Family perceptions of end-of-life care in long-term care facilities

The study examined the utility of the Family Perception of Care Scale (FPCS), which consists of four subscales: resident care, family support, communication, and rooming. This instrument was developed for the purposes of this study. Overall, family members were satisfied with end-of-life care. Satisfaction did not have a statistically significant relationship to family and resident characteristics. Survey questions with the highest number of low satisfaction ratings included staffing levels, updating families and involving them in care planning, and decision making. Family members considered pain control an important priority, followed by comfort care that included caring for a family member with dignity and sensitivity. Family members also valued it when staff were able to inform them that the death of their family member was near. Place of death was significantly associated with satisfaction, family members being more satisfied with end-of-life care when their family member died in the LTC facility as opposed to in hospital.

Exploring Virtual-Channel architecture in FPGA based Networks-on-Chip

A novel Networks-on-Chip (NoC) router architecture specified for FPGA based implementation with configurable Virtual-Channel (VC) is presented. Each pipeline stage of the proposed architecture has been optimized so that low packet propagation latency and reduced hardware overhead can be achieved. The proposed architecture enables high performance and cost effective VC NoC based on-chip system interconnects to be deployed on FPGA.

Investigation of Genetic Variation in Scavenger Receptor Class B, Member 1 (SCARB1) and Association with Serum Carotenoids

Objective: To investigate association of scavenger receptor class B, member 1 (SCARB1) genetic variants with serum carotenoid levels of lutein (L) and zeaxanthin (Z) and macular pigment optical density (MPOD).
Design: A cross-sectional study of healthy adults aged 20 to 70.
Participants: We recruited 302 participants after local advertisement.
Methods: We measured MPOD by customized heterochromatic flicker photometry. Fasting blood samples were taken for serum L and Z measurement by high-performance liquid chromatography and lipoprotein analysis by spectrophotometric assay. Forty-seven single nucleotide polymorphisms (SNPs) across SCARB1 were genotyped using Sequenom technology. Association analyses were performed using PLINK to compare allele and haplotype means, with adjustment for potential confounding and correction for multiple comparisons by permutation testing. Replication analysis was performed in the TwinsUK and Carotenoids in Age-Related Eye Disease Study (CAREDS) cohorts.
Main Outcome Measures: Odds ratios for MPOD area, serum L and Z concentrations associated with genetic variations in SCARB1 and interactions between SCARB1 and gender.
Results: After multiple regression analysis with adjustment for age, body mass index, gender, high-density lipoprotein cholesterol, low-density lipoprotein cholesterol, triglycerides, smoking, and dietary L and Z levels, 5 SNPs were significantly associated with serum L concentration and 1 SNP with MPOD (P<0.01). Only the association between rs11057841 and serum L withstood correction for multiple comparisons by permutation testing (P<0.01) and replicated in the TwinsUK cohort (P = 0.014). Independent replication was also observed in the CAREDS cohort with rs10846744 (P = 2×10-4), an SNP in high linkage disequilibrium with rs11057841 (r2 = 0.93). No interactions by gender were found. Haplotype analysis revealed no stronger association than obtained with single SNP analyses.
Conclusions: Our study has identified association between rs11057841 and serum L concentration (24% increase per T allele) in healthy subjects, independent of potential confounding factors. Our data supports further evaluation of the role for SCARB1 in the transport of macular pigment and the possible modulation of age-related macular degeneration risk through combating the effects of oxidative stress within the retina.
Financial Disclosure(s): Proprietary or commercial disclosures may be found after the references. Ophthalmology 2013;120:1632–1640 © 2013 by the American Academy of Ophthalmology.

The development of a surface defect machining method for hard turning processes

Hard turning (HT) is a material removal process employing a combination of a single point cutting tool and high speeds to machine hard ferrous alloys which exhibit hardness values over 45 HRC. In this paper, a surface defect machining (SDM) method for HT is proposed which harnesses the combined advantages of porosity machining and pulsed laser pre-treatment processing. From previous experimental work, this was shown to provide better controllability of the process and improved quality of the machined surface. While the experiments showed promising results, a comprehensive understanding of this new technique could only be achieved through a rigorous, in depth theoretical analysis. Therefore, an assessment of the SDM technique was carried out using both finite element method (FEM) and molecular dynamics (MD) simulations.
FEM modelling was used to compare the conventional HT of AISI 4340 steel (52 HRC) using an Al2O3 insert with the proposed SDM method. The simulations showed very good agreement with the previously published experimental results. Compared to conventional HT, SDM provided favourable machining outcomes, such as reduced shear plane angle, reduced average cutting forces, improved surface roughness, lower residual stresses on the machined surface, reduced tool–chip interface contact length and increased chip flow velocity. Furthermore, a scientific explanation of the improved surface finish was revealed using a state-of-the-art MD simulation model which suggested that during SDM, a combination of both the cutting action and rough polishing action help improve the machined surface finish.

