Interpreting A-level Mathematics grades – as easy as A, B, C?

Many concerns have been expressed that students’ basic mathematical skills have deteriorated during the 1990s and there has been disquiet that current A-level grading does not distinguish adequately between the more able students. This study reports the author’s experiences of teaching maths to large classes of first-year engineering students and aims to enhance understanding of levels of mathematical competence in more recent years. Over the last four years, the classes have consisted of a very large proportion of highly qualified students – about 91% of them had at least grade B in A-level Mathematics. With a small group of students having followed a non-traditional route to university (no A-level maths) and another group having benefitted through taking A-level Further Mathematics at school, the classes have contained a very wide range of mathematical backgrounds. Despite the introductory maths course at university involving mainly repetition of A-level material, students’ marks were spread over a very wide range – for example, A-level Mathematics grade B students have scored across the range 16 – 97%. Analytical integration is the topic which produced the largest variation in performance across the class but, in contrast, the A-level students generally performed well in differentiation. Initial analysis suggests some stability in recent years in the mathematical proficiency of students with a particular A-level Mathematics grade. Allowing choice of applied maths modules as part of the A-level maths qualification increases the variety of students’ mathematical backgrounds and their selection from mechanics, statistics or decision maths is not clear from the final qualification.

Developing mathematics support for first-year engineering students with non-traditional mathematics backgrounds

A maths support system for first-year engineering students with non-traditional entry qualifications has involved students working through practice questions structured to correspond with the maths module which runs in parallel. The setting was informal and there was significant one-to-one assistance. The non-traditional students (who are known to be less well prepared mathematically) were explicitly contacted in the first week of their university studies regarding the maths support and they generally seemed keen to participate. However, attendance at support classes was relatively low, on average, but varied greatly between students. Students appreciated the personal help and having time to ask questions. It seemed that having a small group of friends within the class promoted attendance – perhaps the mutual support or comfort that they all had similar mathematical difficulties was a factor. The classes helped develop confidence. Attendance was hindered by the class being timetabled too soon after the relevant lecture and students were reluctant to come with no work done beforehand. Although students at risk due to their mathematical unpreparedness can easily be identified at an early stage of their university career, encouraging them to partake of the maths support is an ongoing, major problem.

Genome-wide meta-analysis identifies 11 new loci for anthropometric traits and provides insights into genetic architecture

Approaches exploiting trait distribution extremes may be used to identify loci associated with common traits, but it is unknown whether these loci are generalizable to the broader population. In a genome-wide search for loci associated with the upper versus the lower 5th percentiles of body mass index, height and waist-to-hip ratio, as well as clinical classes of obesity, including up to 263,407 individuals of European ancestry, we identified 4 new loci (IGFBP4, H6PD, RSRC1 and PPP2R2A) influencing height detected in the distribution tails and 7 new loci (HNF4G, RPTOR, GNAT2, MRPS33P4, ADCY9, HS6ST3 and ZZZ3) for clinical classes of obesity. Further, we find a large overlap in genetic structure and the distribution of variants between traits based on extremes and the general population and little etiological heterogeneity between obesity subgroups.

Human Resource Management in Multinational Enterprises: Evidence From a Late Industrializing Economy

This paper examines the extent to which human resource management (HRM) practices in multinational enterprises (MNEs) from a small, late developing and highly globalized economy resemble their counterparts from larger, early industrializing countries. The paper draws on data from a large-scale representative survey of 260 MNEs in Ireland. The results demonstrate that there are significant differences between the HRM practices deployed in Irish-owned MNEs and that of their US counterparts but considerable similarity with UK firms. A key conclusion is that arguments in the literature regarding MNEs moving towards the adoption of global best practices, equating to the pursuance of an American model of HRM, were not obvious. The study found considerable variation from ‘US practices’ amongst indigenous Irish MNEs.

