Micro-scale abrasion behaviour of electroless Ni-P-SiC coating on aluminium alloy

Electroless nickel (EN) and electroless nickel composite (ENC) coatings were deposited on aluminium alloy substrate, LM24. The micro abrasion test was conducted to study the wear behaviour of the coatings with the effect of SiC concentration. Microhardness of the coatings was tested also. The wear scars were analysed using optical microscope and scanning electron microscope (SEM). The wear resistance was found to be improved in composite coating that has higher microhardness as compared to particles free and the bare aluminium substrate. In as-deposited condition for the composite coating, the wear volume increases on increase in SiC percentage in the coating but is found to be minimum for lower SiC percentage. The increase in hardness on heat treatment at 400°C is due to the hardening or grain coarsening with the formation Ni3P.

Quality of reporting of dental survival analyses

To explore the quality of reporting (writing and graphics) of articles that used time-to-event analyses to report dental treatment outcomes. A systematic search of the top 50 dental journals in 2008 produced the sample of articles for this analysis. Articles reporting treatment outcomes with (n = 95) and without (n = 91) time-to-event statistics were reviewed. Survival descriptive words used in the two groups were analysed (Pearson's chi-square). The quality of life tables, survival curves and time-to-event statistics were assessed (Kappa analysed agreement) and explored. Words describing dental outcomes 'over time' were more common in time-to-event compared with control articles (77%, 3%, P < 0.001). Non-specific use of 'rate' was common across both groups. Life tables and survival curves were used by 39% and 48% of the time-to-event articles, with at least one used by 82%. Construction quality was poor: 21% of life tables and 28% of survival curves achieved an acceptable standard. Time-to-event statistical reporting was poor: 3% achieved a high and 59% achieved an acceptable standard. The survival statistic, summary figure and standard error were reported in 76%, 95% and 20% of time-to-event articles. Individual statistical terms and graphic aids were common within and unique to time-to-event articles. Unfortunately, important details were regularly omitted from statistical descriptions and survival figures making the overall quality poor. It is likely this will mean such articles will be incorrectly indexed in databases, missed by searchers and unable to be understood completely if identified.

Accuracy of medical subject heading indexing of dental survival analyses

PURPOSE: To assess the Medical Subject Headings (MeSH) indexing of articles that employed time-to-event analyses to report outcomes of dental treatment in patients.

MATERIALS AND METHODS: Articles published in 2008 in 50 dental journals with the highest impact factors were hand searched to identify articles reporting dental treatment outcomes over time in human subjects with time-to-event statistics (included, n = 95), without time-to-event statistics (active controls, n = 91), and all other articles (passive controls, n = 6,769). The search was systematic (kappa 0.92 for screening, 0.86 for eligibility). Outcome-, statistic- and time-related MeSH were identified, and differences in allocation between groups were analyzed with chi-square and Fischer exact statistics.

RESULTS: The most frequently allocated MeSH for included and active control articles were "dental restoration failure" (77% and 52%, respectively) and "treatment outcome" (54% and 48%, respectively). Outcome MeSH was similar between these groups (86% and 77%, respectively) and significantly greater than passive controls (10%, P < .001). Significantly more statistical MeSH were allocated to the included articles than to the active or passive controls (67%, 15%, and 1%, respectively, P < .001). Sixty-nine included articles specifically used Kaplan-Meier or life table analyses, but only 42% (n = 29) were indexed as such. Significantly more time-related MeSH were allocated to the included than the active controls (92% and 79%, respectively, P = .02), or to the passive controls (22%, P < .001).

CONCLUSIONS: MeSH allocation within MEDLINE to time-to-event dental articles was inaccurate and inconsistent. Statistical MeSH were omitted from 30% of the included articles and incorrectly allocated to 15% of active controls. Such errors adversely impact search accuracy.

Will your article be found? Authors choose a confusing variety of words to describe dental survival analyses

OBJECTIVES: Identify the words and phrases that authors used to describe time-to-event outcomes of dental treatments in patients.

