Clinical and therapeutic relevance of PIM1 kinase in gastric cancer

Gastric cancer is a leading cause of cancer-related mortality, and chemotherapeutic options are currently limited. PIM1 kinase, an oncogene that promotes tumorigenesis in several cancer types, might represent a novel therapeutic target in gastric cancer.

Effect of postweld heat treatment on the microstructure and cyclic deformation behavior of laser-welded NiTi-shape memory wires

NiTi wires of 0.5 mm diameter were laser welded using a CW 100-W fiber laser in an argon shielding environment with or without postweld heat-treatment (PWHT). The microstructure and the phases present were studied by scanning-electron microscopy (SEM), transmission-electron microscopy (TEM), and X-ray diffractometry (XRD). The phase transformation behavior and the cyclic stress–strain behavior of the NiTi weldments were studied using differential scanning calorimetry (DSC) and cyclic tensile testing. TEM and XRD analyses reveal the presence of Ni4Ti3 particles after PWHT at or above 623 K (350 °C). In the cyclic tensile test, PWHT at 623 K (350 °C) improves the cyclic deformation behavior of the weldment by reducing the accumulated residual strain, whereas PWHT at 723 K (450 °C) provides no benefit to the cyclic deformation behavior. Welding also reduces the tensile strength and fracture elongation of NiTi wires, but the deterioration could be alleviated by PWHT.

Effects of process parameters upon the shape memory and pseudo-elastic behaviors of laser-welded NiTi thin foil

This article discusses the effects of laser welding parameters such as power, welding speed, and focus position on the weld bead profile, microstructure, pseudo-elasticity (PE), and shape memory effect (SME) of NiTi foil with thickness of 250 um using 100W CW fiber laser. The parameter settings to produce the NiTi welds for analysis in this article were chosen from a fractional factorial design to ensure the welds produced were free of any apparent defect. The welds obtained were mainly of cellular dendrites with grain sizes ranging from 2.5 to 4.8 um at the weld centerline. A small amount of Ni3Ti was found in the welds. The onset of transformation temperatures (As and Ms) of the NiTi welds shifted to the negative side as compared to the as-received NiTi alloy. Ultimate tensile stress of the NiTi welds was comparable to the as received NiTi alloy, but a little reduction in the pseudo-elastic property was noted. Full penetration welds with desirable weld bead profiles and mechanical properties were successfully obtained in this study.

Finite Element Analysis of Drilling of Carbon Fibre Reinforced Composites

Despite the increased applications of the composite materials in aerospace due to their exceptional physical and mechanical properties, the machining of composites remains a challenge. Fibre reinforced laminated composites are prone to different damages during machining process such as delamination, fibre pull-out, microcracks, thermal damages. Optimization of the drilling process parameters can reduces the probability of these damages. In the current research, a 3D finite element (FE) model is developed of the process of drilling in the carbon fibre reinforced composite (CFC). The FE model is used to investigate the effects of cutting speed and feed rate on thrust force, torque and delamination in the drilling of carbon fiber reinforced laminated composite. A mesoscale FE model taking into account of the different oriented plies and interfaces has been proposed to predict different damage modes in the plies and delamination. For validation purposes, experimental drilling tests have been performed and compared to the results of the finite element analysis. Using Matlab a digital image analysis code has been developed to assess the delamination factor produced in CFC as a result of drilling. © Springer Science+Business Media B.V. 2011.

Still Fighting the "War for Talent''? Bridging the Science Versus Practice Gap

The purpose of this article is to identify some the most critical outstanding issues faced by practitioners in undertaking effective talent management. In spite of the global financial crisis, talent management will continue being one of the most important challenges faced by organizations in the coming decade. Workforce demographics and skills shortages are likely to make the "war for talent'' fiercer than ever before making effective talent management a competitive necessity. While talent management is rapidly developing as a research field, there are many areas and questions that need to be explored. These questions are likely to have a particularly important applied benefit as they represent some of the key challenges organizations are grappling with in effectively managing their talent. The article asks researchers in the field to consider the questions proposed in developing future research agendas.

Mucociliary clearance in cystic fibrosis: Physiology and pharmacological treatments

The understanding of how mutations of the cystic fibrosis gene results in recurrent infection and the development of bronchiectasis is now well established. This review examines aspects of lung pathophysiology specifically, abnormal mucociliary clearance, inflammation and infection which are the basis of the daily symptoms encountered by people with cystic fibrosis. Other components of the lung epithelium and their potential contribution to cystic fibrosis disease are discussed. Therapeutic interventions which aim to target abnormal mucociliary clearance are summarized. © 2011 Elsevier Ltd.

Disordered vascular compliance in haemochromatosis

Background: A relationship may exist between body iron stores, endothelial dysfunction and overall cardiovascular risk.

Aims: To compare vascular compliance, biochemical endothelial function and antioxidant status between patients with homozygous hereditary haemochromatosis and healthy controls.