Formal calibration methodology for CFD models of naturally ventilated indoor environments

Well planned natural ventilation strategies and systems in the built environments may provide healthy and comfortable indoor conditions, while contributing to a significant reduction in the energy consumed by buildings. Computational Fluid Dynamics (CFD) is particularly suited for modelling indoor conditions in naturally ventilated spaces, which are difficult to predict using other types of building simulation tools. Hence, accurate and reliable CFD models of naturally ventilated indoor spaces are necessary to support the effective design and operation of indoor environments in buildings. This paper presents a formal calibration methodology for the development of CFD models of naturally ventilated indoor environments. The methodology explains how to qualitatively and quantitatively verify and validate CFD models, including parametric analysis utilising the response surface technique to support a robust calibration process. The proposed methodology is demonstrated on a naturally ventilated study zone in the library building at the National University of Ireland in Galway. The calibration process is supported by the on-site measurements performed in a normally operating building. The measurement of outdoor weather data provided boundary conditions for the CFD model, while a network of wireless sensors supplied air speeds and air temperatures inside the room for the model calibration. The concepts and techniques developed here will enhance the process of achieving reliable CFD models that represent indoor spaces and provide new and valuable information for estimating the effect of the boundary conditions on the CFD model results in indoor environments. © 2012 Elsevier Ltd.

Alternative treatments to inhibit VEGF in age-related choroidal neovascularisation: 2-year findings of the IVAN randomised controlled trial

Background: Bevacizumab has been suggested to have similar effectiveness to ranibizumab for treatment of neovascular age-related macular degeneration. The Inhibition of VEGF in Age-related choroidal Neovascularisation (IVAN) trial was designed to compare these drugs and different regimens. Here, we report the findings at the prespecified 2-year timepoint. Methods: In a multicentre, 2×2 factorial, non-inferiority randomised trial, we enrolled adults aged at least 50 years with active, previously untreated neovascular age-related macular degeneration and a best corrected distance visual acuity (BCVA) of at least 25 letters from 23 hospitals in the UK. Participants were randomly assigned (1:1:1:1) to intravitreal injections of ranibizumab (0·5 mg) or bevacizumab (1·25 mg) in continuous (every month) or discontinuous (as needed) regimens, with monthly review. Study participants and clinical assessors were masked to drug allocation. Allocation to continuous or discontinuous treatment was masked up to 3 months, at which point investigators and participants were unmasked. The primary outcome was BCVA at 2 years, with a prespecified non-inferiority limit of 3·5 letters. The primary safety outcome was arterial thrombotic event or hospital admission for heart failure. Analyses were by modified intention to treat. This trial is registered, number ISRCTN92166560. Findings: Between March 27, 2008, and Oct 15, 2010, 628 patients underwent randomisation. 18 were withdrawn; 610 received study drugs (314 ranibizumab; 296 bevacizumab) and were included in analyses. 525 participants reached the visit at 2 years: 134 ranibizumab in continuous regimen, 137 ranibizumab in discontinuous regimen, 127 bevacizumab in continuous regimen, and 127 bevacizumab in discontinuous regimen. For BCVA, bevacizumab was neither non-inferior nor inferior to ranibizumab (mean difference -1·37 letters, 95% CI -3·75 to 1·01; p=0·26). Discontinuous treatment was neither non-inferior nor inferior to continuous treatment (-1·63 letters, -4·01 to 0·75; p=0·18). Frequency of arterial thrombotic events or hospital admission for heart failure did not differ between groups given ranibizumab (20 [6%] of 314 participants) and bevacizumab (12 [4%] of 296; odds ratio [OR] 1·69, 95% CI 0·80-3·57; p=0·16), or those given continuous (12 [4%] of 308) and discontinuous treatment (20 [7%] of 302; 0·56, 0·27-1·19; p=0·13). Mortality was lower with continuous than discontinuous treatment (OR 0·47, 95% CI 0·22-1·03; p=0·05), but did not differ by drug group (0·96, 0·46-2·02; p=0·91). Interpretation: Ranibizumab and bevacizumab have similar efficacy. Reduction in the frequency of retreatment resulted in a small loss of efficacy irrespective of drug. Safety was worse when treatment was administered discontinuously. These findings highlight that the choice of anti-VEGF treatment strategy is less straightforward than previously thought.