MATERIALS AND METHODS: A systematic handsearch of 50 dental journals with the highest Citation Index for 2008 identified articles reporting dental treatment with time-to-event statistics (included "case" articles, n = 95), without time-to-event statistics (active "control" articles, n = 91), and all other articles (passive "control" articles n = 6796). The included and active controls were read, identifying 43 English words across the title, aim and abstract, indicating that outcomes were studied over time. Once identified, these words were sought within the 6796 passive controls. Words were divided into six groups. Differences in use of words were analyzed with Pearson's chi-square across these six groups, and the three locations (title, aim, and abstract).

RESULTS: In the abstracts, included articles used group 1 (statistical technique) and group 2 (statistical terms) more frequently than the active and passive controls (group 1: 35%, 2%, 0.37%, P < 0.001 and group 2: 31%, 1%, 0.06%, P < 0.001). The included and active controls used group 3 (quasi-statistical) equally, but significantly more often than the passive controls (82%, 78%, 3.21%, P < 0.001). In the aims, use of target words was similar for included and active controls, but less frequent for groups 1-4 in the passive controls (P < 0.001). In the title, group 2 (statistical techniques) and groups 3-5 (outcomes) were similar for included and active controls, but groups 2 and 3 were less frequent in the passive controls (P < 0.001). Significantly more included articles used group 6 words (stating the study duration) (54%, 30%, P = 0.001).

CONCLUSION: All included articles used time-to-event analyses, but two-thirds did not include words to highlight this in the abstract. There is great variation in the words authors used to describe dental time-to-event outcomes. Electronic identification of such articles would be inconsistent, with low sensitivity and specificity. Authors should improve the reporting quality. Journals should allow sufficient space in abstracts to summarize research, and not impose unrealistic word limits. Readers should be mindful of these problems when searching for relevant articles. Additional research is required in this field.

Shape Memory Alloy Features for Seismic Retrofitting of External RC Beam-Column Joint

Shape memory alloys (SMAs) have the ability to undergo large deformations with minimum residual strain and also the extraordinary ability to undergo reversible hysteretic shape change known as the shape memory effect. The shape memory effect of these alloys can be utilised to develop a convenient way of actively confining concrete sections to improve their shear strength, flexural ductility and ultimate strain capacity. Most of the previous work on active confinement of concrete using SMA has been carried out on circular sections. In this study retrofitting strategies for active confinement of non-circular sections have been proposed. The proposed schemes presented in this paper are conceived with an aim to seismically retrofit a beam-column joint in non-seismically designed reinforced concrete buildings.

The complex material behaviour of SMAs depends on number of parameters. Depending upon the alloying elements, SMAs exhibit different behaviour in different conditions and are highly sensitive to variation in temperature, phase in which it is used, loading pattern, strain rate and pre-strain conditions. Therefore, a detailed discussion on the behaviour of SMAs under different thermo-mechanical conditions is presented first in this paper.

Hole-making Process and Its impacts on the Fatigue Response of Ti -6Al-4V Aircraft Alloy

In this work, the impact of conventional drilling and helical milling processes on the fatigue response Ti-6Al-4V (grade 5 titanium alloy) has been presented. Results show that the work pieces produced by helical milling has a 119% longer fatigue life compared with the drilled pieces under dry machining condition, and a 96% longer fatigue life for helical milled piece under lubricated condition. The use of cutting fluid has led to longer fatigue lives – 15% longer for drilling and 3% longer for helical milling. Other results such as the machined surface roughness, alloy surface and sub-surface microstructures have also been studied in details.

Pre-Radiotherapy Dental Assessment of Head and Neck Oncology Patients: An Audit.

