An architecture of multiple heterogeneous case-based reasoning employing agent technologies

This paper presents an investigation into applying Case-Based Reasoning to Multiple Heterogeneous Case Bases using agents. The adaptive CBR process and the architecture of the system are presented. A case study is presented to illustrate and evaluate the approach. The process of creating and maintaining the dynamic data structures is discussed. The similarity metrics employed by the system are used to support the process of optimisation of the collaboration between the agents which is based on the use of a blackboard architecture. The blackboard architecture is shown to support the efficient collaboration between the agents to achieve an efficient overall CBR solution, while using case-based reasoning methods to allow the overall system to adapt and “learn” new collaborative strategies for achieving the aims of the overall CBR problem solving process.

The FUELCON meta-architecture, in the landscape of intelligent technologies for refuelling

The conception of the FUELCON architecture, of a composite tool for the generation and validation of patterns for assigning fuel assemblies to the positions in the grid of a reactor core section, has undergone an evolution throughout the history of the project. Different options for various subtask were possible, envisioned, or actually explored or adopted. We project these successive, or even concomitant configurations of the architecture, into a meta-architecture, which quite not by chance happens to reflect basic choices in the field's history over the last decade.

Intelligent technologies for nuclear power systems: heuristic and neural tools

The consecutive, partly overlapping emergence of expert systems and then neural computation methods among intelligent technologies, is reflected in the evolving scene of their application to nuclear engineering. This paper provides a bird's eye view of the state of the application in the domain, along with a review of a particular task, the one perhaps economically more important: refueling design in nuclear power reactors.

Application of simulation technologies in the analysis of granular material behaviour during transport and storage

Problems in the preservation of the quality of granular material products are complex and arise from a series of sources during transport and storage. In either designing a new plant or, more likely, analysing problems that give rise to product quality degradation in existing operations, practical measurement and simulation tools and technologies are required to support the process engineer. These technologies are required to help in both identifying the source of such problems and then designing them out. As part of a major research programme on quality in particulate manufacturing computational models have been developed for segregation in silos, degradation in pneumatic conveyors, and the development of caking during storage, which use where possible, micro-mechanical relationships to characterize the behaviour of granular materials. The objective of the work presented here is to demonstrate the use of these computational models of unit processes involved in the analysis of large-scale processes involving the handling of granular materials. This paper presents a set of simulations of a complete large-scale granular materials handling operation, involving the discharge of the materials from a silo, its transport through a dilute-phase pneumatic conveyor, and the material storage in a big bag under varying environmental temperature and humidity conditions. Conclusions are drawn on the capability of the computational models to represent key granular processes, including particle size segregation, degradation, and moisture migration caking.

Innovations in learning and teaching approaches using game technologies - can "The Movies" teach how to make a movie?

The use of games technology in education is not a new phenomenon. Even back in the days of 286 processors, PCs were used in some schools along with (what looks like now) primitive simulation software to teach a range of different skills and techniques – from basic programming using Logo (the turtle style car with a pen at the back that could be used to draw on the floor – always a good way of attracting the attention of school kids!) up to quite sophisticated replications of physical problems, such as working out the trajectory of a missile to blow up an enemies’ tank. So why are games not more widely used in education (especially in FE and HE)? Can they help to support learners even at this advanced stage in their education? We aim to provide in this article an overview of the use of game technologies in education (almost as a small literature review for interested parties) and then go more in depth into one particular example we aim to introduce from this coming academic year (Sept. 2006) to help with teaching and assessment of one area of our Multimedia curriculum. Of course, we will not be able to fully provide the reader with data on how successful this is but we will be running a blog (http://themoviesineducation.blogspot.com/) to keep interested parties up to date with the progress of the project and to hopefully help others to set up similar solutions themselves. We will also only consider a small element of the implementation here and cover how the use of such assessment processes could be used in a broader context. The use of a game to aid learning and improve achievement is suggested because traditional methods of engagement are currently failing on some levels. By this it is meant that various parts of the production process we normally cover in our Multimedia degree are becoming difficult to monitor and continually assess.

