Spatially-resolved mapping of history-dependent coupled electrochemical and electronical behaviors of electroresistive NiO

Bias-induced oxygen ion dynamics underpins a broad spectrum of electroresistive and memristive phenomena in oxide materials. Although widely studied by device-level and local voltage-current spectroscopies, the relationship between electroresistive phenomena, local electrochemical behaviors, and microstructures remains elusive. Here, the interplay between history-dependent electronic transport and electrochemical phenomena in a NiO single crystalline thin film with a number of well-defined defect types is explored on the nanometer scale using an atomic force microscopy-based technique. A variety of electrochemically-active regions were observed and spatially resolved relationship between the electronic and electrochemical phenomena was revealed. The regions with pronounced electroresistive activity were further correlated with defects identified by scanning transmission electron microscopy. Using fully coupled mechanical-electrochemical modeling, we illustrate that the spatial distribution of strain plays an important role in electrochemical and electroresistive phenomena. These studies illustrate an approach for simultaneous mapping of the electronic and ionic transport on a single defective structure level such as dislocations or interfaces, and pave the way for creating libraries of defect-specific electrochemical responses.

Influence of micro and macro cracks due to sustained loading on chloride-induced corrosion of reinforced concrete beams

Chloride-induced corrosion of steel is one of the most commonly found problems affecting the durability of reinforced concrete structures in both marine environment and where de-icing salt is used in winter. As the significance of micro-cracks on chloride induced corrosion is not well documented, 24 reinforced concrete beams (4 different mixes - one containing Portland cement and another containing 35% ground granulated blastfurnace slag at 0.45 and 0.65 water-binder ratios) were subjected to three levels of sustained lateral loading (0%, 50% and 100% of the load that can induce 0.1 mm wide cracks on the tension surface of beam - F_0.1) in this work. The beams were then subjected to weekly cycles of wetting with 10% NaCl solution for 1 day followed by 6 days of drying at 20 (±1) °C up to an exposure period of 60 weeks. The progress of corrosion of steel was monitored using half-cell potential apparatus and linear polarisation resistance (LPR) test. These results have shown that macro-cracks (at load F_0.1) and micro-cracks (at 50% of F_0.1) greatly accelerated both the initiation and propagation stages of the corrosion of steel in the concrete beams. Lager crack widths for the F_0.1 load cases caused higher corrosion rates initially, but after about 38 weeks of exposure, there was a decrease in the rate of corrosion. However, such trends could not be found in 50% F _0.1 group of beams. The extent of chloride ingress also was influenced by the load level. These findings suggest that the effect of micro-cracking at lower loads are very important for deciding the service life of reinforced concrete structures in chloride exposure environments. © 2014 4th International Conference on the Durability of Concrete Structures.

Effect of Impeller Design on Homogeneity, Size and Strength of Pharmaceutical Granules produced by High Shear Wet Granulation

Small mixer impeller design is not tailored for granulation because impellers are intended for a wide range of processes. The aim of this research was to evaluate the performances of several impellers to provide guidance on the selection and design for the purposes of granulation. Lactose granules were produced using wet granulation with water as a binder. A Kenwood KM070 mixer was used as a standard apparatus and five impeller designs with different shapes and surface areas were used. The efficacy of granulate formation was measured by adding an optically sensitive tracer to determine variations in active ingredient content across random samples of granules from the same size classes. It was found that impeller design influenced the homogeneity of the granules and therefore can affect final product performance. The variation in active ingredient content across granules of differing size was also investigated. The results show that small granules were more potent than larger granules.

The role of Optical Coherence Tomography (OCT) for the diagnosis, monitoring, and guiding of treatment for neovascular Age-related Macular Degeneration (nAMD): an evidence synthesis study

Purpose:To determine the optimal role of OCT in diagnosing and monitoring nAMD (detecting disease activity and the need for further anti-VEGF treatment).
Methods:Systematic review. Major electronic databases and websites were searched. Studies were included if they reported the diagnostic performance of time domain or spectral domain OCT (or selected other tests) against a reference standard of ophthalmologist-interpreted fluorescein angiography in people with newly suspected or previously diagnosed nAMD. Risk of bias was assessed by two independent investigators using QUADAS-2. Summary receiver operating characteristic (SROC) curves were produced for each test given sufficient data.
Results:3700 titles/abstracts were screened, and 120 (3.2%) were selected for full-text assessment. A total of 22 studies were included (17 on diagnosis, 7 monitoring, and 3 both). From 15 studies reporting OCT data, sensitivity and specificity ranged from 59% to 100% and 27% to 100%, respectively.
Conclusions:The reported diagnostic performance of OCT showed large variability. The methodological quality of most studies was sub-optimal.

