Prediction of ionic liquid properties. II. Volumetric properties as a function of temperature and pressure

The density of ionic liquids (ILs) as a function of pressure and temperature has been modeled using a group contribution model. This model extends the calculations previously reported (Jacquemin et al. J. Chem. Eng. Data 2008) which used 4000 IL densities at 298.15 K and 600 IL densities as a function of temperature up to 423 K at 0.1 MPa to pressures up to 207 MPa by using described data in the literature and presented in this study. The densities of two different ionic liquids (butyltrimethylammonium bis(trifluoromethylsulfonyl)imide, [N][NTf], and 1-butyl-l-methyl-pyrrolidiniumbis(trifluoromethylsulfonyl)imide, [C mPyrro]-[NTf]) were measured as a function of temperature from (293 to 415) K and over an extended pressure range from (0.1 to 40) MPa using a vibrating-tube densimeter. The model is able to predict the ionic liquid densities of over 5080 experimental data points to within 0.36%. In addition, this methodology allows the calculation of the mechanical coefficients using the calculated density as a function of temperature and pressure with an estimated uncertainty of ± 20%. © 2008 American Chemical Society.

Low pressure carbon dioxide solubility in lithium-ion batteries based electrolytes as a function of temperature. Measurement and prediction

We present in this study the effect of nature and concentration of lithium salt, such as the lithium hexafluorophosphate, LiPF6; lithium tris(pentafluoroethane)-trifluorurophosphate LiFAP; lithium bis(trifluoromethylsulfonyl)imide, LiTFSI, on the CO2 solubility in four electrolytes for lithium ion batteries based on pure solvent that include ethylene carbonate (EC), dimethyl carbonate (DMC), ethyl methyl carbonate (EMC), diethyl carbonate (DEC), as well as, in the EC:DMC, EC:EMC and EC:DEC (50:50) wt.% binary mixtures as a function of temperature from (283 to 353) K and atmospheric pressure. Based on experimental solubility values, the Henry’s law constant of the carbon dioxide in these solutions with the presence or absence of lithium salt was then deduced and compared with reported values from the literature, as well as with those predicted by using COSMO-RS methodology within COSMOThermX software. From this study, it appears that the addition of 1 mol · dm-3 LiPF6 salt in alkylcarbonate solvents decreases their CO2 capture capacity. By using the same experimental conditions, an opposite CO2 solubility trend was generally observed in the case of the addition of LiFAP or LiTFSI salts in these solutions. Additionally, in all solutions investigated during this work, the CO2 solubility is greater in electrolytes containing the LiFAP salt, followed by those based on the LiTFSI case. The precision and accuracy of the experimental data reported therein, which are close to (1 and 15)%, respectively. From the variation of the Henry’s law constant with temperature, the partial molar thermodynamic functions of dissolution such as the standard Gibbs energy, the enthalpy, and the entropy, as well as the mixing enthalpy of the solvent with CO2 in its hypothetical liquid state were calculated. Finally, a quantitative analysis of the CO2 solubility evolution was carried out in the EC:DMC (50:50) wt.% binary mixture as the function of the LiPF6 or LiTFSI concentration in solution to elucidate how ionic species modify the CO2 solubility in alkylcarbonates-based Li-ion electrolytes by investigating the salting effects at T = 298.15 K and atmospheric pressure.

Klebsiella pneumoniae OmpA confers resistance to antimicrobial peptides

A Klebsiella pneumoniae ompA mutant was more susceptible to antimicrobial peptides (APs) than the wild type. Susceptibility did not result from surface changes other than the absence of OmpA. Our data suggest that OmpA is implicated in the activation of yet-unknown systems dedicated to ameliorating AP cytotoxicity.

