Artemisinins act through at least two targets in a yeast model

Artemisinin and related compounds are potent and widely used antimalarial drugs but their biochemical mode of action is not clear. There is strong evidence that ATP-dependent calcium transporters are a key target in the malarial parasite. However, work using Saccharomyces cerevisiae suggests that disruption of mitochondrial function is critical in the cell killing activity of these compounds. Here it is shown that, in the absence of reducing agents, artemisinin and artesunate targeted the S. cerevisiae calcium channels Pmr1p and Pmc1p. Both compounds affected the growth of yeast on fermentable and nonfermentable media. This growth inhibition was not seen in a yeast strain in which the genes encoding both calcium channels were deleted. In the presence of reducing agents, which break the endoperoxide bridge in the drugs, growth inhibition was only observed in nonfermentable media. This inhibition could be partially relieved by the addition of a free radical scavenger. These results suggest that the drugs have two biochemical modes of action - one acting by specific binding to calcium channels and one involving free radical production in the mitochondria.

Controlled redistribution of vibrational population by few-cycle strong-field laser pulses

The use of strong-field (i.e. intensities in excess of 10(13) Wcm(-2)) few-cycle ultrafast (durations of 10 femtoseconds or less) laser pulses to create, manipulate and image vibrational wavepackets is investigated. Quasi-classical modelling of the initial superposition through tunnel ionization, wavepacket modification by nonadiabatically altering the nuclear environment via the transition dipole and the Stark effect, and measuring the control outcome by fragmenting the molecule is detailed. The influence of the laser intensity on strong-field ultrafast wavepacket control is discussed in detail: by modifying the distribution of laser intensities imaged, we show that focal conditions can be created that give preference to this three-pulse technique above processes induced by the pulses alone. An experimental demonstration is presented, and the nuclear dynamics inferred by the quasi-classical model discussed. Finally, we present the results of a systematic investigation of a dual-control pulse scheme, indicating that single vibrational states should be observable with high fidelity, and the populated state defined by varying the arrival time of the two control pulses. The relevance of such strong-field coherent control methods to the manipulation of electron localization and attosecond science is discussed.

Optical source model for the 23.2-23.6 nm radiation from the multielement germanium soft X-ray laser

Distributions of source intensity in two dimensions (designated the source model), averaged over a single laser pulse, based on experimental measurements of spatial coherence, are considered for radiation from the unresolved 23.2/23.6 nm spectral lines from the germanium collisional X-ray laser. The model derives from measurements of the visibility of Young slit interference fringes determined by a method based on the Wiener-Khinchin theorem. Output from amplifiers comprising three and four target elements have similar coherence properties in directions within the horizontal plane corresponding to strong plasma refraction effects and fitting the coherence data shows source dimensions (FWHM) are similar to 26 mu m (horizontal), significantly smaller than expected by direct imaging, and similar to 125 mu m (vertical: equivalent to the height of the driver excitation). (C) 1999 Elsevier Science B.V. All rights reserved.

‘What Adult Worker Model? A Critical Look at Recent Social Policy Reform in Europe from a Gender and Family Perspective

Analyses regularly feature claims that European welfare states are in the process of creating an adult worker model. The theoretical and empirical basis of this argument is examined here by looking first at the conceptual foundations of the adult worker model formulation and then at the extent to which social policy reform in western Europe fits with the argument. It is suggested that the adult worker formulation is under-specified. A framework incorporating four dimensions—the treatment of individuals vis-à-vis their family role and status for the purposes of social rights, the treatment of care, the treatment of the family as a social institution, and the extent to which gender inequality is problematized—is developed and then applied. The empirical analysis reveals a strong move towards individualization as social policy promotes and valorizes individual agency and self-sufficiency and shifts some childcare from the family. Yet evidence is also found of continued (albeit changed) familism. Rather than an unequivocal move to an individualized worker model then, a dual earner, gender-specialized, family arrangement is being promoted. The latter is the middle way between the old dependencies and the new “independence.” This makes for complexity and even ambiguity in policy, a manifestation of which is that reform within countries involves concurrent moves in several directions.

