Numerical analysis of impact events in a centrifugal impact pin mill

Milling is an important operation in many industries, such as mining and pharmaceutical. Although the comminution process during milling has been extensively studied, the material fragmentation mechanisms in a mill are still not well understood partly because of the lack of an understanding on the local stressing and dynamic information under operational conditions in mills. This paper presents a DEM simulation of particle dynamics and impact events in a centrifugal impact pin mill. The main focus is the statistical characteristics of the dominant stressing modes during the milling process. The frequency, velocity and force of the different impact events between particles and mill components, or between particles, are analysed. © 2013 AIP Publishing LLC.

2P/Encke, the Taurid complex NEOs and the Maribo and Sutter's Mill meteorites

Aims. 2P/Encke is a short period comet that was discovered in 1786 and has been extensively observed and studied for more than 200years. The Taurid meteoroid stream has long been linked with 2P/Encke owing to a good match of their orbital elements, even thoughthe comet’s activity is not strong enough to explain the number of observed meteors. Various small near-Earth objects (NEOs) havebeen discovered with orbits that can be linked to 2P/Encke and the Taurid meteoroid stream. Maribo and Sutter’s Mill are CM typecarbonaceous chondrite that fell in Denmark on January 17, 2009 and April 22, 2012, respectively. Their pre-atmospheric orbits placethem in the middle of the Taurid meteoroid stream, which raises the intriguing possibility that comet 2P/Encke could be the parentbody of CM chondrites.
Methods. To investigate whether a relationship between comet 2P/Encke, the Taurid complex associated NEOs, and CM chondritesexists, we performed photometric and spectroscopic studies of these objects in the visible wavelength range. We observed 2P/Enckeand 10 NEOs on August 2, 2011 with the FORS instrument at the 8.2 m Very Large Telescope on Cerro Paranal (Chile).
Results. Images in the R filter, used to investigate the possible presence of cometary activity around the nucleus of 2P/Encke andthe NEOs, show that no resolved coma is present. None of the FORS spectra show the 700 nm absorption feature due to hydratedminerals that is seen in the CM chondrite meteorites. All objects show featureless spectra with moderate reddening slopes at λ < 800nm. Apart for 2003 QC10 and 1999 VT25, which show a flatter spectrum, the spectral slope of the observed NEOs is compatible withthat of 2P/Encke. However, most of the NEOs show evidence of a silicate absorption in lower S/N data at λ > 800 nm, which is notseen in 2P/Encke, which suggests that they are not related.
Conclusions. Despite similar orbits, we find no spectroscopic evidence for a link between 2P/Encke, the Taurid complex NEOs andthe Maribo and Sutter’s Mill meteorites. However, we cannot rule out a connection to the meteorites either, as the spectral differencesmay be caused by secondary alteration of the surfaces of the NEOs. 

A Computational Approach for Simulating P-type Silicon Piezoresistor Using Four Point Bending Setup

The piezoresistance effect is defined as change in resistance due to applied stress. Silicon has a relatively large piezoresistance effect which has been known since 1954. A four point bending setup is proposed and designed to analyze the piezoresistance effect in p-type silicon. This setup is used to apply uniform and uniaxial stress along the <110> crystal direction. The main aim of this work is to investigate the piezoresistive characteristic of p-type resistors as a function of doping concentrations using COMSOL Multiphysics. Simulation results are compared with experimental data.

Synthesis of novel pyrophosphorothiolate-linked dinucleoside cap analogues in a ball mill

Michaelis–Arbuzov reactions of S-aryl disulfide derivatives of 3′-thiothymidine or 5′-thioadenosine with tris(trimethylsilyl) phosphite proceeded in high yields to the corresponding phosphorothiolate monoesters. Subsequent hydrolytic desilylation and phosphate coupling were effected in one-pot using liquid-assisted grinding in a vibration ball mill. Novel 3′,5′- and 5′,5′-pyrophosphorothiolate-linked dinucleoside cap analogues were thereby prepared.

FEM Analysis to Optimally Design End Mill cutters for Milling of Ti-6Al-4V

This paper presents an FEM analysis conducted for optimally designing end mill cutters through verifying the cutting tool forces and stresses for milling Titanium alloy Ti-6Al-4 V. Initially, the theoretical tool forces are calculated by considering the cutting edge on a cutting tool as the curve of an intersection over a spherical/flat surface based on the model developed by Lee & Altinas [1]. Considering the lowest tool forces the cutting tool parameters are taken and optimal design of end mill is decided for different sizes. Then the 3D CAD models of the end mills are developed and used for Finite Element Method to verify the cutting forces for milling Ti-6Al-4 V. The cutting tool forces, stress, strain concentration (s), tool wear, and temperature of the cutting tool with the different geometric shapes are simulated considering Ti-6Al-4 V as work piece material. Finally, the simulated and theoretical values are compared and the optimal design of cutting tool for different sizes are validated. The present approach considers to improve the quality of machining surface and tool life with effects of the various parameters concerning the oblique cutting process namely axial, radial and tangential forces. Various simulated test cases are presented to highlight the approach on optimally designing end mill cutters.