The effect of simvastatin on bone formation and ceramic resorption in a peri-implant defect model

Experimental use of statins as stimulators of bone formation suggests they may have widespread applicability in the field of orthopaedics. With their combined effects on osteoblasts and osteoclasts, statins have the potential to enhance resorption of synthetic materials and improve bone ingrowth. In this study, the effect of oral and local administration of simvastatin to a 0 tricalcium phosphate (beta TCP)-filled defect around an implant was compared with recombinant human bone morphogenetic protein 2 (rhBMP2). On hundred and sixty-two Sprague-Dawley rats were assigned to treatment groups: local application of 0.1, 0.9 or 1.7 mg of simvastatin, oral simvastatin at 5, 10 or 50 mg kg(-1) day(-1) for 20 days, local delivery of I or 10 mu g of rhBMP2, or control. At 6 weeks rhBMP2 increased serum tartrate-resistant acid phosphatase 5b levels and reduced PTCP area fraction, particle size and number compared with control, suggesting increased osteoclast activity. There was reduced stiffness and increased mechanical strength with this treatment. Local simvastatin resulted in a decreased mineral apposition rate at 6 weeks and increased fibrous area fraction, PTCP area fraction, particle size and number at 26 weeks. Oral simvastatin had no effect compared with control. Local application of rhBMP2 increased resorption and improved mechanical strength whereas simvastatin was detrimental to healing. Oral simvastatin was ineffective at promoting either ceramic resorption or bone formation. The effect of statins on the repair of bone defects with graft substitute materials is influenced by its bioavailability. Thus, further studies on the optimal delivery system are needed. (C) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Potentiation of triclabendazole action in vivo against a triclabendazole-resistant isolate of Fasciola hepatica following its co-administration with the metabolic inhibitor, ketoconazole

An in vivo study in the laboratory rat model has been carried out to monitor morphological changes in adult Fasciola hepatica over a 4-day period resulting from co-treatment with triclabendazole (TCBZ) and ketoconazole (KTZ), a cytochrome P450 inhibitor. Rats were infected with the triclabendazole-resistant Oberon isolate of F. hepatica, dosed orally with triclabendazole at a dosage of 10mg/kg live weight and ketoconazole at a dosage of 10mg/kg live weight. Flukes were recovered at 24, 48, 72 and 96 h post-treatment (p.t.) and changes to fluke ultrastructure were assessed using transmission electron microscopy (TEM). Results showed an increase in the severity of changes to the fluke ultrastructure with time p.t. Swelling of the basal infolds and the associated mucopolysaccharide masses became more severe with time. Golgi complexes, if present, were greatly reduced in size and number by 96 h p.t., and sub-tegumental flooding was seen from the 72 h time-period onwards. Some sloughing of the tegumental covering over the spines was observed at 96 h p.t. The results demonstrated that the Oberon isolate is more sensitive to TCBZ action in the presence of KTZ than to TCBZ alone, reinforcing the idea that altered drug metabolism is involved in the resistance mechanism. Moreover, they support the concept that TCBZ+inhibitor combinations (aimed at altering drug pharmacokinetics and potentiating the action of TCBZ) could be used in the treatment of TCBZ-R populations of F. hepatica.

Low cycle fatigue properties of CLAM steel at 823 K

China Low Activation Martensitic (CLAM) steel is considered to be the main candidate material for the first wall components of future fusion reactors in China. In this paper, the low cycle fatigue (LCF) behavior of CLAM steel is studied under fully reversed tension–compression loading at 823 K in air. Total strain amplitude was controlled from 0.14% to 1.8% with a constant strain rate of 2.4×10−3 s−1. The corresponding plastic strain amplitude ranged from 0.023% to 1.613%. The CLAM steel displayed continuous softening to failure at 823 K. The relationship between strain, stress and fatigue life was obtained using the parameters obtained from fatigue tests. The LCF properties of CLAM steel at 823 K followed Coffin–Manson relationship. Furthermore, irregular serration was observed on the stress–strain hysteresis loops of CLAM steel tested with the total strain amplitude of 0.45–1.8%, which was attributed to the dynamic strain aging (DSA) effect. During continuous cyclic deformation, the microstructure and precipitate distribution of CLAM steel changed gradually. Many tempered martensitic laths were decomposed into subgrains, and the size and number of M23C6 carbide and MX carbonitride precipitates decreased with the increase of total strain amplitude. The response cyclic stress promoted the recovery of martensitic lath, while the thermal activation mainly played an important role on the growth of precipitates in CLAM steel at 823 K. In order to have a better understanding of high-temperature LCF behavior, the potential mechanisms controlling stress–strain response, DSA phenomenon and microstructure changes have also been evaluated.