The Pan-STARRS Moving Object Processing System

We describe the Pan-STARRS Moving Object Processing System (MOPS), a modern software package that produces automatic asteroid discoveries and identifications from catalogs of transient detections from next-generation astronomical survey telescopes. MOPS achieves >99.5% efficiency in producing orbits from a synthetic but realistic population of asteroids whose measurements were simulated for a Pan-STARRS4-class telescope. Additionally, using a nonphysical grid population, we demonstrate that MOPS can detect populations of currently unknown objects such as interstellar asteroids. MOPS has been adapted successfully to the prototype Pan-STARRS1 telescope despite differences in expected false detection rates, fill-factor loss, and relatively sparse observing cadence compared to a hypothetical Pan-STARRS4 telescope and survey. MOPS remains highly efficient at detecting objects but drops to 80% efficiency at producing orbits. This loss is primarily due to configurable MOPS processing limits that are not yet tuned for the Pan-STARRS1 mission. The core MOPS software package is the product of more than 15 person-years of software development and incorporates countless additional years of effort in third-party software to perform lower-level functions such as spatial searching or orbit determination. We describe the high-level design of MOPS and essential subcomponents, the suitability of MOPS for other survey programs, and suggest a road map for future MOPS development.

Human Parechovirus Infection in Neonatal Intensive Care

Background: Approximately 5-6% of all infective episodes in NICU are of viral origin. Previous studies suggest that human parechovirus (HPeV) infection presents most commonly in term infants, as a sepsis-like syndrome in which meningoencephalitis is prominent. Our aim was to study the infection rate and associated features of HPeV.

Methods: Blood samples were taken from NICU babies greater than 48 hours old, who were being investigated for late onset sepsis. Clinical and laboratory data were collected at the time of the suspected sepsis episode. Samples were tested using universal primers and probe directed at the 5'-untranslated region of the HPeV genome by reverse transcriptase PCR. Results were confirmed by electrophoresis and DNA sequencing.

Results: HPeV was detected in 11 of 84 samples (13%). These infants had a mean (interquartile range, IQR) gestational age of 28.9 (26.9 - 30.6) weeks and mean birth weight of 1.26 (SD = 0.72) kg. The median day of presentation was 16 (IQR: 11-27). These characteristics were similar to the infants without positive viral detection. Six infants presented with respiratory signs. One infant presented with signs of meningitis. Six of the 11 episodes of HPeV infection occurred during the winter months (December - February). No HPeV positive infants had abnormal findings on their 28-day cranial ultrasound examination.

Conclusions: We found a HPeV infection rate of 13% in infants being tested for late onset sepsis. HPeV should be considered as a possible cause of sepsis-like symptoms in preterm infants.

Microbial community of the deep-sea brine Lake Kryos seawater-brine interface is active below the chaotropicity limit of life as revealed by recovery of mRNA

Within the complex of deep, hypersaline anoxic lakes (DHALs) of the Mediterranean Ridge, we identified a new, unexplored DHAL and named it ‘Lake Kryos’ after a nearby depression. This lake is filled with magnesium chloride (MgCl2)-rich, athalassohaline brine (salinity > 470 practical salinity units), presumably formed by the dissolution of Messinian bischofite. Compared with the DHAL Discovery, it contains elevated concentrations of kosmotropic sodium and sulfate ions, which are capable of reducing the net chaotropicily of MgCl2-rich solutions. The brine of Lake Kryos may therefore be biologically permissive at MgCl2 concentrations previously considered incompatible with life. We characterized the microbiology of the seawater–Kryos brine interface and managed to recover mRNA from the 2.27–3.03 MMgCl2 layer (equivalent to 0.747–0.631 water activity), thereby expanding the established chaotropicity window-for-life. The primary bacterial taxa present there were Kebrit Deep Bacteria 1 candidate division and DHAL-specific group of organisms, distantly related toDesulfohalobium. Two euryarchaeal candidate divisions, Mediterranean Sea Brine Lakes group 1 and halophilic cluster 1, accounted for > 85% of the rRNA-containing archaeal clones derived from the 2.27–3.03 M MgCl2 layer, but were minority community-members in the overlying interface-layers. These findings shed light on the plausibility of life in highly chaotropic environments, geochemical windows for microbial extremophiles, and have implications for habitability elsewhere in the Solar System.

