Arsenic Contents in Spanish Infant Rice, Pureed Infant Foods, and Rice

It seems there is a positive correlation between rice content and arsenic level in foods. This is of extraordinary importance for infants below 1 y of age because their diet is very limited and in some cases is highly dependent on rice-based products; this is particularly true for infants with the celiac disease because they have no other option than consume gluten-free products, such as rice or corn. Arsenic contents were significantly higher (P <0.001) in gluten-free infant rice (0.057 mg kg-1) than in products with gluten, based on a mixture of cereals (0.024 mg kg-1). Besides, especial precaution must be taken when preparing rice-based products at home, because arsenic content in Spanish rice was high, with levels being above 0.3 mg kg-1 in some cases.

Scientific standards for human intervention trials evaluating health benefits of foods, and their application to infants, children and adolescents

Associations between the consumption of particular foods and health outcomes may be indicated by observational studies. However, intervention trials that evaluate the health benefits of foods provide the strongest evidence to support dietary recommendations for health. Thus, it is important that these trials are carried out safely, and to high scientific standards. Accepted standards for the reporting of the health benefits of pharmaceutical and other medical interventions have been provided by the Consolidated Standards of Reporting Trials (CONSORT) statement. However, there are no generally accepted standards for trials to evaluate the health benefits of foods. Trials with foods differ from medical trials in issues related to safety, ethics, research governance and practical implementation. Furthermore, these important issues can deter the conduct of both medical and nutrition trials in infants, children and adolescents. This paper provides standards for the planning, design, conduct, statistical analysis and interpretation of human intervention trials to evaluate the health benefits of foods that are based on the CONSORT guidelines, and outlines the key issues that need to be addressed in trials in participants in the paediatric age range.

Co-exposures of aflatoxins with deoxynivalenol and fumonisins from maize based complementary foods in Rombo, Northern Tanzania

Children consuming maize based foods in Tanzania may be exposed to multiple mycotoxins. We estimated co-exposures of aflatoxins with Deoxynivalenol (DON) and fumonisins for children in rural Tanzania. Food consumption by the children was estimated by twice administering a 24 h dietary recall questionnaire to mothers of 18-24 months old children in Kikelelwa village. Each mother also; provided a sample of maize based flour used for feeding her child in the previous day. Each child's body weight (bw) was measured by following standard procedures. Aflatoxins, DON and fumonisins were determined in each sample using validated HPLC methods. Exposures for a mycotoxin were estimated by multiplying flour consumption (g/child/kgbw/day) by its contamination (mu g/kg). Complete data were obtained for 41 children. Maize flour consumption ranged from 16 to 254 g/child/day. Thirteen (32%) of the 41 children consumed flour with detectable aflatoxin levels (range, 0.11-386 mu g/kg), resulting in exposures from 1 to 786 ng/kg bw/day. All these children exceeded the aflatoxins exposure of concern (0.017 ng/kg bw/day). Eighteen (44%) of the children consumed flour with detectable DON levels (57-825 mu g/kg) and 34(83%), detectable fumonisins levels (63-2284 mu g/kg), resulting in respective exposure ranges of 0.38-8.87 mu g/kg bw/day and 0.19-26.37 mu g/kg bw/day. Twelve (66%) of the DON exposed children and 56% of the fumonisins exposed children exceeded the respective provisional tolerable daily intakes of 1 mu g/kg bw and 2 ng/kg bw. Co-exposures for aflatoxins with both DON and fumonsins were determined in 10% of the 41 children. Co-exposures of aflatoxins with fumonisins alone were found in 29% and of fumonisins with DON alone in 41% of the children. The study showed that children consuming maize based complementary foods in Northern Tanzania are at a risk of exposure to multiple mycotoxins. We recommend adoption of appropriate measures to minimize exposures of multiple mycotoxins in Tanzania. (C) 2014 Elsevier Ltd. All rights reserved.

