Bord Gais Above Ground Installation:Flow

The objective was to design a treatment that would dematerialise an above ground gas installation on the Liffey quayside while still meeting the functional requirement to ventilate the pressure reducing chamber inside. To do this we wrapped the installation in a skin of glass that allows the air to enter below the skin and to escape behind the parapet. The installation building is covered in plastic sequins and the glass is treated with alternating bands of dichroic film. The flow of air causes the sequins to shimmer reflecting spots of coloured light back onto the glass. At night a similar effect is created by lighting concealed within the outer skin. This project won a commendation in the RIAI Awards 2010, and an AAI award in 2011. It was published in New Irish Architecture 26. The British architectural historian William JR Curtis described it as ‘a beautiful understated little kiosk.’

Design and Practice in Architectural Theory Education

Benefiting from design in theory learning is not common in architecture schools. The general practice is to design in studio and to theorise in lectures. In the undergraduate module History and Theory in Architecture II at Queen’s University Belfast, students attend interactive lectures, participate in reading group discussions, design TextObjects, and write essays. TextObjects contain textual, audio and/or graphic representations that highlight a single concept or a complex set of issues derived from readings. Students experiment with diverse media, such as filmmaking, photography, and graphic design, some of which they experience for the first time. Lectures and readings revolve around theories of architectural representation, media and communication, which are practiced through TextObjects. This is a new way to link theory and practice in architectural education. Through action research, this study analyses this innovative teaching method called TextObject, which brings design and practice into architectural theory education to stimulate students towards critical thinking. The pedagogical research of architectural theoretician Necdet Teymur (1992, 1996, 2002) underlies the study.

Early Implementation of BIM into a Cold-Formed Steel Design/ Fabricator and an Architectural/Planning Consultancy

There is a broad consensus surrounding the ability of building information modelling (BIM) to positively impact a project by enabling greater collaboration. This paper aims to examine the development of BIM and how it can contribute to the evermore present and growing cold-formed steel (CFS) industry. This is achieved thorough a comprehensive literature review and four exploratory interviews with industry experts. Work has been carried out, for the first time, alongside one of the UK’s largest CFS Designer/Fabricators in conjunction with Northern Ireland’s leading Architectural and Town Planning Consultants in the identification and dissemination of information. The capabilities of BIM have been investigated through modeling of simple CFS structures n consultation with the project partners. By scrutinising the literature and associated interviews, the primary opportunities, as well as barriers, of BIM implementation have been investigated in the context of these companies. It is essential to develop greater understanding of the flexibility, adaptability and interoperability of BIM software as the UK construction industry faces a daunting challenge; fully collaborative 3D BIM as required by the UK Government under the “Government Construction Strategy” by 2016 in all public sector projects. This paper, and the wider study that it stems from, approaches the problem from a new angle, from sections of the construction industry that have not yet fully embedded BIM.

Building Clouds Drifting Walls:Year One Design Studio: A Critical Appraisal

This is a Booklet about a first year design studio in a school of architecture. It describes and reflects on changes that happened in the course over a three year period starting September 2000. The Studio is made up of students from mainstream architecture, and dual courses with landscape and engineering. The booklet is for those who are thinking of studying architecture. It might also be for those already learning and teaching architecture who want to see how other design studios work.

ArchiBabel: Tracing the Writing Architecture Project in Architectural Education

Though much recent scholarship has investigated the potential of writing in creative practice (including visual arts, drama, even choreography), there are few models in the literature which discuss writing in the context of architectural education. The paper presented here aims to address this dearth of pedagogical research, analysing the cross-disciplinary Writing Architecture Project based in the undergraduate course of the School of Architecture at QUB. Over the course of four years, teaching staff, in partnership with the university's Learning Development Service, technicians and specialist librarians, have addressed an unfortunately persistent struggle for both architecture students and professionals alike to research and construct argument in written form. The paper examines the current problem as identified in the literature before analysing the efficacy of the variety of teaching methods used in the Writing Architecture Project, with conclusions about the project’s success and continuing challenges.

