuity, near visual acuity, SKILL score, choroidal thickness, retinal thickness, and retinal volume.

Results: Reticular pseudodrusen was found in 43 participants (41%) on 1 or more imaging method. The SKILL score was significantly worse in those with reticular drusen (mean score ± standard deviation [SD, 38±12) versus those without (mean score ± SD, 33±9) (P = 0.034). Parafoveal retinal thickness, parafoveal retinal volume, and all of the choroidal thickness parameters measured were significantly lower in those with reticular drusen than in those without. The presence of RPD was associated with development of neovascular AMD when corrected for age and sex (odds ratio, 5.5; 95% confidence interval, 1.1–28.8; P = 0.042). All participants in whom geographic atrophy developed during follow-up had visible RPD at baseline.

Conclusions: Significant differences in retinal and choroidal anatomic features, visual function, and risk factor profile exist in unilateral neovascular AMD patients with RPD compared with those without; therefore, such patients should be monitored carefully because of the risk of developing bilateral disease.

Reconfigurable Long-Range Phonon Dynamics in Optomechanical Arrays

We investigate periodic optomechanical arrays as reconfigurable platforms for engineering the coupling between multiple mechanical and electromagnetic modes and for exploring many-body phonon dynamics. Exploiting structural resonances in the coupling between light fields and collective motional modes of the array, we show that tunable effective long-range interactions between mechanical modes can be achieved. This paves the way towards the implementation of controlled phononic walks and heat transfer on densely connected graphs as well as the coherent transfer of excitations between distant elements of optomechanical arrays.