Smoking and All-cause Mortality in Older Adults: Results From the CHANCES Consortium

INTRODUCTION: Smoking is known to be a major cause of death among middle-aged adults, but evidence on its impact and the benefits of smoking cessation among older adults has remained limited. Therefore, we aimed to estimate the influence of smoking and smoking cessation on all-cause mortality in people aged ≥60 years.

METHODS: Relative mortality and mortality rate advancement periods (RAPs) were estimated by Cox proportional hazards models for the population-based prospective cohort studies from Europe and the U.S. (CHANCES [Consortium on Health and Ageing: Network of Cohorts in Europe and the U.S.]), and subsequently pooled by individual participant meta-analysis. Statistical analyses were performed from June 2013 to March 2014.

RESULTS: A total of 489,056 participants aged ≥60 years at baseline from 22 population-based cohort studies were included. Overall, 99,298 deaths were recorded. Current smokers had 2-fold and former smokers had 1.3-fold increased mortality compared with never smokers. These increases in mortality translated to RAPs of 6.4 (95% CI=4.8, 7.9) and 2.4 (95% CI=1.5, 3.4) years, respectively. A clear positive dose-response relationship was observed between number of currently smoked cigarettes and mortality. For former smokers, excess mortality and RAPs decreased with time since cessation, with RAPs of 3.9 (95% CI=3.0, 4.7), 2.7 (95% CI=1.8, 3.6), and 0.7 (95% CI=0.2, 1.1) for those who had quit <10, 10 to 19, and ≥20 years ago, respectively.

CONCLUSIONS: Smoking remains as a strong risk factor for premature mortality in older individuals and cessation remains beneficial even at advanced ages. Efforts to support smoking abstinence at all ages should be a public health priority.

A chemically unlocked binary molecular switch

A highly luminescent and sensitive terbium complex of a ligand comprising of a phthalimide group appended to a DO3A moiety is an active pH sensor that is conditional on its previous pH. © 2012 The Royal Society of Chemistry.

Structure-tunable Janus fibers fabricated using spinnerets with varying port angles

The preparation of Janus fibers using a new side-by-side electrospinning process is reported. By manipulating the angle between the two ports of the spinneret emitting the working fluids, Janus nanofibers with tunable structures in terms of width, interfacial area and also volume of each side can be easily fabricated.

A Simplified Method for Ductility Calculation in RC Jacketed Columns

Reinforced concrete (RC) jacketing is a common method to retrofit existing columns with poor structural performance. It can be applied in two different ways: if the continuity of the jacket is ensured, the axial load of the column can be transferred to the jacket, which will be directly loaded; conversely, if no continuity is provided, the jacket induces only confinement action. In both cases the strength and ductility evaluation is rather complex, due to the different physical phenomena included, such as confinement, composite action core-jacket, preload, buckling of longitudinal bars.
Although different theoretical studies have been carried out to calculate the confinement effects, a practical approach to evaluate the flexural capacity and ductility is still missing. The calculation of these quantities is often related to the use of commercial computer programs, taking advantage of numerical methods such as fiber method or finite element method.
This paper presents a simplified approach to calculate the flexural strength and ductility of square RC jacketed sections subjected to axial load and bending moment. In particular the proposed approach is based on the calibration of the stress-block parameters including the confinement effect. Equilibrium equations are determined and buckling of longitudinal bars is modeled with a suitable stress-strain law. Moment-curvature curves are derived with simple calculations. Finally, comparisons are made with numerical analyses carried out with the code OpenSees and with experimental data available in the literature, showing good agreement.

Refresh-free dynamic standard-cell based memories: Application to a QC-LDPC decoder

The area and power consumption of low-density parity check (LDPC) decoders are typically dominated by embedded memories. To alleviate such high memory costs, this paper exploits the fact that all internal memories of a LDPC decoder are frequently updated with new data. These unique memory access statistics are taken advantage of by replacing all static standard-cell based memories (SCMs) of a prior-art LDPC decoder implementation by dynamic SCMs (D-SCMs), which are designed to retain data just long enough to guarantee reliable operation. The use of D-SCMs leads to a 44% reduction in silicon area of the LDPC decoder compared to the use of static SCMs. The low-power LDPC decoder architecture with refresh-free D-SCMs was implemented in a 90nm CMOS process, and silicon measurements show full functionality and an information bit throughput of up to 600 Mbps (as required by the IEEE 802.11n standard).