Managing digital libraries using semantic web technologies

The aim of this work is to improve retrieval and navigation services on bibliographic data held in digital libraries. This paper presents the design and implementation of OntoBib¸ an ontology-based bibliographic database system that adopts ontology-driven search in its retrieval. The presented work exemplifies how a digital library of bibliographic data can be managed using Semantic Web technologies and how utilizing the domain specific knowledge improves both search efficiency and navigation of web information and document retrieval.

Impact of assembly process technologies on electronic packaging materials

Assembly processes used to bond components to printed circuit boards can have a significant impact on these boards and the final packaged component. Traditional approaches to bonding components to printed circuit boards results in heat being applied across the whole board assembly. This can lead to board warpage and possibly high residual stresses. Another approach discussed in this paper is to use Variable Frequency Microwave (VFM) heating to cure adhesives and underfills and bond components to printed circuit boards. In terms of energy considerations the use of VFM technology is much more cost effective compared to convection/radiation heating. This paper will discuss the impact of traditional reflow based processes on flexible substrates and it will demonstrate the possible advantages of using localised variable frequency microwave heating to cure materials in an electronic package.

Modelling technologies and applications

Numerical modelling technology and software is now being used to underwrite the design of many microelectronic and microsystems components. The demands for greater capability of these analysis tools are increasing dramatically, as the user community is faced with the challenge of producing reliable products in ever shorter lead times. This leads to the requirement for analysis tools to represent the interactions amongst the distinct phenomena and physics at multiple length and timescales. Multi-physics and Multi-scale technology is now becoming a reality with many code vendors. This chapter discusses the current status of modelling tools that assess the impact of nano-technology on the fabrication/packaging and testing of microsystems. The chapter is broken down into three sections: Modelling Technologies, Modelling Application to Fabrication, and Modelling Application to Assembly/Packing and Modelling Applied for Test and Metrology.

[Book review] Collaborative learning in mathematics

Review of: Collaborative Learning in Mathematics: A challenge to our beliefs and practices by Malcolm Swan, National Institute of Adult Continuing Education, paperback £24.95, ISBN 981-1-86201-311-7; hardback £44.95, ISBN 978-1-86201-316-2.

Advanced product development integration architecture: an out-of-box solution to support distributed production networks

This paper presents novel collaboration methods implemented using a centralized client/server product development integration architecture, and a decentralized peer-to-peer network for smaller and larger companies using open source solutions. The product development integration architecture has been developed for the integration of disparate technologies and software systems for the benefit of collaborative work teams in design and manufacturing. This will facilitate the communication of early design and product development within a distributed and collaborative environment. The novelty of this work is the introduction of an‘out-of-box’ concept which provides a standard framework and deploys this utilizing a proprietary state-of-the-art product lifecycle management system (PLM). The term ‘out-of-box’ means to modify the product development and business processes to suit the technologies rather than vice versa. The key business benefits of adopting such an approach are a rapidly reconfigurable network and minimal requirements for software customization to avoid systems instability

Bridging the gap with teamwork: collaborative leadership for communities of practice in the learning and skills sector