DocLite: A Docker-Based Lightweight Cloud Benchmarking Tool

Existing benchmarking methods are time consuming processes as they typically benchmark the entire Virtual Machine (VM) in order to generate accurate performance data, making them less suitable for real-time analytics. The research in this paper is aimed to surmount the above challenge by presenting DocLite - Docker Container-based Lightweight benchmarking tool. DocLite explores lightweight cloud benchmarking methods for rapidly executing benchmarks in near real-time. DocLite is built on the Docker container technology, which allows a user-defined memory size and number of CPU cores of the VM to be benchmarked. The tool incorporates two benchmarking methods - the first referred to as the native method employs containers to benchmark a small portion of the VM and generate performance ranks, and the second uses historic benchmark data along with the native method as a hybrid to generate VM ranks. The proposed methods are evaluated on three use-cases and are observed to be up to 91 times faster than benchmarking the entire VM. In both methods, small containers provide the same quality of rankings as a large container. The native method generates ranks with over 90% and 86% accuracy for sequential and parallel execution of an application compared against benchmarking the whole VM. The hybrid method did not improve the quality of the rankings significantly.

Cardiomyopathy in Offspring of Pregestational Diabetic Mouse Pregnancy

PURPOSE: To investigate cardiomyopathy in offspring in a mouse model of pregestational type 1 diabetic pregnancy.

METHODS: Pregestational diabetes was induced with STZ administration in female C57BL6/J mice that were subsequently mated with healthy C57BL6/J males. Offspring were sacrificed at embryonic day 18.5 and 6-week adolescent and 12-week adult stages. The size and number of cardiomyocyte nuclei and also the extent of collagen deposition within the hearts of diabetic and control offspring were assessed following cardiac tissue staining with either haematoxylin and eosin or Picrosirius red and subsequently quantified using automated digital image analysis.

RESULTS: Offspring from diabetic mice at embryonic day 18.5 had a significantly higher number of cardiomyocyte nuclei present compared to controls. These nuclei were also significantly smaller than controls. Collagen deposition was shown to be significantly increased in the hearts of diabetic offspring at the same age. No significant differences were found between the groups at 6 and 12 weeks.

CONCLUSIONS: Our results from offspring of type 1 diabetic mice show increased myocardial collagen deposition in late gestation and have increased myocardial nuclear counts (hyperplasia) as opposed to increased myocardial nuclear size (hypertrophy) in late gestation. These changes normalize postpartum after removal from the maternal intrauterine environment.

A VLSI Architecture for Variable Block Size Video Motion Estimation

With the advent of new video standards such as MPEG-4 part-10 and H.264/H.26L, demands for advanced video coding, particularly in the area of variable block size video motion estimation (VBSME), are increasing. In this paper, we propose a new one-dimensional (1-D) very large-scale integration architecture for full-search VBSME (FSVBSME). The VBS sum of absolute differences (SAD) computation is performed by re-using the results of smaller sub-block computations. These are distributed and combined by incorporating a shuffling mechanism within each processing element. Whereas a conventional 1-D architecture can process only one motion vector (MV), this new architecture can process up to 41 MV sub-blocks (within a macroblock) in the same number of clock cycles.

Bismuth embrittlement of copper is an atomic size effect

Embrittlement by the segregation of impurity elements to grain boundaries is one of a small number of phenomena that can lead to metallurgical failure by fast fracture(1). Here we settle a question that has been debated for over a hundred years(2): how can minute traces of bismuth in copper cause this ductile metal to fail in a brittle manner? Three hypotheses for Bi embrittlement of Cu exist: two assign an electronic effect to either a strengthening(3) or weakening(4) of bonds, the third postulates a simple atomic size effect(5). Here we report first principles quantum mechanical calculations that allow us to reject the electronic hypotheses, while supporting a size effect. We show that upon segregation to the grain boundary, the large Bi atoms weaken the interatomic bonding by pushing apart the Cu atoms at the interface. The resolution of the mechanism underlying grain boundary weakening should be relevant for all cases of embrittlement by oversize impurities.