Cold-formed steel sections with web openings subjected to web crippling under two-flange loading conditions - part I: Tests and finite element analysis

The results of 82 web crippling tests are presented, with 20 tests conducted on channel sections without web openings and 62 tests conducted on channel sections with web openings. The tests consider both end-two-flange and interior-two-flange loading conditions. In the case of the tests with web openings, the hole was located directly under the concentrated load. The concentrated load was applied through bearing plates; the effect of different bearing lengths is investigated. In addition, the cases of both flanges fastened and unfastened to the support is considered. A non-linear elasto-plastic finite element model is described, and the results compared against the laboratory test results; a good agreement was obtained in terms of both strength and failure modes.

Sequential versus non-sequential double ionization in strong laser fields

<p> The recollision model has been applied to separate the probability for double ionization into contributions from electron-impact ionization and electron-impact excitation for intensities at which the dielectronic interaction is important for generating double ionization. For a wavelength of 780 am, electron-impact excitation dominates just above the threshold intensity for double ionization, approximate to 1.2 x 10(14) W cm(-2), with electron-impact ionization becoming more important for higher intensities. For a wavelength of 390 nm, the ratio between electron-impact ionization and electron-impact excitation remains fairly constant for all intensities above the threshold intensity for double ionization, approximate to 6 x 10(14) W cm(-2). The results point to an explanation of the experimental results, but more detailed calculations on the behaviour of excited He+ ions are required.</p>

Non-competitive phenotypic differences can have a strong effect on ideal free distributions

1. We present a model of the ideal free distribution (IFD) where differences between phenotypes other than those involved in direct competition for resources are considered. We show that these post-acquisitional differences can have a dramatic impact on the predicted distributions of individuals.

2. Specifically, we predict that, when the relative abilities of phenotypes are independent of location, there will be a continuum of mixed evolutionarily stable strategy (ESS) distributions (where all phenotypes are present in all patches).

3, When the relative strengths of the post-acquisitional trait in the two phenotypes differ between patches, however, we predict only a single ESS at equilibrium. Further, this distribution may be fully or partially segregated (with the distribution of at least one phenotype being spatially restricted) but it will never be mixed.

4, Our results for post-acquisitional traits mirror those of Parker (1982) for direct competitive traits. This comparison illustrates that it does not matter whether individual differences are expressed before or after competition for resources, they will still exert considerable influence on the distribution of the individuals concerned.

Efficient excitation of dielectric-loaded surface plasmon-polariton waveguide modes at telecommunication wavelengths

The excitation of surface plasmon-polariton (SPP) waveguide modes in subwavelength dielectric ridges deposited on a thin gold film has been characterized and optimized at telecommunication wavelengths. The experimental data on the electromagnetic mode structure obtained using scanning near-field optical microscopy have been directly compared to full vectorial three-dimensional finite element method simulations. Two excitation geometries have been investigated where SPPs are excited outside or inside the dielectric tapered region adjoint to the waveguide. The dependence of the efficiency of the SPP guided mode excitation on the taper opening angle has been measured and modeled. Single-mode guiding and strong lateral mode confinement of dielectric-loaded SPP waveguide modes have been characterized with the near-field measurements and compared to the effective-index method model.

A Physically-Constrained Source Model For FDTD Acoustic Simulation

The Finite Difference Time Domain (FDTD) method is becoming increasingly popular for room acoustics simulation. Yet, the literature on grid excitation methods is relatively sparse, and source functions are traditionally implemented in a hard or additive form
using arbitrarily-shaped functions which do not necessarily obey the physical laws of sound generation. In this paper we formulate
a source function based on a small pulsating sphere model. A physically plausible method to inject a source signal into the grid
is derived from first principles, resulting in a source with a near-flat spectrum that does not scatter incoming waves. In the final
discrete-time formulation, the source signal is the result of passing a Gaussian pulse through a digital filter simulating the dynamics of the pulsating sphere, hence facilitating a physically correct means to design source functions that generate a prescribed sound field.

