High-Speed Fully Homomorphic Encryption Over the Integers

A fully homomorphic encryption (FHE) scheme is envisioned as a key cryptographic tool in building a secure and reliable cloud computing environment, as it allows arbitrary evaluation of a ciphertext without revealing the plaintext. However, existing FHE implementations remain impractical due to very high time and resource costs. To the authors’ knowledge, this paper presents the first hardware implementation of a full encryption primitive for FHE over the integers using FPGA technology. A large-integer multiplier architecture utilising Integer-FFT multiplication is proposed, and a large-integer Barrett modular reduction module is designed incorporating the proposed multiplier. The encryption primitive used in the integer-based FHE scheme is designed employing the proposed multiplier and modular reduction modules. The designs are verified using the Xilinx Virtex-7 FPGA platform. Experimental results show that a speed improvement factor of up to 44 is achievable for the hardware implementation of the FHE encryption scheme when compared to its corresponding software implementation. Moreover, performance analysis shows further speed improvements of the integer-based FHE encryption primitives may still be possible, for example through further optimisations or by targeting an ASIC platform.

Synthesisable FFT cores

Methods are presented for developing synthesisable FFT cores. These are based on a modular approach in which parameterisable blocks are cascaded to implement the computations required across a range of typical FFT signal flow graphs. The underlying architectural approach combines the use of a digital serial data organisation with generic commutator blocks to produce systems that offer 100% processor utilisation with storage requirements less than previous designs. The approach has been used to create generators for the automated synthesis of FFT cores that are portable across a broad range of silicon technologies. Resulting chip designs are competitive with manual methods but with significant reductions in design times.

Characterizing wear processes on orthopaedic materials using scanning probe microscopy

The operational lifetime of hip replacement prostheses can be severely limited due to the occurrence of excessive wear at the load-bearing interfaces. The aim of this study was to investigate how the surface topography of articulating counterfaces evolves over the duration of a laboratory wear run. It was observed that modular stainless steel femoral heads wearing against ultrahigh molecular weight polyethylene (UHMWPE) can themselves be subject to wearing. A comparison with retrieved in vivo-aged femoral heads shows many topographical similarities: in a qualitative sense, scratching and pitting are evident on laboratory and in vivo-worn femoral heads; quantitatively, roughness comparisons between the new and worn devices are seen to increase typically by a factor of 4 after laboratory wearing. The observations suggest that a particular wear mode, namely third-body wear, is responsible for the increased roughness. It is conjectured that third bodies might arise through surface fatigue wear on the metal counterface, Wear debris is also observed to have been generated from the polymer surface, creating rounded debris with sizes predominantly in the range 0.4-0.8 microns: dimensions that are comparable to values previously reported for in vivo generated debris.

Parker Morris and the economies of the Fordist house

The Parker Morris report of 1961 attempted, through the application of scientific principles, to define the minimum living space standards needed to accommodate household activities. But while early modernist research into ideas of existenzminimum were the work of avant-garde architects and thinkers, this report was commissioned by the British State. This normalization of scientific enquiry into space can be considered not only a response to new conditions in the mass production of housing – economies of scale, prefabrication, system-building and modular coordination – but also to the post-war boom in consumer goods. The domestic interior was assigned a key role as a privileged site of mass consumption as the production and micro-management of space in Britain became integral to the development of a planned national economy underpinned by Fordist principles. The apparently placeless and scale-less diagrams executed by Gordon Cullen to illustrate Parker Morris emblematize these relationships. Walls dissolve as space flows from inside to outside in a homogenized and ephemeral landscape whose limits are perhaps only the boundaries of the nation state and the circuits of capital.

Local operator multipliers and positivity

We establish an unbounded version of Stinespring's Theorem and a lifting result for Stinespring representations of completely positive modular maps defined on the space of all compact operators. We apply these results to study positivity for Schur multipliers. We characterise positive local Schur multipliers, and provide a description of positive local Schur multipliers of Toeplitz type. We introduce local operator multipliers as a non-commutative analogue of local Schur multipliers, and characterise them extending both the characterisation of operator multipliers from [16] and that of local Schur multipliers from [27]. We provide a description of the positive local operator multipliers in terms of approximation by elements of canonical positive cones.