Maternal effects on offspring size and packaging constraints in the whelk

Life-history theory predicts an optimal offspring size, irrespective of reproductive effort; however, in some species offspring size correlates positively with maternal size. We examine hypotheses for why this latter situation should occur in the whelk Buccinum undatum. The trade-offs between aspects of reproduction in whelks are complicated due to the provision of protective egg capsules. Many eggs are placed within each capsule but c. 99% of these eggs are consumed by the remaining developing young. Large maternal size results in more eggs, larger eggs, more eggs consumed per hatchling, more capsules, larger capsules, more eggs per capsule, a larger number of hatchlings per capsule and larger hatchlings. Increased intra-capsule and post-hatch sibling competition may decrease the marginal value for additional young and select for larger young, however, our data do not support this explanation. Instead, packaging constraints within each capsule limit the size of hatchlings but this constraint is relaxed for medium to large females because they produce large capsules. Small females appear to produce young below optimum size because of the space constraint thus explaining the correlation between maternal size and offspring size.

Effect of batch size on mechanical properties of granules in high shear granulation

The flow patterns in a high shear granulator depend on the fill volume. For example, DEM simulations reported by Terashita et al. [1] show that fill volume affects the velocities and kinetic energies of the particles. It also influences the granule size distribution [2]. Here the effects on the properties of the granule are described. The total mass of the granulate material was varied without changing the other variables such as impeller speed, granulation time and liquid to solid ratio. The resulting mechanical properties, such as strength, yield stress and Young's modulus, of the granules were measured. For the materials studied in the current work, increasing the fill factor (batch size) increased the values of these material parameters. This could be explained by the relative increase in the number and intensity of collisions between the particles, when the size of a batch was increased, leading to smaller porosities. (c) 2010 Elsevier B.V. All rights reserved.

Genome-wide association of early-onset myocardial infarction with single nucleotide polymorphisms and copy number variants

We conducted a genome-wide association study testing single nucleotide polymorphisms (SNPs) and copy number variants (CNVs) for association with early-onset myocardial infarction in 2,967 cases and 3,075 controls. We carried out replication in an independent sample with an effective sample size of up to 19,492. SNPs at nine loci reached genome-wide significance: three are newly identified (21q22 near MRPS6-SLC5A3-KCNE2, 6p24 in PHACTR1 and 2q33 in WDR12) and six replicated prior observations1-4 (9p21, 1p13 near CELSR2-PSRC1-SORT1, 10q11 near CXCL12, 1q41 in MIA3, 19p13 near LDLR and 1p32 near PCSK9). We tested 554 common copy number polymorphisms (>1% allele frequency) and none met the pre-specified threshold for replication (P < 10-3). We identified 8,065 rare CNVs but did not detect a greater CNV burden in cases compared to controls, in genes compared to the genome as a whole, or at any individual locus. SNPs at nine loci were reproducibly associated with myocardial infarction, but tests of common and rare CNVs failed to identify additional associations with myocardial infarction risk.

The size distribution of Jupiter Family comet nuclei

We present an updated cumulative size distribution (CSD) for Jupiter Family comet (JFC) nuclei, including a rigorous assessment of the uncertainty on the slope of the CSD. The CSD is expressed as a power law, N(>rN) ?r-qN, where rN is the radius of the nuclei and q is the slope. We include a large number of optical observations published by us and others since the comprehensive review in the Comets II book, and make use of an improved fitting method. We assess the uncertainty on the CSD due to all of the unknowns and uncertainties involved (photometric uncertainty, assumed phase function, albedo and shape of the nucleus) by means of Monte Carlo simulations. In order to do this we also briefly review the current measurements of these parameters for JFCs. Our final CSD has a slope q= 1.92 ± 0.20 for nuclei with radius rN= 1.25 km.

