Average-case analysis of power consumption in embedded systems

Power efficiency is one of the most important constraints in the design of embedded systems since such systems are generally driven by batteries with limited energy budget or restricted power supply. In every embedded system, there are one or more processor cores to run the software and interact with the other hardware components of the system. The power consumption of the processor core(s) has an important impact on the total power dissipated in the system. Hence, the processor power optimization is crucial in satisfying the power consumption constraints, and developing low-power embedded systems. A key aspect of research in processor power optimization and management is “power estimation”. Having a fast and accurate method for processor power estimation at design time helps the designer to explore a large space of design possibilities, to make the optimal choices for developing a power efficient processor. Likewise, understanding the processor power dissipation behaviour of a specific software/application is the key for choosing appropriate algorithms in order to write power efficient software. Simulation-based methods for measuring the processor power achieve very high accuracy, but are available only late in the design process, and are often quite slow. Therefore, the need has arisen for faster, higher-level power prediction methods that allow the system designer to explore many alternatives for developing powerefficient hardware and software. The aim of this thesis is to present fast and high-level power models for the prediction of processor power consumption. Power predictability in this work is achieved in two ways: first, using a design method to develop power predictable circuits; second, analysing the power of the functions in the code which repeat during execution, then building the power model based on average number of repetitions. In the first case, a design method called Asynchronous Charge Sharing Logic (ACSL) is used to implement the Arithmetic Logic Unit (ALU) for the 8051 microcontroller. The ACSL circuits are power predictable due to the independency of their power consumption to the input data. Based on this property, a fast prediction method is presented to estimate the power of ALU by analysing the software program, and extracting the number of ALU-related instructions. This method achieves less than 1% error in power estimation and more than 100 times speedup in comparison to conventional simulation-based methods. In the second case, an average-case processor energy model is developed for the Insertion sort algorithm based on the number of comparisons that take place in the execution of the algorithm. The average number of comparisons is calculated using a high level methodology called MOdular Quantitative Analysis (MOQA). The parameters of the energy model are measured for the LEON3 processor core, but the model is general and can be used for any processor. The model has been validated through the power measurement experiments, and offers high accuracy and orders of magnitude speedup over the simulation-based method.

The Irish House of Lords, 1780-1800: politics and ideology

This thesis covers the Irish House of Lords in the last two decades of its life. A number of important themes run through the work - the regency crisis, patronage, the management of the Lords, the relationship between the Lords and Commons. These themes, explored from different angles, are vital to an understanding of the political role of the upper house in the 1780s and 1790s. This study is confined to the Lords as a political institution and thus its judicial role as final court of appeal, which was restored to it in 1782, will not be explored here. The thesis consists of two parts. Part one examines the structure and powers of the House of Lords while part two looks at the parties and policies of the house. Chapter one discusses the British constitution as imposed upon Ireland. Chapter two suggests the reasons why constitutional changes were introduced in 1782, and looks at the contribution made by the Irish House of Lords in securing these changes. Chapter three explores the various channels of influence which the peers enjoyed. Chapter four explores the sometimes tense relationship between Lords and Commons. Chapter five examines management of the House of Lords by Dublin Castle. Part two, begins at chapter six. This chapter explores the leadership of both parties within the Lords. Chapter seven looks at how patronage was used to reward those who were loyal to the government. Chapter eight explores the influence of the Whig opposition. Chapter nine looks at the controversial attempts made by Pitt and his ministry during the 1790s to win the support of catholics and turn them from the lure of French ideas, and of the response of the peers to these attempts. Chapter ten is concerned with the relationship between the peers of the House of Lords and the lords lieutenant during the 1790s. Chapter eleven looks at the Union and the House of Lords and attempts to answer the question historians have long asked: why did the Irish parliament and the House of Lords in particular, look favourably on the proposed union of the two kingdoms and the end of their own institution? The House of Lords in the closing decades of the eighteenth century was an institution within which the wealth and power of the kingdom could be found. Its members were politically active, both inside and outside the house. It contained a majority who saw the Crown as the source of stability, but it was a living and evolving political organism and therefore it contained men who believed that the Crown should have its influence limited. This evolution is also demonstrated in its desire for political change in 1782 and 1788. Its last, and perhaps most radical decision, was to vote for its own demise in 1900.