Experimental linear-optics simulation of multipartite non-locality in the ground state of a quantum Ising ring

Critical phenomena involve structural changes in the correlations of its constituents. Such changes can be reproduced and characterized in quantum simulators able to tackle medium-to-large-size systems. We demonstrate these concepts by engineering the ground state of a three-spin Ising ring by using a pair of entangled photons. The effect of a simulated magnetic field, leading to a critical modification of the correlations within the ring, is analysed by studying two- and three-spin entanglement. In particular, we connect the violation of a multipartite Bell inequality with the amount of tripartite entanglement in our ring.

Simulation using novel equipment designed to explain spirometric abnormalities in respiratory disease enhances learning in higher cognitive domains

Simulation of disorders of respiratory mechanics shown by spirometry provides insight into the pathophysiology of disease but some clinically important disorders have not been simulated and none have been formally evaluated for education. We have designed simple mechanical devices which, along with existing simulators, enable all the main dysfunctions which have diagnostic value in spirometry to be simulated and clearly explained with visual and haptic feedback. We modelled the airways as Starling resistors by a clearly visible mechanical action to simulate intra- and extra-thoracic obstruction. A narrow tube was used to simulate fixed large airway obstruction and inelastic bands to simulate restriction. We hypothesized that using simulators whose action explains disease promotes learning especially in higher domain educational objectives. The main features of obstruction and restriction were correctly simulated. Simulation of variable extra-thoracic obstruction caused blunting and plateauing of inspiratory flow, and simulation of intra-thoracic obstruction caused limitation of expiratory flow with marked dynamic compression. Multiple choice tests were created with questions allocated to lower (remember and understand) or higher cognitive domains (apply, analyse and evaluate). In a cross-over design, overall mean scores increased after 1½ h simulation spirometry (43-68 %, effect size 1.06, P < 0.0001). In higher cognitive domains the mean score was lower before and increased further than lower domains (Δ 30 vs 20 %, higher vs lower effect size 0.22, P < 0.05). In conclusion, the devices successfully simulate various patterns of obstruction and restriction. Using these devices medical students achieved marked enhancement of learning especially in higher cognitive domains.

A-level Mathematics Options – Views of Secondary-level Teachers

The A-level Mathematics qualification is based on a compulsory set of pure maths modules and a selection of applied maths modules with the pure maths representing two thirds of the assessment. The applied maths section includes mechanics, statistics and (sometimes) decision maths. A combination of mechanics and statistics tends to be the most popular choice by far. The current study aims to understand how maths teachers in secondary education make decisions regarding the curriculum options and offers useful insight to those currently designing the new A-level specifications.

Semi-structured interviews were conducted with A-level maths teachers representing 27 grammar schools across Northern Ireland. Teachers were generally in agreement regarding the importance of pure maths and the balance between pure and applied within the A-level maths curriculum. A wide variety of opinions existed concerning the applied options. While many believe that the basic mechanics-statistics (M1-S1) combination is most accessible, it was also noted that the M1-M2 combination fits neatly alongside A-level physics. Lack of resources, timetabling constraints and competition with other subjects in the curriculum hinder uptake of A-level Further Maths.

Teachers are very conscious of the need to obtain high grades to benefit both their pupils and the school’s reputation. The move to a linear assessment system in England while Northern Ireland retains the modular system is likely to cause some schools to review their choice of exam board although there is disagreement as to whether a modular or linear system is more advantageous for pupils. The upcoming change in the specification offers an opportunity to refresh the assessment also and reduce the number of leading questions. However, teachers note that there are serious issues with GCSE maths and these have implications for A-level.