The impact of body mass index on maternal and neonatal outcomes: a retrospective study in a UK obstetric population, 2004-2011

Objective: To assess the prevalence of overweight and obesity, and the impact of body mass index (BMI) on maternal and neonatal outcomes, in a UK obstetric population.
Design: Retrospective study.
Setting: A tertiary referral unit in Northern Ireland.
Population: A total of 30 298 singleton pregnancies over an 8-year period, 2004–2011.
Methods: Women were categorised according to World Health Organization classification: underweight (BMI < 18.50 kg/m2); normal weight (BMI 18.50–24.99 kg/m2; reference group); overweight (BMI 25.00–29.99 kg/m2); obese class I (BMI 30.00–34.99 kg/m2); obese class II (BMI 35–39.99 kg/m2); and obese class III (BMI = 40 kg/m2). Maternal and neonatal outcomes were examined using logistic regression, adjusted for confounding variables.
Main outcome measures: Maternal and neonatal outcomes.
Results: Compared with women of normal weight, women who were overweight or obese class I were at significantly increased risk of hypertensive disorders of pregnancy (OR 1.9, 99% CI 1.7–2.3; OR 3.5, 99% CI 2.9–4.2); gestational diabetes mellitus (OR 1.7, 99% CI 1.3–2.3; OR 3.7, 99% CI 2.8–5.0); induction of labour (OR 1.2, 99% CI 1.1–1.3; OR 1.3, 99% CI 1.2–1.5); caesarean section (OR 1.4, 99% CI 1.3–1.5; OR 1.8, 99% CI 1.6–2.0); postpartum haemorrhage (OR 1.4, 99% CI 1.3–1.5; OR 1.8, 1.6–2.0); and macrosomia (OR 1.5, 99% CI 1.3–1.6; OR 1.9, 99% CI 1.6–2.2), with the risks increasing for obese classes II and III. Women in obese class III were at increased risk of preterm delivery (OR 1.6, 99% CI 1.1–2.5), stillbirth (OR 3.0, 99% CI 1.0–9.3), postnatal stay > 5 days (OR 2.1, 99% CI 1.5–3.1), and infant requiring admission to a neonatal unit (OR 1.6, 99% CI 1.0–2.6).
Conclusions: By categorising women into overweight and obesity subclassifications (classes I –III), this study clearly demonstrates an increasing risk of adverse outcomes across BMI categories, with women who are overweight also at significant risk.
Keywords Body mass index, maternal and neonatal outcomes,obesity, pregnancy

High-capacity hydrogen and nitric oxide adsorption and storage in a metal-organic framework

Gas adsorption experiments have been carried out on a copper benzene tricarboxylate metal-organic framework material, HKUST-1. Hydrogen adsorption at 1 and 10 bar (both 77 K) gives an adsorption capacity of 11.16 mmol H-2 per g of HKUST-1 (22.7 mg g(-1), 2.27 wt %) at 1 bar and 18 mmol per g (36.28 mg g(-1), 3.6 wt %) at 10 bar. Adsorption of D-2 at 1 bar (77 K) is between 1.09 (at 1 bar) and 1.20(at < 100 mbar) times the H-2 values depending on the pressure, agreeing with the theoretical expectations. Gravimetric adsorption measurements of NO on HKUST-1 at 196 K (1 bar) gives a large adsorption capacity of similar to 9 mmol g(-1), which is significantly greater than any other adsorption capacity reported on a porous solid. At 298 K the adsorption capacity at 1 bar is just over 3 mmol g(-1). Infra red experiments show that the NO binds to the empty copper metal sites in HKUST-1. Chemiluminescence and platelet aggregometry experiments indicate that the amount of NO recovered on exposure of the resulting complex to water is enough to be biologically active, completely inhibiting platelet aggregation in platelet rich plasma.