Collaborative approaches in leadership and management are increasingly acknowledged to play a key role in successful institutions in the learning and skills sector (LSS) (Ofsted, 2004). Such approaches may be important in bridging the potential 'distance' (psychological, cultural, interactional and geographical) (Collinson, 2005) that may exist between 'leaders' and 'followers', fostering more democratic communal solidarity. This paper reports on a 2006-07 research project funded by the Centre for Excellence in Leadership (CEL) that aimed to collect and analyse data on 'collaborative leadership' (CL) in the learning and skills sector. The project investigated collaborative leadership and its potential for benefiting staff through trust and knowledge-sharing in communities of practice (CoPs). The project forms part of longer-term educational research investigating leadership in a collaborative inquiry process (Jameson et al., 2006). The research examined the potential for CL to benefit institutions, analysing respondents' understanding of and resistance to collaborative practices. Quantitative and qualitative data from senior managers and lecturers was analysed using electronic data in SPSS and Tropes Zoom. The project aimed to recommend systems and practices for more inclusive, diverse leadership (Lumby et al., 2005). Collaborative leadership has increasingly gained international prominence as emphasis shifted towards team leadership beyond zero-sum 'leadership'/ 'followership' polarities into more mature conceptions of shared leadership spaces, within which synergistic leadership spaces can be mediated. The relevance of collaboration within the LSS has been highlighted following a spate of recent government-driven policy developments in FE. The promotion of CL addresses concerns about the apparent 'remoteness' of some senior managers, and the 'neo-management' control of professionals which can increase 'distance' between leaders and 'followers' and may de-professionalise staff in an already disempowered sector. Positive benefit from 'collaborative advantage' tends to be assumed in idealistic interpretations of CL, but potential 'collaborative inertia' may be problematic in a sector characterised by rapid top-down policy changes and continuous external audit and surveillance. Constant pressure for achievement against goals leaves little time for democratic group negotiations, despite the desires of leaders to create a more collaborative ethos. Yet prior models of intentional communities of practice potentially offer promise for CL practice to improve group performance despite multiple constraints. The CAMEL CoP model (JISC infoNet, 2006) was linked to the project, providing one practical way of implementing CL within situated professional networks.The project found that a good understanding of CL was demonstrated by most respondents, who thought it could enable staff to share power and work in partnership to build trust and conjoin skills, abilities and experience to achieve common goals for the good of the sector. However, although most respondents expressed agreement with the concept and ideals of CL, many thought this was currently an idealistically democratic, unachievable pipe dream in the LSS. Many respondents expressed concerns with the 'audit culture' and authoritarian management structures in FE. While there was a strong desire to see greater levels of implementation of CL, and 'collaborative advantage' from the 'knowledge sharing benefit potential' of team leadership, respondents also strongly advised against the pitfalls of 'collaborative inertia'. A 'distance' between senior leadership views and those of staff lower down the hierarchy regarding aspects of leadership performance in the sector was reported. Finally, the project found that more research is needed to investigate CL and develop innovative methods of practical implementation within autonomous communities of professional practice.

The eLIDA CAMEL nomadic model of collaborative partnership for a community of practice in design for learning

A nomadic collaborative partnership model for a community of practice (CoP) in Design for Learning (D4L) can facilitate successful innovation and continuing appraisals of effective professional practice, stimulated by a 'critical friend' assigned to the project. This paper reports on e-learning case studies collected by the JISC-funded UK eLIDA CAMEL Design for Learning Project. The project implemented and evaluated learning design (LD) tools in higher and further education within the JISC Design for Learning pedagogic programme (2006-07). Project partners trialled professional user evaluations of innovative e-learning tools with learning design function, collecting D4L case studies and LD sequences in post-16/HE contexts using LAMS and Moodle. The project brought together learning activity sequences within a collaborative e-learning community of practice based on the CAMEL (Collaborative Approaches to the Management of e-Learning) model, contributing to international D4L developments. This paper provides an overview of project outputs in e-learning innovations, including evaluations from teachers and students. The paper explores intentionality in the development of a CoP in design for learning, reporting on trials of LD and social software that bridged tensions between formalised intra-institutional e-learning relationships and inter-institutional professional project team dynamic D4L practitioner interactions. Following a brief report of D4L case studies and feedback, the catalytic role of the 'critical friend' is highlighted and recommended as a key ingredient in the successful development of a nomadic model of communities of practice for managing professional e-learning projects. eLIDA CAMEL Partners included the Association of Learning Technology (ALT), JISC infoNet, three universities and five FE/Sixth Form Colleges. Results reported to JISC demonstrated D4L e-learning innovations by practitioners, illuminated by the role of the 'critical friend'. The project also benefited from formal case study evaluations and the leading work of ALT and JISC infoNet in the development of the CAMEL model.