Industrial water pollution in Dhaka, Bangladesh: strategies and incentives for pollution control in small and medium enterprises

The extent and gravity of the environmental degradation of the water resources in Dhaka due to untreated industrial waste is not fully recognised in international discourse. Pollution levels affect vast numbers, but the poor and the vulnerable are the worst affected. For example, rice productivity, the mainstay of poor farmers, in the Dhaka watershed has declined by 40% over a period of ten years. The study found significant correlations between water pollution and diseases such as jaundice, diarrhoea and skin problems. It was reported that the cost of treatment of one episode of skin disease could be as high as 29% of the weekly earnings of some of the poorest households. The dominant approach to deal with pollution in the SMEs is technocratic. Given the magnitude of the problem this paper argues that to control industrial pollution by SMEs and to enhance their compliance it is necessary to move from the technocratic approach to one which can also address the wider institutional and attitudinal issues. Underlying this shift is the need to adopt the appropriate methodology. The multi-stakeholder analysis enables an understanding of the actors, their influence, their capacity to participate in, or oppose change, and the existing and embedded incentive structures which allow them to pursue interests which are generally detrimental to environmental good. This enabled core and supporting strategies to be developed around three types of actors in industrial pollution, i.e., (i) principal actors, who directly contribute to industrial pollution; (ii) stakeholders who exacerbate the situation; and (iii) potential actors in mitigation. Within a carrot-and-stick framework, the strategies aim to improve environmental governance and transparency, set up a packet to incentive for industry and increase public awareness.

Socialising young literacy learners into a discourse of failure: Dominant discourses in literacy teaching and assessment and their impact on the progression of young literacy learners into employment

This paper argues that contemporary literacy programmes are a mismatch for the expectations of both the government and employers as well as the goals of learners. It submits that the dominant discourses in literacy provision have led to the emergence of a learning culture which not only fails the learners but is also incapable of meeting the aspirations of both the government and employers. To support this argument, the paper reports a small scale research project that analyses the perceptions of learners, teachers and employers who were involved in a work placement scheme for young literacy learners in a college of further education. Data for the study were collected through focus group and face to face interviews and analysed using the framework of discourse analysis provided by Gill (2000) with findings codified and analysed thematically. The study found that teachers were aware that their learners were not adequately prepared for the world of work because of the demands of the dominant discourses of quality and performance measurement which were most obviously manifested in their assessment, teaching methods and the attitudes of learners. It found that employers perceive young learners as inadequate in terms of the workplace expectations. Learners in the study revealed that their workplace culture and expectations were totally different from the culture to which they had been socialised in their studies. The study concludes that unless the dominance of these discourses is ameliorated, young literacy learners will continue to be socialised into a discourse of failure.

Production of lightweight aggregate from industrial waste and carbon dioxide

The concomitant recycling of waste and carbon dioxide emissions is the subject of developing technology designed to close the industrial process loop and facilitate the bulk-re-use of waste in, for example, construction. The present work discusses a treatment step that employs accelerated carbonation to convert gaseous carbon dioxide into solid calcium carbonate through a reaction with industrial thermal residues. Treatment by accelerated carbonation enabled a synthetic aggregate to be made from thermal residues and waste quarry fines. The aggregates produced had a bulk density below 1000 kg/m3 and a high water absorption capacity. Aggregate crushing strengths were between 30% and 90% stronger than the proprietary lightweight expanded clay aggregate available in the UK. Cast concrete blocks containing the carbonated aggregate achieve compressive strengths of 24 MPa, making them suitable for use with concrete exposed to non-aggressive service environments. The energy intensive firing and sintering processes traditionally required to produce lightweight aggregates can now be augmented by a cold-bonding, low energy method that contributes to the reduction of green house gases to the atmosphere.

