F. E.-assisted design of the eaves bracket of a cold-formed steel portal frame

Non-linear large-displacement elasto-plastic finite element analyses are used to propose design recommendations for the eaves bracket of a cold-formed steel portal frame. Owing to the thinness of the sheet steel used for the brackets, such a structural design problem is not trivial as the brackets need to be designed against failure through buckling; without availability of the finite element method, expensive laboratory testing would therefore be required. In this paper, the finite element method is firstly used to predict the plastic moment capacity of the eaves bracket. Parametric studies are then used to propose design recommendations for the eaves bracket against two potential buckling modes of failure:

Measuring positron-atom binding energies through laser-assisted photorecombination

Described here is a proposed experiment to use laser-assisted photorecombination of positrons from a trap-based beam and metal atoms in the gas phase to measure positron-atom binding energies. Signal rates are estimated, based in part upon experience studying resonant annihilation spectra using a trapbased positron beam. © IOP Publishing Ltd and Deutsche Physikalische Gesellschaft.

Microwave-assisted Cu-catalyzed Ullmann ether synthesis in a continuous-flow milli-plant

The combination of milli-scale processing and microwave heating has been investigated for the Cu-catalyzed Ullmann etherification in fine-chemical synthesis, providing improved catalytic activity and selective catalyst heating. Wall-coated and fixed-bed milli-reactors were designed and applied in the Cu-catalyzed Ullmann-type CO coupling of phenol and 4-chloropyridine. In a batch reactor the results show clearly increased yields for the microwave heated process at low microwave powers, whereas high powers and catalyst loadings reduced the benefits of microwave heating. Slightly higher yields were found in the Cu/ZnO wall-coated as compared to the Cu/TiO fixed-bed flow-reactor. The benefit here is that the reaction occurs at the surface of the metal nanoparticles confined within a support film making the nano-copper equally accessible. Catalyst deactivation was mainly caused by Cu oxidation and coke formation; however, at longer process times leaching played a significant role. Catalyst activity could partially be recovered by removal of deposited by-product by means of calcination. After 6h on-stream the reactor productivities were 28.3 and 55.1kgprod/(mR3h) for the fresh Cu/ZnO wall-coated and Cu/TiO fixed-bed reactor, respectively. Comparison of single- and multimode microwaves showed a threefold yield increase for single-mode microwaves. Control of nanoparticles size and loading allows to avoid high temperatures in a single-mode microwave field and provides a novel solution to a major problem for combining metal catalysis and microwave heating. Catalyst stability appeared to be more important and provided twofold yield increase for the CuZn/TiO catalyst as compared to the Cu/TiO catalyst due to stabilized copper by preferential oxidation of the zinc. For this catalyst a threefold yield increase was observed in single-mode microwaves which, to the best of our knowledge, led to a not yet reported productivity of 172kgprod/(mR3h) for the microwave and flow Ullmann CO coupling. © 2012 Elsevier B.V.

A more direct way to make catalysts: one-pot ligand-assisted aerobic stripping and electrodeposition of copper on graphite

Electrodeposition of metals onto conductive supports such as graphite potentially provides a lower-waste method to form heterogeneous catalysts than the standard methods such as wet impregnation. Copper electrodeposition onto pressed graphite disc electrodes was investigated from aqueous CuSO4-ethylenediamine solutions by chronoamperometry with scanning electron microscopy used to ascertain the particle sizes obtained by this method. The particle size was studied as a function of pH, CuSO4-ethylenediamine concentration, and electrodeposition time. It was observed that decreasing the pH, copper-ethylenediamine concentration and time each decreased the size of the copper particles observed, with the smallest obtained being around 5-20 nm. Furthermore, electroless aerobic oxidation of copper metal in the presence of ethylenediamine was successfully coupled with the electrodeposition in the same vessel. In this way, deposition was achieved sequentially on up to twenty different graphite discs using the same ethylenediamine solution, demonstrating the recyclability of the ligand. The materials thus prepared were shown to be catalytically active for the mineralisation of phenol by hydrogen peroxide. Overall, the results provide a proof-of-principle that by making use of aerobic oxidation coupled with electrochemical deposition, elemental base metals can be used directly as starting materials to form heterogeneous catalysts without the need to use metal salts as catalyst precursors.