Multiplication of microbes below 0.690 water activity: implications for terrestrial and extraterrestrial life

Since a key requirement of known life forms is available water (water activity; aw), recent searches for signatures of past life in terrestrial and extraterrestrial environments have targeted places known to have contained significant quantities of biologically available water. However, early life on Earth inhabited high-salt environments, suggesting an ability to withstand low water-activity. The lower limit of water activity that enables cell division appears to be ∼ 0.605 which, until now, was only known to be exhibited by a single eukaryote, the sugar-tolerant, fungal xerophile Xeromyces bisporus. The first forms of life on Earth were, though, prokaryotic. Recent evidence now indicates that some halophilic Archaea and Bacteria have water-activity limits more or less equal to those of X. bisporus. We discuss water activity in relation to the limits of Earth's present-day biosphere; the possibility of microbial multiplication by utilizing water from thin, aqueous films or non-liquid sources; whether prokaryotes were the first organisms able to multiply close to the 0.605-aw limit; and whether extraterrestrial aqueous milieux of ≥ 0.605 aw can resemble fertile microbial habitats found on Earth.

Ecological Impacts of Alien Species: Quantification, Scope, Caveats, and Recommendations

Despite intensive research during the past decade on the effects of alien species, invasion science still lacks the capacity to accurately predict the impacts of those species and, therefore, to provide timely advice to managers on where limited resources should be allocated. This capacity has been limited partly by the context-dependent nature of ecological impacts, research highly skewed toward certain taxa and habitat types, and the lack of standardized methods for detecting and quantifying impacts. We review different strategies, including specific experimental and observational approaches, for detecting and quantifying the ecological impacts of alien species. These include a four-way experimental plot design for comparing impact studies of different organisms. Furthermore, we identify hypothesis-driven parameters that should be measured at invaded sites to maximize insights into the nature of the impact. We also present strategies for recognizing high-impact species. Our recommendations provide a foundation for developing systematic quantitative measurements to allow comparisons of impacts across alien species, sites, and time.

Evaluation of an in situ spatial resolution instrument for fixed beds through the assessment of the invasiveness of probes and a comparison with a micro-kinetic model

<p>This paper reports the detailed description and validation of a fully automated, computer controlled analytical method to spatially probe the gas composition and thermal characteristics in packed bed systems. This method has been designed to limit the invasiveness of the probe, a characteristic assessed using CFD. The thermocouple is aligned with the sampling holes to enable simultaneous recording of the gas composition and temperature profiles. This analysis technique has been validated by studying CO oxidation over a 1% Pt/Al2O3 catalyst. The resultant profiles have been compared with a micro-kinetic model, to further assess the strength of the technique. p>

Development and validation of Fluid Structure Interaction Methods for an Oscillating Wave Surge Converter

The term fatigue loads on the Oyster Oscillating Wave Surge Converter (OWSC) is used to describe hydrostatic loads due to water surface elevation with quasi-static changes of state. Therefore a procedure to implement hydrostatic pressure distributions into finite element analysis of the structure is desired. Currently available experimental methods enable one to measure time variant water surface elevation at discrete locations either on or around the body of the scale model during tank tests. This paper discusses the development of a finite element analysis procedure to implement time variant, spatially distributed hydrostatic pressure derived from discretely measured water surface elevation. The developed method can process differently resolved (temporal and spatial) input data and approximate the elevation over the flap faces with user defined properties. The structural loads, namely the forces and moments on the body can then be investigated by post processing the numerical results. This method offers the possibility to process surface elevation or hydrostatic pressure data from computational fluid dynamics simulations and can thus be seen as a first step to a fluid-structure interaction model.

Transatlantic distribution of the Alaskan White River Ash

Volcanic ash layers preserved within the geologic record represent precise time markers that correlate disparate depositional environments and enable the investigation of synchronous and/or asynchronous behaviors in Earth system and archaeological sciences. However, it is generally assumed that only exceptionally powerful events, such as supereruptions (≥450 km3 of ejecta as dense-rock equivalent; recurrence interval of ∼105 yr), distribute ash broadly enough to have an impact on human society, or allow us to address geologic, climatic, and cultural questions on an intercontinental scale. Here we use geochemical, age, and morphological evidence to show that the Alaskan White River Ash (eastern lobe; A.D. 833–850) correlates to the “AD860B” ash (A.D. 846–848) found in Greenland and northern Europe. These occurrences represent the distribution of an ash over 7000 km, linking marine, terrestrial, and ice-core records. Our results indicate that tephra from more moderate-size eruptions, with recurrence intervals of ∼100 yr, can have substantially greater distributions than previously thought, with direct implications for volcanic dispersal studies, correlation of widely distributed proxy records, and volcanic hazard assessment.