Low power predictable memory and processing architectures

Great demand in power optimized devices shows promising economic potential and draws lots of attention in industry and research area. Due to the continuously shrinking CMOS process, not only dynamic power but also static power has emerged as a big concern in power reduction. Other than power optimization, average-case power estimation is quite significant for power budget allocation but also challenging in terms of time and effort. In this thesis, we will introduce a methodology to support modular quantitative analysis in order to estimate average power of circuits, on the basis of two concepts named Random Bag Preserving and Linear Compositionality. It can shorten simulation time and sustain high accuracy, resulting in increasing the feasibility of power estimation of big systems. For power saving, firstly, we take advantages of the low power characteristic of adiabatic logic and asynchronous logic to achieve ultra-low dynamic and static power. We will propose two memory cells, which could run in adiabatic and non-adiabatic mode. About 90% dynamic power can be saved in adiabatic mode when compared to other up-to-date designs. About 90% leakage power is saved. Secondly, a novel logic, named Asynchronous Charge Sharing Logic (ACSL), will be introduced. The realization of completion detection is simplified considerably. Not just the power reduction improvement, ACSL brings another promising feature in average power estimation called data-independency where this characteristic would make power estimation effortless and be meaningful for modular quantitative average case analysis. Finally, a new asynchronous Arithmetic Logic Unit (ALU) with a ripple carry adder implemented using the logically reversible/bidirectional characteristic exhibiting ultra-low power dissipation with sub-threshold region operating point will be presented. The proposed adder is able to operate multi-functionally.

Infected vision in the works of Thomas Middleton

This thesis investigates the extent and range of the ocular vocabulary and themes employed by the playwright Thomas Middleton in context with early modern scientific, medical, and moral-philosophical writing on vision. More specifically, this thesis concerns Middleton’s revelation of the substance or essence of outward forms through mimesis. This paradoxical stance implies Middleton’s use of an illusory (theatrical) art form to explore hidden truths. This can be related to the early modern belief in the imagination (or fantasy) as chief mediator between the corporeal and spiritual worlds as well as to a reformed belief in the power of signs to indicate divine truth. This thesis identifies striking parallels between Middleton’s policy of social diagnosis and cure and an increased preoccupation with knowledge of interior man which culminates in Robert Burton’s Anatomy of Melancholy of 1621. All of these texts seek a cure for diseased internal sense faculties (such as fantasy and will) which cause the raging passions to destroy the individual. The purpose of this thesis is to demonstrate how Middleton takes a similar ‘mental-medicinal’ approach which investigates the idols created by the imagination before ‘purging’ the same and restoring order (Corneanu and Vermeir 184). The idea of infection incurred through the eyes which are fixed on vice (or error) has moral, religious, and political implications and discovery of corruption involves stripping away the illusions of false appearances to reveal the truth within whereby disease and disorder can be cured and restored. Finally, Middleton’s use of theatrical fantasy to detect the idols of the diseased imagination can be read as a Paracelsian, rather than Galenic, form of medicine whereby like is ‘joined with their like’ (Bostocke C7r) to restore health.

Inclusive education policy, the general allocation model and dilemmas of practice in primary schools

