Aerospace Stiffened Panel Initial Sizing With Novel Skin Sub-Stiffening Features

The introduction of skin sub-stiffening features has the potential to modify the local stability and fatigue crack growth performance of stiffened panels. Proposed herein is a method to enable initial static strength sizing of panels with such skin sub-stiffening features. The method uses bespoke skin buckling coefficients, automatically generated by Finite Element analysis and thus limits the modification to the conventional aerospace panel initial sizing process. The approach is demonstrated herein and validated for prismatic sub-stiffening features. Moreover, examination of the generated buckling coefficient data illustrates the influence of skin sub-stiffening on buckling behavior, with static strength increases typically corresponding to a reduction in the number of initial skin longitudinal buckle half-waves.

A simplified procedure for sizing solar thermal systems based on national assessment methods in the UK and Ireland.

Solar heating systems have the potential to be an efficient renewable energy technology, provided they are sized correctly. Sizing a solar thermal system for domestic applications does not warrant the cost of a simulation. As a result simplified sizing procedures are required. The size of a system depends on a number of variables including the efficiency of the collector itself, the hot water demand and the solar radiation at a given location. Domestic Hot Water (DHW) demand varies with time and is assessed using a multi-parameter detailed model. Secondly, the national energy evaluation methodologies are evaluated from the perspective of solar thermal system sizing. Based on the assessment of the standards, limitations in the evaluation method for solar thermal systems are outlined and an adapted method, specific to the sizing of solar thermal systems, is proposed. The methodology is presented for two common dwelling scenarios. Results from this showed that it is difficult to achieve a high solar fraction given practical sizes of system infrastructure (storage tanks) for standard domestic properties. However, solar thermal systems can significantly offset energy loads due associated DHW consumption, particularly when sized appropriately. The presented methodology is valuable for simple solar system design and also for the quick comparison of salient criteria.

A comparison of endoscopy versus pathology sizing of colorectal adenomas and potential implications for surveillance colonoscopy

Background and AimsTo compare endoscopy and pathology sizing in a large population-based series of colorectal adenomas and to evaluate the implications for patient stratification into surveillance colonoscopy.MethodsEndoscopy and pathology sizes available from intact adenomas removed at colonoscopies performed as part of the Northern Ireland Bowel Cancer Screening Programme, from 2010 to 2015, were included in this study. Chi-squared tests were applied to compare size categories in relation to clinicopathological parameters and colonoscopy surveillance strata according to current American Gastroenterology Association and British Society of Gastroenterology guidelines.ResultsA total of 2521 adenomas from 1467 individuals were included. There was a trend toward larger endoscopy than pathology sizing in 4 of the 5 study centers, but overall sizing concordance was good. Significantly greater clustering with sizing to the nearest 5 mm was evident in endoscopy versus pathology sizing (30% vs 19%, p<0.001), which may result in lower accuracy. Applying a 10-mm cut-off relevant to guidelines on risk stratification, 7.3% of all adenomas and 28.3% of those 8 to 12 mm in size had discordant endoscopy and pathology size categorization. Depending upon which guidelines are applied, 4.8% to 9.1% of individuals had differing risk stratification for surveillance recommendations, with the use of pathology sizing resulting in marginally fewer recommended surveillance colonoscopies.ConclusionsChoice of pathology or endoscopy approaches to determine adenoma size will potentially influence surveillance colonoscopy follow-up in 4.8% to 9.1% of individuals. Pathology sizing appears more accurate than endoscopy sizing, and preferential use of pathology size would result in a small, but clinically important, decreased burden on surveillance colonoscopy demand. Careful endoscopy sizing is required for adenomas removed piecemeal.

Andrew Marvell's Latin Poetry: From Text to Context (356pp.)