Fasciola hepatica: Comparative effects of host resistance and parasite intra-specific interactions on size and reproductive histology in flukes from rats infected with isolates differing in triclabendazole sensitivity

The efficacies of putative fasciolicides and vaccines against Fasciola hepatica are frequently monitored in clinical and field trials by determination of fluke egg output in host faeces and by worm counts in the host liver at autopsy. Less often used are parameters based on fluke size and histology, yet these can provide important indications of specific effects on the development of particular germ-line or somatic tissues, especially in relation to the timing and profligacy of egg production. In this study. F. hepatica metacercariae of two distinct isolates, the triclabendazole (TCBZ)-sensitive Cullompton isolate and the TCBZ-resistant Oberon isolate, were administered to rats as single-isolate or mixed-isolate infections. At autopsy 16 weeks later individual adult flukes were counted, measured and the reproductive organs were examined histologically. The degree of development of the testis tubules in each fluke was represented by a numerical score, based on the proportion of the histological section profiles occupied by testis tissue. The level of anti-F. hepatica antibody in the serum of each rat was determined by ELISA. It was found that Cullompton flukes were significantly larger than Oberon flukes, and that significantly more Cullompton metacercariae developed to adults than Oberon metacercariae. The Cullompton flukes showed histological evidence of aspermy and spermatogenic arrest, which was reflected in quantitatively reduced testicular development, as compared with the Oberon isolate. In Cullompton flukes, parthenogenetic egg development is implied. The size of Cullompton and Oberon flukes was significantly related to the number of adult flukes recovered, to the number of metacercariae administered, and to the percentage success of infection. The testis development score in both isolates was significantly related to the number of adult flukes recovered but not to the number of metacercariae administered, or to the percentage success of infection. Fluke size was positively related to testis score for both isolates, and a significant negative relationship was found between percentage success of infection and metacercarial dose. The results are interpreted in terms of differing interactions between various numbers of young flukes and host immunity during invasion of and migration in the hepatic parenchyma, and of fluke intra-specific (possibly pheromonal) stimulatory effects in the final stages of development, within the host bile ducts. No significant relationships were found between host antibody levels and fluke size or testis score. False positive serological reactions were found in some rats that had been infected, but found to harbour no flukes at autopsy. Clearly the act of eliminating the flukes involved generation of an immune response. (C) 2011 Elsevier B.V. All rights reserved.

Droplet size control with methanol-repellent surface in a sampling device for continuous annular electrochromatography

The eluent droplet size defines the number of sampling compartments in a continuously operated annular electrochromatograph and therefore influences separation efficiency. In this work, an assembly of two capillaries, a feeding capillary on the top and a receiving capillary placed under it, has been investigated to control droplet size. The receiving capillary prevents the liquid droplet formation beyond a critical size, which reduces the volume of sampling compartment as compared with the case of the electrolyte flow driven solely by gravity. With a receiving capillary, the electrolyte droplet size was reduced from 1.5 to 0.46 mm. Further decrease of droplet size was not possible due to a so-called droplet jump upwards effect which has been observed on a hydrophilic glass surface with water. A typical electrolyte used in CAEC has high methanol content. In an attempt to improve the methanol-repellent properties of the glass surface, two approaches have been implemented: (i) self-assembled chemisorbed monolayers of an alkylsiloxane and (ii) fabrication of a nano-pin film. The methanol-repellent surface of the feeding capillary suppressed the droplet jump upwards effect. The surface remained methanol repellent in different solutions with lower polarity than that of water.

Why the size structure of marine communities can require decades to recover from fishing

A dynamic food-web model of more than 1000 species was used to quantify the recovery trajectory of marine community size-structure under different hypothetical fishing regimes, using the Northeast Atlantic as an example. Size-structure was summarised by four indicators: the Large Fish Indicator (LFI), the Large Species Indicator (LSI), the biomass-weighted mean maximum length of fish species (EMBED Equation.3) and the biomass-weighted mean maturation length of fish species (EMBED Equation.3). Time-series of these indicators recorded recovery following release from fishing with various size-selectivities, intensities and durations. In model simulations, fishing-induced trophic cascades were observed to distort fish community size-structure, but these did not have a large influence on recovery level or duration as measured by the four indicators. However, simulations showed that local extinctions of large fish species increased in number with both fishing intensity and duration, and could strongly limit the recovery level. Recovery of fish community size-structure to near equilibrium frequently took multiple decades in simulations; these long transient periods suggest that management interventions for size-structure recovery may require much longer than previously thought. Our results demonstrate the need for community-level modelling to set realistic targets for management of community size-structure.