Methods: Haemochromatosis patients and healthy controls were recruited. Measures of vascular compliance were assessed by applanation tonometry. Serological markers of endothelial function (plasma lipid hydroperoxides, cell adhesion molecules), antioxidant levels (ascorbate, lipid soluble antioxidants) and high-sensitivity C-reactive protein (CRP) were also measured.

Results: Thirty-five hereditary haemochromatosis patients (ten females, mean age 54.6) and 36 controls (27 female, mean age 54.0) were recruited. Haemochromatosis patients had significantly higher systolic and diastolic blood pressures. Pulse wave velocity (PWV) was significantly higher in male haemochromatosis patients (9.90 vs. 8.65 m/s, p = 0.048). Following adjustment for age and blood pressure, male haemochromatosis patients continued to have a trend for higher PWVs (+1.37 m/s, p = 0.058). Haemochromatosis patients had significantly lower levels of ascorbate (46.11 vs. 72.68 lmol/L, p = 0.011), retinol (1.17 vs. 1.81 lmol/L, p = 0.001) and g-tocopherol (2.51 vs. 3.14 lmol/L, p = 0.011). However, there was no difference in lipid hydroperoxides (0.46 vs. 0.47 nmol/L, p = 0.94), cell adhesion molecule levels (ICAM: 348.12 vs. 308.03 ng/mL, p = 0.32 and VCAM: 472.78 vs. 461.31 ng/mL, p = 0.79) or high-sensitivity CRP (225.01 vs. 207.13 mg/L, p = 0.32).

Conclusions: Haemochromatosis is associated with higher PWVs in males and diminished antioxidants across the sexes but no evidence of endothelial dysfunction or increased lipid peroxidation.

Exploring consumer's preferences for farmed sea bream

Sea bream (Sparus aurata) production plays a significant part in Italian aquaculture, contributing to almost 18% of national pisciculture sales revenue. In recent years, Italian firms faced higher competition from countries with lower production costs. This prompted responses toward both cost reduction and product differentiation. The objective of this study was to investigate the preferences of Italian consumers for sea bream from fish farms, with a focus on aspects of product differentiation as gleaned from the analysis of the market situation: price, product origin, type and place of fish farming, and, in particular, type of feed. Data were collected with a consumers’ survey using personal interviews conducted on a questionnaire that included a choice experiment. Consumer preferences were analyzed with choice models based on stated preference data. The models made it possible to evaluate the potential of products with different combinations of attributes for which there is currently no market information available. In particular, the country of origin emerged as an important element of consumer choice, and to a lesser degree, organic certification and fish farming in marine cages also play a relevant role and may command a price premium.

Vitamin D receptor gene variants and esophageal adenocarcinoma risk:A population-based case-control study

Purpose: Polymorphisms in the vitamin D receptor (VDR) gene may be of etiological importance in determining cancer risk. The aim of this study was to assess the association between common VDR gene polymorphisms and esophageal adenocarcinoma (EAC) risk in an all-Ireland population-based case-control study. Methods: EAC cases and frequency-matched controls by age and gender recruited between March 2002 and December 2004 throughout Ireland were included. Participants were interviewed, and a blood sample collected for DNA extraction. Twenty-seven single nucleotide polymorphisms in the VDR gene were genotyped using Sequenom or TaqMan assays while the poly(A) microsatellite was genotyped by fluorescent fragment analysis. Unconditional logistic regression was applied to assess the association between VDR polymorphisms and EAC risk. Results: A total of 224 cases of EAC and 256 controls were involved in analyses. After adjustment for potential confounders, TT homozygotes at rs2238139 and rs2107301 had significantly reduced risks of EAC compared with CC homozygotes. In contrast, SS alleles of the poly(A) microsatellite had significantly elevated risks of EAC compared with SL/LL alleles. However, following permutation analyses to adjust for multiple comparisons, no significant associations were observed between any VDR gene polymorphism and EAC risk. Conclusions: VDR gene polymorphisms were not significantly associated with EAC development in this Irish population. Confirmation is required from larger studies. © Springer Science+Business Media, LLC 2011.

Comparison of progenitor mass estimates for the type IIP SN 2012A

We present the one-year long observing campaign of SN 2012A which exploded in the nearby (9.8 Mpc) irregular galaxy NGC 3239. The photometric evolution is that of a normal type IIP supernova. The absolute maximum magnitude, with MB = -16.23 +- 0.16 mag. SN2012A reached a peak luminosity of about 2X10**42 erg/s, which is brighter than those of other SNe with a similar 56Ni mass. The latter was estimated from the luminosity in the exponential tail of the light curve and found to be M(56Ni) = 0.011 +-0.004 Msun. The spectral evolution of SN 2012A is also typical of SN IIP, from the early spectra dominated by a blue continuum and very broad (~10**4 km/s) Balmer lines, to the late-photospheric spectra characterized by prominent P-Cygni features of metal lines (Fe II, Sc II, Ba II, Ti II, Ca II, Na ID). The photospheric velocity is moderately low, ~3X10**3 km/s at 50 days, for the low optical depth metal lines. The nebular spectrum obtained 394 days after the shock breakout shows the typical features of SNe IIP and the strength of the [O I] doublet suggests a progenitor of intermediate mass, similar to SN 2004et (~15 Msun). A candidate progenitor for SN 2012A has been identified in deep, pre-explosion K'-band Gemini North (NIRI) images, and found to be consistent with a star with a bolometric magnitude -7.08+-0.36 (log L/Lsun = 4.73 +- 0.14$ dex). The magnitude of the recovered progenitor in archival images points toward a moderate-mass 10.5 (-2/+4.5) Msun star as the precursor of SN 2012A. The explosion parameters and progenitor mass were also estimated by means of a hydrodynamical model, fitting the bolometric light curve, the velocity and the temperature evolution. We found a best fit for a kinetic energy of 0.48 foe, an initial radius of 1.8X10**13 cm and ejecta mass of 12.5 Msun.

