THE IMPROVED SIGN BIT ENCRYPTION OF MOTION VECTORS FOR H.264/AVC

In this paper, an improved video encryption method for encrypting the sign bit of motion vectors is proposed based on H.264/AVC, which belongs to selective encryption. This method improves upon previous work involving the sign bit encryption of motion vectors by ensuring the four candidates for the encrypted motion vectors are always located in two orthogonal lines. The improved method can provide a much more effective scrambling effect while keeping the encrypted stream format-compliant and the compression ratio unchanged. The combination of the proposed method with encryption of intra prediction modes can further enhance the scrambling effect, especially for the first few frames which are left clear when only the motion vectors are encrypted.

A Tunable Encryption Scheme and Analysis of Fast Selective Encryption for CAVLC and CABAC in H.264/AVC

Recently, two fast selective encryption methods for context-adaptive variable length coding and context-adaptive binary arithmetic coding in H.264/AVC were proposed by Shahid et al. In this paper, it was demonstrated that these two methods are not as efficient as only encrypting the sign bits of nonzero coefficients. Experimental results showed that without encrypting the sign bits of nonzero coefficients, these two methods can not provide a perceptual scrambling effect. If a much stronger scrambling effect is required, intra prediction modes, and the sign bits of motion vectors can be encrypted together with the sign bits of nonzero coefficients. For practical applications, the required encryption scheme should be customized according to a user's specified requirement on the perceptual scrambling effect and the computational cost. Thus, a tunable encryption scheme combining these three methods is proposed for H.264/AVC. To simplify its implementation and reduce the computational cost, a simple control mechanism is proposed to adjust the control factors. Experimental results show that this scheme can provide different scrambling levels by adjusting three control factors with no or very little impact on the compression performance. The proposed scheme can run in real-time and its computational cost is minimal. The security of the proposed scheme is also discussed. It is secure against the replacement attack when all three control factors are set to one.

Privacy Region Protection for H.264/AVC with Enhanced Scrambling Effect and a Low Bitrate Overhead

While video surveillance systems have become ubiquitous in our daily lives, they have introduced concerns over privacy invasion. Recent research to address these privacy issues includes a focus on privacy region protection, whereby existing video scrambling techniques are applied to specific regions of interest (ROI) in a video while the background is left unchanged. Most previous work in this area has only focussed on encrypting the sign bits of nonzero coefficients in the privacy region, which produces a relatively weak scrambling effect. In this paper, to enhance the scrambling effect for privacy protection, it is proposed to encrypt the intra prediction modes (IPM) in addition to the sign bits of nonzero coefficients (SNC) within the privacy region. A major issue with utilising encryption of IPM is that drift error is introduced outside the region of interest. Therefore, a re-encoding method, which is integrated with the encryption of IPM, is also proposed to remove drift error. Compared with a previous technique that uses encryption of IPM, the proposed re-encoding method offers savings in the bitrate overhead while completely removing the drift error. Experimental results and analysis based on H.264/AVC were carried out to verify the effectiveness of the proposed methods. In addition, a spiral binary mask mechanism is proposed that can reduce the bitrate overhead incurred by flagging the position of the privacy region. A definition of the syntax structure for the spiral binary mask is given. As a result of the proposed techniques, the privacy regions in a video sequence can be effectively protected by the enhanced scrambling effect with no drift error and a lower bitrate overhead.

Numerical prediction of the low-velocity impact damage and compression after impact strength of composite laminates

Low-velocity impact damage can drastically reduce the residual mechanical properties of the composite structure even when there is barely visible impact damage. The ability to computationally predict the extent of damage and compression after impact (CAI) strength of a composite structure can potentially lead to the exploration of a larger design space without incurring significant development time and cost penalties. A three-dimensional damage model, to predict both low-velocity impact damage and compression after impact CAI strength of composite laminates, has been developed and implemented as a user material subroutine in the commercial finite element package, ABAQUS/Explicit. The virtual tests were executed in two steps, one to capture the impact damage and the other to predict the CAI strength. The observed intra-laminar damage features, delamination damage area as well as residual strength are discussed. It is shown that the predicted results for impact damage and CAI strength correlated well with experimental testing.

Numerical prediction of the low-velocity impact damage and compression after impact strength of composite laminates

Low-velocity impact damage can drastically reduce the residual mechanical properties of the composite structure even when there is barely visible impact damage. The ability to computationally predict the extent of damage and compression after impact (CAI) strength of a composite structure can potentially lead to the exploration of a larger design space without incurring significant development time and cost penalties. A three-dimensional damage model, to predict both low-velocity impact damage and compression after impact CAI strength of composite laminates, has been developed and implemented as a user material subroutine in the commercial finite element package, ABAQUS/Explicit. The virtual tests were executed in two steps, one to capture the impact damage and the other to predict the CAI strength. The observed intra-laminar damage features, delamination damage area as well as residual strength are discussed. It is shown that the predicted results for impact damage and CAI strength correlated well with experimental testing.

