An Experimental and Numerical Study of the Static and Fatigue Performance of a Composite Adhesive Repair

Experimental static and fatigue tension-tension tests were carried out on 5HS/RTM6 composite intact coupons and coupons incorporating adhesively-bonded (FM300-2) stepped flush joints. The results show that the adhesive joint, which is widely used in repairs, significantly reduces the static strength as well as the fatigue life of the composite. Both, the static and the fatigue failure of the ‘repaired’ coupons occur at the adhesive joint and involve crack initiation and propagation. The latter is modelled using interface finite elements based on the decohezive zone approach. The material degradation in the interface constitutive law is described by a damage variable, which can evolve due to the applied loads as well as the number of fatigue cycles. The fatigue formulation, based on a published model, is adapted to fit the framework of the pseudotransient formulation that is used as a numerical tool to overcome convergence difficulties. The fatigue model requires three material parameters. Numerical tests show that a single set of these parameters can be used to recover, very accurately, the experimental S-N relationship. Sensitivity studies show that the results are not mesh dependent.

Investigation of moisture condition and Autoclam sensitivity on air permeability measurements for both normal concrete and high performance concrete

While on site measurement of air permeability provides a useful approach for assessing the likely long term durability of concrete structures, no existing test method is capable of effectively determining the relative permeability of high performance concrete (HPC). Lack of instrument sensitivity and the influence of concrete moisture are proposed as two key reasons for this phenomenon. With limited systematic research carried out in this area to date, the aim if this study was to investigate the influence of instrument sensitivity and moisture condition on air permeability measurements for both normal concrete and HPC. To achieve a range of moisture conditions, samples were dried initially for between one and 5 weeks and then sealed in polythene sheeting and stored in an oven at 50 C to internally distribute moisture evenly. Moisture distribution was determined throughout using relative humidity probe and electrical resistance measurements. Concrete air permeability was subsequently measured using standardised air permeability (Autoclam) and water penetration (BS EN: 12390-8) tests to assess differences between the HPCs tested in this study. It was found that for both normal and high performance concrete, the influence of moisture on Autoclam air permeability results could be eliminated by pre-drying (50 ± 1 C, RH 35%) specimens for 3 weeks. While drying for 5 weeks alone was found not to result in uniform internal moisture distributions, this state was achieved by exposing specimens to a further 3 weeks of sealed pre-conditioning at 50 ± 1 C. While the Autoclam test was not able to accurately identify relative HPC quality due to low sensitivity at associated performance levels, an effective preconditioning procedure to obtain reliable air permeability of HPC concretes was identified. © 2013 The Authors

Is Early Warning Effective for the Improvement of Problem Solving and Project Performance?

Since the first launch of the new engineering contract (NEC) in 1993, early warning of problems has been widely recognized as an important approach of proactive management during a construction or engineering project. Is early warning really effective for the improvement of problem solving and project performance? This is a research question that still lacks a good answer. For this reason, an empirical investigation was made in the United Kingdom (U.K.) to answer the question. This study adopts a combination of literature review, expert interview, and questionnaire survey. Nearly 100 questionnaire responses were collected from the U.K. construction industry, based on which the use of early warning under different forms of contract is compared in this paper. Problem solving and project performance are further compared between the projects using early warning and the projects not using early warning. The comparison provides clear evidence for the significant effect of early warning on problem solving and project performance in terms of time, cost, and quality. Subsequently, an input-process-output model is developed in this paper to explore the relationship among early warning, problem solving, and project
performance. All these help construction researchers and practitioners to better understand the role of early warning in ensuring project success.

A-level Mathematics Module Choice and Subsequent Performance in First Year of an Engineering Degree

The A-level Mathematics qualification is based on a compulsory set of pure maths modules and a selection of applied maths modules. The flexibility in choice of applied modules has led to concerns that many students would proceed to study engineering at university with little background in mechanics. A survey of aerospace and mechanical engineering students in our university revealed that a combination of mechanics and statistics (the basic module in both) was by far the most popular choice of optional modules in A-level Mathematics, meaning that only about one-quarter of the class had studied mechanics beyond the basic module within school mathematics. Investigation of student performance in two core, first-year engineering courses, which build on a mechanics foundation, indicated that any benefits for students who studied the extra mechanics at school were small. These results give concern about the depth of understanding in mechanics gained during A-level Mathematics.

Associations between Achievement Goal Orientations and Academic Performance Among Students at a UK Pharmacy School

Objective. To ascertain goal orientations of pharmacy students and establish whether associations exist between academic performance, gender, or year of study. Methods. Goal orientations were assessed using a validated questionnaire. Respondents were categorized as high or low performers based on university grades. Associations and statistical significance were ascertained using parametric and nonparametric tests and linear regression, as appropriate. Results. A response rate of 60.7% was obtained. High performers were more likely to be female than male. The highest mean score was for mastery approach; the lowest for work avoidance. The mean score for work avoidance was significantly greater for low performers than for high performers and for males than for females. First-year students were most likely to have top scores in mastery and performance approaches. Conclusion. It is encouraging that the highest mean score was for mastery approach orientation, as goal orientation may play a role in academic performance of pharmacy students.

The use of YouTube Analytics of Video Lecture Capture as a Teaching and Learning Performance Enhancer

Do patterns in the YouTube viewing analytics of Lecture Capture videos point to areas of potential teaching and learning performance enhancement? The goal of this action based research project was to capture and quantitatively analyse the viewing behaviours and patterns of a series of video lecture captures across several computing modules in Queen’s University, Belfast, Northern Ireland. The research sought to establish if a quantitative analysis of viewing behaviours coupled with a qualitative evaluation of the material provided from the students could be correlated to provide generalised patterns that could then be used to understand the learning experience of students during face to face lectures and, thereby, present opportunities to reflectively enhance lecturer performance and the students’ overall learning experience and, ultimately, their level of academic attainment.

