Cutting Edge: Suppression of GM-CSF Expression in Murine and Human T Cells by IL-27

GM-CSF is a potent proinflammatory cytokine that plays a pathogenic role in the CNS inflammatory disease experimental autoimmune encephalomyelitis. As IL-27 alleviates experimental autoimmune encephalomyelitis, we hypothesized that IL-27 suppresses GM-CSF expression by T cells. We found that IL-27 suppressed GM-CSF expression in CD4+ and CD8+ T cells in splenocyte and purified T cell cultures. IL-27 suppressed GM-CSF in Th1, but not Th17, cells. IL-27 also suppressed GM-CSF expression by human T cells in nonpolarized and Th1- but not Th17-polarized PBMC cultures. In vivo, IL-27p28 deficiency resulted in increased GM-CSF expression by CNS-infiltrating T cells during Toxoplasma gondii infection. Although in vitro suppression of GM-CSF by IL-27 was independent of IL-2 suppression, IL-10 upregulation, or SOCS3 signaling, we observed that IL-27-driven suppression of GM-CSF was STAT1 dependent. Our findings demonstrate that IL-27 is a robust negative regulator of GM-CSF expression in T cells, which likely inhibits T cell pathogenicity in CNS inflammation.

Vegetarian diets, low-meat diets and health:a review

OBJECTIVE: To review the epidemiological evidence for vegetarian diets, low-meat dietary patterns and their association with health status in adults. DESIGN: Published literature review focusing primarily on prospective studies and meta-analyses examining the association between vegetarian diets and health outcomes. RESULTS: Both vegetarian diets and prudent diets allowing small amounts of red meat are associated with reduced risk of diseases, particularly CHD and type 2 diabetes. There is limited evidence of an association between vegetarian diets and cancer prevention. Evidence linking red meat intake, particularly processed meat, and increased risk of CHD, cancer and type 2 diabetes is convincing and provides indirect support for consumption of a plant-based diet. CONCLUSIONS: The health benefits of vegetarian diets are not unique. Prudent plant-based dietary patterns which also allow small intakes of red meat, fish and dairy products have demonstrated significant improvements in health status as well. At this time an optimal dietary intake for health status is unknown. Plant-based diets contain a host of food and nutrients known to have independent health benefits. While vegetarian diets have not shown any adverse effects on health, restrictive and monotonous vegetarian diets may result in nutrient deficiencies with deleterious effects on health. For this reason, appropriate advice is important to ensure a vegetarian diet is nutritionally adequate especially for vulnerable groups.

Dietary fat and meat intakes and risk of reflux esophagitis, Barrett's esophagus and esophageal adenocarcinoma

The aim of our study was to investigate whether dietary fat and meat intakes are associated with reflux esophagitis (RE), Barrett's esophagus (BE) and esophageal adenocarcinoma (EAC). In this all-Ireland case-control study, dietary intake data were collected using a food frequency questionnaire in 219 RE patients, 220 BE patients, 224 EAC patients and 256 frequency-matched controls between 2002 and 2005. Unconditional multiple logistic regression analysis was used to examine the association between dietary variables and disease risk using quartiles of intake, to attain odds ratios (ORs) and 95% confidence intervals (95% CIs), while adjusting for potential confounders. Patients in the highest quartile of total fat intake had a higher risk of RE (OR = 3.54; 95% CI = 1.32-9.46) and EAC (OR = 5.44; 95% CI = 2.08-14.27). A higher risk of RE and EAC was also reported for patients in the highest quartile of saturated fat intake (OR = 2.79; 95% CI = 1.11-7.04; OR = 2.41; 95% CI = 1.14-5.08, respectively) and monounsaturated fat intake (OR = 2.63; 95% CI = 1.01-6.86; OR = 5.35; 95% CI = 2.14-13.34, respectively). Patients in the highest quartile of fresh red meat intake had a higher risk of EAC (OR = 3.15; 95% CI = 1.38-7.20). Patients in the highest category of processed meat intake had a higher risk of RE (OR = 4.67; 95% CI = 1.71-12.74). No consistent associations were seen for BE with either fat or meat intakes. Further studies investigating the association between dietary fat and food sources of fat are needed to confirm these results.

Post-slaughter changes in ATP metabolites, Reducing and phosphorylated sugars in chicken meat

The formation of ATP breakdown products in chicken M. pectoralis major post-slaughter is reported. The concentrations of metabolites were followed in chicken breast throughout the carcass processing post-slaughter and during chilled storage. The concentration of glucose remains similar throughout the period whilst that of glucose-6-phosphate decreases linearly. Glucose and glucose-6-phosphate concentrations were inversely related to the pHu of the breast meat throughout chilled storage. Rapid post-mortem glycolysis and high pHu values suggest the occurrence of stress at and pre-slaughter. Whilst ATP, ADP and AMP were rapidly broken down, the concentration of IMP rose rapidly and remained high. Concentrations of inosine, ribose and hypoxanthine increased gradually post-slaughter but an initial increase in ribose phosphate was not sustained. Most of the potential ribose present in chicken meat, believed to be important for flavor formation, remains bound in the form of inosine and IMP. There is evidence that additional breakdown pathways for ribose and ribose-5-phosphate may deplete the concentrations of these precursors.