Surrogate-based analysis and optimization for the design of heat sinks with jet impingement

Heat sinks are widely used for cooling electronic devices and systems. Their thermal performance is usually determined by the material, shape, and size of the heat sink. With the assistance of computational fluid dynamics (CFD) and surrogate-based optimization, heat sinks can be designed and optimized to achieve a high level of performance. In this paper, the design and optimization of a plate-fin-type heat sink cooled by impingement jet is presented. The flow and thermal fields are simulated using the CFD simulation; the thermal resistance of the heat sink is then estimated. A Kriging surrogate model is developed to approximate the objective function (thermal resistance) as a function of design variables. Surrogate-based optimization is implemented by adaptively adding infill points based on an integrated strategy of the minimum value, the maximum mean square error approach, and the expected improvement approaches. The results show the influence of design variables on the thermal resistance and give the optimal heat sink with lowest thermal resistance for given jet impingement conditions. 

Cross-age tutoring in kindergarten and elementary school settings: a systmeatic review and meta-analysis

Background: Qualified teaching staffs are neither available nor affordable to provide large numbers of children with individual attention. One solution to providing individual tuition has been the development of tutoring programs that are delivered by nonprofessional tutors, such as classmates, older children and community volunteers. Objectives: We have conducted a systematic review of cross-age tutoring interventions delivered by non-professional tutors to children between 5 and 11 years old. Only randomized controlled trials with reliable measures of academic outcomes, and continuing for at least 12 weeks, compared to instruction as usual, were included. Results: Searches of electronic databases and previous reviews, and contacts with researchers yielded 11,564 titles; after screening, 15 studies were included in the analysis. Cross-age tutoring showed small significant effects for tutees on the composite measure of reading (g=0.18, 95% CI: 0.08, 0.27, N=8251), decoding skills (g=0.29, 95% CI: 0.13, 0.44, N=7081), and reading comprehension (g=0.11, 95% CI: 0.01, 0.21, N=6945). No significant effects were detected for other reading sub-skills or for mathematics. The quality of evidence is decreased by study limitations and high heterogeneity of effects. Conclusions: The benefits for tutees of non-professional peer and cross-age tutoring can be given a positive but weak recommendation, considering the low quality of evidence and lack of cost information. Subgroup analyses suggested that highly-structured reading programs may be more useful than loosely-structured programs. Large-scale replication trials using factorial design, process evaluations, reliable outcome measures and logic models are needed to better understand under what conditions, and for whom, cross-age non-professional tutoring may be effective.

Oxygen vacancy formation in CeO2 and Ce1-xZrxO2 solid solutions:electron localization, electrostatic potential and structural relaxation

Ceria (CeO2) and ceria-based composite materials, especially Ce1-xZrxO2 solid solutions, possess a wide range of applications in many important catalytic processes, such as three-way catalysts, owing to their excellent oxygen storage capacity (OSC) through the oxygen vacancy formation and refilling. Much of this activity has focused on the understanding of the electronic and structural properties of defective CeO2 with and without doping, and comprehending the determining factor for oxygen vacancy formation and the rule to tune the formation energy by doping has constituted a central issue in material chemistry related to ceria. However, the calculation on electronic structures and the corresponding relaxation patterns in defective CeO2-x oxides remains at present a challenge in the DFT framework. A pragmatic approach based on density functional theory with the inclusion of on-site Coulomb correction, i.e. the so-called DFT + U technique, has been extensively applied in the majority of recent theoretical investigations. Firstly, we review briefly the latest electronic structure calculations of defective CeO2(111), focusing on the phenomenon of multiple configurations of the localized 4f electrons, as well as the discussions of its formation mechanism and the catalytic role in activating the O-2 molecule. Secondly, aiming at shedding light on the doping effect on tuning the oxygen vacancy formation in ceria-based solid solutions, we summarize the recent theoretical results of Ce1-xZrxO2 solid solutions in terms of the effect of dopant concentrations and crystal phases. A general model on O vacancy formation is also discussed; it consists of electrostatic and structural relaxation terms, and the vital role of the later is emphasized. Particularly, we discuss the crucial role of the localized structural relaxation patterns in determining the superb oxygen storage capacity in kappa-phase Ce1-xZr1-xO2. Thirdly, we briefly discuss some interesting findings for the oxygen vacancy formation in pure ceria nanoparticles (NPs) uncovered by DFT calculations and compare those with the bulk or extended surfaces of ceria as well as different particle sizes, emphasizing the role of the electrostatic field in determining the O vacancy formation.

The interaction between adsorbed OH and O-2 on TiO2 surfaces

Reduced TiO2 (110) surfaces usually have OH groups as a result of H2O dissociation at oxygen vacancy defects. Because of excess electrons due to OH adsorption, OH/TiO2. exhibit interesting properties favorable to further O-2 or H2O adsorption. Both O-2 and H2O can adsorb and easily diffuse on the OH/TiO2 surface; such behavior plays a significant role in photocatalysis, heterogeneous catalysis, electronic devices and sensors. Indeed, the processes of H2O dissociation, O-2 and H2O diffusion on Such TiO2 surfaces, in the presence of OH groups, are important issues in their own right. Herein, the most recent experimental and theoretical progresses in understanding the interactions between adsorbed OH groups and O-2, or H2O, over TiO2 (110) surfaces and their implications will be reviewed. (c) 2009 Elsevier Ltd. All rights reserved.