Architectural synthesis of an image processing algorithm using IRIS

Details are presented of the IRIS synthesis system for high-performance digital signal processing. This tool allows non-specialists to automatically derive VLSI circuit architectures from high-level, algorithmic representations, and provides a quick route to silicon implementation. The applicability of the system is demonstrated using the design example of a one-dimensional Discrete Cosine Transform circuit.

Changing Paradigms in Space Theories:Recapturing 20th Century Architectural History

The concept of space entered architectural history as late as 1893. Studies in art opened up the discussion, and it has been studied in various ways in architecture ever since. This article aims to instigate an additional reading to architectural history, one that is not supported by "isms" but based on space theories in the 20th century. Objectives of the article are to bring the concept of space and its changing paradigms to the attention of architectural researchers, to introduce a conceptual framework to classify and clarify theories of space, and to enrich the discussions on the 20th century architecture through theories that are beyond styles. The introduction of space in architecture will revolve around subject-object relationships, three-dimensionality and senses. Modern space will be discussed through concepts such as empathy, perception, abstraction, and geometry. A scientific approach will follow to study the concept of place through environment, event, behavior, and design methods. Finally, the research will look at contemporary approaches related to digitally supported space via concepts like reality-virtuality, mediated experience, and relationship with machines.

A network architectural style for real-time systems: NaSr

Inter-component communication has always been of great importance in the design of software architectures and connectors have been considered as first-class entities in many approaches [1][2][3]. We present a novel architectural style that is derived from the well-established domain of computer networks. The style adopts the inter-component communication protocol in a novel way that allows large scale software reuse. It mainly targets real-time, distributed, concurrent, and heterogeneous systems.

The Outcomes of Cross-Cultural Adjustment: A Case of British Expatriates Working on International Architectural, Engineering and Construction Assignments

The main aim of this study is to investigate the consequences of cross-cultural adjustment in an under researched sample of British expatriates working on International Architectural, Engineering and Construction (AEC) assignments. Adjustment is the primary outcome of an expatriate assignment. According to Bhaskar-Srinivas et al., (2005), Harrison et al., (2004) it is viewed to affect other work related outcomes which could eventually predict expatriate success. To address the scarcity of literature on expatriate management in the AEC sector, an exploratory design was adopted. Phase one is characterised by extensive review of extant literature, whereas phase two was qualitative exploration from British expatriates’ perspective; here seven unstructured interviews were carried out. Further, cognitive mapping analysis through Banaxia decision explorer software was conducted to develop a theoretical framework and propose various hypotheses. The findings imply that British AEC firms could sustain their already established competitive advantage in the global marketplace by acknowledging the complexity of international assignments, prioritising expatriate management and offering a well-rounded support to facilitate expatriate adjustment and ultimately achieve critical outcomes like performance, assignment completion and job satisfaction.

The outcomes of cross-cultural adjustment: A case of British expatriates working on international architectural, engineering and construction assignments

The main aim of this study is to investigate the consequences of cross-cultural adjustment in an under researched sample of British expatriates working on International Architectural, Engineering and Construction (AEC) assignments. Adjustment is the primary outcome of an expatriate assignment. According to Bhaskar-Srinivas et al., (2005), Harrison et al., (2004) it is viewed to affect other work related outcomes which could eventually predict expatriate success. To address the scarcity of literature on expatriate management in the AEC sector, an exploratory design was adopted. Phase one is characterised by extensive review of extant literature, whereas phase two was qualitative exploration from British expatriatesÕ perspective; here seven unstructured interviews were carried out. Further, cognitive mapping analysis through Banaxia decision explorer software was conducted to develop a theoretical framework and propose various hypotheses. The findings imply that British AEC firms could sustain their already established competitive advantage in the global marketplace by acknowledging the complexity of international assignments, prioritising expatriate management and offering a well-rounded support to facilitate expatriate adjustment and ultimately achieve critical outcomes like performance, assignment completion and job satisfaction.