Anisotropy of single crystal 3C-SiC during nanometric cutting

3C–SiC (the only polytype of SiC that resides in a diamond cubic lattice structure) is a relatively new material that exhibits most of the desirable engineering properties required for advanced electronic applications. The anisotropy exhibited by 3C–SiC during its nanometric cutting is significant, and the potential for its exploitation has yet to be fully investigated. This paper aims to understand the influence of crystal anisotropy of 3C–SiC on its cutting behaviour. A molecular dynamics simulation model was developed to simulate the nanometric cutting of single-crystal 3C–SiC in nine (9) distinct combinations of crystal orientations and cutting directions, i.e. (1?1?1) <-1?1?0>, (1?1?1) <-2?1?1>, (1?1?0) <-1?1?0>, (1?1?0) <0?0?1>, (1?1?0) <1?1?-2>, (0?0?1) <-1?1?0>, (0?0?1) <1?0?0>, (1?1?-2) <1?-1?0> and (1?-2?0) <2?1?0>.

In order to ensure the reliability of the simulation results, two separate simulation trials were carried out with different machining parameters. In the first trial, a cutting tool rake angle of -25°, d/r (uncut chip thickness/cutting edge radius) ratio of 0.57 and cutting velocity of 10 m s-1 were used whereas a second trial was done using a cutting tool rake angle of -30°, d/r ratio of 1 and cutting velocity of 4 m s-1. Both the trials showed similar anisotropic variation.

The simulated orthogonal components of thrust force in 3C–SiC showed a variation of up to 45%, while the resultant cutting forces showed a variation of 37%. This suggests that 3C–SiC is highly anisotropic in its ease of deformation. These results corroborate with the experimentally observed anisotropic variation of 43.6% in Young's modulus of 3C–SiC. The recently developed dislocation extraction algorithm (DXA) [1, 2] was employed to detect the nucleation of dislocations in the MD simulations of varying cutting orientations and cutting directions. Based on the overall analysis, it was found that 3C–SiC offers ease of deformation on either (1?1?1) <-1?1?0>, (1?1?0) <0?0?1>, or (1?0?0) <1?0?0> setups.

Shear instability of nanocrystalline silicon carbide during nanometric cutting

The shear instability of the nanoscrystalline 3C-SiC during nanometric cutting at a cutting speed of 100?m/s has been investigated using molecular dynamics simulation. The deviatoric stress in the cutting zone was found to cause sp3-sp2 disorder resulting in the local formation of SiC-graphene and Herzfeld-Mott transitions of 3C-SiC at much lower transition pressures than that required under pure compression. Besides explaining the ductility of SiC at 1500?K, this is a promising phenomenon in general nanoscale engineering of SiC. It shows that modifying the tetrahedral bonding of 3C-SiC, which would otherwise require sophisticated pressure cells, can be achieved more easily by introducing non-hydrostatic stress conditions.

Multiscale simulation of nanometric cutting of single crystal copper and its experimental validation

In this paper a multiscale simulation study was carried out in order to gain in-depth understanding of machining mechanism of nanometric cutting of single crystal copper. This study was focused on the effects of crystal orientation and cutting direction on the attainable machined surface quality. The machining mechanics was analyzed through cutting forces, chip formation morphology, generation and evolution of defects and residual stresses on the machined surface. The simulation results showed that the crystal orientation of the copper material and the cutting direction significantly influenced the deformation mechanism of the workpiece materials during the machining process. Relatively lower cutting forces were experienced while selecting crystal orientation family {1 1 1}. Dislocation movements were found to concentrate in front of the cutting chip while cutting on the (1 1 1) surface along the View the MathML source cutting direction thus, resulting in much smaller damaged layer on the machined surface, compared to other orientations. This crystal orientation and cutting direction therefore recommended for nanometric cutting of single crystal copper in practical applications. A nano-scratching experiment was performed to validate the above findings.

Influence of microstructure on the cutting behaviour of silicon

We use molecular dynamics simulation to study the mechanisms of plasticity during cutting of monocrystalline and polycrystalline silicon. Three scenarios are considered: (i) cutting a single crystal silicon workpiece with a single crystal diamond tool, (ii) cutting a polysilicon workpiece with a single crystal diamond tool, and (iii) cutting a single crystal silicon workpiece with a polycrystalline diamond tool. A long-range analytical bond order potential is used in the simulations, providing a more accurate picture of the atomic-scale mechanisms of brittle fracture, ductile plasticity, and structural changes in silicon. The MD simulation results show a unique phenomenon of brittle cracking typically inclined at an angle of 45° to 55° to the cut surface, leading to the formation of periodic arrays of nanogrooves in monocrystalline silicon, which is a new insight into previously published results. Furthermore, during cutting, silicon is found to undergo solid-state directional amorphisation without prior Si-I to Si-II (beta tin) transformation, which is in direct contrast to many previously published MD studies on this topic. Our simulations also predict that the propensity for amorphisation is significantly higher in single crystal silicon than in polysilicon, signifying that grain boundaries eases the material removal process.

Simulation of three-dimension cutting force and tool deflection in the end milling operation based on finite element method

This paper presents a 3D simulation system which is employed in order to predict cutting forces and tool deflection during end-milling operation. In order to verify the accuracy of 3D simulation, results (cutting forces and tool deflection) were compared with those based on the theoretical relationships, in terms of agreement with experiments. The results obtained indicate that the simulation is capable of predicting the cutting forces and tool deflection.