COD removal from textile industry effluent: pilot plant studies

This work involved the treatment of industrial waste water from a nylon carpet printing plant. As dyeing of nylon is particularly difficult, acid dyes, fixing agents, thickeners, finishing agents, are required for successful colouration and cause major problems with the plant's effluent disposal in terms of chemical oxygen demand (COD). Granular activated carbon (GAC) Filtrasorb 400 was used to treat a simulated process plant effluent containing all the pollutants. Equilibrium isotherm experiments were established and experimental data obtained showed good empirical correlation with Langmuir isotherm theory. Column experimental data, in terms of COD were correlated using the bed depth service time (BDST) model. Solid phase loading in the columns were found to approach that in equilibrium studies indicating an efficient use of adsorbent. The results from the BDST model were then used to design a pilot adsorption rig at the plant. The performance of the pilot plant column were accurately predicted by scale-up from the bench scale columns. (C) 2001 Elsevier Science BN. All rights reserved.

Textile wastewater treatment using granular activated carbon adsorption in fixed beds

This work involved the treatment of industrial wastewater from a nylon carpet printing plant which currently receives no treatment and is discharged to sea. As nylon is particularly difficult to dye, acid dyes are required for successful coloration and cause major problems with the plant's effluent disposal in terms of color removal. Granular activated carbon Filtrasorb 400 was used to treat a ternary solution of acid dyes and the process plant effluent containing the dyes in a fixed-bed column system. Experimental data were correlated using the bed depth service time (BDST) model to previously published work by the authors for single dye adsorption. The results were expressed in terms of the BDST adsorption capacity, in milligrams of adsorbate per gram of adsorbent, and indicated that there was a 12-25% decrease iri adsorption capacity in the ternary system compared to the single component system; This reduction has been attributed to competitive adsorption occurring in the ternary component system. Dye adsorption from the process plant effluent showed an approximate 65% decrease in adsorption capacity compared to the ternary solution system. This has been attributed to interference caused by the other colorless textile effluent pollutants found in the process wastewater. A chemical oxygen demand analysis on these components indicated that the dyes accounted for only 14% of the total oxygen demand.

Biodegradation and biosorption of acid anthraquinone dye

The acid anthraquinone dye Tectilon Blue (TB4R) is a major coloured component from the aqueous effluent of a carpet printing plant in Northern Ireland. The aerobic biodegradation of TB4R has been investigated experimentally in batch systems, using three strains of bacteria, namely, Bacillus gordonae (NCIMB 12553), Bacillus benzeovorans (NCIMB 12555) and Pseudomonas putida (NCIMB 9776). All three strains successfully decolourised the dye, and results were correlated using Michaelis-Menten kinetic theory. A recalculation of the reaction rate constants, to account for biosorption, gave an accurate simulation of the colour removal over a 24-h period. Up to 19% of the decolorisation was found to be caused by biosorption of the dye onto the biomass, with the majority of the decolorisation caused by utilisation of the dye by the bacteria. The reaction rate was found to be intermediate between zero and first order at dye concentrations of 200-1000 mg/l. (C) 2000 Elsevier Science Ltd. All rights reserved.

Alternative antecedents, probabilities, and the suppression of fallacies in Wason's selection task

Three experiments examined the influence of a second rule on the pattern of card selections on Wason's selection task. In Experiment 1 participants received a version of the task with a single test rule or one of two versions of the task with the same original test rule together with a second rule. The probability of q was manipulated in the two-rules conditions by varying the size of the antecedent set in the second rule. The results showed a significant suppression of q card and not-p card selections in the alternative-rule conditions, but no difference as a function of antecedent set size. In Experiment 2 the size of the antecendent set in the two-rules conditions was manipulated using the context of a computer printing double-sided cards. The results showed a significant reduction of q card selections in the two-rules conditions, but no effect of p set size. In Experiment 3 the scenario accompanying the rule was manipulated, and it specified a single alternative antecedent or a number of alternative antecedents. The q card selection rates were not affected by the scenario manipulation but again were suppressed by the presence of a second rule. Our results suggest that people make inferences about the unseen side of the cards when engaging with the task and that these inferences are systematically influenced by the presence of a second rule, but are not influenced by the probabilistic characteristics of this rule. These findings are discussed in the context of decision theoretic views of selection task performance (Oaksford Chater, 1994).

Rapid design of biorthogonal wavelet transforms

A rapid design methodology for biorthogonal wavelet transform cores has been developed based on a generic, scaleable architecture for wavelet filters. The architecture offers efficient hardware utilisation by combining the linear phase property of biorthogonal filters with decimation in a MAC-based implementation. The design has been captured in VHDL and parameterised in terms of wavelet type, data word length and coefficient word length. The control circuit is embedded within the cores and allows them to be cascaded without any interface glue logic for any desired level of decomposition. The design time to produce silicon layout of a biorthogonal wavelet system is typically less than a day. The silicon cores produced are comparable in area and performance to hand-crafted designs, The designs are portable across a range of foundries and are also applicable to FPGA and PLD implementations.