From non-porous crystalline to amorphous microporous metal(IV) bisphosphonates

Porous layered hybrid materials have been prepared by the reaction of organo-bisphosphonate ligands, 4-(4'-phosphonophenoxy)phenylphosphonic, 4,4'-biphenylenbisphosphonic and phenylphosphonic acids, with metal(IV) cations (Zr and Sn). Crystalline Zr(IV) and Sn(IV) layered bisphosphonates were also prepared, which were non-porous. The amorphous M(IV) bisphosphonates showed variable compositions and textural properties ranging from mainly mesoporous to highly microporous solids with BET surface areas varying from 300 to 480 m(2) g(-1), micropore volumes ranging 0.10-0.20 cm(3)/g, and narrow porous size distributions for some materials. N-2 isotherms suggest that Sn(IV) derivatives show a comparatively higher micropore contribution than the Zr(IV) analogous at least for the ether-bisphosphonate hybrids. Sn(IV) bisphosphonates exhibit high microporosities without the need of using harmful DMSO as solvent. If ether-bisphosphonic acid is partially replaced by less expensive phenylphosphonic ligand, porous products are also obtained. P-31 and F-17 MAS NMR and XPS data revealed the presence of hydrogen-phosphonate groups and small (F-, Cl- and OH-) anions, which act as spacer ligands within the inorganic layers, in these hybrid materials. The complexity of the inorganic layers is higher for the Sn(IV) bisphosphonates likely due to the larger amount of small bridging anions including fluorides. It is suggested that the presence of these small inorganic ligands may be a key factor influencing both, the interaction of the inorganic layer with the bisphosphonate groups, which bridge the inorganic layers, and the generation of internal voids within a given inorganic layer. Preliminary studies of gases adsorption (H-2 and NO) have been carried out for selected Sn(IV) bisphosphonates. The H-2 adsorption capacity at 77 K and 1 bar was low, 0.26 wt%, but the NO adsorption capacity at similar to 1 bar and 298 K was relatively high, 4.2 wt%. Moreover, the hysteresis in the NO isotherms is indicative of partial strong irreversible adsorption of NO. (C) 2008 Elsevier Inc. All rights reserved.

Reducing the psychological distress of family caregivers of home-based palliative care patients: short-term effects from a randomised controlled trial

BACKGROUND: Palliative care is expected to incorporate comprehensive support for family caregivers given that many caregivers suffer psychological morbidity. However, systematically implemented evidence-based psychological support initiatives are lacking.
AIM: The objective of this study was to prepare caregivers for the role of supporting a patient with advanced cancer receiving home-based palliative care by offering a one-to-one psycho-educational intervention. We hypothesised that primary family caregivers who participated in the intervention would report decreased psychological distress (primary outcome), fewer unmet needs and increased levels of perceived preparedness, competence and positive emotions.
METHODS: A three-arm randomised controlled trial was conducted comparing two versions of the intervention (one face-to-face visit versus two visits) plus standard care to a control group (standard care) across four sites in Australia.
RESULTS: A total of 298 participants were recruited; 148 were in the Control condition, 57 in Intervention 1 (one visit) and 93 in Intervention 2 (two visits). Relative to participants in the control group; the psychological well-being of participants in the intervention condition was improved by a small amount but non-significantly. No significant reduction in unmet needs or improvements in positive aspects of caregiving amongst the intervention group were identified. However, the intervention demonstrated significant improvements in participants' levels of preparedness and competence for Intervention 2.
CONCLUSION/IMPLICATIONS: This research adds to accumulating body of evidence demonstrating that relatively short psycho-educational interventions can enable family caregivers to feel more prepared and competent in the role of supporting a dying relative. Further investigation is required to determine the longer term outcomes of such interventions. 

Comparison between laser scanning tomography and computerised image analysis of the optic disc

Aims - To study the interchangeability of the measurements of the optic disc topography obtained by one computerised image analyser and one confocal laser tomographic scanner. Methods - One eye of 28 patients with glaucoma or glaucoma suspects was studied. All cases had simultaneous stereoscopic disc photographs taken with the fundus camera Topcon TRC-SS and optic disc examination with the Heidelberg retina tomograph (HRT) during the same visit. The optic disc photographs were digitised and analysed with the Topcon ImageNet (TI) system. Three variables of the optic disc topography provided by the TI and the HRT were compared - cup volume (CV), rim area (RA), and cup area to disc area ratio (CA/DA). Results - The mean values of CV and RA provided by the TI (0.52 (SD 0.32) mm and 1.58 (0.39) mm , respectively) were greater (p <0.01) than the mean values of CV and RA determined by the HRT (0.32 (0.25) mm , and 1.33 (0.47) mm , respectively). The mean value of CA/DA provided by the TI (0.42 (0.14)) and the HRT (0.42 (0.18)) was similar (p = 0.93). Correlation coefficients between measurements obtained by the two methods ranged from 0.53 to 0.73. Conclusion - There was a significant discrepancy in the measurements of rim area and cup volume of the optic disc obtained by a computerised image analyser and a laser scanning tomograph.

