Evaporation maps for ternary non-ideal liquid mixtures

This thesis deals with the evaporation of non-ideal liquid mixtures using a multicomponent mass transfer approach. It develops the concept of evaporation maps as a convenient way of representing the dynamic composition changes of ternary mixtures during an evaporation process. Evaporation maps represent the residual composition of evaporating ternary non-ideal mixtures over the full range of composition, and are analogous to the commonly-used residue curve maps of simple distillation processes. The evaporation process initially considered in this work involves gas-phase limited evaporation from a liquid or wetted-solid surface, over which a gas flows at known conditions. Evaporation may occur into a pure inert gas, or into one pre-loaded with a known fraction of one of the ternary components. To explore multicomponent masstransfer effects, a model is developed that uses an exact solution to the Maxwell-Stefan equations for mass transfer in the gas film, with a lumped approach applied to the liquid phase. Solutions to the evaporation model take the form of trajectories in temperaturecomposition space, which are then projected onto a ternary diagram to form the map. Novel algorithms are developed for computation of pseudo-azeotropes in the evaporating mixture, and for calculation of the multicomponent wet-bulb temperature at a given liquid composition. A numerical continuation method is used to track the bifurcations which occur in the evaporation maps, where the composition of one component of the pre-loaded gas is the bifurcation parameter. The bifurcation diagrams can in principle be used to determine the required gas composition to produce a specific terminal composition in the liquid. A simple homotopy method is developed to track the locations of the various possible pseudo-azeotropes in the mixture. The stability of pseudo-azeotropes in the gas-phase limited case is examined using a linearized analysis of the governing equations. Algorithms for the calculation of separation boundaries in the evaporation maps are developed using an optimization-based method, as well as a method employing eigenvectors derived from the linearized analysis. The flexure of the wet-bulb temperature surface is explored, and it is shown how evaporation trajectories cross ridges and valleys, so that ridges and valleys of the surface do not coincide with separation boundaries. Finally, the assumption of gas-phase limited mass transfer is relaxed, by employing a model that includes diffusion in the liquid phase. A finite-volume method is used to solve the system of partial differential equations that results. The evaporation trajectories for the distributed model reduce to those of the lumped (gas-phase limited) model as the diffusivity in the liquid increases; under the same gas-phase conditions the permissible terminal compositions of the distributed and lumped models are the same.

Non-equilibrium induction of tin in germanium: towards direct bandgap Ge1-xSnx nanowires

The development of non-equilibrium group IV nanoscale alloys is critical to achieving new functionalities, such as the formation of a direct bandgap in a conventional indirect bandgap elemental semiconductor. Here, we describe the fabrication of uniform diameter, direct bandgap Ge1-xSnx alloy nanowires, with a Sn incorporation up to 9.2[thinsp]at.%, far in excess of the equilibrium solubility of Sn in bulk Ge, through a conventional catalytic bottom-up growth paradigm using noble metal and metal alloy catalysts. Metal alloy catalysts permitted a greater inclusion of Sn in Ge nanowires compared with conventional Au catalysts, when used during vapour-liquid-solid growth. The addition of an annealing step close to the Ge-Sn eutectic temperature (230[thinsp][deg]C) during cool-down, further facilitated the excessive dissolution of Sn in the nanowires. Sn was distributed throughout the Ge nanowire lattice with no metallic Sn segregation or precipitation at the surface or within the bulk of the nanowires. The non-equilibrium incorporation of Sn into the Ge nanowires can be understood in terms of a kinetic trapping model for impurity incorporation at the triple-phase boundary during growth.

Enabling effective operational decision making on a Combined Heat and Power System using the 5C architecture

The use of Cyber Physical Systems (CPS) to optimise industrial energy systems is an approach which has the potential to positively impact on manufacturing sector energy efficiency. The need to obtain data to facilitate the implementation of a CPS in an industrial energy system is however a complex task which is often implemented in a non-standardised way. The use of the 5C CPS architecture has the potential to standardise this approach. This paper describes a case study where data from a Combined Heat and Power (CHP) system located in a large manufacturing company was fused with grid electricity and gas models as well as a maintenance cost model using the 5C architecture with a view to making effective decisions on its cost efficient operation. A control change implemented based on the cognitive analysis enabled via the 5C architecture implementation has resulted in energy cost savings of over €7400 over a four-month period, with energy cost savings of over €150,000 projected once the 5C architecture is extended into the production environment.

Effect of investigation intensity and treatment differences on prostate cancer survivor's physical symptoms, psychological well-being and health-related quality of life: a two country cross-sectional study.

Aim: To investigate effects on men's health and well-being of higher prostate cancer (PCa) investigation and treatment levels in similar populations. Participants: PCa survivors in Ireland where the Republic of Ireland (RoI) has a 50% higher PCa incidence than Northern Ireland (NI). Method: A cross-sectional postal questionnaire was sent to PCa survivors 2–18 years post-treatment, seeking information about current physical effects of treatment, health-related quality of life (HRQoL; EORTC QLQ-C30; EQ-5D-5L) and psychological well-being (21 question version of the Depression, Anxiety and Stress Scale, DASS-21). Outcomes in RoI and NI survivors were compared, stratifying into ‘late disease’ (stage III/IV and any Gleason grade (GG) at diagnosis) and ‘early disease’ (stage I/II and GG 2–7). Responses were weighted by age, jurisdiction and time since diagnosis. Between-country differences were investigated using multivariate logistic and linear regression. Results: 3348 men responded (RoI n=2567; NI n=781; reflecting population sizes, response rate 54%). RoI responders were younger; less often had comorbidities (45% vs 38%); were more likely to present asymptomatically (66%; 41%) or with early disease (56%; 35%); and less often currently used androgen deprivation therapy (ADT; 2%; 28%). Current prevalence of incontinence (16%) and impotence (56% early disease, 67% late disease) did not differ between RoI and NI. In early disease, only current bowel problems (RoI 12%; NI 21%) differed significantly in multivariate analysis. In late disease, NI men reported significantly higher levels of gynaecomastia (23% vs 9%) and hot flashes(41% vs 19%), but when ADT users were analysed separately, differences disappeared. For HRQoL, in multivariate analysis, only pain (early disease: RoI 11.1, NI 19.4) and financial difficulties (late disease: RoI 10.4, NI 7.9) differed significantly between countries. There were no significant between-country differences in DASS-21 or index ED-5D-5L score. Conclusions: Treatment side effects were commonly reported and increased PCa detection in RoI has left more men with these side effects. We recommended that men be offered a PSA test only after informed discussion.