Diagnostic accuracy of pulmonary host inflammatory mediators in the exclusion of ventilator-acquired pneumonia

<p>Background: Excessive use of empirical antibiotics is common in critically ill patients. Rapid biomarker-based exclusion of infection may improve antibiotic stewardship in ventilator-acquired pneumonia (VAP). However, successful validation of the usefulness of potential markers in this setting is exceptionally rare.p><p>Objectives: We sought to validate the capacity for specific host inflammatory mediators to exclude pneumonia in patients with suspected VAP. p><p>Methods: A prospective, multicentre, validation study of patients with suspected VAP was conducted in 12 intensive care units. VAP was confirmed following bronchoscopy by culture of a potential pathogen in bronchoalveolar lavage fluid (BALF) at >10p>4p> colony forming units per millilitre (cfu/mL). Interleukin-1 beta (IL-1β), IL-8, matrix metalloproteinase-8 (MMP-8), MMP-9 and human neutrophil elastase (HNE) were quantified in BALF. Diagnostic utility was determined for biomarkers individually and in combination. p><p>Results: Paired BALF culture and biomarker results were available for 150 patients. 53 patients (35%) had VAP and 97 (65%) patients formed the non-VAP group. All biomarkers were significantly higher in the VAP group (p&lt;0.001). The area under the receiver operator characteristic curve for IL-1β was 0.81; IL-8, 0.74; MMP-8, 0.76; MMP-9, 0.79 and HNE, 0.78. A combination of IL-1β and IL-8, at the optimal cut-point, excluded VAP with a sensitivity of 100%, a specificity of 44.3% and a post-test probability of 0% (95% CI 0% to 9.2%). p><p>Conclusions: Low BALF IL-1β in combination with IL-8 confidently excludes VAP and could form a rapid biomarker-based rule-out test, with the potential to improve antibiotic stewardship.p>

Are family physician visits and continuity of care associated with acute care use at end-of-life? A population-based cohort study of homecare cancer patients

<p>Background: Previous end-of-life cancer research has shown an association between increased family physician continuity of care and reduced use of acute care services; however, it did not focus on a homecare population or control for homecare nursing. p><p>Aim: Among end-of-life homecare cancer patients, to investigate the association of family physician continuity with location of death and hospital and emergency department visits in the last 2 weeks of life while controlling for nursing hours. p><p>Design: Retrospective population-based cohort study. p><p>Setting/participants: Cancer patients with ≥1 family physician visit in 2006 from Ontario, Canada. Family physician continuity of care was assessed using two measures: Modified Usual Provider of Care score and visits/week. Its association with location of death and hospital and emergency department visits in the last 2 weeks of life was examined using logistic regression. p><p>Results: Of 9467 patients identified, the Modified Usual Provider of Care score demonstrated a dose-response relationship with increasing continuity associated with decreased odds of hospital death and visiting the hospital and emergency department in the last 2 weeks of life. More family physician visits/week were associated with lower odds of an emergency department visit in the last 2 weeks of life and hospital death, except for patients with greater than 4 visits/week, where they had increased odds of hospitalizations and hospital deaths. p><p>Conclusions: These results demonstrate an association between increased family physician continuity of care and decreased odds of several acute care outcomes in late life, controlling for homecare nursing and other covariates.©The Author(s) 2013 Reprints and permissions sagepub.co.uk/journalsPermissions.nav.p>

Investigation of Aircraft Panel Deformations during Riveting Process

In collaboration with Airbus-UK, the dimensional growth of small panels while being riveted with stiffeners is investigated. The stiffeners have been fastened to the panels with rivets and it has been observed that during this operation the panels expand in the longitudinal and transverse directions. It has been observed that the growth is variable and the challenge is to control the riveting process to minimize this variability. In this investigation, the assembly of the small panels and longitudinal stiffeners has been simulated using low and high fidelity nonlinear finite element models. The models have been validated against a limited set of experimental measurements; it was found that more accurate predictions of the riveting process are achieved using high fidelity explicit finite element models. Furthermore, through a series of numerical simulations and probabilistic analyses, the manufacturing process control parameters that influence panel growth have been identified. Alternative fastening approaches were examined and it was found that dimensional growth can be controlled by changing the design of the dies used for forming the rivets.