Liquid densities, heat capacities, refractive index and excess quantities for {protic ionic liquids plus water} binary system

Densities, rho, of aqueous solutions of the room temperature protic ionic liquid (PIL), pyrrolidinium nitrate are determined at the atmospheric pressure over the temperature range from (283.15 to 323.15) K and within the whole composition range. The molar isobaric heat capacities, C(p), and refractive index, n(D), of {PIL + water} binary system are measured at 298.15 K. The excess molar volumes V(E), excess molar isobaric heat capacities C(p)(E), and deviation from ideality of refractive index Delta(phi)n, of pyrrolidinium nitrate aqueous solutions were deduced from the experimental results as well as apparent molar volumes V(phi), partial molar volumes (V) over bar (m,i), and thermal expansion coefficients alpha(p). The V(E) values were found to be positive over the entire composition range at all temperatures studied therein, whereas deviations from ideality were negative for refractive index Delta(phi)n. The volumetric properties of binary mixtures containing water and four other protic ionic liquids, such as pyrrolidinium hydrogen sulfate, pyrrolidinium formiate, collidinium formate, and diisopropyl-ethylammonium formate were also determined at 298.15 K. Results have been then discussed in terms of molecular interactions and molecular structures in these binary mixtures. (C) 2009 Elsevier Ltd. All rights reserved.

Au Nanoparticles for Applications in Analysis of Cellular and Biomolecular Recognitions

Au nanoparticles (AuNPs) have attracted a great interest in fabrication of various biosensor systems for analysis of cellular and biomolecular recognitions. In conjunction with vast conjugation chemistry available, the materials are easily coupled with biomolecules such as nucleic acids, antigens or antibodies in order to achieve their many potential applications as ligand carriers or transducing platforms for preparation, detection and quantification purposes. Furthermore, the nanoparticles possess easily tuned and unique optical/ physical/ chemical characteristics, and high surface areas, making them ideal candidates to this end. In this topic, sensing mechanisms based on localized surface plasmon resonance (LSPR), particle aggregation, catalytic property, and Fluorescence Resonance Energy Transfer (FRET) of AuNPs as well as barcoding technologies including DNA biobarcodes will be discussed.

Structural and magnetic properties of Ni1-xZnxFe2O4 (x=0, 0.5 and 1) nanopowders prepared by sol-gel method

A series of nanostructured Ni-Zn ferrites Ni1-xZnxFe2O4 (x=0, 0.5 and 1) with a grain size from 24 to 65 nm have been prepared with a sol-gel method. The effect of composition and sintering temperature on morphology, magnetic properties, Curie temperature, specific heating rate at 295 kHz and hysteresis loss have been studied. The highest coercivity of 50 and 40 Oe, were obtained for NiFe2O4 and Ni0.5Zn0.5Fe2O4 samples with the grain size of 35 and 29 nm, respectively. The coercivity of Ni and Ni-Zn mixed ferrites decreased with temperature. The Bloch exponent was 1.5 for all samples. As the grain size increased, the Curie temperature of NiFe2O4 increased from 849 to 859 K. The highest saturation magnetization of 70 emu/g at 298 K and the highest specific heating rate of 1.6 K/s under radiofrequency heating at 295 kHz were observed over NiFe2O4 calcined at 1073 K. Both the magnitude of the hysteresis loss and the temperature dependence of the loss are influenced by the sintering temperature and composition.

Scanning Probe Microscopy for Energy Research : Materials, Devices, and Applications:Scanning Probe Microscopy for Energy Research : Materials, Devices, and Applications

Scanning Probes for Fuel Cells and Local Electrochemistry

Dimensions of religious and national identity among Irish adolescents growing up in two jurisdictions

This poster explores the impact of growing up in different socio-political environments in the border areas of the Republic of Ireland (RoI) and Northern Ireland (NI) on adolescents’ evaluations of their religious and national identities. The vast majority of the population of the Republic of Ireland are Catholic and Irish whereas in Northern Ireland, the majority are Protestant and British. 713 adolescents (NI= 415; RoI=298), who categorised their religious identity as Catholic and their nationality as Irish completed the Collective Self – Esteem (CSE) scale (Crocker & Luhtanen, 1990) with reference to either their religious (N=350) or national identity (n=363). The overall rating of CSE for the Irish identity was significantly higher than the rating of CSE for the Catholic Identity. This result was modified by a significant interaction - adolescents in the Republic of Ireland rated the CSE of their Irish nationality higher than those in Northern Ireland (20.99 vs. 19.95), whereas adolescents in Northern Ireland rated the CSE of their Catholic religious identity higher than their peers in the Republic of Ireland (19.97 vs 18.87). Further analysis of the CSE subscales revealed differing patterns of relationships according to the scale. The evaluation of the Public Collective Self-Esteem of national and religious identities were significantly higher in the Republic of Ireland than in Northern Ireland, however Private Collective Self-esteem did not differ according to jurisdiction. These findings are discussed in relation to the social context and current theoretical accounts of collective identification processes.