Web-assisted first-year undergraduate teaching in engineering

A software system, recently developed by the authors for the efficient capturing, editing, and delivery of audio-visual web lectures, was used to create a series of lectures for a first-year undergraduate course in Dynamics. These web lectures were developed to serve as an extra study resource for students attending lectures and not as a replacement. A questionnaire was produced to obtain feedback from students. The overall response was very favorable and numerous requests were made for other lecturers to adopt this technology. Despite the students' approval of this added resource, there was no significant improvement in overall examination performance

Responding to desire to die statements from patients with advanced disease:recommendations for health professionals

It is not uncommon for patients with advanced incurable disease to express a desire to hasten their death. Health professionals often have difficulty responding to such statements, and find it challenging to ascertain why these statements are made. Health professionals may struggle to determine whether a 'desire to die' statement (DTDS) is about a request for hastened death, a sign of psychosocial distress, or merely a passing comment that is not intended to be heard literally as a death wish. Given the lack of guidelines to assist health professionals with this issue, we have prepared multidisciplinary recommendations for responding to a DTDS, underpinned by key principles of therapeutic communication and a systematic review of empirical literature. Where the relevant literature was lacking, the recommendations were drafted by the authors (clinicians and/ or academics from the following disciplines: nursing, medicine, psychiatry, psychology, sociology, aged care and theology), based on their expert opinion. Multiple drafts of the recommendations were circulated to the authors for refinement until consensus was reached. Strategies for advancing the evidence base for the maturation of guidelines in this area are offered.

Desire for hastened death in patients with advanced disease and the evidence base of clinical guidelines:a systematic review

Patients' desire for hastened death within the context of advanced disease and palliative care is a controversial topic, frequently discussed in the international literature. Much of the discussion has focused on opinion and debate about ethical matters related to hastened death. Not many research studies seem to have specifically targeted why palliative care patients may desire hastened death, and few have focused on clinical guidelines for responding to such requests.

The impact of sperm DNA damage in assisted conception and beyond: recent advances in diagnosis and treatment

Abstract Sperm DNA damage is a useful biomarker for male infertility diagnosis and prediction of assisted reproduction outcomes.
It is associated with reduced fertilization rates, embryo quality and pregnancy rates, and higher rates of spontaneous miscarriage
and childhood diseases. This review provides a synopsis of the most recent studies from each of the authors, all of whom have major
track records in the field of sperm DNA damage in the clinical setting. It explores current laboratory tests and the accumulating body
of knowledge concerning the relationship between sperm DNA damage and clinical outcomes. The paper proceeds to discuss the
strengths, weaknesses and clinical applicability of current sperm DNA tests. Next, the biological significance of DNA damage in
the male germ line is considered. Finally, as sperm DNA damage is often the result of oxidative stress in the male reproductive tract,
the potential contribution of antioxidant therapy in the clinical management of this condition is discussed. DNA damage in human spermatozoa is an important attribute of semen quality. It should be part of the clinical work up and properly controlled trials
addressing the effectiveness of antioxidant therapy should be undertaken as a matter of urgency.

Qubit-assisted thermometry of a quantum harmonic oscillator

We use the theory of quantum estimation in two different qubit-boson coupling models to demonstrate that the temperature of a quantum harmonic oscillator can be estimated with high precision by quantum-limited measurements on the qubit. The two models that we address embody situations of current physical interest due to their connection with ongoing experimental efforts on the control of mesoscopic dynamics. We show that population measurements performed over the qubit probe are near optimal for a broad range of temperatures of the harmonic oscillator.

Religion and the risk of suicide: longitudinal study of over 1 million people

Background: Durkheim’s seminal historical study demonstrated that religious affiliation reduces suicide risk, but it is unclear whether this protective effect persists in modern, more secular societies.

Aims: To examine suicide risk according to Christian religious affiliation and by inference to examine underlying mechanisms for suicide risk. If church attendance is important, risk should be lowest for Roman Catholics and highest for those with no religion; if religiosity is important, then ‘conservative’ Christians should fare best.

Method: A 9-year study followed 1 106 104 people aged 16–74 years at the 2001 UK census, using Cox proportional hazards models adjusted for census-based cohort attributes.

Results: In fully adjusted models analysing 1119 cases of suicide, Roman Catholics, Protestants and those professing no religion recorded similar risks. The risk associated with conservative Christians was lower than that for Catholics (HR = 0.71, 95% CI 0.52–0.97).

Conclusions: The relationship between religious affiliation and suicide established by Durkheim may not pertain in societies where suicide rates are highest at younger ages. Risks are similar for those with and without a religious affiliation, and Catholics (who traditionally are characterised by higher levels of church attendance) do not demonstrate lower risk of suicide. However, religious affiliation is a poor measure of religiosity, except for a small group of conservative Christians, although their lower risk of suicide may be attributable to factors such as lower risk behaviour and alcohol consumption.