Objectives: Approximately 300 people are diagnosed with Head and Neck cancer annually in Northern Ireland. The management may include treatment by surgery or by chemotherapy and radiotherapy,
or a combination of modalities. Patients whose oral cavity, teeth, salivary glands and jaws that
will be affected by treatment, particularly radiotherapy should have a pre-treatment assessment. This should be done as early as possible to maximise the time available for dental management. However, this can be challenging owing to the complexities of cancer diagnosis, treatment planning and multidisciplinary management. At the Belfast Dental Hospital, a number of patients were referred post- radiotherapy with complications after not having received a pre-treatment assessment. The referrals for pre- treatment dental assessment were also late in patients’ multidisciplinary journey, limiting the time period
for dental input. The purpose of this audit was to examine the time period between dental assessment and commencement of radiotherapy and whether this was an adequate time frame for dental management. This audit will also examine the dental diseases present and the treatments required pre-radiotherapy. Methods: Data for this audit was collected over 4 months in 2012
by analysing the dental charts and referrals of new patients who were referred to and attended the dental head and neck oncology clinic. A standardised referral pro-forma was introduced from September 2013 to improve the referral process.
A re-audit was conducted over 4 months in 2014. Data was collected similarly as previous. The time period between dental assessment and commencement of radiotherapy was examined. The presence of dental disease and subsequent treatments required were also noted.
Results: 63 new patients were examined in the dental head and neck oncology clinic over 4 months in 2012. 48 (76.2%) were examined pre-radiotherapy. The average length of time between dental assessment and radiotherapy commencement was 11 days. A new standardised referral pro-forma was introduced in 2013. In the re-audit, 65 new patients were seen over 4 months in 2014.
60 (92.3%) patients were examined pre-radiotherapy. The average length of time between dental assessment and radiotherapy commencement was 18 days.
Conclusion: Given the high prevalence of pre-existing dental disease amongst head and neck cancer patients, prompt dental assessment and treatment is vital. Efforts aimed at improving the care pathway are on-going through the implementation of a mandatory referral pro-forma and a dedicated assessment clinic.

Comparison of Composite Placement Techniques by Recently Qualified Dental Practitioners.

Objectives: To evaluate the placement of composite materials by new graduates using three alternative placement techniques.Methods: A cohort of 34 recently qualified graduates were asked to restore class II interproximal cavities in plastic teeth using three different techniques.

(i) A conventional incremental filling technique (Herculite XRV) using increments no larger than 2-mm with an initial layer on the cervical floor of the box of 1-mm.
(ii) Flowable bulk fill technique (Dentsply SDR) bulk fill placement in a 3-mm layer followed by an incremental fill of a microhybrid resin
(iii) Bulk fill (Kerr Sonicfill) which involved restorations placed in a 5-mm layer.

The operators were instructed in each technique, didactically and with a hands-on demonstration, prior to restoration placement.
All restorations were cured according to manufacturer’s recommendations. Each participant restored 3 teeth, 1 tooth per treatment technique.
The restorations were evaluated using modified USPHS criteria to assess both the marginal adaptation and the surface texture of the restorations. Blind evaluations were carried out independently by two examiners with the aid of magnification (loupes X2.5). Examiners were standardized prior to evaluation.
Results: Gaps between the tooth margins and the restoration or between the layers of the restoration were found in 13 of Group (i), 3 of Group (ii), and 4 of Group (iii)
Statistical analysis revealed a significant difference between the incrementally filled group (i) and the flowable bulk-fill group (ii) (p=0.0043) and between the incrementally filled (i) and the bulk fill groups (iii) (p=0.012) and no statistical difference (p=0.69) between the bulk filled groups Conclusions: Bulk fill techniques may result in a more satisfactory seal of the cavity margins when restoring with composite.

Identification of novel Factor XI mutations in a patient requiring dental extractions

Factor XI is a serine protease that participates in the intrinsic pathway of blood coagulation. Patients deficient in factor XI exhibit varying degrees of post operative bleeding following invasive surgical procedures such as dental extractions. Objectives: The aim of the study was to identify the specific mutations in a patient from a family with known factor XI deficiency. Methods: Samples were obtained from the patient, his mother and his father and subjected to DNA sequencing. Each protein coding exon 2-15 of the factor XI gene was amplified by polymerase chain reaction (PCR) followed by bidirectional sequencing utilizing di-deoxy chain termination chemistry. Results: The patient had a factor XI level of 20% of normal. Initial sequencing of factor XI from the patient identified a point mutation (646G>A) and a putative splice site mutation (1567+4A>T) in intron 13. These are novel previously unreported mutations. DNA sequence analysis of the mother revealed the 1567+4A>T mutation and the father exhibited the 646G>A mutation. As a consequence the treatment proceeded without serious bleeding complication and required administration only of transexamic acid though factor XI was available as haemostatic cover. Conclusion: The two mutations identified in this family are novel; further laboratory investigation of the functional consequences of those mutations is currently underway. Although factor XI deficiency is rare in the Northern Irish population this study highlights the techniques available to sequence and analyse this and similar haematological disorders.

