Recruitment and capacity-building challenges in participatory research involving young people in Northern Ireland

Consulting young people in social research is increasingly popular and is not confined to their recruitment as participants but extends to the design, delivery and dissemination of research. In this chapter we explore the recruitment and capacity building challenges involved in working with young people as researchers. We will introduce some of the theoretical issues around young people’s participation. Drawing on experiences from four separate participatory research projects with young people in Northern Ireland, we will highlight some of the difficulties encountered and give some practical approaches to managing the research process. Strategies for recruiting and training young researchers will be considered and we also reflect on what the benefits of young people’s involvement can be; not only enhancing the research process but also empowering young people and creating the potential for social agency.

Use of data dependence graphs in the design of bit-level systolic arrays

The use of bit-level systolic array circuits as building blocks in the construction of larger word-level systolic systems is investigated. It is shown that the overall structure and detailed timing of such systems may be derived quite simply using the dependence graph and cut-set procedure developed by S. Y. Kung (1988). This provides an attractive and intuitive approach to the bit-level design of many VLSI signal processing components. The technique can be applied to ripple-through and partly pipelined circuits as well as fully systolic designs. It therefore provides a means of examining the relative tradeoff between levels of pipelining, chip area, power consumption, and throughput rate within a given VLSI design.

Contact and context: sharing education and building relationships in a divided society

One approach to tackling problems of division in society has been to promote collaboration and engagement between schools separated on ethno-religious lines. Based on some variant of contact theory, the received wisdom is that inter-group encounters can contribute to prejudice reduction and promote more harmonious relationships. Evidence to support this analysis is convincing; however, relatively little is known about the environmental factors that impede or enhance the potential for contact in different contexts. The importance of understanding such factors is underscored in divided jurisdictions, where separate education has been linked to the perpetuation of division and hostility. This paper adopts a qualitative approach to exploring the impact of two inter-school initiatives in Northern Ireland. The projects are located in contrasting socio-political and demographic environments, and research findings point to very different contact outcomes for participants in each. Seemingly relevant factors include the degree of congruence between school and community norms and values, the opportunity to develop relationships outside the school context, the relationships developed between the schools and local communities and the historical, political and social referents used by individuals to navigate the contact experience. The paper concludes with some reflections on factors that may help foster social harmony and on potential policy implications of the findings.

A study of secondary instabilities in postbuckling composite aerostructures

A number of experimental studies have shown that postbuckling stiffened composite panels, loaded in uniaxial compression, may undergo secondary instabilities, characterised by an abrupt change in the buckled mode-shape of the skin between the supporting stiffeners. In this study high-speed digital speckle photogrammetry is used to gain further insight into an I-stiffened panel's response during this transient phase. This energy-dissipating phenomenon will be shown to be able to cause catastrophic structural failure in vulnerable structures. It is therefore imperative that an accurate and reliable methodology is available to predict this phenomenon. The shortcomings of current non-linear implicit solution schemes, found in most commercially-available finite element codes, are discussed. A robust and efficient strategy, which utilises an automated quasi-, static/pseudo-transient hybrid scheme, is presented in this paper and validated using a number of experimental tests. This approach is shown to be able to predict mode-jumping with good accuracy.

An automated hybrid procedure for capturing mode-jumping in postbuckling composite stiffened structures

This paper presents a robust finite element procedure for modelling the behaviour of postbuckling structures undergoing mode-jumping. Current non-linear implicit finite element solution schemes, found in most finite element codes, are discussed and their shortcomings highlighted. A more effective strategy is presented which combines a quasi-static and a pseudo-transient routine for modelling this behaviour. The switching between these two schemes is fully automated and therefore eliminates the need for user intervention during the solution process. The quasi-static response is modelled using the are-length constraint while the pseudo-transient routine uses a modified explicit dynamic routine, which is more computationally efficient than standard implicit and explicit dynamic schemes. The strategies for switching between the quasi-static and pseudo-transient routines are presented

Capturing mode-switching in postbuckling composite panels using a modified explicit procedure

A postbuckling blade-stiffened composite panel was loaded in uniaxial compression, until failure. During loading beyond initial buckling, this panel was observed to undergo a secondary instability characterised by a dynamic mode shape change. These abrupt changes cause considerable numerical difficulties using standard path-following quasi-static solution procedures in finite element analysis. Improved methods such as the arc-length-related procedures do better at traversing certain critical points along an equilibrium path but these procedures may also encounter difficulties in highly non-linear problems. This paper presents a robust, modified explicit dynamic analysis for the modelling of postbuckling structures. This method was shown to predict the mode-switch with good accuracy and is more efficient than standard explicit dynamic analysis. (C) 2003 Elsevier Science Ltd. All rights reserved.

Changing climate, changing process: implications for salt transportation and weathering within building sandstones in the UK