The structure of an unconventional HD-GYP protein from Bdellovibrio reveals the roles of conserved residues in this class of cyclic-di-GMP phosphodiesterases

UNLABELLED: Cyclic-di-GMP is a near-ubiquitous bacterial second messenger that is important in localized signal transmission during the control of various processes, including virulence and switching between planktonic and biofilm-based lifestyles. Cyclic-di-GMP is synthesized by GGDEF diguanylate cyclases and hydrolyzed by EAL or HD-GYP phosphodiesterases, with each functional domain often appended to distinct sensory modules. HD-GYP domain proteins have resisted structural analysis, but here we present the first structural representative of this family (1.28 Å), obtained using the unusual Bd1817 HD-GYP protein from the predatory bacterium Bdellovibrio bacteriovorus. Bd1817 lacks the active-site tyrosine present in most HD-GYP family members yet remains an excellent model of their features, sharing 48% sequence similarity with the archetype RpfG. The protein structure is highly modular and thus provides a basis for delineating domain boundaries in other stimulus-dependent homologues. Conserved residues in the HD-GYP family cluster around a binuclear metal center, which is observed complexed to a molecule of phosphate, providing information on the mode of hydroxide ion attack on substrate. The fold and active site of the HD-GYP domain are different from those of EAL proteins, and restricted access to the active-site cleft is indicative of a different mode of activity regulation. The region encompassing the GYP motif has a novel conformation and is surface exposed and available for complexation with binding partners, including GGDEF proteins.

IMPORTANCE: It is becoming apparent that many bacteria use the signaling molecule cyclic-di-GMP to regulate a variety of processes, most notably, transitions between motility and sessility. Importantly, this regulation is central to several traits implicated in chronic disease (adhesion, biofilm formation, and virulence gene expression). The mechanisms of cyclic-di-GMP synthesis via GGDEF enzymes and hydrolysis via EAL enzymes have been suggested by the analysis of several crystal structures, but no information has been available to date for the unrelated HD-GYP class of hydrolases. Here we present the multidomain structure of an unusual member of the HD-GYP family from the predatory bacterium Bdellovibrio bacteriovorus and detail the features that distinguish it from the wider structural family of general HD fold hydrolases. The structure reveals how a binuclear iron center is formed from several conserved residues and provides a basis for understanding HD-GYP family sequence requirements for c-di-GMP hydrolysis.

HpMC: An Energy- Aware Management System for Multi-Level Memory Architectures

DRAM technology faces density and power challenges to increase capacity because of limitations of physical cell design. To overcome these limitations, system designers are exploring alternative solutions that combine DRAM and emerging NVRAM technologies. Previous work on heterogeneous memories focuses, mainly, on two system designs: PCache, a hierarchical, inclusive memory system, and HRank, a flat, non-inclusive memory system. We demonstrate that neither of these designs can universally achieve high performance and energy efficiency across a suite of HPC workloads. In this work, we investigate the impact of a number of multilevel memory designs on the performance, power, and energy consumption of applications. To achieve this goal and overcome the limited number of available tools to study heterogeneous memories, we created HMsim, an infrastructure that enables n-level, heterogeneous memory studies by leveraging existing memory simulators. We, then, propose HpMC, a new memory controller design that combines the best aspects of existing management policies to improve performance and energy. Our energy-aware memory management system dynamically switches between PCache and HRank based on the temporal locality of applications. Our results show that HpMC reduces energy consumption from 13% to 45% compared to PCache and HRank, while providing the same bandwidth and higher capacity than a conventional DRAM system.

Integrative analysis of chemo-transcriptomic profiles for drug-feature specific gene expression signatures

One of the major challenges in systems biology is to understand the complex responses of a biological system to external perturbations or internal signalling depending on its biological conditions. Genome-wide transcriptomic profiling of cellular systems under various chemical perturbations allows the manifestation of certain features of the chemicals through their transcriptomic expression profiles. The insights obtained may help to establish the connections between human diseases, associated genes and therapeutic drugs. The main objective of this study was to systematically analyse cellular gene expression data under various drug treatments to elucidate drug-feature specific transcriptomic signatures. We first extracted drug-related information (drug features) from the collected textual description of DrugBank entries using text-mining techniques. A novel statistical method employing orthogonal least square learning was proposed to obtain drug-feature-specific signatures by integrating gene expression with DrugBank data. To obtain robust signatures from noisy input datasets, a stringent ensemble approach was applied with the combination of three techniques: resampling, leave-one-out cross validation, and aggregation. The validation experiments showed that the proposed method has the capacity of extracting biologically meaningful drug-feature-specific gene expression signatures. It was also shown that most of signature genes are connected with common hub genes by regulatory network analysis. The common hub genes were further shown to be related to general drug metabolism by Gene Ontology analysis. Each set of genes has relatively few interactions with other sets, indicating the modular nature of each signature and its drug-feature-specificity. Based on Gene Ontology analysis, we also found that each set of drug feature (DF)-specific genes were indeed enriched in biological processes related to the drug feature. The results of these experiments demonstrated the pot- ntial of the method for predicting certain features of new drugs using their transcriptomic profiles, providing a useful methodological framework and a valuable resource for drug development and characterization.