Background: Inclusive education is central to contemporary discourse internationally reflecting societies’ wider commitment to social inclusion. Education has witnessed transforming approaches that have created differing distributions of power, resource allocation and accountability. Multiple actors are being forced to consider changes to how key services and supports are organised. This research constitutes a case study situated within this broader social service dilemma of how to distribute finite resources equitably to meet individual need, while advancing inclusion. It focuses on the national directive with regard to inclusive educational practice for primary schools, Department of Education and Science Special Education Circular 02/05, which introduced the General Allocation Model (GAM) within the legislative context of the Education of Persons with Special Educational Needs (EPSEN) Act (Government of Ireland, 2004). This research could help to inform policy with ‘facts about what is happening on the ground’ (Quinn, 2013). Research Aims: The research set out to unearth the assumptions and definitions embedded within the policy document, to analyse how those who are at the coalface of policy, and who interface with multiple interests in primary schools, understand the GAM and respond to it, and to investigate its effects on students and their education. It examines student outcomes in the primary schools where the GAM was investigated. Methods and Sample The post-structural study acknowledges the importance of policy analysis which explicitly links the ‘bigger worlds’ of global and national policy contexts to the ‘smaller worlds’ of policies and practices within schools and classrooms. This study insists upon taking the detail seriously (Ozga, 1990). A mixed methods approach to data collection and analysis is applied. In order to secure the perspectives of key stakeholders, semi-structured interviews were conducted with primary school principals, class teachers and learning support/resource teachers (n=14) in three distinct mainstream, non-DEIS schools. Data from the schools and their environs provided a profile of students. The researcher then used the Pobal Maps Facility (available at www.pobal.ie) to identify the Small Area (SA) in which each student resides, and to assign values to each address based on the Pobal HP Deprivation Index (Haase and Pratschke, 2012). Analysis of the datasets, guided by the conceptual framework of the policy cycle (Ball, 1994), revealed a number of significant themes. Results: Data illustrate that the main model to support student need is withdrawal from the classroom under policy that espouses inclusion. Quantitative data, in particular, highlighted an association between segregated practice and lower socioeconomic status (LSES) backgrounds of students. Up to 83% of the students in special education programmes are from lower socio-economic status (LSES) backgrounds. In some schools 94% of students from LSES backgrounds are withdrawn from classrooms daily for special education. While the internal processes of schooling are not solely to blame for class inequalities, this study reveals the power of professionals to order children in school, which has implications for segregated special education practice. Such agency on the part of key actors in the context of practice relates to ‘local constructions of dis/ability’, which is influenced by teacher habitus (Bourdieu, 1984). The researcher contends that inclusive education has not resulted in positive outcomes for students from LSES backgrounds because it is built on faulty assumptions that focus on a psycho-medical perspective of dis/ability, that is, placement decisions do not consider the intersectionality of dis/ability with class or culture. This study argues that the student need for support is better understood as ‘home/school discontinuity’ not ‘disability’. Moreover, the study unearths the power of some parents to use social and cultural capital to ensure eligibility to enhanced resources. Therefore, a hierarchical system has developed in mainstream schools as a result of funding models to support need in inclusive settings. Furthermore, all schools in the study are ‘ordinary’ schools yet participants acknowledged that some schools are more ‘advantaged’, which may suggest that ‘ordinary’ schools serve to ‘bury class’ (Reay, 2010) as a key marker in allocating resources. The research suggests that general allocation models of funding to meet the needs of students demands a systematic approach grounded in reallocating funds from where they have less benefit to where they have more. The calculation of the composite Haase Value in respect of the student cohort in receipt of special education support adopted for this study could be usefully applied at a national level to ensure that the greatest level of support is targeted at greatest need. Conclusion: In summary, the study reveals that existing structures constrain and enable agents, whose interactions produce intended and unintended consequences. The study suggests that policy should be viewed as a continuous and evolving cycle (Ball, 1994) where actors in each of the social contexts have a shared responsibility in the evolution of education that is equitable, excellent and inclusive.

Exploiting the bioactive potential of marine sponge microbiota

Endospore-forming bacteria are often isolated from different marine sponges, but their abundance varies, and they are frequently missed by culture-independent studies. Within endospore-formers, Bacillus are renowned for the production of antimicrobials and other compounds of medical and industrial importance. Although this group has been well studied in many different environments, very little is known about the actual diversity and properties of sporeformers associated with marine sponges. Identification of the endospore-forming bacteria associated with the marine sponges; Haliclona simulans, Amphilectus fucorum and Cliona celata, has uncovered an abundant and diverse microbial population composed of Bacillus, Paenibacillus, Solibacillus, Halobacillus and Viridibacillus species. This diversity appears to be overlooked by other non-targeted approaches where spore-formers are masked by more dominant species within the ecosystem. In addition to the identification of two antibiotic resistant plasmids, this bank of sporeformers produce a range of bioactive compounds. New antimicrobial compounds are urgently needed to combat the spread of multidrug resistant pathogens, as few new options are entering the drug discovery pipelines for clinical trials. Based on the results of this project, endospore-formers associated with marine sponges may hold the answer. The power of coupling functional based assays with genomic approaches has enabled us to identify a novel class 1 lantibiotic, subtilomycin, which is active against several clinically relevant pathogens. Subtilomycin is encoded in the genomes of all the marine sponge B. subtilis isolates analysed. They cluster together phylogenetically and form a distinct group from other sequenced B. subtilis strains. Regardless of its potential clinical relevance, subtilomycin may be providing these strains with a specific competitive advantage(s) within the stringent confines of the marine sponge environment. This work has outlined the industrial and biotechnological potential of marine sponge endospore-formers which appear to produce a cocktail of bioactive compounds. Genome sequencing of specific marine sponge isolates highlighted the importance of mining extreme environments and habitats for new lead compounds with potential therapeutic applications.

