Stability of Short-span Bridges Subject to Overtopping during Floods: Case Studies from UK and the USA

As a consequence of increased levels of flooding, largely attributable to urbanization of watersheds (and perhaps climate change, more frequent extreme rainfall events are occurring and threatening existing critical infrastructure. Many of which are short-span bridges over relatively small waterways (e.g., small rivers, streams and canals). Whilst these short-span bridges were designed, often many years ago, to pass relatively minor the then standard return-period floods, in recenttimes the failure incidence of such short-span bridges has been noticeably increasing. This is suggestive of insufficient hydraulic capacity or alternative failure mechanism not envisaged at the time of design e.g. foundation scour or undermining. This paper presen ts, and draws lessons, from bridge failures in Ireland and the USA. For example, in November 2009, the UK and Ireland were subjected to extraordinarily severe weather conditions for several days. The resulting flooding led to the collapse of three UK bridges that were generally 19th century masonry arch bridges, withrelatively shallow foundations. Parallel failure events have been observed in the USA. To date, knowledge of the combined effect of waterway erosion, bridge submergence, and geotechnical collapse has not been adequately studied. Recent research carried out considered the hydraulic analysis of short span bridges under flood conditions, but no consideration was given towards the likely damage to these structures due to erosive coupling of hydraulic and geotechnical factors. Some work has been done to predict the discharge downstream of an inundated arch, focusing onpredicting afflux, as opposed to bridge scour, under both pressurized and free-surface flows, but no ! predictive equation for scour under pressurized conditions was ever considered. The case studies this paper presents will be augmented by the initial findings from the laboratory experiments investigating the effects of surcharged flow and subsequent scour within the vicinity of single span arch bridges. Velocities profiles will be shown within the vicinity of the arch, in addition to the depth of consequent scour, for a series of flows and model spans. The data will be presented and correlated to the most recent predictive equations for submerged contraction and abutment scour. The accuracy of these equations is examined, and the findings used as a basis for developing further studies in relation to short span bridges.

Female narratives of ‘new’ citizens’ belonging(s) and identities in Europe: case studies from the Netherlands and Britain

Public discourses on citizenship, identity and nationality, which link geographical borders and the political boundaries of a community, are infused with tensions and contradictions. This paper illustrates how these tensions are interwoven with multilayered notions of home, belonging, migration, citizenship and individual’s ‘longing just to be’, focusing on the Dutch and the British context. The narratives of a number of Dutch and British women, who either immigrated to the respective countries or were born to immigrants, illustrate how the growing rigid integration and assimilative discourses in Europe contradict an individual anchoring in national and local communities. The narratives of women participating in these studies show multilayered angles of belonging presenting an alternative to the increasing strong argument for a fixed notion of positioning and national belonging. The female ‘new’ citizens in our study tell stories of individual choices, social mobility and a sense of multiple belonging in and across different communities.

Parallel Time Series Analysis and Income Inequality: A New Approach to Comparative Case Studies

This case study deals with the role of time series analysis in sociology, and its relationship with the wider literature and methodology of comparative case study research. Time series analysis is now well-represented in top-ranked sociology journals, often in the form of ‘pooled time series’ research designs. These studies typically pool multiple countries together into a pooled time series cross-section panel, in order to provide a larger sample for more robust and comprehensive analysis. This approach is well suited to exploring trans-national phenomena, and for elaborating useful macro-level theories specific to social structures, national policies, and long-term historical processes. It is less suited however, to understanding how these global social processes work in different countries. As such, the complexities of individual countries - which often display very different or contradictory dynamics than those suggested in pooled studies – are subsumed. Meanwhile, a robust literature on comparative case-based methods exists in the social sciences, where researchers focus on differences between cases, and the complex ways in which they co-evolve or diverge over time. A good example of this is the inequality literature, where although panel studies suggest a general trend of rising inequality driven by the weakening power of labour, marketisation of welfare, and the rising power of capital, some countries have still managed to remain resilient. This case study takes a closer look at what can be learned by applying the insights of case-based comparative research to the method of time series analysis. Taking international income inequality as its point of departure, it argues that we have much to learn about the viability of different combinations of policy options by examining how they work in different countries over time. By taking representative cases from different welfare systems (liberal, social democratic, corporatist, or antipodean), we can better sharpen our theories of how policies can be more specifically engineered to offset rising inequality. This involves a fundamental realignment of the strategy of time series analysis, grounding it instead in a qualitative appreciation of the historical context of cases, as a basis for comparing effects between different countries.