High temperature thermal stability studies of ultrathin Al2O3 layers deposited on native oxide and sulphur passivated InGaAs surfaces

High resolution synchrotron radiation core level photoemission measurements have been used to undertake a comparative study of the high temperature stability of ultrathin Al2O3 layers deposited by atomic layer deposition (ALD) on both sulphur passivated and native oxide covered InGaAs. The residual interfacial oxides between sulphur passivated InGaAs and the ultrathin Al2O3 layer can be substantially removed at high temperature (up to 700 °C) without impacting on the InGaAs stoichiometry while significant loss of indium was recorded at this temperature on the native oxide InGaAs surface.

In situ preparation of 3D graphene aerogels@hierarchical Fe3O4 nanoclusters as high rate and long cycle anode materials for lithium ion batteries

We describe a novel strategy for in situ fabrication of hierarchical Fe₃O₄ nanoclusters-GAs. Fe₃O₄ NCs-GAs deliver excellent rate capability (the reversible capacities obtained were 1442, 392 and 118 mA h g^-1 at 0.1C, 12C and 35C rates), and a high reversible capacity of 577 mA h g^-1 over 300 cycles at the current density of 5.2 A g^-1 (6C).

Design and results of a dual-gas Quasi-Phase matching (QPM) foil target

Quasi-phase matching (QPM) can be used to increase the conversion efficiency of the high harmonic generation (HHG) process. We observed QPM with an improved dual-gas foil target with a 1 kHz, 10 mJ, 30 fs laser system. Phase tuning and enhancement were possible within a spectral range from 17 nm to 30 nm. Furthermore analytical calculations and numerical simulations were carried out to distinguish QPM from other effects, such as the influence of adjacent jets on each other or the laser gas interaction. The simulations were performed with a 3 dimensional code to investigate the phase matching of the short and long trajectories individually over a large spectral range.

Human-directed gazing behaviour in puppies and adult dogs, Canis lupus familiaris

Recent evidence indicates that dogs' sociocognitive abilities and behaviour in a test situation are shaped by both genetic factors and life experiences. We used the 'unsolvable task' paradigm to investigate the effect of breed and age/experience on the use of human-directed gazing behaviour. Following a genetic classification based on recent genome analyses, dogs were allocated to three breed groups, namely Primitive, Hunting/Herding and Molossoid. Furthermore, we tested dogs at 2 months, 4.5. months and as adults. The test consisted of three solvable trials in which dogs could obtain food by manipulating a plastic container followed by an unsolvable trial in which obtaining the food became impossible. The dogs' behaviour towards the apparatus and the people present was analysed. At 2 months no breed group differences emerged and although human-directed gazing behaviour was observed in approximately half of the pups, it occurred for brief periods, suggesting that the aptitude to use human-directed gazing as a request for obtaining help probably develops at a later date when dogs have had more experience with human communication. Breed group differences, however, did emerge strongly in adult dogs and, although less pronounced, also in 4.5-month-old subjects, with dogs in the Hunting/Herding group showing significantly more human-directed gazing behaviour than dogs in the other two breed groups. These results suggest that, although the domestication process may have shaped the dog's human-directed communicative abilities, the later selection for specific types of work might also have had a significant impact on their emergence. © 2011 The Association for the Study of Animal Behaviour.

Agility and search and rescue training differently affects pet dogs' behaviour in socio-cognitive tasks

Both genetic factors and life experiences appear to be important in shaping dogs' responses in a test situation. One potentially highly relevant life experience may be the dog's training history, however few studies have investigated this aspect so far. This paper briefly reviews studies focusing on the effects of training on dogs' performance in cognitive tasks, and presents new, preliminary evidence on trained and untrained pet dogs' performance in an 'unsolvable task'. Thirty-nine adult dogs: 13 trained for search and rescue activities (S&R group), 13 for agility competition (Agility group) and 13 untrained pets (Pet group) were tested. Three 'solvable' trials in which dogs could obtain the food by manipulating a plastic container were followed by an 'unsolvable' trial in which obtaining the food became impossible. The dogs' behaviours towards the apparatus and the people present (owner and researcher) were analysed. Both in the first 'solvable' and in the 'unsolvable' trial the groups were comparable on actions towards the apparatus, however differences emerged in their human-directed gazing behaviour. In fact, results in the 'solvable' trial, showed fewer S&R dogs looking back at a person compared to agility dogs, and the latter alternating their gaze between person and apparatus more frequently than pet dogs. In the unsolvable trial no difference between groups emerged in the latency to look at the person however agility dogs looked longer at the owner than both pet and S&R dogs; whereas S&R dogs exhibited significantly more barking (always occurring concurrently to looking at the person or the apparatus) than both other groups. Furthermore, S&R dogs alternated their gaze between person and apparatus more than untrained pet dogs, with agility dogs falling in between these two groups. Thus overall, it seems that the dogs' human-directed communicative behaviours are significantly influenced by their individual training experiences. © 2009 Elsevier B.V. All rights reserved.