A theoretical assessment of surface defect machining and hot machining of nanocrystalline silicon carbide

In this paper, a newly proposed machining method named “surface defect machining” (SDM) [Wear, 302, 2013 (1124-1135)] was explored for machining of nanocrystalline beta silicon carbide (3C-SiC) at 300K using MD simulation. The results were compared with isothermal high temperature machining at 1200K under the same machining parameters, emulating ductile mode micro laser assisted machining (µ-LAM) and with conventional cutting at 300 K. In the MD simulation, surface defects were generated on the top of the (010) surface of the 3C-SiC work piece prior to cutting, and the workpiece was then cut along the <100> direction using a single point diamond tool at a cutting speed of 10 m/sec. Cutting forces, sub-surface deformation layer depth, temperature in the shear zone, shear plane angle and friction coefficient were used to characterize the response of the workpiece. Simulation results showed that SDM provides a unique advantage of decreased shear plane angle which eases the shearing action. This in turn causes an increased value of average coefficient of friction in contrast to the isothermal cutting (carried at 1200 K) and normal cutting (carried at 300K). The increase of friction coefficient however was found to aid the cutting action of the tool due to an intermittent dropping in the cutting forces, lowering stresses on the cutting tool and reducing operational temperature. Analysis shows that the introduction of surface defects prior to conventional machining can be a viable choice for machining a wide range of ceramics, hard steels and composites compared to hot machining.

Control of cutaneous antimicrobial peptides by vitamin D3

Constant exposure to a wide variety of microbial pathogens represents a major challenge for our skin. Antimicrobial peptides (AMPs) are mediators of cutaneous innate immunity and protect primarily against microbial infections. Cathelicidins were among the first AMPs identified in human skin and recent evidence suggests that they exert a dual role in innate immune defense: At first, due to their antimicrobial activity they kill pathogens directly. In addition, these peptides initiate a potent host response to infection resulting in cytokine release, inflammation and a cellular response. Disturbed cathelicidin expression and function was observed in several common inflammatory skin diseases, such as psoriasis where cathelicidin peptide converts inert self-DNA and self-RNA into an autoimmune stimulus. In atopic dermatitis decreased levels of cathelicidin facilitating microbial superinfections have been discussed. Furthermore, abnormally processed cathelicidin peptides induce inflammation and a vascular response in rosacea. Until recently, the molecular mechanisms underlying cathelicidin regulation were unknown. Recently, the vitamin D3 pathway was identified as the major regulator of cathelicidin expression. Consequently, vitamin D3 entered the spotlight as an immune modulator with impact on both innate and adaptive immunity. Therapies targeting vitamin D3 signaling may provide new approaches for infectious and inflammatory skin diseases by affecting both innate and adaptive immune functions.

Party agency and the religious-secular cleavage in post-Communist countries: The case of Romania

Research focusing on several post-communist countries has found evidence of social cleavage effects on political behaviour similar to those found in Western Europe. In some post-communist countries, however, social cleavage effects appear far weaker (if at all). To understand why this is the case, I perform a case study of Romania, focusing on the religious–secular cleavage. Drawing upon research that emphasises the role of parties in forming cleavages, I argue that the reason for the absence of social cleavage effects is due to party competition for the same group of voters by parties from opposing ends of the ideological spectrum. By shifting their positions, some parties have prevented the appearance of cleavages by shaping individuals' perceptions of the parties and, in doing so, have even altered individuals' own left–right self-placements.

Rural Migration, Agrarian Change and Institutional Dynamics: Perspectives from the Majority World

Overall, this special issue provides insights into the mutually constitutive ways in which rapid economic development associated with industrialisation drives institutional change, migration and mobility, and, finally, altered relationships between – and conceptions of – rural and urban. The following papers pose important conceptual, normative as well as practical, policy-relevant questions relating to the human consequences of these processes and point to the applications of population research – a central objective of this journal.