MIMO cooperative communication network design with relay selection and CSI feedback

In this paper, we investigate an amplify-and-forward (AF) multiple-input multiple-output - spatial division multiplexing (MIMO-SDM) cooperative wireless networks, where each network node is equipped with multiple antennas. In order to deal with the problems of signal combining at the destination and cooperative relay selection, we propose an improved minimum mean square error (MMSE) signal combining scheme for signal recovery at the destination. Additionally, we propose two distributed relay selection algorithms based on the minimum mean squared error (MSE) of the signal estimation for the cases where channel state information (CSI) from the source to the destination is available and unavailable at the candidate nodes. Simulation results demonstrate that the proposed combiner together with the proposed relay selection algorithms achieve higher diversity gain than previous approaches in both flat and frequency-selective fading channels.

Time Efficient Assessment and Feedback Methods for Large Computer-Aided-Design Cohorts

Timely and individualized feedback on coursework is desirable from a student perspective as it facilitates formative development and encourages reflective learning practice. Faculty however are faced with a significant and potentially time consuming challenge when teaching larger cohorts if they are to provide feedback which is timely, individualized and detailed. Additionally, for subjects which assess non-traditional submissions, such as Computer-Aided-Design (CAD), the methods for assessment and feedback tend not to be so well developed or optimized. Issues can also arise over the consistency of the feedback provided. Evaluations of Computer-Assisted feedback in other disciplines (Denton et al, 2008), (Croft et al, 2001) have shown students prefer this method of feedback to traditional “red pen” marking and also that such methods can be more time efficient for faculty.
Herein, approaches are described which make use of technology and additional software tools to speed up, simplify and automate assessment and the provision of feedback for large cohorts of first and second year engineering students studying modules where CAD files are submitted electronically. A range of automated methods are described and compared with more “manual” approaches. Specifically one method uses an application programming interface (API) to interrogate SolidWorks models and extract information into an Excel spreadsheet, which is then used to automatically send feedback emails. Another method describes the use of audio recordings made during model interrogation which reduces the amount of time while increasing the level of detail provided as feedback.
Limitations found with these methods and problems encountered are discussed along with a quantified assessment of time saving efficiencies made.

Sonification as Concurrent Augmented Feedback for Motor Skill Learning and the Importance of Mapping Design

In recent years, sonification of movement has emerged as a viable method for the provision of feedback in motor learning. Despite some experimental validation of its utility, controlled trials to test the usefulness of sonification in a motor learning context are still rare. As such, there are no accepted conventions for dealing with its implementation. This article addresses the question of how continuous movement information should be best presented as sound to be fed back to the learner. It is proposed that to establish effective approaches to using sonification in this context, consideration must be given to the processes that underlie motor learning, in particular the nature of the perceptual information available to the learner for performing the task at hand. Although sonification has much potential in movement performance enhancement, this potential is largely unrealised as of yet, in part due to the lack of a clear framework for sonification mapping: the relationship between movement and sound. By grounding mapping decisions in a firmer understanding of how perceptual information guides learning, and an embodied cognition stance in general, it is hoped that greater advances in use of sonification to enhance motor learning can be achieved.

Feedback Networks and Self-Oscillating Objects

A system of self-designed microphones, speakers and transducers creating performable feedback networks and self-oscillating objects. Performance SARC Sonic Lab, Belfast, 18 March 2015

Improving E-Assessment Systems With A focus On Adaptive Feedback And Marking

Institutions involved in the provision of tertiary education across Europe are feeling the pinch. European universities, and other higher education (HE) institutions, must operate in a climate where the pressure of government spending cuts (Garben, 2012) is in stark juxtaposition to the EU’s strategy to drive forward and maintain a growth of student numbers in the sector (eurostat, 2015).

In order to remain competitive, universities and HE institutions are making ever-greater use of electronic assessment (E-Assessment) systems (Chatzigavriil et all, 2015; Ferrell, 2012). These systems are attractive primarily because they offer a cost-effect and scalable approach for assessment. In addition to scalability, they also offer reliability, consistency and impartiality; furthermore, from the perspective of a student they are most popular because they can offer instant feedback (Walet, 2012).

There are disadvantages, though.

First, feedback is often returned to a student immediately on competition of their assessment. While it is possible to disable the instant feedback option (this is often the case during an end of semester exam period when assessment scores must be can be ratified before release), however, this option tends to be a global ‘all on’ or ‘all off’ configuration option which is controlled centrally rather than configurable on a per-assessment basis.

If a formative in-term assessment is to be taken by multiple groups of
students, each at different times, this restriction means that answers to each question will be disclosed to the first group of students undertaking the assessment. As soon as the answers are released “into the wild” the academic integrity of the assessment is lost for subsequent student groups.

Second, the style of feedback provided to a student for each question is often limited to a simple ‘correct’ or ‘incorrect’ indicator. While this type of feedback has its place, it often does not provide a student with enough insight to improve their understanding of a topic that they did not answer correctly.

Most E-Assessment systems boast a wide range of question types including Multiple Choice, Multiple Response, Free Text Entry/Text Matching and Numerical questions. The design of these types of questions is often quite restrictive and formulaic, which has a knock-on effect on the quality of feedback that can be provided in each case.