David Norbrook, Review of English Studies 56 (Sept. 2005), 675-6.
‘We have waited a long time for a study of Marvell’s Latin poetry; fortunately, Estelle Haan’s monograph generously makes good the loss ... One of her most intriguing suggestions … is that Marvell may have presented paired poems like ‘Ros’ and ‘On a Drop of Dew’, and the poems to the obligingly named Dr Witty, to his student Maria Fairfax as his own patterns for the pedagogical practice of double translation. Perhaps the most original parts of the book, however, move beyond the familiar canon to cover the generic range of the Latin verse. Haan offers a very full contextualization of the early Horatian Ode to Charles I in seventeenth-century exercises in parodia. In a rewarding reading of the poem to Dr Ingelo she shows how Marvell deploys the language of Ovid’s Tristia to present Sweden as a place of shivering exile, only to subvert this model with a neo-Virgilian celebration of Christina as a virtuous, city-building Dido. She draws extensively on historical as well as literary sources to offer very detailed contextualizations of the poem to Maniban and ‘Scaevola Scotto-Britannus’... This monograph opens up many new ways into the Latin verse, not least because it is rounded off with new texts and prose translations of the Latin poems. These make a substantial contribution in their own right. They are the best and most accurate translations to date (those in Smith’s edition having some lapses); they avoid poeticisms but bring out the structure of the poems' wordplay very clearly. This book brings us a lot closer to seeing Marvell whole.'

CO oxidation and NO reduction on metal surfaces: density functional theory investigations

This article reviews the accumulated theoretical results, in particular density functional theory calculations, on two catalytic processes, CO oxidation and NO reduction on metal surfaces. Owing to their importance in automotive emission control, these two reactions have generated a lot of interest in the last 20 years. Here the pathways and energetics of the involved elementary reactions under different catalytic conditions are described in detail and the understanding of the reactions is generalized. It is concluded that density functional theory calculations can be applied to catalysis to elucidate mechanisms of complex surface reactions and to understand the electronic structure of chemical processes in general. The achieved molecular knowledge of chemical reactions is certainly beneficial to new catalyst design.

Psychological problems in children with cerebral palsy: A cross-sectional European study

Objectives: To describe psychological symptoms in 8–12-year-old children with cerebral palsy; to investigate predictors of these symptoms and their impact on the child and family.

Design: A cross-sectional multi-centre survey.

Participants: Eight hundred and eighteen children with cerebral palsy, aged 8–12 years, identified from population-based registers of cerebral palsy in eight European regions and from multiple sources in one further region.

Main outcome measures: The Strengths and Difficulties Questionnaire (SDQ)P4-16 and the Total Difficulties Score (TDS) dichotomised into normal/borderline (TDS = 16) versus abnormal (TDS > 16).

Statistical analysis: Multilevel, multivariable logistic regression to relate the presence of psychological symptoms to child and family characteristics.

Results: About a quarter of the children had TDS > 16 indicating significant psychological symptoms, most commonly in the domain Peer Problems. Better gross motor function, poorer intellect, more pain, having a disabled or ill sibling and living in a town were independently associated with TDS > 16. The risk of TDS > 16 was odds ratio (OR) = .2 (95% CI: .1 to .3) comparing children with the most and least severe functional limitations; OR = 3.2 (95%CI: 2.1 to 4.8) comparing children with IQ < 70 and others; OR = 2.7 (95% CI: 1.5 to 4.6) comparing children in severe pain and others; OR = 2.7 (95% CI:1.6 to 4.6) comparing children with another disabled sibling or OR = 1.8 (95%CI: 1.2 to 2.8) no siblings and others; OR = 1.8 (95% CI: 1.1 to 2.8) comparing children resident in a town and others. Among parents who reported their child to have psychological problems, 95% said they had lasted over a year, 37% said they distressed their child and 42% said they burdened the family at least ‘quite a lot’.

Conclusions: A significant proportion of children with cerebral palsy have psychological symptoms or social impairment sufficiently severe to warrant referral to specialist services. Care must be taken in the assessment and management of children with cerebral palsy to ensure psychological problems are not overlooked and potentially preventable risk factors like pain are treated effectively. The validity of the SDQ for children with severe disability warrants further assessment.