Analysis and optimisation of semiconductor reflective modulators for optical networks

Reflective modulators based on the combination of an electroabsorption modulator (EAM) and semiconductor optical amplifier (SOA) are attractive devices for applications in long reach carrier distributed passive optical networks (PONs) due to the gain provided by the SOA and the high speed and low chirp modulation of the EAM. Integrated R-EAM-SOAs have experimentally shown two unexpected and unintuitive characteristics which are not observed in a single pass transmission SOA: the clamping of the output power of the device around a maximum value and low patterning distortion despite the SOA being in a regime of gain saturation. In this thesis a detailed analysis is carried out using both experimental measurements and modelling in order to understand these phenomena. For the first time it is shown that both the internal loss between SOA and R-EAM and the SOA gain play an integral role in the behaviour of gain saturated R-EAM-SOAs. Internal loss and SOA gain are also optimised for use in a carrier distributed PONs in order to access both the positive effect of output power clamping, and hence upstream dynamic range reduction, combined with low patterning operation of the SOA Reflective concepts are also gaining interest for metro transport networks and short reach, high bit rate, inter-datacentre links. Moving the optical carrier generation away from the transmitter also has potential advantages for these applications as it avoids the need for cooled photonics being placed directly on hot router line-cards. A detailed analysis is carried out in this thesis on a novel colourless reflective duobinary modulator, which would enable wavelength flexibility in a power-efficient reflective metro node.

Beyond simple imaging with energetic beams – nanopatterning, correlative microscopy and statistical analysis of inclusions

Electron microscopy (EM) has advanced in an exponential way since the first transmission electron microscope (TEM) was built in the 1930’s. The urge to ‘see’ things is an essential part of human nature (talk of ‘seeing is believing’) and apart from scanning tunnel microscopes which give information about the surface, EM is the only imaging technology capable of really visualising atomic structures in depth down to single atoms. With the development of nanotechnology the demand to image and analyse small things has become even greater and electron microscopes have found their way from highly delicate and sophisticated research grade instruments to key-turn and even bench-top instruments for everyday use in every materials research lab on the planet. The semiconductor industry is as dependent on the use of EM as life sciences and pharmaceutical industry. With this generalisation of use for imaging, the need to deploy advanced uses of EM has become more and more apparent. The combination of several coinciding beams (electron, ion and even light) to create DualBeam or TripleBeam instruments for instance enhances the usefulness from pure imaging to manipulating on the nanoscale. And when it comes to the analytic power of EM with the many ways the highly energetic electrons and ions interact with the matter in the specimen there is a plethora of niches which evolved during the last two decades, specialising in every kind of analysis that can be thought of and combined with EM. In the course of this study the emphasis was placed on the application of these advanced analytical EM techniques in the context of multiscale and multimodal microscopy – multiscale meaning across length scales from micrometres or larger to nanometres, multimodal meaning numerous techniques applied to the same sample volume in a correlative manner. In order to demonstrate the breadth and potential of the multiscale and multimodal concept an integration of it was attempted in two areas: I) Biocompatible materials using polycrystalline stainless steel and II) Semiconductors using thin multiferroic films. I) The motivation to use stainless steel (316L medical grade) comes from the potential modulation of endothelial cell growth which can have a big impact on the improvement of cardio-vascular stents – which are mainly made of 316L – through nano-texturing of the stent surface by focused ion beam (FIB) lithography. Patterning with FIB has never been reported before in connection with stents and cell growth and in order to gain a better understanding of the beam-substrate interaction during patterning a correlative microscopy approach was used to illuminate the patterning process from many possible angles. Electron backscattering diffraction (EBSD) was used to analyse the crystallographic structure, FIB was used for the patterning and simultaneously visualising the crystal structure as part of the monitoring process, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were employed to analyse the topography and the final step being 3D visualisation through serial FIB/SEM sectioning. II) The motivation for the use of thin multiferroic films stems from the ever-growing demand for increased data storage at lesser and lesser energy consumption. The Aurivillius phase material used in this study has a high potential in this area. Yet it is necessary to show clearly that the film is really multiferroic and no second phase inclusions are present even at very low concentrations – ~0.1vol% could already be problematic. Thus, in this study a technique was developed to analyse ultra-low density inclusions in thin multiferroic films down to concentrations of 0.01%. The goal achieved was a complete structural and compositional analysis of the films which required identification of second phase inclusions (through elemental analysis EDX(Energy Dispersive X-ray)), localise them (employing 72 hour EDX mapping in the SEM), isolate them for the TEM (using FIB) and give an upper confidence limit of 99.5% to the influence of the inclusions on the magnetic behaviour of the main phase (statistical analysis).