Multiple Choice Questions (MCQs) are most prevalent as they are the most prescriptive and therefore most the straightforward to mark consistently. They are also the most amenable question types, which allow easy provision of meaningful, relevant feedback to each possible outcome chosen.
Text matching questions tend to be more problematic due to their free text entry nature. Common misspellings or case-sensitivity errors can often be accounted for by the software but they are by no means fool proof, as it is very difficult to predict in advance the range of possible variations on an answer that would be considered worthy of marks by a manual marker of a paper based equivalent of the same question.

Numerical questions are similarly restricted. An answer can be checked for accuracy or whether it is within a certain range of the correct answer, but unless it is a special purpose-built mathematical E-Assessment system the system is unlikely to have computational capability and so cannot, for example, account for “method marks” which are commonly awarded in paper-based marking.

From a pedagogical perspective, the importance of providing useful formative feedback to students at a point in their learning when they can benefit from the feedback and put it to use must not be understated (Grieve et all, 2015; Ferrell, 2012).

In this work, we propose a number of software-based solutions, which will overcome the limitations and inflexibilities of existing E-Assessment systems.

Pharmacist-led feedback workshops increase appropriate prescribing of antimicrobials

Objectives To investigate whether and how structured feedback sessions can increase rates of appropriate antimicrobial prescribing by junior doctors.

Methods This was a mixed-methods study, with a conceptual orientation towards complexity and systems thinking. Fourteen junior doctors, in their first year of training, were randomized to intervention (feedback) and 21 to control (routine practice) groups in a single UK teaching hospital. Feedback on their antimicrobial prescribing was given, in writing and via group sessions. Pharmacists assessed the appropriateness of all new antimicrobial prescriptions 2 days per week for 6 months (46 days). The mean normalized prescribing rates of suboptimal to all prescribing were compared between groups using the t-test. Thematic analysis of qualitative interviews with 10 participants investigated whether and how the intervention had impact.

Results Data were collected on 204 prescriptions for 166 patients. For the intervention group, the mean normalized rate of suboptimal to all prescribing was 0.32 ± 0.36; for the control group, it was 0.68 ± 0.36. The normalized rates of suboptimal prescribing were significantly different between the groups (P = 0.0005). The qualitative data showed that individuals' prescribing behaviour was influenced by a complex series of dynamic interactions between individual and social variables, such as interplay between personal knowledge and the expectations of others.

Conclusions The feedback intervention increased appropriate prescribing by acting as a positive stimulus within a complex network of behavioural influences. Prescribing behaviour is adaptive and can be positively influenced by structured feedback. Changing doctors' perceptions of acceptable, typical and best practice could reduce suboptimal antimicrobial prescribing.

Transposing Musical Skill: Sonification of movement as concurrent augmented feedback enhances learning in a bimanual task

Concurrent feedback provided during acquisition can enhance performance of novel tasks. The ‘guidance hypothesis’ predicts that feedback provision leads to dependence and poor performance in its absence. However, appropriately-structured feedback information provided through sound (‘sonification’) may not be subject to this effect. We test this directly using a rhythmic bimanual shape-tracing task in which participants learned to move at a 4:3 timing ratio. Sonification of movement and demonstration was compared to two other learning conditions: (1) sonification of task demonstration alone and (2) completely silent practice (control). Sonification of movement emerged as the most effective form of practice, reaching significantly lower error scores than control. Sonification of solely the demonstration, which was expected to benefit participants by perceptually unifying task requirements, did not lead to better performance than control. Good performance was maintained by participants in the sonification condition in an immediate retention test without feedback, indicating that the use of this feedback can overcome the guidance effect. On a 24-hour retention test, performance had declined and was equal between groups. We argue that this and similar findings in the feedback literature are best explained by an ecological approach to motor skill learning which places available perceptual information at the highest level of importance.

Is Our Students Learning - QuestionMark: Extending E-Assessment Systems for Adapative Marking and Feedback

Our key contribution is a flexible, automated marking system that adds desirable functionality to existing E-Assessment systems. In our approach, any given E-Assessment system is relegated to a data-collection mechanism, whereas marking and the generation and distribution of personalised per-student feedback is handled separately by our own system. This allows content-rich Microsoft Word feedback documents to be generated and distributed to every student simultaneously according to a per-assessment schedule.

The feedback is adaptive in that it corresponds to the answers given by the student and provides guidance on where they may have gone wrong. It is not limited to simple multiple choice which are the most prescriptive question type offered by most E-Assessment Systems and as such most straightforward to mark consistently and provide individual per-alternative feedback strings. It is also better equipped to handle the use of mathematical symbols and images within the feedback documents which is more flexible than existing E-Assessment systems, which can only handle simple text strings.

As well as MCQs the system reliably and robustly handles Multiple Response, Text Matching and Numeric style questions in a more flexible manner than Questionmark: Perception and other E-Assessment Systems. It can also reliably handle multi-part questions where the response to an earlier question influences the answer to a later one and can adjust both scoring and feedback appropriately.