Innovation persistence: Survey and case-study evidence

Evidence on the persistence of innovation sheds light on the nature of the innovation process and can guide appropriate policy development. This paper examines innovation persistence in Ireland and Northern Ireland using complementary quantitative and case-study approaches. Panel data derived from innovation surveys is used, and suggests very different results to previous analyses of innovation persistence primarily based on patents data. Product and process innovation are found to exhibit strong general persistence but we find no evidence that persistence is stronger among highly active innovators. Our quantitative evidence is most strongly consistent with a process of cumulative accumulation at plant level. Our case-studies highlight a number of factors which can either interrupt or stimulate this process including market volatility, plants’ organisational context and regulatory changes. Notably, however, the balance of influences on product and process innovation persistence differs, with product innovation persistence linked more strongly to strategic factors and process changes more often driven by market pressures.
© 2007 Elsevier B.V. All rights reserved.

Eclipsing Binary Science via the Merging of Transit and Doppler Exoplanet Survey Data—A Case Study with the MARVELS Pilot Project and SuperWASP

Exoplanet transit and Doppler surveys discover many binary stars during their operation that can be used to conduct a variety of ancillary science. Specifically, eclipsing binary stars can be used to study the stellar mass-radius relationship and to test predictions of theoretical stellar evolution models. By cross-referencing 24 binary stars found in the MARVELS Pilot Project with SuperWASP photometry, we find two new eclipsing binaries, TYC 0272-00458-1 and TYC 1422-01328-1, which we use as case studies to develop a general approach to eclipsing binaries in survey data. TYC 0272-00458-1 is a single-lined spectroscopic binary for which we calculate a mass of the secondary and radii for both components using reasonable constraints on the primary mass through several different techniques. For a primary mass of M 1 = 0.92 ± 0.1 M sun, we find M 2 = 0.610 ± 0.036 M sun, R 1 = 0.932 ± 0.076 R sun, and R 2 = 0.559 ± 0.102 R sun, and find that both stars have masses and radii consistent with model predictions. TYC 1422-01328-1 is a triple-component system for which we can directly measure the masses and radii of the eclipsing pair. We find that the eclipsing pair consists of an evolved primary star (M 1 = 1.163 ± 0.034 M sun, R 1 = 2.063 ± 0.058 R sun) and a G-type dwarf secondary (M 2 = 0.905 ± 0.067 M sun, R 2 = 0.887 ± 0.037 R sun). We provide the framework necessary to apply this analysis to much larger data sets.

Absorbing new knowledge in small and medium-sized enterprises: A multiple case analysis of Six Sigma

The primary aim of this article is to critically analyse the development of Six Sigma theory and practice within small and medium-sized enterprises (SMEs) using a multiple case study approach. The article also explores the subsequent development of Lean Six Sigma as a means of addressing the perceived limitations of the efficacy of Six Sigma in this context. The overarching theoretical framework is that of absorptive capacity, where Six Sigma is conceptualized as new knowledge to be absorbed by smaller firms. The findings from a multiple case study involving repeat interviews and focus groups informed the development of an analytical model demonstrating the dynamic underlying routines for the absorptive capacity process and the development of a number of summative propositions relating the characteristics of SMEs to Six Sigma and Lean Six Sigma implementation.

Managing Cultural Diversity in Healthcare Partnerships: The Case of LIFT

Purpose: The National Health Service (NHS) Local Improvement Finance Trust (LIFT) programme was launched in 2001 as an innovative public-private partnership to address the historical under-investment in local primary care facilities in England. The organisations from the public and private sector that comprise a local LIFT partnership each have their own distinctive norms of behaviour and acceptable working practices - ultimately different organisational cultures. The purpose of this article is to assess the role of organisational culture in facilitating (or impeding) LIFT partnerships and to contribute to an understanding of how cultural diversity in public-private partnerships is managed at the local level. Design/methodology/approach: The approach taken was qualitative case studies, with data gathering comprising interviews and a review of background documentation in three LIFT companies purposefully sampled to represent a range of background factors. Elite interviews were also conducted with senior policy makers responsible for implementing LIFT policy at the national level. Findings: Interpreting the data against a conceptual framework designed to assess approaches to managing strategic alliances, the authors identified a number of key differences in the values, working practices and cultures in public and private organisations that influenced the quality of joint working. On the whole, however, partners in the three LIFT companies appeared to be working well together, with neither side dominating the development of strategy. Differences in culture were being managed and accommodated as partnerships matured. Research limitations/implications: As LIFT develops and becomes the primary source of investment for managing, developing and channelling funding into regenerating the primary care infrastructure, further longitudinal work might examine how ongoing partnerships are working, and how changes in the cultures of public and private partners impact upon wider relationships within local health economies and shape the delivery of patient care. Originality/value: To the authors' knowledge this is the first study of the role of culture in mediating LIFT partnerships and the findings add to the evidence on public-private partnerships in the NHS