A comprehensive comparison between generalized incidence calculus and Dempster-Shafer theory of evidence.

Dealing with uncertainty problems in intelligent systems has attracted a lot of attention in the AI community. Quite a few techniques have been proposed. Among them, the Dempster-Shafer theory of evidence (DS theory) has been widely appreciated. In DS theory, Dempster's combination rule plays a major role. However, it has been pointed out that the application domains of the rule are rather limited and the application of the theory sometimes gives unexpected results. We have previously explored the problem with Dempster's combination rule and proposed an alternative combination mechanism in generalized incidence calculus. In this paper we give a comprehensive comparison between generalized incidence calculus and the Dempster-Shafer theory of evidence. We first prove that these two theories have the same ability in representing evidence and combining DS-independent evidence. We then show that the new approach can deal with some dependent situations while Dempster's combination rule cannot. Various examples in the paper show the ways of using generalized incidence calculus in expert systems.

Simulation of whole building coupled hygrothermal-airflow transfer in different climates

The coupled heat, air and moisture transfer between building envelopes and indoor air is complicated, and has a significant influence on the indoor environment and the energy performance of buildings. In the paper, a model for predicting coupled multi-zone hygrothermal-airflow transfer is presented. Both heat and moisture transfer in the building envelope and multi-zone indoor airflow are simultaneously considered; their interactions are modeled. The coupled system model is implemented into Matlab–Simulink, and is validated by using a series of testing tools and experiments. The new program is applied to investigate the moisture transfer effect on indoor air humidity and building energy consumption in different climates (hot-humid, temperate and hot-dry climates). The results show that not accounting for hygrothermal effects in modeling will result in overestimation of energy costs for hot and humid climate situations and possible over sizing of plant leading to inefficient operation.

How to estimate scavenger fish abundance using baited camera data

Baited cameras are often used for abundance estimation wherever alternative techniques are precluded, e.g. in abyssal systems and areas such as reefs. This method has thus far used models of the arrival process that are deterministic and, therefore, permit no estimate of precision.
Furthermore, errors due to multiple counting of fish and missing those not seen by the camera have restricted the technique to using only the time of first arrival, leaving a lot of data redundant. Here, we reformulate the arrival process using a stochastic model, which allows the precision of abundance
estimates to be quantified. Assuming a non-gregarious, cross-current-scavenging fish, we show that prediction of abundance from first arrival time is extremely uncertain. Using example data, we show
that simple regression-based prediction from the initial (rising) slope of numbers at the bait gives good precision, accepting certain assumptions. The most precise abundance estimates were obtained
by including the declining phase of the time series, using a simple model of departures, and taking account of scavengers beyond the camera’s view, using a hidden Markov model.

HTS Machines as Enabling Technology for All-Electric Airborne Vehicles

Environmental protection has now become paramount as evidence mounts to support the thesis of human activity-driven global warming. A global reduction of the emissions of pollutants into the atmosphere is therefore needed and new technologies have to be considered. A large part of the emissions come from transportation vehicles, including cars, trucks and airplanes, due to the nature of their combustion-based propulsion systems. Our team has been working for several years on the development of high power density superconducting motors for aircraft propulsion and fuel cell based power systems for aircraft. This paper investigates the feasibility of all-electric aircraft based on currently available technology. Electric propulsion would require the development of high power density electric propulsion motors, generators, power management and distribution systems. The requirements in terms of weight and volume of these components cannot be achieved with conventional technologies; however, the use of superconductors associated with hydrogen-based power plants makes possible the design of a reasonably light power system and would therefore enable the development of all-electric aero-vehicles. A system sizing has been performed both for actuators and for primary propulsion. Many advantages would come from electrical propulsion such as better controllability of the propulsion, higher efficiency, higher availability and less maintenance needs. Superconducting machines may very well be the enabling technology for all-electric aircraft development.