Agitating for a design and regeneration agenda in a postconflict city: the case of Belfast

Introduction

Belfast has been a focus of academic attention for the last forty years with most interest centred on various aspects of ‘the Troubles’. Where there has been interest in the built environment, it has largely been about how the ‘security situation’ impacted directly on architecture and on the design and layout of social housing. This paper seeks to go beyond this to explore how the political- administrative culture of ‘the Troubles’ interacted with ‘normal’ market forces to shape the central area of the city, and to consider the responses of a recently formed activist group, known as the Forum for Alternative Belfast (hereafter referred to as the Forum). The paper is written by three of the directors of the Forum.1 Moreover, the empirical research presented here was undertaken by the Forum as part of a campaign to address issues relating to the design, layout and quality of Belfast’s built environment. In the longstanding tradition of participant observation working within an action-research paradigm, the participants have attempted to offer an account that is evidentially and purposefully selfcritical and reflective. It is of course recognised that while this approach offers many positive attributes, such as phenomenological access through immersion in the project, it also has the potential to bring compromise on research detachment and objectivity.2 To address the latter, the authors have attempted
to avoid polemical argument, and to support claims with primary or secondary research evidence. The authors also acknowledge that action-research has a chequered history; however, they would argue
that their approach is faithful to a concept that sees ‘research’ defined as understanding and ‘action’ defined as seeking change. The Forum’s very purpose is to seek change, but to do this requires evidence, collaboration and demonstration. And in this sense, it is a learning process for all participants, including the research activists, government officials, community organisations and students. The authors also recognise the complexity of factors that affect urban management and change, particularly in a city such as Belfast, which has had to cope with political violence for over thirty years. And they appreciate that in the context of conflict, governance is skewed to cope with political realities. Hamdi reminds us, however, that in practice there is an ‘important dialectic between top-down planning, with its formal and designed laws and structures, and bottom-up selforganizing collectivism—those “quantum and emergent systems” which Jane Jacobs argued long ago give cities their life and order.’3

Confined Site Construction: Issues Regarding Implementation of Health and Safety

The objective of this paper is to identify the various managerial constraints, difficulties and issues encountered and resulting strategies adopted, to aid in the management of the various and often complex health and safety concerns, which occur within a confined construction site. This is achieved through classifying the various managerial burdens encountered with the numerous strategies adopted, to ensure the successful management of such confined environments within the realm of health and safety. Through an extensive literature review and detailed interviews, a comprehensive insight into the health and safety concerns within a confined construction site environment is portrayed. The leading managerial strategies to the management of health and safety on confined construction sites may be listed as follows; (1) Traffic Management Plan, (2) Effective Resource Management Plan, (3) Temporary Facilities Management Plan, (4) Safe System of Work Plan, (5) Site Safety Plan, (6) Design Site Layout, (7) Space Management Plan, (8) Effective Program Management, and (9) Space Scheduling. Based on the research, it can be concluded, that through effective management of these issues identified coupled with implementing the various strategies highlighted; successful management of health and safety within a confined construction site environment is attainable.

A scalable packet sorting circuit for high-speed WFQ packet scheduling

A novel implementation of a tag sorting circuit for a weighted fair queueing (WFQ) enabled Internet Protocol (IP) packet scheduler is presented. The design consists of a search tree, matching circuitry, and a custom memory layout. It is implemented using 130-nm silicon technology and supports quality of service (QoS) on networks at line speeds of 40 Gb/s, enabling next generation IP services to be deployed.

Value creation and value claiming in strategic outsourcing decisions: A resource contingency perspective

This study integrates the concepts of value creation and value claiming into a theoretical framework that emphasizes the dependence of resource value maximization on value-claiming motivations in outsourcing decisions. To test this theoretical framework, it develops refutable implications to explain the firm's outsourcing decision, and it uses data from 178 firms in the publishing and printing industry on outsourcing of application services. The results show that in outsourcing decisions, resource value and transaction costs are simultaneously considered and that outsourcing decisions are dependent on alignment between resource and transaction attributes. The findings support a resource contingency view that highlights value-claiming mechanisms as resource contingency in interorganizational strategic decisions.

Sensing Spaces:A Body-oriented Architectural Design Education

The contemporary dominance of visuality has turned our understanding of space into a mode of unidirectional experience that externalizes other sensual capacities of the body while perceiving the built environment. This affects not only architectural practice but also architectural education when an introduction to the concept of space is often challenging, especially for the students who have limited spatial and sensual training. Considering that an architectural work is not perceived as a series of retinal pictures but as a repeated multi-sensory experience, the problem definitions in the design studio need to be disengaged from the dominance of a ‘focused vision’ and be re-constructed in a holistic manner. A method to address this approach is to enable the students to refer to their own sensual experiences of the built environment as a part of their design processes. This paper focuses on a particular approach to the second year architectural design teaching which has been followed in the Department of Architecture at Izmir University of Economics for the last three years. The very first architectural project of the studio and the program, entitled ‘Sensing Spaces’, is conducted as a multi-staged design process including ‘sense games, analyses of organs and their interpretations into space’. The objectives of this four-week project are to explore the sense of space through the design of a three-dimensional assembly, to create an awareness of the significance of the senses in the design process and to experiment with re-interpreted forms of bodily parts. Hence, the students are encouraged to explore architectural space through their ‘tactile, olfactory, auditory, gustative and visual stimuli’. In this paper, based on a series of examples, architectural space is examined beyond its boundaries of structure, form and function, and spatial design is considered as an activity of re-constructing the built environment through the awareness of bodily senses.