New question formats can be added at any time provided a corresponding marking method conforming to certain templates can also be programmed. Indeed, any question type for which a programmatic method of marking can be devised may be supported by our system. Furthermore, since the student’s response to each is question is marked programmatically, our system can be set to allow for minor deviations from the correct answer, and if appropriate award partial marks.

Posterior Probability Modeling and Image Classification for Archaeological Site Prospection: Building a Survey Efficacy Model for Identifying Neolithic Felsite Workshops in the Shetland Islands

The application of custom classification techniques and posterior probability modeling (PPM) using Worldview-2 multispectral imagery to archaeological field survey is presented in this paper. Research is focused on the identification of Neolithic felsite stone tool workshops in the North Mavine region of the Shetland Islands in Northern Scotland. Sample data from known workshops surveyed using differential GPS are used alongside known non-sites to train a linear discriminant analysis (LDA) classifier based on a combination of datasets including Worldview-2 bands, band difference ratios (BDR) and topographical derivatives. Principal components analysis is further used to test and reduce dimensionality caused by redundant datasets. Probability models were generated by LDA using principal components and tested with sites identified through geological field survey. Testing shows the prospective ability of this technique and significance between 0.05 and 0.01, and gain statistics between 0.90 and 0.94, higher than those obtained using maximum likelihood and random forest classifiers. Results suggest that this approach is best suited to relatively homogenous site types, and performs better with correlated data sources. Finally, by combining posterior probability models and least-cost analysis, a survey least-cost efficacy model is generated showing the utility of such approaches to archaeological field survey.

Does video feedback analysis improve CPR performance in phase 5 medical students?

Background The use of simulation in medical education is increasing, with students taught and assessed using simulated patients and manikins. Medical students at Queen’s University of Belfast are taught advanced life support cardiopulmonary resuscitation as part of the undergraduate curriculum. Teaching and feedback in these skills have been developed in Queen’s University with high-fidelity manikins. This study aimed to evaluate the effectiveness of video compared to verbal feedback in assessment of student cardiopulmonary resuscitation performance Methods Final year students participated in this study using a high-fidelity manikin, in the Clinical Skills Centre, Queen’s University Belfast. Cohort A received verbal feedback only on their performance and cohort B received video feedback only. Video analysis using ‘StudioCode’ software was distributed to students. Each group returned for a second scenario and evaluation 4 weeks later. An assessment tool was created for performance assessment, which included individual skill and global score evaluation. Results One hundred thirty eight final year medical students completed the study. 62 % were female and the mean age was 23.9 years. Students having video feedback had significantly greater improvement in overall scores compared to those receiving verbal feedback (p = 0.006, 95 % CI: 2.8–15.8). Individual skills, including ventilation quality and global score were significantly better with video feedback (p = 0.002 and p < 0.001, respectively) when compared with cohort A. There was a positive change in overall score for cohort B from session one to session two (p < 0.001, 95 % CI: 6.3–15.8) indicating video feedback significantly benefited skill retention. In addition, using video feedback showed a significant improvement in the global score (p < 0.001, 95 % CI: 3.3–7.2) and drug administration timing (p = 0.004, 95 % CI: 0.7–3.8) of cohort B participants, from session one to session two. Conclusions There is increased use of simulation in medicine but a paucity of published data comparing feedback methods in cardiopulmonary resuscitation training. Our study shows the use of video feedback when teaching cardiopulmonary resuscitation is more effective than verbal feedback, and enhances skill retention. This is one of the first studies to demonstrate the benefit of video feedback in cardiopulmonary resuscitation teaching.

The Use of a Pressure-Indicating Sensor Film to Provide Feedback upon Hydrogel-Forming Microneedle Array Self-Application In Vivo

PURPOSE:
To evaluate the combination of a pressure-indicating sensor film with hydrogel-forming microneedle arrays, as a method of feedback to confirm MN insertion in vivo.
METHODS:
Pilot in vitro insertion studies were conducted using a Texture Analyser to insert MN arrays, coupled with a pressure-indicating sensor film, at varying forces into excised neonatal porcine skin. In vivo studies involved twenty human volunteers, who self-applied two hydrogel-forming MN arrays, one with a pressure-indicating sensor film incorporated and one without. Optical coherence tomography was employed to measure the resulting penetration depth and colorimetric analysis to investigate the associated colour change of the pressure-indicating sensor film.
RESULTS:
Microneedle insertion was achieved in vitro at three different forces, demonstrating the colour change of the pressure-indicating sensor film upon application of increasing pressure. When self-applied in vivo, there was no significant difference in the microneedle penetration depth resulting from each type of array, with a mean depth of 237 μm recorded. When the pressure-indicating sensor film was present, a colour change occurred upon each application, providing evidence of insertion.
CONCLUSIONS:
For the first time, this study shows how the incorporation of a simple, low-cost pressure-indicating sensor film can indicate microneedle insertion in vitro and in vivo, providing visual feedback to assure the user of correct application. Such a strategy may enhance usability of a microneedle device and, hence, assist in the future translation of the technology to widespread clinical use.