3D FEM simulation of helical milling hole process for titanium alloy Ti-6Al-4V

As an emerging hole-machining methodology, helical milling process has become increasingly popular in aeromaterials manufacturing research, especially in areas of aircraft structural parts, dies, and molds manufacturing. Helical milling process is highly demanding due to its complex tool geometry and the progressive material failure on the workpiece. This paper outlines the development of a 3D finite element model for helical milling hole of titanium alloy Ti-6Al-4V using commercial FE code ABAQUS/Explicit. The proposed model simulates the helical milling hole process by taking into account the damage initiation and evolution in the workpiece material. A contact model at the interface between end-mill bit and workpiece has been established and the process parameters specified. Furthermore, a simulation procedure is proposed to simulate different cutting processes with the same failure parameters. With this finite element model, a series of FEAs for machined titanium alloy have been carried out and results compared with laboratory experimental data. The effects of machining parameters on helical milling have been elucidated, and the capability and advantage of FE simulation on helical milling process have been well presented.

Impact of Referral Protocols on the Dental Management of Patients Undergoing Treatment for Head and Neck Oncology in Northern Ireland

Objective: To evaluate the handling, by a group of practice-based researchers, of a recently introduced bulk fill resin-based composite restorative material, Filtek Bulk Fill Restorative (3M ESPE).

Methods: The twelve selected evaluators were sent explanatory letters, a pack of the material under investigation to use for 8 weeks, and a questionnaire.

Results: The evaluators rated the ease of use of the bulk fill restorative the same as the previously used posterior composite material. The provision of one shade only for evaluation may have compromised the score for aesthetic quality. No post-operative sensitivity was reported.

Conclusions: The bulk fill material was well received as indicated by the high number of evaluators who would both purchase the material and recommend it to colleagues.

Clinical relevance: A recently introduced bulk fill restorative material achieved a rating for handling which was similar to the evaluators’ previously used resin composite, although there were some concerns regarding the translucency of the material.

Enhancement of Wear and Corrosion Resistance of Beta Titanium Alloy by Laser Gas Alloying with Nitrogen

The relatively high elastic modulus coupled with the presence of toxic vanadium (V) in Ti6Al4 V alloy has long been a concern in orthopaedic applications. To solve the problem, a variety of non-toxic and low modulus beta-titanium (beta-Ti) alloys have been developed. Among the beta-Ti alloy family, the quaternary Ti-Nb-Zr-Ta (TNZT) alloys have received the highest attention as a promising replacement for Ti6Al4 V due to their lower elastic modulus and outstanding long term stability against corrosion in biological environments. However, the inferior wear resistance of TNZT is still a problem that must be resolved before commercialising in the orthopaedic market. In this work, a newly-developed laser surface treatment technique was employed to improve the surface properties of Ti-35.3Nb-7.3Zr-5.7Ta alloy. The surface structure and composition of the laser-treated TNZT surface were examined by grazing incidence x-ray diffraction (GI-XRD) and x-ray photoelectron spectroscopy (XPS). The wear and corrosion resistance were evaluated by pin-on-plate sliding test and anodic polarisation test in Hanks’ solution. The experimental results were compared with the untreated (or base) TNZT material. The research findings showed that the laser surface treatment technique reported in this work can effectively improve the wear and corrosion resistance of TNZT.

