Process-variation resilient and voltage-scalable dct architecture for robust low-power computing

In this paper, we present a novel discrete cosine transform (DCT) architecture that allows aggressive voltage scaling for low-power dissipation, even under process parameter variations with minimal overhead as opposed to existing techniques. Under a scaled supply voltage and/or variations in process parameters, any possible delay errors appear only from the long paths that are designed to be less contributive to output quality. The proposed architecture allows a graceful degradation in the peak SNR (PSNR) under aggressive voltage scaling as well as extreme process variations. Results show that even under large process variations (±3σ around mean threshold voltage) and aggressive supply voltage scaling (at 0.88 V, while the nominal voltage is 1.2 V for a 90-nm technology), there is a gradual degradation of image quality with considerable power savings (71% at PSNR of 23.4 dB) for the proposed architecture, when compared to existing implementations in a 90-nm process technology. © 2006 IEEE.

VEDA:Variation-aware energy-efficient discrete Wavelet Transform architecture

In this paper, we present a unified approach to an energy-efficient variation-tolerant design of Discrete Wavelet Transform (DWT) in the context of image processing applications. It is to be noted that it is not necessary to produce exactly correct numerical outputs in most image processing applications. We exploit this important feature and propose a design methodology for DWT which shows energy quality tradeoffs at each level of design hierarchy starting from the algorithm level down to the architecture and circuit levels by taking advantage of the limited perceptual ability of the Human Visual System. A unique feature of this design methodology is that it guarantees robustness under process variability and facilitates aggressive voltage over-scaling. Simulation results show significant energy savings (74% - 83%) with minor degradations in output image quality and avert catastrophic failures under process variations compared to a conventional design. © 2010 IEEE.

Process variation tolerant low power DCT architecture

2-D Discrete Cosine Transform (DCT) is widely used as the core of digital image and video compression. In this paper, we present a novel DCT architecture that allows aggressive voltage scaling by exploiting the fact that not all intermediate computations are equally important in a DCT system to obtain "good" image quality with Peak Signal to Noise Ratio(PSNR) > 30 dB. This observation has led us to propose a DCT architecture where the signal paths that are less contributive to PSNR improvement are designed to be longer than the paths that are more contributive to PSNR improvement. It should also be noted that robustness with respect to parameter variations and low power operation typically impose contradictory requirements in terms of architecture design. However, the proposed architecture lends itself to aggressive voltage scaling for low-power dissipation even under process parameter variations. Under a scaled supply voltage and/or variations in process parameters, any possible delay errors would only appear from the long paths that are less contributive towards PSNR improvement, providing large improvement in power dissipation with small PSNR degradation. Results show that even under large process variation and supply voltage scaling (0.8V), there is a gradual degradation of image quality with considerable power savings (62.8%) for the proposed architecture when compared to existing implementations in 70 nm process technology.

Characterization of the Kepler-101 planetary system with HARPS-N. A hot super-Neptune with an Earth-sized low-mass companion

We characterize the planetary system Kepler-101 by performing a combined differential evolution Markov chain Monte Carlo analysisof Kepler data and forty radial velocities obtained with the HARPS-N spectrograph. This system was previously validated and iscomposed of a hot super-Neptune, Kepler-101b, and an Earth-sized planet, Kepler-101c. These two planets orbit the slightly evolvedand metal-rich G-type star in 3.49 and 6.03 days, respectively. With mass Mp = 51.1+5.1−4.7 M⊕, radius Rp = 5.77+0.85−0.79 R⊕, and density ρp = 1.45+0.83 −0.48 g cm−3, Kepler-101b is the first fully characterized super-Neptune, and its density suggests that heavy elements makeup a significant fraction of its interior; more than 60% of its total mass. Kepler-101c has a radius of 1.25+0.19−0.17 R⊕, which implies theabsence of any H/He envelope, but its mass could not be determined because of the relative faintness of the parent star for highly precise radial-velocity measurements (Kp = 13.8) and the limited number of radial velocities. The 1σ upper limit, Mp < 3.8 M⊕, excludes a pure iron composition with a probability of 68.3%. The architecture of the planetary system Kepler-101 − containing aclose-in giant planet and an outer Earth-sized planet with a period ratio slightly larger than the 3:2 resonance − is certainly of interest for scenarios of planet formation and evolution. This system does not follow the previously reported trend that the larger planet has the longer period in the majority of Kepler systems of planet pairs with at least one Neptune-sized or larger planet.

Out of the Shadows: A one day investigation of the politics of architecture explored through the lens of post-conflict, Belfast

This booklet covers the itinerary and some of the findings of a day-long visit to Belfast on the 7th November 2014 by Peter Oborn; Vice President International of the Royal Institute of British Architects. His visit was in response to a motion submitted to the RIBA council (19.05.2014) calling for the suspension of the Israeli Association of United Architects from the International Union of Architects. Despite members of council speaking against the motion it was carried; 23 members voting for, 16 against, and 10 abstentions. Subsequently the RIBA came under considerable pressure to consider its position in such critical contexts. This visit to Belfast was part of a wider fact-finding mission and evidence taking. At its heart was the question: 'Is it appropriate for the institute (RIBA) to engage with communities facing civil conflict and/or natural disaster and, if so, how it can do so most effectively.' The visit was facilitated by Ruth Morrow, Professor of Architecture, School of Planning, Architecture & Civil Engineering, Queen's University Belfast, and Martin Hare, Royal Society of Ulster Architects (RSUA) president.