A TMA De-Arraying Method for High Throughput Biomarker Discovery in Tissue Research

Background: Tissue MicroArrays (TMAs) represent a potential high-throughput platform for the analysis and discovery of tissue biomarkers. As TMA slides are produced manually and subject to processing and sectioning artefacts, the layout of TMA cores on the final slide and subsequent digital scan (TMA digital slide) is often disturbed making it difficult to associate cores with their original position in the planned TMA map. Additionally, the individual cores can be greatly altered and contain numerous irregularities such as missing cores, grid rotation and stretching. These factors demand the development of a robust method for de-arraying TMAs which identifies each TMA core, and assigns them to their appropriate coordinates on the constructed TMA slide.

Methodology: This study presents a robust TMA de-arraying method consisting of three functional phases: TMA core segmentation, gridding and mapping. The segmentation of TMA cores uses a set of morphological operations to identify each TMA core. Gridding then utilises a Delaunay Triangulation based method to find the row and column indices of each TMA core. Finally, mapping correlates each TMA core from a high resolution TMA whole slide image with its name within a TMAMap.

Conclusion: This study describes a genuine robust TMA de-arraying algorithm for the rapid identification of TMA cores from digital slides. The result of this de-arraying algorithm allows the easy partition of each TMA core for further processing. Based on a test group of 19 TMA slides (3129 cores), 99.84% of cores were segmented successfully, 99.81% of cores were gridded correctly and 99.96% of cores were mapped with their correct names via TMAMaps. The gridding of TMA cores were also extensively tested using a set of 113 pseudo slide (13,536 cores) with a variety of irregular grid layouts including missing cores, rotation and stretching. 100% of the cores were gridded correctly.

Comparison of techniques to screen and characterize bacteria-specific hybridomas for high-quality monoclonal antibodies selection

Antibodies are are very important materials for diagnostics. A rapid and simple hybridoma screening method will help in delivering specific monoclonal antibodies. In this study, we systematically developed the first antibody array to screen for bacteria-specific monoclonal antibodies using Listeria monocytogenes as a bacteria model. The antibody array was developed to expedite the hybridoma screening process by printing hybridoma supernatants on a glass slide coated with an antigen of interest. This screening method is based on the binding ability of supernatants to the coated antigen. The bound supernatants were detected by a fluorescently labeled anti-mouse immunoglobulin. Conditions (slide types, coating, spotting, and blocking buffers) for antibody array construction were optimized. To demonstrate its usefulness, antibody array was used to screen a sample set of 96 hybridoma supernatants in comparison to ELISA. Most of the positive results identified by ELISA and antibody array methods were in agreement except for those with low signals that were undetectable by antibody array. Hybridoma supernatants were further characterized with surface plasmon resonance to obtain additional data on the characteristics of each selected clone. While the antibody array was slightly less sensitive than ELISA, a much faster and lower cost procedure to screen clones against multiple antigens has been demonstrated. (C) 2011 Elsevier Inc. All rights reserved.

Chip design for high-performance DSP

Advances in silicon technology have been a key development in the realisation of many telecommunication and signal processing systems. In many cases, the development of application-specific digital signal processing (DSP) chips is the most cost-effective solution and provides the highest performance. Advances made in computer-aided design (CAD) tools and design methodologies now allow designers to develop complex chips within months or even weeks. This paper gives an insight into the challenges and design methodologies of implementing advanced highperformance chips for DSP. In particular, the paper reviews some of the techniques used to develop circuit architectures from high-level descriptions and the tools which are then used to realise silicon layout.

The social consequences of broken urban structures: a case study of Belfast

This article explores how the design and layout of the urban environment can have significant social impacts on working class communities whose access to employment and other necessary services depends largely on public transport and safe walk-able streets. It does so by considering a case study of Belfast. Although Belfast has a distinctive recent history as the site of political violence and territorial division, it also has a spatial configuration that emerged out of a modernising roads and redevelopment programme in the 1960s and 1970s. However, an understanding of contemporary Belfast, particularly its urban structure and form, requires n analysis of how the social impacts of such ubiquitous regional and urban planning practices were not addressed. The article argues that a culture of ‘politically safe’ bureaucratic inaction developed during the ‘war years’ has been sustained in the ‘new democracy’. In turn, this has had significant consequences for the functioning of the city. Major areas of derelict land around the city core together with the impediments created by regional road infrastructure have combined to create a doughnut city that, on the one hand, facilitates a commuting middle class, while on the other, discriminates against the poorest inner city communities. The article goes on to examine how an activist urban design group, known as the Forum for Alternative Belfast, has responded to these challenges. It focuses particularly on action-research undertaken during its 2010 Summer School which aimed to address issues of disconnection in inner North Belfast that affect some of the most territorialised and deprived communities in the city.