Salt weathering is a crucial process that brings about a change in stone, from the scale of landscapes to stone outcrops and natural building stone facades. It is acknowledged that salt weathering is controlled by fluctuations in temperature and moisture, where repeated oscillations in these parameters can cause re-crystallisation, hydration/de-hydration of salts, bringing about stone surface loss in the form of, for example, granular disaggregation, scaling, and multiple flaking. However, this ‘traditional’ view of how salt weathering proceeds may need to be re-evaluated in the light of current and future climatic trends. Indeed, there is considerable scope for the investigation of consequences of climate change on geomorphological processes in general. Building on contemporary research on the ‘deep wetting’ of natural building stones, it is proposed that (as stone may be wetter for longer), ion diffusion may become a more prominent mechanism for the mixing of molecular constituents, and a shift in focus from physical damage to chemical change is suggested. Data from ion diffusion cell experiments are presented for three different sandstone types, demonstrating that salts may diffuse through porous stone relatively rapidly (in comparison to, for example, dense concrete). Pore water from stones undergoing diffusion experiments was extracted and analysed. Factors controlling ion diffusion
relating to ‘time of wetness’ within stones are discussed, (continued saturation, connectivity of pores, mineralogy, behaviour of salts, sedimentary structure), and potential changes in system dynamics as a result of climate change are addressed. System inputs may change in terms of increased moisture input, translating into a greater depth of wetting front. Salts are likely to be ‘stored’ differently in stones, with salt being in solution for longer periods (during prolonged winter wetness). This has myriad implications in terms of the movement of ions by diffusion and the potential for chemical change in the stone (especially in more mobile constituents), leading to a weakening of the stone matrix/grain boundary cementing. The ‘output’ may be mobilisation and precipitation of elements leading to, for example, uneven cementing in the stone. This reduced strength of the stone, or compromised ability of the stone to absorb stress, is likely to make crystallisation a more efficacious mechanism of decay when it does occur. Thus, a delay in the onset of crystallisation while stonework is wet does not preclude exaggerated or accelerated material loss when it finally happens.

Building partnerships in social work education: Towards achieving collaborative advantage for employers and universities

Summary: Better partnership working between employers and academic institutions has recently been identified as one of the key developments needed to improve social work education and practice in the UK (Social Work Reform Board, 2010). However, the praxis of collaborative working in social work education remains under-researched and it is unclear what factors are significant in promoting effective partnership. This article contributes to this debate by reporting research that examined the experience of social work academics working with employers to deliver qualifying level social work education in Northern Ireland.

Findings: This analysis explores key factors in the dynamics of the collaborative process and identifies both congruence and discord in academic and employer perspectives. The findings highlight the collaborative advantage accruing from partnership working, which include the benefits of a centrally coordinated system for the management and delivery of practice learning. However, the results also indicate that engaging in partnership working is a complex process that can create conflict and tensions, and that it is important to ground collaborations in realistic expectations of what can be achieved.

Application: This article identifies opportunities for achieving collaborative advantage and the challenges. It identifies lessons learned about the value of partnership working in social work education and ways to increase its efficacy.

A proposed method for evaluating the artisanal production of recycled plastic paving blocks in West Africa

Plastic wastes, and particularly plastic bags and sachets, are a major concern for urban and rural environment in African countries. In the last years some actions have been started for the plastic recycling like the artisanal production of paving blocks with melted plastic bags and sand, albeit with differences in production processes. Nevertheless, the environmental and economic impact of such activities is still to be confirmed. The aim of this study is to propose a methodology for assessing and comparing the environmental and energetic performances of artisanal methods, and for defining the overall quality of the produced blocks. This methodology has been shaped through the analysis of
production processes operated by artisans/small enterprises in West Africa and through physic-mechanical tests on the blocks. A questionnaire which allows an insight into the process and on the product has been developed and tested over five processes. Results show that a high input energy level is observed through all the processes, while considerable savings of energy could be achieved. Moreover, tests results confirmed the importance of the utilised plastic concerning thermal dilatation, mechanical resistance at higher temperature and cooling-shrinkage effects. In conclusion, doubts remain about the technical and environmental effectiveness of the sampled experiences, durability of the products and sustainability of this approach. Nevertheless, being the collection and recycling of plastic wastes a potential income generation activity for marginalised social groups in urban environment, a process optimisation could improve the impact of blocks production. Alternative recycling activities should also be considered.

Comfort Care Rounds: A Staff Capacity-Building Initiative in Long-Term Care Homes

This article reports a pilot evaluation of Comfort Care Rounds (CCRs)-a strategy for addressing long-term care home staff's palliative and end-of-life care educational and support needs. Using a qualitative descriptive design, semistructured individual and focus group interviews were conducted to understand staff members' perspectives and feedback on the implementation and application of CCRs. Study participants identified that effective advertising, interest, and assigning staff to attend CCRs facilitated their participation. The key barriers to their attendance included difficulty in balancing heavy workloads and scheduling logistics. Interprofessional team member representation was sought but was not consistent. Study participants recognized the benefits of attending; however, they provided feedback on how the scheduling, content, and focus could be improved. Overall, study participants found CCRs to be beneficial to their palliative and end-of-life care knowledge, practice, and confidence. However, they identified barriers and recommendations, which warrant ongoing evaluation.

Exploring molecular recognition pathways in one- and two-component gels formed by dendritic lysine-based gelators

This paper provides an integrated overview of the factors which control gelation in a family of dendritic gelators based on lysine building blocks. In particular, we establish that higher generation systems are more effective gelators, amide linkages in the dendron are better than carbamates, and long alkyl chain surface groups and a carboxylic acid at the focal point enhance gelation. The gels are best formed in relatively low polarity solvents with no hydrogen bond donor ability and limited hydrogen bond acceptor capacity. The dendrons with acid groups at the focal point can form two component gels with diaminododecane, and in this case, it is the lower generation dendrons which can avoid steric hindrance and form more effective gels. The stereochemistry of lysine is crucial in self-assembly, with opposite enantiomers disrupting each other's molecular recognition pathways. For the two-component system, stoichiometry is key, if too much diamine is present, dendron-stabilised microcrystals of the diamine begin to form. Interestingly, gelation still occurs in this case, and the systems with amides/alkyl chains are more effective gels, as a consequence of enhanced dendron-dendron intermolecular interactions allowing the microcrystals to form an interconnected network.