Of no fixed form: The Irish Pavilion at Venice 2014 and beyond

This paper explores the theme of exhibiting architectural research through a particular example, the development of the Irish pavilion for the 14th architectural biennale, Venice 2014. Responding to Rem Koolhaas’s call to investigate the international absorption of modernity, the Irish pavilion became a research project that engaged with the development of the architectures of infrastructure in Ireland in the twentieth and twenty-first centuries. Central to this proposition was that infrastructure is simultaneously a technological and cultural construct, one that for Ireland occupied a critical position in the building of a new, independent post-colonial nation state, after 1921.

Presupposing infrastructure as consisting of both visible and invisible networks, the idea of a matrix become a central conceptual and visual tool in the curatorial and design process for the exhibition and pavilion. To begin with this was a two-dimensional grid used to identify and order what became described as a series of ten ‘infrastructural episodes’. These were determined chronologically across the decades between 1914 and 2014 and their spatial manifestations articulated in terms of scale: micro, meso and macro. At this point ten academics were approached as researchers. Their purpose was twofold, to establish the broader narratives around which the infrastructures developed and to scrutinise relevant archives for compelling visual material. Defining the meso scale as that of the building, the media unearthed was further filtered and edited according to a range of categories – filmic/image, territory, building detail, and model – which sought to communicate the relationship between the pieces of architecture and the larger systems to which they connect. New drawings realised by the design team further iterated these relationships, filling in gaps in the narrative by providing composite, strategic or detailed drawings.

Conceived as an open-ended and extendable matrix, the pavilion was influenced by a series of academic writings, curatorial practices, artworks and other installations including: Frederick Kiesler’s City of Space (1925), Eduardo Persico and Marcello Nizzoli’s Medaglio d’Oro room (1934), Sol Le Witt’s Incomplete Open Cubes (1974) and Rosalind Krauss’s seminal text ‘Grids’ (1979). A modular frame whose structural bays would each hold and present an ‘episode’, the pavilion became both a visual analogue of the unseen networks embodying infrastructural systems and a reflection on the predominance of framed structures within the buildings exhibited. Sharing the aspiration of adaptability of many of these schemes, its white-painted timber components are connected by easily-dismantled steel fixings. These and its modularity allow the structure to be both taken down and re-erected subsequently in different iterations. The pavilion itself is, therefore, imagined as essentially provisional and – as with infrastructure – as having no fixed form. Presenting archives and other material over time, the transparent nature of the space allowed these to overlap visually conveying the nested nature of infrastructural production. Pursuing a means to evoke the qualities of infrastructural space while conveying a historical narrative, the exhibition’s termination in the present is designed to provoke in the visitor, a perceptual extension of the matrix to engage with the future.

Parker Morris and the Fordist House

6.00 pm. If people like watching T.V. while they are eating their evening meal, space for a low table is needed (Ministry of Housing and Local Government, Space in the Home, 1963, p. 4).

This paper re-examines the 1961 Parker Morris report on housing standards in Britain. It explores the origins, scope, text and iconography of the report and suggests that these not only express a particularly modernist conception of space but one which presupposed very specific economic conditions and geographies.