Shortening design time through multiplatform simulations with a portable OpenCL golden-model: the LDPC decoder case

Hardware designers and engineers typically need to explore a multi-parametric design space in order to find the best configuration for their designs using simulations that can take weeks to months to complete. For example, designers of special purpose chips need to explore parameters such as the optimal bitwidth and data representation. This is the case for the development of complex algorithms such as Low-Density Parity-Check (LDPC) decoders used in modern communication systems. Currently, high-performance computing offers a wide set of acceleration options, that range from multicore CPUs to graphics processing units (GPUs) and FPGAs. Depending on the simulation requirements, the ideal architecture to use can vary. In this paper we propose a new design flow based on OpenCL, a unified multiplatform programming model, which accelerates LDPC decoding simulations, thereby significantly reducing architectural exploration and design time. OpenCL-based parallel kernels are used without modifications or code tuning on multicore CPUs, GPUs and FPGAs. We use SOpenCL (Silicon to OpenCL), a tool that automatically converts OpenCL kernels to RTL for mapping the simulations into FPGAs. To the best of our knowledge, this is the first time that a single, unmodified OpenCL code is used to target those three different platforms. We show that, depending on the design parameters to be explored in the simulation, on the dimension and phase of the design, the GPU or the FPGA may suit different purposes more conveniently, providing different acceleration factors. For example, although simulations can typically execute more than 3x faster on FPGAs than on GPUs, the overhead of circuit synthesis often outweighs the benefits of FPGA-accelerated execution.

Infra-Éireann: Making Ireland Modern - Irish Pavilion for the 14th Architectural biennale, Venice 2014.

After an open competition, we were selected to commission, curate and design the Irish pavilion for the Venice biennale 2014. Our proposal engage with the role of infrastructure and architecture in the cultural development of the new Irish state 1914-2014. This curatorial programme was realised in a demountable, open matrix pavilion measuring 12 x 5 x 6 metres.

How modernity is absorbed into national cultures usually presupposes an attachment to previous conditions and a desire to reconcile the two. In an Irish context, due to the processes of de-colonisation and political independence, this relationship is more complicated.

In 1914, Ireland was largely agricultural and lacked any significant industrial complex. The construction of new infrastructures after independence in 1921 became central to the cultural imagining of the new nation. The adoption of modernist architecture was perceived as a way to escape the colonial past. As the desire to reconcile cultural and technological aims developed, these infrastructures became both the physical manifestation and concrete identity of the new nation with architecture an essential element in this construct.

Technology and infrastructure are inherently cosmopolitan. Beginning with the Shannon hydro-electric facility at Ardnacrusha (1929) involving the German firm of Siemens-Schuckert, Ireland became a point of various intersections between imported international expertise and local need. By the turn of the last century, it had become one of the most globalised countries in the world, site of the European headquarters of multinationals such as Google and Microsoft. Climatically and economically expedient to the storing and harvesting of data, Ireland has subsequently become an important repository of digital information farmed in large, single-storey sheds absorbed into dispersed suburbs. In 2013, it became the preferred site for Intel to design and develop its new microprocessor board, the Galileo, a building block for the internet of things.

The story of the decades in between, of shifts made manifest in architecture and infrastructure, from the policies of economic protectionism to the embracing of the EU is one of the influx of technologies and cultural references into a small country on the edges of Europe: Ireland as both a launch-pad and testing ground for a series of aspects of designed modernity.

Transcending Boundaries of Creativity: Active learning in the Design Studio

This essay investigates the changing dynamics of interaction and paradigm of communication in the design studio. It analyses the process of practical implementation of interactive tools in architectural education which placed the
diversity of students’ cultural experiences, contextual awareness and individual interests as crucial resource for design innovation and inquiry. Building on Brian Lawson’s thesis on creativity in design thinking, this research project undertook
comprehensive investigation of students’ satisfaction of their roles in the studio and the room for liberal thought they are given to elaborate on genuine approach to architectural matters. The cyclical development of interactive learning strategy is explored through two different settings: first, it analyses architectural students’ position as passive/active in the studio, considering their relationships with tutors’ ideals; second, it reports on empirical strategy of students-led workshops at British schools of architecture, during which students have taken the lead of their creative design agenda. The practical implementation of interactive learning tools proved influential in helping students to personalize their design direction and to build a sense of confidence and independence.