Measles immune suppression:lessons from the Macaque Model

Measles remains a significant childhood disease, and is associated with a transient immune suppression. Paradoxically, measles virus (MV) infection also induces robust MV-specific immune responses. Current hypotheses for the mechanism underlying measles immune suppression focus on functional impairment of lymphocytes or antigen-presenting cells, caused by infection with or exposure to MV. We have generated stable recombinant MVs that express enhanced green fluorescent protein, and remain virulent in non-human primates. By performing a comprehensive study of virological, immunological, hematological and histopathological observations made in animals euthanized at different time points after MV infection, we developed a model explaining measles immune suppression which fits with the "measles paradox". Here we show that MV preferentially infects CD45RA - memory T-lymphocytes and follicular B-lymphocytes, resulting in high infection levels in these populations. After the peak of viremia MV-infected lymphocytes were cleared within days, followed by immune activation and lymph node enlargement. During this period tuberculin-specific T-lymphocyte responses disappeared, whilst strong MV-specific T-lymphocyte responses emerged. Histopathological analysis of lymphoid tissues showed lymphocyte depletion in the B- and T-cell areas in the absence of apoptotic cells, paralleled by infiltration of T-lymphocytes into B-cell follicles and reappearance of proliferating cells. Our findings indicate an immune-mediated clearance of MV-infected CD45RA - memory T-lymphocytes and follicular B-lymphocytes, which causes temporary immunological amnesia. The rapid oligoclonal expansion of MV-specific lymphocytes and bystander cells masks this depletion, explaining the short duration of measles lymphopenia yet long duration of immune suppression. © 2012 de Vries et al.

A progressive failure model for composite laminates subjected to low velocity impact damage

This paper presents a 3-D failure model for predicting the dynamic material response of composite laminates under impact loading. The formulation is based on the Continuum Damage Mechanics (CDM) approach and enables the control of the energy dissipation associated with each failure mode regardless of mesh refinement and fracture plane orientation. Internal thermodynamically irreversible damage variables were defined in order to quantify damage concentration associated with each possible failure mode and predict the gradual stiffness reduction during the impact damage process. The material model has been implemented into LS-DYNA explicit finite element code within solid elements and it has proven to be capable of reproducing experimental results with good accuracy in terms of static/dynamic responses, absorbed energy and extent of damage.

Fracture mechanics using a 3D composite element

The formulation of a 3D composite element and its use in a mixed-mode fracture mechanics example is presented. This element, like a conventional 3D finite element, has three degrees of freedom per node although, like a plate element, the strains are defined in the local directions of the mid-plane surface. The stress-strain property matrix of this element was modified to decouple the stresses in the local mid-plane and the strains normal to this plane thus preventing the element from being too stiff in bending. A main advantage of this formulation is the ability to model a laminate with a single 3D element. The motivation behind this work was to improve the computational efficiency associated with the calculation of strain energy release rates in laminated structures. A comparison of mixed-mode results using different elements of an in-house finite element package are presented. Good agreement was achieved between the results obtained using the new element and coventional higher-order elements

A simple non-linear global-local finite element methodology for composite structures

A simple non-linear global-local finite element methodology is presented. A global coarse model, using 2-D shell elements, is solved non-linearly and the displacements and rotations around a region of interest are applied, as displacement boundary conditions, to a refined local 3-D model using Kirchhoff plate assumptions. The global elements' shape functions are used to interpolate between nodes. The local model is then solved non-linearly with an incremental scheme independent of that used for the global model.

3D deflagration simulations leaving bound remnants:A model for 2002cx-like Type Ia supernovae

2002cx-like supernovae are a sub-class of sub-luminous Type Ia supernovae (SNe). Their light curves and spectra are characterized by distinct features that indicate strong mixing of the explosion ejecta. Pure turbulent deflagrations have been shown to produce such mixed ejecta. Here, we present hydrodynamics, nucleosynthesis and radiative-transfer calculations for a 3D full-star deflagration of a Chandrasekhar-mass white dwarf. Our model is able to reproduce the characteristic observational features of SN 2005hk (a prototypical 2002cx-like supernova), not only in the optical, but also in the near-infrared. For that purpose we present, for the first time, five near-infrared spectra of SN 2005hk from -0.2 to 26.6 d with respect to B-band maximum. Since our model burns only small parts of the initial white dwarf, it fails to completely unbind the white dwarf and leaves behind a bound remnant of ~1.03Mconsisting mainly of unburned carbon and oxygen, but also enriched by some amount of intermediate-mass and iron-group elements from the explosion products that fall back on the remnant.We discuss possibilities for detecting this bound remnant and how it might influence the late-time observables of 2002cx-like SNe. © 2013 The Authors Published by Oxford University Press on behalf of the Royal Astronomical Society.

Strong electrostatic interaction effect on modulational stability of dust acoustic waves

The modulational instability of dust-acoustic waves is investigated, relying on a recently proposed model for strong electrostatic interactions between the highly charged dust particles. The resulting effect on the occurrence (threshold, growth rate) of modulational instability is investigated. Our results can in principle be tested experimentally.