Also known as Homes for Today and Tomorrow Parker Morris attempted, through the application of scientific principles, to define the minimum living space standards needed to accommodate household activities. But while early modernist research into notions of existenzminimum were the work of avant-garde architects and thinkers, Homes for Today and Tomorrow and its sister design manual Space in the Home were commissioned by the British State. This normalization of scientific enquiry into space can be considered not only as a response to new conditions in the mass production of housing – economies of scale, prefabrication, system-building and modular coordination – but also to the post-war boom in consumer goods. In this, it is suggested that the domestic interior was assigned a key role as a privileged site of mass consumption as the production and micro-management of space in Britain became integral to the development of a planned national economy underpinned by Fordist principles. Parker Morris, therefore, sought to accommodate activities which were pre-determined not so much by traditional social or familial ties but rather by recently introduced commodities such as the television set, white goods, table tennis tables and train sets. This relationship between the domestic interior and the national economy are emblematized by the series of placeless and scale-less diagrams executed by Gordon Cullen in Space in the Home. Here, walls dissolve as space flows from inside to outside in a homogenized and ephemeral landscape whose limits are perhaps only the boundaries of the nation state and the circuits of capital.

In Britain, Parker Morris was the last explicit State-sponsored attempt to prescribe a normative spatial programme for national living. The calm neutral efficiency of family-life expressed in its diagrams was almost immediately problematised by the rise of 1960s counter-culture, the feminist movement and the oil crisis of 1972 which altered perhaps forever the spatial, temporal and economic conditions it had taken for granted. The debate on space-standards, however, continues.

Prostate cancer radiotherapy: potential applications of metal nanoparticles for imaging and therapy

Prostate cancer (CaP) is the most commonly diagnosed cancer in males. There have been dramatic technical advances in radiotherapy delivery, enabling higher doses of radiotherapy to primary cancer, involved lymph nodes and oligometastases with acceptable normal tissue toxicity. Despite this, many patients relapse following primary radical therapy, and novel treatment approaches are required. Metal nanoparticles are agents that promise to improve diagnostic imaging and image-guided radiotherapy and to selectively enhance radiotherapy effectiveness in CaP. We summarize current radiotherapy treatment approaches for CaP and consider pre-clinical and clinical evidence for metal nanoparticles in this condition.

Prostate cancer (CaP) is the most commonly diagnosed cancer in males and is responsible for more than 10,000 deaths each year in the UK.1 Technical advances in radiotherapy delivery, including image-guided intensity-modulated radiotherapy (IG-IMRT), have enabled the delivery of higher radiation dose to the prostate, which has led to improved biochemical control. Further improvements in cancer imaging during radiotherapy are being developed with the advent of MRI simulators and MRI linear accelerators.2–4

Nanotechnology promises to deliver significant advancements across numerous disciplines.5 The widest scope of applications are from the biomedical field including exogenous gene/drug delivery systems, advanced biosensors, targeted contrast agents for diagnostic applications and as direct therapeutic agents used in combination with existing treatment modalities.6–11 This diversity of application is especially evident within cancer research, with a myriad of experimental anticancer strategies currently under investigation.

This review will focus specifically on the potential of metal-based nanoparticles to augment the efficacy of radiotherapy in CaP, a disease where radiotherapy constitutes a major curative treatment modality.12 Furthermore, we will also address the clinical state of the art for CaP radiotherapy and consider how these treatments could be best combined with nanotherapeutics to improve cancer outcomes.

Current understanding of learning psychomotor skills and the impact on teaching laparoscopic surgical skills

Key content
- Trainees face many challenges in learning the skill set required to perform laparoscopic surgery.
- The time spent in the operating room has been detrimentally impacted upon since the implementation of the European Working Time Directive. In order to address the deficit, surgical educators have looked to the benefits enjoyed in the aviation and sports industries in using simulation training.

Learning objectives
- To summarise the current understanding of the neuropsychological basis of learning a psychomotor skill.
- To clarify factors that influence the acquisition of these skills.
- To summarise how this information can be used in teaching and assessment of laparoscopic skills.

Ethical issues
- The use of virtual reality simulators may be able to form a part of the aptitude assessment in the selection process, in order to identify trainees with the desired attributes to progress into the training programmes. However, as skill improves with practice, is it ethical to exclude novices with poor initial performance assessment before allowing them the opportunities to improve?