Natural history of idiopathic erythrocytosis - A retrospective case series review

Idiopathic Erythrocytosis (IE) is a diagnosis given to patients who have an absolute erythrocytosis (red cell mass more than 25% above their mean normal predicted value) but who do not have a known form of primary or secondary erythrocytosis (BCSH guideline, 2005). We report here the results of a follow-up study of 80 patients (44 male and 36 female) diagnosed with IE from the United Kingdom and the Republic of Ireland over a 10 year period. Baseline information was initially collected when investigating for molecular causes of erythrocytosis in this group. The diagnosis of IE was made on the basis of a raised red cell mass >25% above mean normal predicted value, absence of Polycythaemia Vera (PV) based on the criteria of Pearson and Messinezy (1996), and the exclusion of secondary erythrocytosis (oxygen saturation >92% on pulse oximetry, no history of sleep apnoea, no renal or hepatic pathology, and a normal oxygen dissociation curve (if indicated). The average age at diagnosis of erythrocytosis was 34.5 (2–74 years). Erythropoietin levels were available for 77/80 of the patients and were low in 18 (23%) and normal or high in 59 (74%). Ultrasound imaging was carried out in 67 patients (84%) at time of diagnosis and no significant abnormalities found. Fourteen patients had a family history of erythrocytosis. These patients have now been followed up for an average of 9.4 years (range 1–39). Out of 80 patients 56 patients can still be classified as having IE, of whom 52 are living (cause of death in the other 4 - lung cancer, RTA, sepsis, unknown). Thirty-five of these patients are regularly venesected, 3 take hydroxyurea (one also venesected), 11 receive no treatment while treatment is unknown in 2. Twenty take aspirin, 1 warfarin and 31 no thromboprophylaxis. Four of these patients had suffered thromboembolic complications (3 with CVA/TIAs and 1 with recurrent DVT) at or before their original diagnosis. Since diagnosis 8 patients have had 9 thrombotic events of which 7 were arterial (1 CVA, 3 TIAs, 1 MI, 2 PVD) and 2 venous (DVT/PE). Twenty take aspirin, 1 dipyridamole, 1 warfarin and 30 take no thromboprophylaxis. Out of the 24 patients who now have a diagnosis other than IE, 8 have been diagnosed with myelo-proliferative disease. Thirteen patients have a molecular abnormality which is likely to account for their erythrocytosis (11 VHL, 1 PHD-2, 1 EPO-receptor mutations). Three patients have secondary erythrocytosis. Older case studies identified a heterogenous group of patients, some of whom probably had apparent erythrocytosis and some who had either primary polycythaemia or secondary causes later identified (Modan and Modan, Najean et al). More recent reviews have identified a more homogenous group with low rates of transformation to myelofibrosis/acute leukaemia and low rates of thrombosis of around 1% patient-year. Follow up of our initial patient group does indeed reveal a heterogeneous group of patients with 10% now diagnosed with an MPD, although when analysis is confined to those patients who continue to fulfil the criteria for IE, the clinical course has been more stable. There has been no progression to MDS or leukaemia in this group (one patient with PV progressed to AML). The rate of thrombosis is 1.6% patient-years which is lower than the rate seen in PV and is consistent with the rate identified in other series. Molecular defects continue to be identified in this group and future investigation is likely to reveal further abnormalities.

Tool life and hole surface integrity studies for hole-making of Ti6Al4V Alloy

With a significant growth in the use of titanium alloys in the aviation manufacturing industry, the key challenge of making high-quality holes in the aircraft assembly process needs to be addressed. In this work, case studies deploying traditional drilling and helical milling technologies are carried out to investigate the tool life and hole surface integrity for hole-making of titanium alloy. Results show that the helical milling process leads to much longer tool life, generally lower hole surface roughness, and higher hole subsurface microhardness. In addition, no plastically deformed layer or white layer has been observed in holes produced by helical milling. In contrast, a slightly softened region was always present on the drilled surface. The residual stress distributions within the hole surface, including compressive and tensile residual stress, have also been investigated in detail.