167 resultados para Video Surveillance
Resumo:
This paper presents an evaluation of the use of videoconferencing in learning and teaching in a United Kingdom higher education institution involved in initial teacher education. Students had the opportunity to observe naturalistic teaching practices without physically being present in the classroom. The study consisted of semi-structured interviews with the co-ordinator of the link, the head of ICT services in Stranmillis University College and the teacher of the classroom being observed. Students were invited to complete an online questionnaire. The views of the students, the co-ordinator of the link, the teacher of the classroom being observed and the head of ICT services in Stranmillis University College were then triangulated to gain an overall view of the effectiveness of the videoconferencing link. Interviews suggested students benefited in terms of pedagogy. In the early stages of the project, the teacher thought it acted as a form of classroom control. Technical problems were encountered initially and camera control was modified in the light of these. The online questionnaire suggested that students viewed this experience in a positive way and were impressed with the content, technical quality, and potential benefits of the use of this example of new technologies.
Resumo:
There has always been a question mark over how best to integrate developing countries into the world trading system and traditionally the WTO has used special and differential treatment (S&D) to do so. However, since 1996 the WTO has been involved with the Aid for Trade (AfT) initiative typically co-ordinated by the OECD and UN. This article firstly outlines the background to AfT since 1996 under the numerous agencies working in the area, highlighting how importance has always been placed on the monitoring and effectiveness of the process. It then turns to assessing the various methods currently used and the proposal of the WTO’s Trade Policy Review Mechanism (TPRM) as a potential monitoring tool of AfT.
Resumo:
In this paper, we introduce an efficient method for particle selection in tracking objects in complex scenes. Firstly, we improve the proposal distribution function of the tracking algorithm, including current observation, reducing the cost of evaluating particles with a very low likelihood. In addition, we use a partitioned sampling approach to decompose the dynamic state in several stages. It enables to deal with high-dimensional states without an excessive computational cost. To represent the color distribution, the appearance of the tracked object is modelled by sampled pixels. Based on this representation, the probability of any observation is estimated using non-parametric techniques in color space. As a result, we obtain a Probability color Density Image (PDI) where each pixel points its membership to the target color model. In this way, the evaluation of all particles is accelerated by computing the likelihood p(z|x) using the Integral Image of the PDI.
Resumo:
Passive equipments operating in the 30-300 GHZ (millimeter wave) band are compared to those in the 300 GHz-3 THz (submillimeter band). Equipments operating in the submillimeter band can measure distance and also spectral information and have been used to address new opportunities in security. Solid state spectral information is available in the submillimeter region making it possible to identify materials, whereas in millimeter region bulk optical properties determine the image contrast. The optical properties in the region from 30 GHz to 3 THz are discussed for some typical inorganic and organic solids. in the millimeter-wave region of the spectrum, obscurants such as poor weather, dust, and smoke can be penetrated and useful imagery generated for surveillance. in the 30 GHZ-3 THZ region dielectrics such as plastic and cloth are also transparent and the detection of contraband hidden under clothing is possible. A passive millimeter-wave imaging concept based on a folded Schmidt camera has been developed and applied to poor weather navigation and security. The optical design uses a rotating mirror and is folded using polarization techniques. The design is very well corrected over a wide field of view making it ideal for surveillance, and security. This produces a relatively compact imager which minimizes the receiver count.
The incidence of adenocarcinoma in Barrett's oesophagus and an evaluation of endoscopic surveillance
Resumo:
Details of a new low power fast Fourier transform (FFT) processor for use in digital television applications are presented. This has been fabricated using a 0.6-µm CMOS technology and can perform a 64 point complex forward or inverse FFT on real-time video at up to 18 Megasamples per second. It comprises 0.5 million transistors in a die area of 7.8 × 8 mm and dissipates 1 W. The chip design is based on a novel VLSI architecture which has been derived from a first principles factorization of the discrete Fourier transform (DFT) matrix and tailored to a direct silicon implementation.