NPY Y1 and VPAC1 receptor expression in human dental pulps

Neuropeptides such as neuropeptide Y (NPY) and vasoactive intestinal polypeptide (VIP) have been shown by our research group to be present in human dental pulp tissue. Neuropeptides cannot cross cell membranes and therefore to exert their biological effects they must bind to selected receptors on the surface of target cell membranes. However, the expression of receptor proteins for NPY and/or VIP have yet to be reported in human pulp tissue. The presence of neuropeptide receptors can be conveniently determined by Western blotting using specific anti-receptor antibodies. Objectives: The aim of this work was to identify the presence of the NPY Y1 receptor and the VIP receptor VPAC1 in human dental pulp tissue from both intact and carious teeth using Western blotting. Methods: Pulp tissue was collected from both intact and carious teeth and membrane preparations from these tissues were then subject to sodium dodecyl sulphate gel electrophoresis (SDS-PAGE), transferred to nitrocellulose and probed with specific antibodies to either the NPY Y1 receptor or the VPAC1 receptor. Results: Individual Western blotting experiments revealed the presence of immunoreactive bands corresponding to the known molecular weights of the NPY Y1 and VPAC1 receptor proteins in both intact and carious pulp samples. Conclusions: Demonstration of the presence of NPY Y1 and VPAC1 receptor protein expression in pulpal tissue from intact and carious teeth provides further support for the roles of these neuropeptides in pulpal health and disease.

TRP Channels and calcium signalling in dental pulp stem cells

Introduction: Ca2+ ion is an important intracellular messenger essential for the regulation of various cellular functions including proliferation, differentiation and apoptosis. Transient Receptor Potential (TRP) channels are calcium permeable cationic channels that play important role in regulation of free intracellular calcium ([Ca2+]i) in response to thermal, physical and chemical stimuli. Ca2+ signalling in human dental pulp stem cells (hDPSCs) and the ion channels regulating Ca2+ are largely not known. Objectives: Investigate changes in [Ca2+]i and determine the ion channels that regulate calcium signalling in hDPSCs. Methods: DPSCs were derived from immature third molars and cells less than passage 6 were used in all the experiments. Changes in [Ca2+]i were studied with Fura2 calcium imaging. RNA was extracted from DPSCs and a panel of TRP channel gene expression was determined by qPCR employing custom designed FAM TRP specific primers and probes (Roche, UK) and the Light Cycler 480 Probes Master (Roche). Results: hDPSCs express gene transcripts for all TRP families including TRPV1, V2, V4, TRPA1, TRPC3, TRPC5, TRPC6, TRPM3, TRPM7 and TRPP2. Stimulation of cells with appropriate TRP channel agonist induced increase in [Ca2+]i and similar responses were obtained when cell were mechanically stimulated by membrane stretch with application of hypotonic solution. Conclusion: TRP channels mediate calcium signalling in hDPSCs that merit further investigation.

Osteoprotegerin Expression in the Dental Pulp

Objectives: The inflammatory response to pulpal injury or infection has major clinical significance. Osteoprotegerin (OPG) is a soluble decoy receptor for Receptor Activator of NF kappa B Ligand (RANKL), preventing ligand binding to its receptor (RANK), thus inhibiting clastic cell formation. The aim of the study is to investigate the expression of OPG in human dental pulp and the effects of inflammatory mediators. This study will specifically investigate the effects of Transforming Growth Factor Beta-1 (TGF-β1) and Interleukin 1-Beta (IL-1β) on the expression of OPG on pulp fibroblasts in vitro. Method: Five primary pulp fibroblast populations were obtained by explant culture of healthy pulp tissue. Triplicate cultures were grown to confluence in 12-well plates and stimulated for 48 hours with IL-1β (10ng/ml) or TGF-β1 (10ng/ml). The conditioned media was collected and OPG levels detected by ELISA (R+D Systems, UK). Results: All fibroblast populations produced quantifiable levels of OPG in a time-dependant fashion. IL-1β significantly increased the expression of OPG (p<0.05) in all cultures. In contrast, TGF-β1 had no significant effect on OPG expression levels. In addition, previous work in our laboratory demonstrated both TGF-β1 and IL-1β stimulated OPG expression by periodontal ligament fibroblasts. Conclusion: These data indicate that IL-1β-regulated expression of OPG by pulpal fibroblasts may mediate hard tissue turnover in the inflamed dental pulp.