The African National Congress and its Critics: 'Predatory Liberalism', Black Empowerment and Intra-Alliance Tensions in Post-Apartheid South Africa

Post-apartheid South Africa is characterized by centralized, neo-liberal policymaking that perpetuates, and in some cases exaggerates, socio-economic inequalities inherited from the apartheid era. The African National Congress (ANC) leadership’s alignment with powerful international and domestic market actors produces tensions within the Tripartite Alliance and between government and civil society. Consequently, several characteristics of ‘predatory liberalism’ are evident in contemporary South Africa: neo-liberal restructuring of the economy is combined with an increasing willingness by government to assert its authority, to marginalize and delegitimize those critical of its abandonment of inclusive governance. A new form of oligarch power, combining entrenched economic interests with those of a new ‘black bourgeoisie’ promoted by narrowly implemented Black Economic Empowerment policies, diminishes prospects for broad-based socio-economic transformation. Because the new policy environment is failing to resolve tensions between global market demands for increasing market liberalization and domestic popular demands for poverty-alleviation and socio-economic transformation, the ANC leadership is forced increasingly to confront ‘ultra-leftists’ who are challenging its credentials as defender of the National Democratic Revolution which was the cornerstone in the anti-apartheid struggle.

A note on the prediction of liquid hold-up with the stratified roll wave regime for gas/liquidco-current flow in horizontal pipes.

This note presents a simple model for prediction of liquid hold-up in two-phase horizontal pipe flow for the stratified roll wave (St+RW) flow regime. Liquid hold-up data for horizontal two-phase pipe flow [1, 2, 3, 4, 5 and 6] exhibit a steady increase with liquid velocity and a more dramatic fall with increasing gas rate as shown by Hand et al. [7 and 8] for example. In addition the liquid hold-up is reported to show an additional variation with pipe diameter. Generally, if the initial liquid rate for the no-gas flow condition gives a liquid height below the pipe centre line, the flow patterns pass successively through the stratified (St), stratified ripple (St+R), stratified roll wave, film plus droplet (F+D) and finally the annular (A+D, A+RW, A+BTS) regimes as the gas rate is increased. Hand et al. [7 and 8] have given a detailed description of this progression in flow regime development and definitions of the patterns involved. Despite the fact that there are over one hundred models which have been developed to predict liquid hold-up, none have been shown to be universally useful, while only a handful have proven to be applicable to specific flow regimes [9, 10, 11 and 12]. One of the most intractable regimes to predict has been the stratified roll wave pattern where the liquid hold-up shows the most dramatic change with gas flow rate. It has been suggested that the momentum balance-type models, which give both hold-up and pressure drop prediction, can predict universally for all flow regimes but particularly in the case of the difficult stratified roll wave pattern. Donnelly [1] recently demonstrated that the momentum balance models experienced some difficulties in the prediction of this regime. Without going into lengthy details, these models differ in the assumed friction factor or shear stress on the surfaces within the pipe particularly at the liquid–gas interface. The Baker–Jardine model [13] when tested against the 0.0454 m i.d. data of Nguyen [2] exhibited a wide scatter for both liquid hold-up and pressure drop as shown in Fig. 1. The Andritsos–Hanratty model [14] gave better prediction of pressure drop but a wide scatter for liquid hold-up estimation (cf. Fig. 2) when tested against the 0.0935 m i.d. data of Hand [5]. The Spedding–Hand model [15], shown in Fig. 3 against the data of Hand [5], gave improved performance but was still unsatisfactory with the prediction of hold-up for stratified-type flows. The MARS model of Grolman [6] gave better prediction of hold-up (cf. Fig. 4) but deterioration in the estimation of pressure drop when tested against the data of Nguyen [2]. Thus no method is available that will accurately predict liquid hold-up across the whole range of flow patterns but particularly for the stratified plus roll wavy regime. The position is particularly unfortunate since the stratified-type regimes are perhaps the most predominant pattern found in multiphase lines.

Modelling and Prediction of NOx Emission in a Coal-Fired Power Generation Plant

In this paper NOx emissions modelling for real-time operation and control of a 200 MWe coal-fired power generation plant is studied. Three model types are compared. For the first model the fundamentals governing the NOx formation mechanisms and a system identification technique are used to develop a grey-box model. Then a linear AutoRegressive model with eXogenous inputs (ARX) model and a non-linear ARX model (NARX) are built. Operation plant data is used for modelling and validation. Model cross-validation tests show that the developed grey-box model is able to consistently produce better overall long-term prediction performance than the other two models.