Energy compensation in the real world: Good compensation for small portions of chocolate and biscuits over short time periods in complicit consumers using commercially available foods

While investigations using covert food manipulations tend to suggest that individuals are poor at adjusting for previous energy intake, in the real world adults rarely consume foods of which they are ill-informed. This study investigated the impact in fully complicit consumers of consuming commercially available dark chocolate, milk chocolate, sweet biscuits and fruit bars on subsequent appetite. Using a repeated measures design, participants received four small portions (4 × 10-11 g) of either dark chocolate, milk chocolate, sweet biscuits, fruit bars or no food throughout five separate study days (counterbalanced in order), and test meal intake, hunger, liking and acceptability were measured. Participants consumed significantly less at lunch following dark chocolate, milk chocolate and sweet biscuits compared to no food (smallest t(19) = 2.47, p = 0.02), demonstrating very good energy compensation (269-334%). No effects were found for fruit bars (t(19) = 1.76, p = 0.09), in evening meal intakes (F(4,72) = 0.62, p = 0.65) or in total intake (lunch + evening meal + food portions) (F(4,72) = 0.40, p = 0.69). No differences between conditions were found in measures of hunger (largest F(4,76) = 1.26, p = 0.29), but fruit bars were significantly less familiar than all other foods (smallest t(19) = 3.14, p = 0.01). These findings demonstrate good compensation over the short term for small portions of familiar foods in complicit consumers. Findings are most plausibly explained as a result of participant awareness and cognitions, although the nature of these cognitions cannot be discerned from this study. These findings however, also suggest that covert manipulations may have limited transfer to real world scenarios.

High content analysis: A sensitive tool to detect and quantify the cytotoxic, synergistic and antagonistic effects of chemical contaminants in foods

Aflatoxin B1 (AFB1), ochratoxin A (OTA) and fumonisin B1 (FB1) are important mycotoxins in terms of
human exposure via food, their toxicity and regulatory limits that exist worldwide. Mixtures of toxins can frequently be present in foods, however due to the complications of determining their combined toxicity,
legal limits of exposure are determined for single compounds, based on long standing toxicological
techniques. High content analysis (HCA) may be a useful tool to determine total toxicity of complex
mixtures of mycotoxins. Endpoints including cell number (CN), nuclear intensity (NI), nuclear area (NA),
plasma membrane permeability (PMP), mitochondrial membrane potential (MMP) and mitochondrial
mass (MM) were compared to the conventional 3-(4,5-dimethylthiazol-2-yl)-2,5 diphenyltetrazolium
bromide (MTT) and neutral red (NR) endpoints in MDBK cells. Individual concentrations of each
mycotoxin (OTA 3mg/ml, FB1 8mg/ml and AFB11.28mg/ml) revealed no cytotoxicity with MTTor NR but
HCA showed significant cytotoxic effects up to 41.6% (p0.001) and 10.1% (p0.05) for OTA and AFB1,
respectively. The tertiary mixture (OTA 3mg/ml, FB1 8mg/ml and AFB1 1.28mg/ml) detected up to 37.3%
and 49.8% more cytotoxicity using HCA over MTT and NR, respectively. Whilst binary combinations of
OTA (3mg/ml) and FB1 (8mg/ml) revealed synergistic interactions using HCA (MMP, MM, NI endpoints)
not detected using MTT or NR. HCA is a highly novel and sensitive tool that could substantially help
determine future regulatory limits, for single and combined toxins present in food, ensuring legislation is based on true risks to human health exposure.

STARTEC: Novel processing technologies in the development of a decision support tool to ensure safe and nutritious Ready-To-Eat foods

Ready-to-eat (RTE) foods can be readily consumed with minimum or without any further preparation; their processing is complex—involving thorough decontamination processes— due to their composition of mixed ingredients. Compared with conventional preservation technologies, novel processing technologies can enhance the safety and quality of these complex products by reducing the risk of pathogens and/ or by preserving related health-promoting compounds. These novel technologies can be divided into two categories: thermal and non-thermal. As a non-thermal treatment, High Pressure Processing is a very promising novel methodology that can be used even in the already packaged RTE foods. A new “volumetric” microwave heating technology is an interesting cooking and decontamination method directly applied to foods. Cold Plasma technology is a potential substitute of chlorine washing in fresh vegetable decontamination. Ohmic heating is a heating method applicable to viscous products but also to meat products. Producers of RTE foods have to deal with challenging decisions starting from the ingredients suppliers to the distribution chain. They have to take into account not only the cost factor but also the benefits and food products’ safety and quality. Novel processing technologies can be a valuable yet large investment for several SME food manufacturers, but they need support data to be able to make adequate decisions. Within the FP7 Cooperation funded by the European Commission, the STARTEC project aims to develop an IT decision supporting tool to help food business operators in their risk assessment and future decision making when producing RTE foods with or without novel preservation technologies.