Corporate Ownership, Control, and Firm Performance in Victorian Britain

Scholars have long debated whether ownership structure matters for firm performance. The standard view with respect to Victorian Britain is that family-controlled companies had a detrimental effect on operating profit and shareholder value. Here, we examine this view using a hand-collected corporate ownership dataset. Our main finding is that it was not necessarily the broad structure of corporate ownership that mattered for performance, but whether family blockholders had a governance role. Large active blockholders tended to increase operating performance, implying that they reduced managerial agency problems. In contrast, we find that directors who were independent of large family owners were more likely to increase shareholder value.

Control energy consumption and system performance in vector control of voltage source converters

Power electronics plays an important role in the control and conversion of modern electric power systems. In particular, to integrate various renewable energies using DC transmissions and to provide more flexible power control in AC systems, significant efforts have been made in the modulation and control of power electronics devices. Pulse width modulation (PWM) is a well developed technology in the conversion between AC and DC power sources, especially for the purpose of harmonics reduction and energy optimization. As a fundamental decoupled control method, vector control with PI controllers has been widely used in power systems. However, significant power loss occurs during the operation of these devices, and the loss is often dissipated in the form of heat, leading to significant maintenance effort. Though much work has been done to improve the power electronics design, little has focused so far on the investigation of the controller design to reduce the controller energy consumption (leading to power loss in power electronics) while maintaining acceptable system performance. This paper aims to bridge the gap and investigates their correlations. It is shown a more thoughtful controller design can achieve better balance between energy consumption in power electronics control and system performance, which potentially leads to significant energy saving for integration of renewable power sources.

MRZ-99030 – a novel modulator of Aβ aggregation: II – reversal of Aβ oligomer-induced deficits in long-term potentiation (LTP) and cognitive performance in rats and mice.

β-amyloid1-42 (Aβ1-42) is a major endogenous pathogen underlying the aetiology of Alzheimer's disease (AD). Recent evidence indicates that soluble Aβ oligomers, rather than plaques, are the major cause of synaptic dysfunction and neurodegeneration. Small molecules that suppress Aβ aggregation, reduce oligomer stability or promote off-pathway non-toxic oligomerization represent a promising alternative strategy for neuroprotection in AD. MRZ-99030 was recently identified as a dipeptide that modulates Aβ1-42 aggregation by triggering a non-amyloidogenic aggregation pathway, thereby reducing the amount of intermediate toxic soluble oligomeric Aβ species. The present study evaluated the relevance of these promising results with MRZ-99030 under pathophysiological conditions i.e. against the synaptotoxic effects of Aβ oligomers on hippocampal long term potentiation (LTP) and two different memory tasks. Aβ1-42 interferes with the glutamatergic system and with neuronal Ca2+ signalling and abolishes the induction of LTP. Here we demonstrate that MRZ-99030 (100–500 nM) at a 10:1 stoichiometric excess to Aβ clearly reversed the synaptotoxic effects of Aβ1-42 oligomers on CA1-LTP in murine hippocampal slices. Co-application of MRZ-99030 also prevented the two-fold increase in resting Ca2+ levels in pyramidal neuron dendrites and spines triggered by Aβ1-42 oligomers. In anaesthetized rats, pre-administration of MRZ-99030 (50 mg/kg s.c.) protected against deficits in hippocampal LTP following i.c.v. injection of oligomeric Aβ1-42. Furthermore, similar treatment significantly ameliorated cognitive deficits in an object recognition task and under an alternating lever cyclic ratio schedule after the i.c.v. application of Aβ1-42 and 7PA2 conditioned medium, respectively. Altogether, these results demonstrate the potential therapeutic benefit of MRZ-99030 in AD.

Impaired orthostatic blood pressure recovery and cognitive performance at two-year follow up in older adults: The Irish Longitudinal Study on Ageing

Background: Prospective investigations of the association between impaired orthostatic blood pressure (BP) regulation and cognitive decline in older adults are limited, and findings to-date have been mixed. The aim of this study was to determine whether impaired recovery of orthostatic BP was associated with change in cognitive function over a 2-year period, in a population based sample of community dwelling older adults. 

Methods: Data from the first two waves of the Irish Longitudinal Study on Ageing were analysed. Orthostatic BP was measured during a lying to standing orthostatic stress protocol at wave 1 using beat-to-beat digital plethysmography, and impaired recovery of BP at 40 s post stand was investigated. Cognitive function was assessed at wave 1 and wave 2 (2 years later) using the Mini-Mental State Exam (MMSE), verbal fluency and word recall tasks. 

Results: After adjustment for measured, potential confounders, and multiple imputation for missing data, the change in the number of errors between waves on the MMSE was 10 % higher [IRR (95 % CI) = 1.10 (0.96, 1.26)] in those with impaired recovery at 40 s. However, this was not statistically significant (p = 0.17). Impaired BP recovery was not associated with change in performance on any of the other cognitive measures. 

Conclusions: There was no clear evidence for an association between impaired recovery of orthostatic BP and change in cognition over a 2-year period in this nationally representative cohort of older adults. Longer follow-up and more detailed cognitive testing would be advantageous to further investigate the relationship between orthostatic BP and cognitive decline.