Polarisabilities of alkylimidazolium ionic liquids

The molar polarisability and molar volume for 71 ionic liquids were extracted from 157 measurements of their refractive index and density, which were then further deconstructed into atomic contributions by means of a Designed Regression analysis. Using this approach, the density and refractive index for any chosen ionic liquid with alkyl-substituted imidazolium cations can be predicted in good agreement with experimental data.

Survival for haematological malignancies in Europe between 1997 and 2008 by region and age: results of EUROCARE-5, a population-based study

Background: More effective treatments have become available for haematological malignancies from the early 2000s, but few large-scale population-based studies have investigated their effect on survival. Using EUROCARE data, and HAEMACARE morphological groupings, we aimed to estimate time trends in population-based survival for 11 lymphoid and myeloid malignancies in 20 European countries, by region and age. Methods: In this retrospective observational study, we included patients (aged 15 years and older) diagnosed with haematological malignancies, diagnosed up to Dec 31, 2007, and followed up to Dec 31, 2008. We used data from the 30 cancer registries (across 20 countries) that provided continuous incidence and good quality data from 1992 to 2007. We used a hybrid approach to estimate age-standardised and age-specific 5-year relative survival, for each malignancy, overall and for five regions (UK, and northern, central, southern, and eastern Europe), and four 3-year periods (1997–99, 2000–02, 2003–05, 2006–08). For each malignancy, we also estimated the relative excess risk of death during the 5 years after diagnosis, by period, age, and region. Findings: We analysed 560 444 cases. From 1997–99 to 2006–08 survival increased for most malignancies: the largest increases were for diffuse large B-cell lymphoma (42·0% [95% CI 40·7–43·4] to 55·4% [54·6–56·2], p<0·0001), follicular lymphoma (58·9% [57·3–60·6] to 74·3% [72·9–75·5], p<0·0001), chronic myeloid leukaemia (32·3% [30·6–33·9] to 54·4% [52·5–56·2], p<0·0001), and acute promyelocytic leukaemia (50·1% [43·7–56·2] to 61·9% [57·0–66·4], p=0·0038, estimate not age-standardised). Other survival increases were seen for Hodgkin's lymphoma (75·1% [74·1–76·0] to 79·3% [78·4–80·1], p<0·0001), chronic lymphocytic leukaemia/small lymphocytic lymphoma (66·1% [65·1–67·1] to 69·0% [68·1–69·8], p<0·0001), multiple myeloma/plasmacytoma (29·8% [29·0–30·6] to 39·6% [38·8–40·3], p<0·0001), precursor lymphoblastic leukaemia/lymphoma (29·8% [27·7–32·0] to 41·1% [39·0–43·1], p<0·0001), acute myeloid leukaemia (excluding acute promyelocytic leukaemia, 12·6% [11·9–13·3] to 14·8% [14·2–15·4], p<0·0001), and other myeloproliferative neoplasms (excluding chronic myeloid leukaemia, 70·3% [68·7–71·8] to 74·9% [73·8–75·9], p<0·0001). Survival increased slightly in southern Europe, more in the UK, and conspicuously in northern, central, and eastern Europe. However, eastern European survival was lower than that for other regions. Survival decreased with advancing age, and increased with time only slightly in patients aged 75 years or older, although a 10% increase in survival occurred in elderly patients with follicular lymphoma, diffuse large B-cell lymphoma, and chronic myeloid leukaemia. Interpretation: These trends are encouraging. Widespread use of new and more effective treatment probably explains much of the increased survival. However, the persistent differences in survival across Europe suggest variations in the quality of care and availability of the new treatments. High-resolution studies that collect data about stage at diagnosis and treatments for representative samples of cases could provide further evidence of treatment effectiveness and explain geographic variations in survival.