Using Flory-Huggins phase diagrams as a pre-formulation tool for the production of amorphous solid dispersions; a comparison between hot-melt extrusion and spray drying

Objectives: Amorphous drug forms provide a useful method of enhancing the dissolution performance of poorly water-soluble drugs; however, they are inherently unstable. In this article, we have used Flory–Huggins theory to predict drug solubility and miscibility in polymer candidates, and used this information to compare spray drying and melt extrusion as processes to manufacture solid dispersions.
Method:  Solid dispersions were characterised using a combination of thermal (thermogravimetric analysis and differential scanning calorimetry) and spectroscopic (Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction methods. 
Key Findings: Spray drying permitted generation of amorphous solid dispersions to be produced across a wider drug concentration than melt extrusion. Melt extrusion provided sufficient energy for more intimate mixing to be achieved between drug and polymer, which may improve physical stability. It was also confirmed that stronger drug–polymer interactions might be generated through melt extrusion. Remixing and dissolution of recrystallised felodipine into the polymeric matrices did occur during the modulated differential scanning calorimetry analysis, but the complementary information provided from FTIR confirms that all freshly prepared spray-dried samples were amorphous with the existence of amorphous drug domains within high drug-loaded samples. 
Conclusion: Using temperature–composition phase diagrams to probe the relevance of temperature and drug composition in specific polymer candidates facilitates polymer screening for the purpose of formulating solid dispersions.

Chloride ingress and carbonation in concrete exposed to cyclic wetting and drying

Carbonation and chloride ingress are the two main causes of corrosion in reinforced concrete structures. An investigation to monitor the ingress of chlorides and carbonation during a 9 month wetting and drying exposure regime to simulate conditions in which multiple mode transport mechanisms are active was conducted on a variety of binders. The penetration was evaluated using water and acid soluble chloride profiles, and phenolphthalein indicator. X-ray diffraction was also used to determine the presence of bound chlorides and carbonation. The results indicated that acid extraction of chlorides is quantitatively reliable and practical for assessing penetration. The effect of carbonation on binding capability was observed and the relative quantity of chlorides also showed a correlation with the amount of chlorides bound in the form of Friedel’s salt.

Evaporative Moisture Loss from Heterogeneous Stone: Material- Environment Interactions During Drying

The complexities of evaporation from structurally and mineralogically heterogeneous sandstone (Locharbriggs Sandstone) are investigated through a laboratory-based experiment in which a variety of environmental conditions are simulated. Data reported demonstrate the significance of material-environment interactions on the spatial and temporal variability of evaporative dynamics. Evaporation from porous stone is determined by the interplay between environmental, material and solution properties, which govern the rate and mode by which water is transmitted to, and subsequently removed from, an evaporating surface. Initially evaporation is marked by high rates of moisture loss controlled by external atmospheric conditions; then, when a critical level of surface moisture content is reached, hydraulic continuity between the stone surface and subsurface is disrupted and the drying front recedes
beneath the surface, evaporation rates decrease and are controlled by the ability of the material to transport water vapour to the surface. Pore size distribution and connectivity, as well as other material properties, control the timing of each stage of evaporation and the nature of the transition.

These experimental data highlight the complexity of evaporation, demonstrating that different regions of the same stone can exhibit varying moisture dynamics during drying and that the rate and nature of evaporative loss differs under different environmental conditions. The results identify the importance of material-environment interactions during drying and that stone micro-environmental conditions cannot be inferred from ambient data alone.
These data have significance for understanding the spatial distribution of stone surface weathering-related morphologies in both the natural and built environments where mineralogical and/or structural heterogeneity creates differences in moisture flux and hence variable drying rates. Such differences may provide a clearer explanation for the initiation and subsequent development of complex weathering responses where areas of significant deterioration can be found alongside areas that exhibit little or no evidence surface breakdown.