Multi-epoch high-resolution spectroscopy of SN2011fe - Linking the progenitor to its environment

This study attempts to establish a link between the reasonably well known nature of the progenitor of SN2011fe and its surrounding environment. This is done with the aim of enabling the identification of similar systems in the vast majority of the cases, when distance and epoch of discovery do not allow a direct approach. To study the circumstellar environment of SN2011fe we have obtained high-resolution spectroscopy of SN2011fe on 12 epochs, from 8 to 86 days after the estimated date of explosion, targeting in particular at the time evolution of CaII and NaI. Three main absorption systems are identified from CaII and NaI, one associated to the Milky Way, one probably arising within a high-velocity cloud, and one most likely associated to the halo of M101. The Galactic and host galaxy reddening, deduced from the integrated equivalent widths (EW) of the NaI lines are E(B-V)=0.011+/-0.002 and E(B-V)=0.014+/-0.002 mag, respectively. The host galaxy absorption is dominated by a component detected at the same velocity measured from the 21-cm HI line at the projected SN position (~180 km/s). During the ~3 months covered by our observations, its EW changed by 15.6+/-6.5 mA. This small variation is shown to be compatible with the geometric effects produced by therapid SN photosphere expansion coupled to the patchy fractal structure of the ISM. The observed behavior is fully consistent with ISM properties similar to those derived for our own Galaxy, with evidences for structures on scales

Taxonomic and functional diversity of farmland bird communities across Europe:Effects of biogeography and agricultural intensification

In eight European study sites (in Spain, Ireland, Netherlands, Germany, Poland, Estonia and Sweden), abundance of breeding farmland bird territories was obtained from 500 × 500 m survey plots (30 per area, N = 240) using the mapping method. Two analyses were performed: (I) a Canonical Correspondence Analysis of species abundance in relation to geographical location and variables measuring agricultural intensification at field and farm level to identify significant intensification variables and to estimate the fractions of total variance in bird abundance explained by geography and agricultural intensification; (II) several taxonomic and functional community indices were built and analysed using GLM in relation to the intensification variables found significant in the CCA. The geographical location of study sites alone explains nearly one fifth (19. 5%) of total variation in species abundance. The fraction of variance explained by agricultural intensification alone is much smaller (4. 3%), although significant. The intersection explains nearly two fifths (37. 8%) of variance in species abundance. Community indices are negatively affected by correlates of intensification like farm size and yield, whereas correlates of habitat availability and quality have positive effects on taxonomic and functional diversity of assemblages. Most of the purely geographical variation in farmland bird assemblage composition is associated to Mediterranean steppe species, reflecting the bio-geographical singularity of that assemblage and reinforcing the need to preserve this community. Taxonomic and functional diversity of farmland bird communities are negatively affected by agricultural intensification and positively affected by increasing farmland habitat availability and quality. © 2011 Springer Science+Business Media B.V.

Laboratory tests to study the influence of rock stress confinement on the performances of TBM discs in tunnels

To clarify some aspects of rock destruction with a disc acting on a high confined tunnel face, a series of tests were carried out to examine fracture mechanisms under an indenter that simulates the tunnel boring machine (TBM) tool action, in the presence of an adjacent groove, when a state of stress (lateral confinement) is imposed on a rock sample. These tests proved the importance of carefully establishing the optimal distance of grooves produced by discs acting on a confined surface, and the value (as a mere order of magnitude) of the increase of the thrust to produce the initiation of chip formation, as long as the confinement pressure becomes greater. © University of Science and Technology Beijing and Springer-Verlag Berlin Heidelberg 2011.

Beowulf Hondbona: the Literary Context for Emending Line 1520b

In this article I consider the debate over whether line 1520b ought to be read as the emended “hond sweng” or the scribal “hord swenge.” It is a small point philologically but it raises interesting cultural and literary questions about the attitude of the Beowulf poet to arms and armour, to aggressive and defensive war gear, and to swords in particular. It has widely been assumed that swords are important in Beowulf and yet, the question of what their significance might be has received very little attention. Throughout the poem the hero is plagued by breaking, melting, and failing swords. He borrows, finds, and is given swords but unlike other English and Germanic heroes he is never identified with a single, great sword. I suggest that this is because, ultimately, Beowulf is conceived as a hondbana, a designation which has implications for what kind of a hero he proves to be.