Mild temperature palladium-catalyzed ammoxidation of ethanol to acetonitrile

The ammoxidation of ethanol is investigated as a renewable process for the production of acetonitrile from a bio-feedstock. Palladium catalysts are shown to be active and very selective (>99%) to this reaction at moderate to low temperatures (150-240 °C), with acetonitrile yields considered a function of Pd morphology. Further investigations reveal that the stability of these catalysts is influenced by an unselective product, and that any deactivation observed is reversible. Interpretation of this deactivation allows operating conditions to be defined for the stable, high yielding production of acetonitrile from ethanol.

Potentially inappropriate prescribing among people with dementia in primary care: a retrospective cross-sectional study using the Enhanced Prescribing Database

Background: Little is known about prescribing appropriateness for community-dwelling people with dementia (PWD).
Objective To estimate potentially inappropriate prescribing (PIP) prevalence among PWD in primary care in Northern Ireland, and to investigate associations between PIP and polypharmacy, age and gender.

Methods: A retrospective cross-sectional study was conducted, using data from the Enhanced Prescribing Database. Patients were eligible if a medicine indicated for dementia management was dispensed to them during 01/01/2013 – 31/12/2013. Polypharmacy was indicated by use of ≥4 repeat medications from different drug groups. A subset of the Screening Tool of Older Persons Potentially Inappropriate Prescriptions (STOPP) criteria, comprising 36 indicators, was applied to the dataset. Overall prevalence of PIP and the prevalence per each STOPP criterion was calculated as a proportion of all eligible persons in the dataset. Logistic regression was used to investigate associations between PIP, polypharmacy, age and gender.

Results: The study population comprised 6826 patients. Polypharmacy was observed in 81.5% (n=5564) of patients. PIP prevalence during the study period was 64.4% (95% CI 63.2 – 65.5; n=4393). The most common instance of PIP was the use of anticholinergic/antimuscarinic medications (n=1718; 25.2%; 95% CI 24.2 – 26.2). In multivariable analyses, both polypharmacy and gender (being female) were associated with PIP, with odds ratios of 7.6 (95% CI 6.6 – 8.7) and 1.3 (95% CI 1.2 – 1.4) respectively. No association was observed between PIP and age, after adjustments for gender and polypharmacy.

Conclusion: This study identified a high prevalence of PIP in community-dwelling PWD. Future interventions may need to focus on certain therapeutic categories and polypharmacy.

Inexact-aware architecture design for ultra-low power bio-signal analysis

This study introduces an inexact, but ultra-low power, computing architecture devoted to the embedded analysis of bio-signals. The platform operates at extremely low voltage supply levels to minimise energy consumption. In this scenario, the reliability of static RAM (SRAM) memories cannot be guaranteed when using conventional 6-transistor implementations. While error correction codes and dedicated SRAM implementations can ensure correct operations in this near-threshold regime, they incur in significant area and energy overheads, and should therefore be employed judiciously. Herein, the authors propose a novel scheme to design inexact computing architectures that selectively protects memory regions based on their significance, i.e. their impact on the end-to-end quality of service, as dictated by the bio-signal application characteristics. The authors illustrate their scheme on an industrial benchmark application performing the power spectrum analysis of electrocardiograms. Experimental evidence showcases that a significance-based memory protection approach leads to a small degradation in the output quality with respect to an exact implementation, while resulting in substantial energy gains, both in the memory and the processing subsystem.