Resumo:
In this paper, a new reconfigurable multi-standard architecture is introduced for integer-pixel motion estimation and a standard-cell based chip design study is presented. This has been designed to cover most of the common block-based video compression standards, including MPEG-2, MPEG-4, H.263, H.264, AVS and WMV-9. The architecture exhibits simpler control, high throughput and relative low hardware cost and highly competitive when compared with excising designs for specific video standards. It can also, through the use of control signals, be dynamically reconfigured at run-time to accommodate different system constraint such as the trade-off in power dissipation and video-quality. The computational rates achieved make the circuit suitable for high end video processing applications. Silicon design studies indicate that circuits based on this approach incur only a relatively small penalty in terms of power dissipation and silicon area when compared with implementations for specific standards.
Resumo:
This paper describes how worst-case error analysis can be applied to solve some of the practical issues in the development and implementation of a low power, high performance radix-4 FFT chip for digital video applications. The chip has been fabricated using a 0.6 µm CMOS technology and can perform a 64 point complex forward or inverse FFT on real-time video at up to 18 Megasamples per second. It comprises 0.5 million transistors in a die area of 7.8×8 mm and dissipates 1 W, leading to a cost-effective silicon solution for high quality video processing applications. The analysis focuses on the effect that different radix-4 architectural configurations and finite wordlengths has on the FFT output dynamic range. These issues are addressed using both mathematical error models and through extensive simulation.
Resumo:
Objective: The aim of this paper is to bridge the gap between the corpus of imitation research and video-based intervention (VBI) research, and consider the impact imitation skills may be having on VBI outcomes and highlight potential areas for improving efficacy.
Method: A review of the imitation literature was conducted focusing on imitation skill deficits in children with autism followed by a critical review of the video modelling literature focusing on pre-intervention assessment of imitation skills and the impact imitation deficits may have on VBI outcomes.
Results: Children with autism have specific imitation deficits, which may impact VBI outcomes. Imitation training or procedural modifications made to videos may accommodate for these deficits.
Conclusions: There are only six studies where VBI researchers have taken pre-intervention imitation assessments using an assortment of imitation measures. More research is required to develop a standardised multi-dimensional imitation assessment battery that can better inform VBI.
Resumo:
This paper presents the maximum weighted stream posterior (MWSP) model as a robust and efficient stream integration method for audio-visual speech recognition in environments, where the audio or video streams may be subjected to unknown and time-varying corruption. A significant advantage of MWSP is that it does not require any specific measurements of the signal in either stream to calculate appropriate stream weights during recognition, and as such it is modality-independent. This also means that MWSP complements and can be used alongside many of the other approaches that have been proposed in the literature for this problem. For evaluation we used the large XM2VTS database for speaker-independent audio-visual speech recognition. The extensive tests include both clean and corrupted utterances with corruption added in either/both the video and audio streams using a variety of types (e.g., MPEG-4 video compression) and levels of noise. The experiments show that this approach gives excellent performance in comparison to another well-known dynamic stream weighting approach and also compared to any fixed-weighted integration approach in both clean conditions or when noise is added to either stream. Furthermore, our experiments show that the MWSP approach dynamically selects suitable integration weights on a frame-by-frame basis according to the level of noise in the streams and also according to the naturally fluctuating relative reliability of the modalities even in clean conditions. The MWSP approach is shown to maintain robust recognition performance in all tested conditions, while requiring no prior knowledge about the type or level of noise.
Resumo:
Mixture of Gaussians (MoG) modelling [13] is a popular approach to background subtraction in video sequences. Although the algorithm shows good empirical performance, it lacks theoretical justification. In this paper, we give a justification for it from an online stochastic expectation maximization (EM) viewpoint and extend it to a general framework of regularized online classification EM for MoG with guaranteed convergence. By choosing a special regularization function, l1 norm, we derived a new set of updating equations for l1 regularized online MoG. It is shown empirically that l1 regularized online MoG converge faster than the original online MoG .