Parker Morris and the economies of the Fordist house

The Parker Morris report of 1961 attempted, through the application of scientific principles, to define the minimum living space standards needed to accommodate household activities. But while early modernist research into ideas of existenzminimum were the work of avant-garde architects and thinkers, this report was commissioned by the British State. This normalization of scientific enquiry into space can be considered not only a response to new conditions in the mass production of housing – economies of scale, prefabrication, system-building and modular coordination – but also to the post-war boom in consumer goods. The domestic interior was assigned a key role as a privileged site of mass consumption as the production and micro-management of space in Britain became integral to the development of a planned national economy underpinned by Fordist principles. The apparently placeless and scale-less diagrams executed by Gordon Cullen to illustrate Parker Morris emblematize these relationships. Walls dissolve as space flows from inside to outside in a homogenized and ephemeral landscape whose limits are perhaps only the boundaries of the nation state and the circuits of capital.

Defining the role of common variation in the genomic and biological architecture of adult human height

Using genome-wide data from 253,288 individuals, we identified 697 variants at genome-wide significance that together explained one-fifth of the heritability for adult height. By testing different numbers of variants in independent studies, we show that the most strongly associated 1/42,000, 1/43,700 and 1/49,500 SNPs explained 1/421%, 1/424% and 1/429% of phenotypic variance. Furthermore, all common variants together captured 60% of heritability. The 697 variants clustered in 423 loci were enriched for genes, pathways and tissue types known to be involved in growth and together implicated genes and pathways not highlighted in earlier efforts, such as signaling by fibroblast growth factors, WNT/I 2-catenin and chondroitin sulfate-related genes. We identified several genes and pathways not previously connected with human skeletal growth, including mTOR, osteoglycin and binding of hyaluronic acid. Our results indicate a genetic architecture for human height that is characterized by a very large but finite number (thousands) of causal variants.

Book Review - An Architecture of Parts: Architects, Building Workers and Industrialisation in Britain 1940–1970 by Christine Wall and Architecture and the Welfare State, edited by Mark Swenarton, Tom Avermaete and Dirk van den Heuvel.

Session organiser/chair: Architecture, Infrastructure and the Making of Modern Ireland

‘A free Ireland would drain the bogs, would harness the rivers, would plant the wastes, would nationalise the railways and the waterways, would improve agriculture, would protect fisheries, would foster industries, would promote commerce, and beautify the cities …’ (Padraig Pearse, ‘From a Hermitage’, 1913)

Somewhat unusually in his often romantic writings Padraig Pearse – poet, pedagogue and revolutionary – chose to describe the future of an independent Ireland in terms of infrastructure and technological processes. Terence Brown’s locating of this excerpt at the beginning his seminal work Ireland: A Social and Cultural History 1922-2002 highlights the simultaneous and interlinking construction of both a new physical and cultural landscape for an independent modern nation. Lacking any significant industrial complex, the construction of new infrastructures in Ireland was seen throughout the 20th century as a key element in the building of the new State, just as the adoption of an international style modernism in architecture was perceived as a way to escape the colonial past. For Paul N. Edwards modernity and infrastructure are intimately connected.

‘infrastructures simultaneously shape and are shaped – in other words, co-construct – the condition of modernity. By linking macro, meso, and micro scales of time, space and social organisation, they form the stable foundation of modern social worlds’ (2003: 186).
Simultaneously omnipresent and invisible – infra means beneath – Edwards also points out that infrastructure tends only to become apparent when it is either new or broken. Interpreting the meso scale as being that of the building, this session calls for papers that critically and analytically investigate aspects of the architectures of infrastructure in 20th-century Ireland. Like the territory they explore these papers may range across scales to oscillate between a concern for the artefact and its physical landscape, and the larger, often hidden systems and networks that co-define this architecture.

Folly: Art after Architecture

FOLLY brings together Irish and international contemporary artists whose work has been inspired by iconic buildings of architectural modernism. From Eileen Gray’s seminal E1027 to Mies Van der Rohe’s restored Farnsworth House, Paul Rudolph’s demolished residences to Walter Gropius’s imagined Chicago Tribune Tower, the buildings referenced in FOLLY have had a mixed collection of fates.

Their presence in this exhibition affords them another afterlife. The qualities that make the architecture significant are played-with, exposed, re-canonised, made ambiguous, and eulogised. By creating fictional moments, questioning conventional documentation or excavating troubled histories of production, each artist invites you to think about how we experience and understand architecture today.

Incorporating PGMs into a BDI Architecture

In this paper, we present a hybrid BDI-PGM framework, in which PGMs (Probabilistic Graphical Models) are incorporated into a BDI (belief-desire-intention) architecture. This work is motivated by the need to address the scalability and noisy sensing issues in SCADA (Supervisory Control And Data Acquisition) systems. Our approach uses the incorporated PGMs to model the uncertainty reasoning and decision making processes of agents situated in a stochastic environment. In particular, we use Bayesian networks to reason about an agent’s beliefs about the environment based on its sensory observations, and select optimal plans according to the utilities of actions defined in influence diagrams. This approach takes the advantage of the scalability of the BDI architecture and the uncertainty reasoning capability of PGMs. We present a prototype of the proposed approach using a transit scenario to validate its effectiveness.

An Architecture of a Multi-Agent System for SCADA - Dealing With Uncertainty, Plans and Actions

This paper presents a multi-agent system approach to address the difficulties encountered in traditional SCADA systems deployed in critical environments such as electrical power generation, transmission and distribution. The approach models uncertainty and combines multiple sources of uncertain information to deliver robust plan selection. We examine the approach in the context of a simplified power supply/demand scenario using a residential grid connected solar system and consider the challenges of modelling and reasoning with
uncertain sensor information in this environment. We discuss examples of plans and actions required for sensing, establish and discuss the effect of uncertainty on such systems and investigate different uncertainty theories and how they can fuse uncertain information from multiple sources for effective decision making in
such a complex system.