Heterogeneous error-resilient scheme for spectral analysis in ultra-low power wearable electrocardiogram devices

Wearable devices performing advanced bio-signal analysis algorithms are aimed to foster a revolution in healthcare provision of chronic cardiac diseases. In this context, energy efficiency is of paramount importance, as long-term monitoring must be ensured while relying on a tiny power source. Operating at a scaled supply voltage, just above the threshold voltage, effectively helps in saving substantial energy, but it makes circuits, and especially memories, more prone to errors, threatening the correct execution of algorithms. The use of error detection and correction codes may help to protect the entire memory content, however it incurs in large area and energy overheads which may not be compatible with the tight energy budgets of wearable systems. To cope with this challenge, in this paper we propose to limit the overhead of traditional schemes by selectively detecting and correcting errors only in data highly impacting the end-to-end quality of service of ultra-low power wearable electrocardiogram (ECG) devices. This partition adopts the protection of either significant words or significant bits of each data element, according to the application characteristics (statistical properties of the data in the application buffers), and its impact in determining the output. The proposed heterogeneous error protection scheme in real ECG signals allows substantial energy savings (11% in wearable devices) compared to state-of-the-art approaches, like ECC, in which the whole memory is protected against errors. At the same time, it also results in negligible output quality degradation in the evaluated power spectrum analysis application of ECG signals.

Strength and ductility of RC jacketed columns: a simplified analytical method

Reinforced concrete (RC) jacketing is a common method for retrofitting existing columns with poor structural performance. It can be applied in two different ways: if the continuity of the jacket is ensured, the axial load of the column can be transferred to the jacket, which will be directly loaded; conversely, if no continuity is provided, the jacket will induce only confinement action. In both cases the strength and ductility evaluation is rather complex, due to the different physical phenomena included, such as confinement, core-jacket composite action, preload and buckling of longitudinal bars.
Although different theoretical studies have been carried out to calculate the confinement effects, a practical approach to evaluate the flexural capacity and ductility is still missing. The calculation of these quantities is often related to the use of commercial software, taking advantage of numerical methods such as fibre method or finite element method.
This paper presents a simplified approach to calculate the flexural strength and ductility of square RC jacketed sections subjected to axial load and bending moment. In particular the proposed approach is based on the calibration of the stress-block parameters including the confinement effect. Equilibrium equations are determined and buckling of longitudinal bars is modelled with a suitable stress-strain law. Moment-curvature curves are derived with simple calculations. Finally, comparisons are made with numerical analyses carried out with the code OpenSees and with experimental data available in the literature, showing good agreement.

Rocking behaviour of multi-block columns subjected to pulse-type ground motion accelerations

Ancient columns, made with a variety of materials such as marble, granite, stone or masonry are an important part of the
European cultural heritage. In particular columns of ancient temples in Greece and Sicily which support only the architrave are
characterized by small axial load values. This feature together with the slenderness typical of these structural members clearly
highlights as the evaluation of the rocking behaviour is a key aspect of their safety assessment and maintenance. It has to be noted
that the rocking response of rectangular cross-sectional columns modelled as monolithic rigid elements, has been widely investigated
since the first theoretical study carried out by Housner (1963). However, the assumption of monolithic member, although being
widely used and accepted for practical engineering applications, is not valid for more complex systems such as multi-block columns
made of stacked stone blocks, with or without mortar beds. In these cases, in fact, a correct analysis of the system should consider
rocking and sliding phenomena between the individual blocks of the structure. Due to the high non-linearity of the problem, the
evaluation of the dynamic behaviour of multi-block columns has been mostly studied in the literature using a numerical approach
such as the Discrete Element Method (DEM). This paper presents an introductory study about a proposed analytical-numerical
approach for analysing the rocking behaviour of multi-block columns subjected to a sine-pulse type ground motion. Based on the
approach proposed by Spanos (2001) for a system made of two rigid blocks, the Eulero-Lagrange method to obtain the motion
equations of the system is discussed and numerical applications are performed with case studies reported in the literature and with a
real acceleration record. The rocking response of single block and multi-block columns is compared and considerations are made
about the overturning conditions and on the effect of forcing function’s frequency.
.