Accelerated carbonation treatment of industrial wastes

The disposal of industrial waste presents major logistical, financial and environmental issues. Technologies that can reduce the hazardous properties of wastes are urgently required. In the present work, a number of industrial wastes arising from the cement, metallurgical, paper, waste disposal and energy industries were treated with accelerated carbonation. In this process carbonation was effected by exposing the waste to pure carbon dioxide gas. The paper and cement wastes chemically combined with up to 25% by weight of gas. The reactivity of the wastes to carbon dioxide was controlled by their constituent minerals, and not by their elemental composition, as previously postulated. Similarly, microstructural alteration upon carbonation was primarily influenced by mineralogy. Many of the thermal wastes tested were classified as hazardous, based upon regulated metal content and pH. Treatment by accelerated carbonation reduced the leaching of certain metals, aiding the disposal of many as stable non-reactive wastes. Significant volumes of carbon dioxide were sequestrated into the accelerated carbonated treated wastes.

Can effective teaching and learning strategies help student nurses to retain drug calculation skills?

Student nurses need to develop and retain drug calculation skills in order accurately to calculate drug dosages in clinical practice. If student nurses are to qualify and be fit to practise accurate drug calculation skills, then educational strategies need to not only show that the skills of student nurses have improved but that these skills have been retained over a period of time. A quasi-experimental approach was used to test the effectiveness of a range of strategies in improving retention of drug calculation skills. The results from an IV additive drug calculation test were used to compare the drug calculation skills of student nurses between two groups of students who had received different approaches to teaching drug calculation skills. The sample group received specific teaching and learning strategies in relation to drug calculation skills and the second group received only lectures on drug calculation skills. All test results for students were anonymous. The results from the test for both groups were statistically analysed using the Mann Whitney test to ascertain whether the range of strategies improved the results for the IV additive test. The results were further analysed and compared to ascertain the types and numbers of errors made in each of the sample groups. The results showed that there is a highly significant difference between the two samples using a two-tailed test (U=39.5, p<0.001). The strategies implemented therefore did make a difference to the retention of drug calculation skills in the students in the intervention group. Further research is required into the retention of drug calculation skills by students and nurses, but there does appears to be evidence to suggest that sound teaching and learning strategies do result in better retention of drug calculation skills.

An industrial implementation of a methodology for the optimisation of product design tolerances

Today, the key to commercial success in manufacturing is the timely development of new products that are not only functionally fit for purpose but offer high performance and quality throughout their entire lifecycle. In principle, this demands the introduction of a fully developed and optimised product from the outset. To accomplish this, manufacturing companies must leverage existing knowledge in their current technical, manufacturing and service capabilities. This is especially true in the field of tolerance selection and application, the subject area of this research. Tolerance knowledge must be readily available and deployed as an integral part of the product development process. This paper describes a methodology and framework,currently under development in a UK manufacturer, to achieve this objective.

‘Nothing will prevent me from doing a good job’. The professionalisation of part-time teaching staff in further and adult education

Approximately 85,000 part-time teaching staff working in further education (FE) and adult and community learning (ACL) are often seen as ‘a problem’. The intrinsic ‘part-timeness’ of these staff tends to marginalise them: they remain under-recognised and largely unsupported. Yet this picture is over-simplified. This article examines how part-time staff make creative use of professional autonomy and agency to mitigate problematic ‘casual employment’ conditions, reporting on results from Learning and Skills Development Agency-sponsored research (2002–2006) with 700 part-time staff in the learning and skills sector. The question of agency was reported as a key factor in part-time employment. Change is necessary for the professional agency of part-timers to be harnessed as the sector responds to ambitious sectoral ‘improvement’ agendas following the Foster Report and FE White Paper. Enhanced professionalisation for part-time staff needs greater recognition and inclusion in change agendas.

Creative environments for art, craft & design teaching in the 21st century

This booklet has been designed for student teachers in particular and those in their early years as teachers of art, craft and design. It is suitable however for all teachers of art and design, and will be useful when considering the 2007 review of the Art and Design programme of study (POS) with its focus on creativity and ideas developments. The contents are intended as prompts or guides and ideas for initiating individual responses to themes or projects and a "way in" for the teacher when guiding pupils. It explains in detail how one might inspire all groups with appropriate and varied resources.