Optimisation of granola breakfast cereal manufacturing process by wet granulation and pneumatic conveying

This study has considered the optimisation of granola breakfast cereal manufacturing processes by wet granulation and pneumatic conveying. Granola is an aggregated food product used as a breakfast cereal and in cereal bars. Processing of granola involves mixing the dry ingredients (typically oats, nuts, etc.) followed by the addition of a binder which can contain honey, water and/or oil. In this work, the design and operation of two parallel wet granulation processes to produce aggregate granola products were incorporated: a) a high shear mixing granulation process followed by drying/toasting in an oven. b) a continuous fluidised bed followed by drying/toasting in an oven. In high shear granulation the influence of process parameters on key granule aggregate quality attributes such as granule size distribution and textural properties of granola were investigated. The experimental results show that the impeller rotational speed is the single most important process parameter which influences granola physical and textural properties. After that binder addition rate and wet massing time also show significant impacts on granule properties. Increasing the impeller speed and wet massing time increases the median granule size while also presenting a positive correlation with density. The combination of high impeller speed and low binder addition rate resulted in granules with the highest levels of hardness and crispness. In the fluidised bed granulation process the effect of nozzle air pressure and binder spray rate on key aggregate quality attributes were studied. The experimental results show that a decrease in nozzle air pressure leads to larger in mean granule size. The combination of lowest nozzle air pressure and lowest binder spray rate results in granules with the highest levels of hardness and crispness. Overall, the high shear granulation process led to larger, denser, less porous and stronger (less likely to break) aggregates than the fluidised bed process. The study also examined the particle breakage of granola during pneumatic conveying produced by both the high shear granulation and the fluidised bed granulation process. Products were pneumatically conveyed in a purpose built conveying rig designed to mimic product conveying and packaging. Three different conveying rig configurations were employed; a straight pipe, a rig consisting two 45° bends and one with 90° bend. Particle breakage increases with applied pressure drop, and a 90° bend pipe results in more attrition for all conveying velocities relative to other pipe geometry. Additionally for the granules produced in the high shear granulator; those produced at the highest impeller speed, while being the largest also have the lowest levels of proportional breakage while smaller granules produced at the lowest impeller speed have the highest levels of breakage. This effect clearly shows the importance of shear history (during granule production) on breakage during subsequent processing. In terms of the fluidised bed granulation, there was no single operating parameter that was deemed to have a significant effect on breakage during subsequent conveying. Finally, a simple power law breakage model based on process input parameters was developed for both manufacturing processes. It was found suitable for predicting the breakage of granola breakfast cereal at various applied air velocities using a number of pipe configurations, taking into account shear histories.

An analysis of political efficacy socialisation among threshold voters in the Republic of Ireland

The spread of democracy in the latter part of the twenty first century has been accompanied by an increasing focus on its perceived performance in established western democracies. Recent literature has expressed concern about a critical outlook among younger cohorts which threatens their political support and engagement. Political efficacy, referring to the feeling of political effectiveness, is considered to be a key indicator of the performance of democratic politics; as it refers to the empowerment of citizens, and relates to their willingness to engage in political matters. The aim of this thesis is to analyse the socialisation of political efficacy among those on the threshold of political adulthood; i.e., 'threshold voters'. The long-term significance of attitudes developed by time of entry to adulthood for political engagement during adulthood has been emphasised in recent literature. By capturing the effect of non-political and political learning among threshold voters, the study advances existing research frames which focus on childhood and early adolescent socialisation. The theoretical and methodological framework applied herein recognises the distinction between internal and external political efficacy, which has not been consistently operationalized in existing research on efficacy socialisation. This research involves a case study of 'threshold voters' in the Republic of Ireland, and employs a quantitative methodology. A study on Irish threshold voters is timely as the parliament and government have recently proposed a lowering of the voting age and an expansion of formal political education to this age group. A project-specific survey instrument was developed and administered to a systematic stratified sample of 1,042 post-primary students in the Cork area. Interpretation of the results of statistical analysis leads to findings on the divergent influence of family, school, associational, and political agents/environments on threshold voter internal and external political efficacy.

Tropospheric aerosol detection over Southern Ireland using a backscatter Raman lidar

Lidar is an optical remote sensing instrument that can measure atmospheric parameters. A Raman lidar instrument (UCLID) was established at University College Cork to contribute to the European lidar network, EARLINET. System performance tests were carried out to ensure strict data quality assurance for submission to the EARLINET database. Procedures include: overlap correction, telecover test, Rayleigh test and zero bin test. Raman backscatter coefficients, extinction coefficients and lidar ratio were measured from April 2010 to May 2011 and February 2012 to June 2012. Statistical analysis of the profiles over these periods provided new information about the typical atmospheric scenarios over Southern Ireland in terms of aerosol load in the lower troposphere, the planetary boundary layer (PBL) height, aerosol optical density (AOD) at 532 nm and lidar ratio values. The arithmetic average of the PBL height was found to be 608 ± 138 m with a median of 615 m, while average AOD at 532 nm for clean marine air masses was 0.119 ± 0.023 and for polluted air masses was 0.170 ± 0.036. The lidar ratio showed a seasonal dependence with lower values found in winter and autumn (20 ± 5 sr) and higher during spring and winter (30 ± 12 sr). Detection of volcanic particles from the eruption of the volcano Eyjafjallajökull in Iceland was measured between 21 April and 7 May 2010. The backscatter coefficient of the ash layer varied between 2.5 Mm-1sr-1 and 3.5 Mm-1sr-1, and estimation of the AOD at 532 nm was found to be between 0.090 and 0.215. Several aerosol loads due to Saharan dust particles were detected in Spring 2011 and 2012. Lidar ratio of the dust layers were determine to be between 45 and 77 sr and AOD at 532 nm during the dust events range between 0.84 to 0.494.

Symptom burden in individuals with inflammatory bowel disease: a mixed methods study

To investigate the symptom burden experiences of individuals with inflammatory bowel disease (IBD). An explanatory sequential mixed methods study was conducted. A cross-sectional, correlational survey was first undertaken. Symptom burden was measured using a modified disease specific version of the Memorial Symptom Assessment Scale, which was administered to a consecutive sample of individuals with IBD (n = 247) at an IBD Outpatients department in one urban teaching hospital in Ireland. Disease activity was determined using clinical disease activity indices, which were completed by the consulting physician. A sequential qualitative, descriptive study was then conducted aimed at explaining noteworthy quantitative findings. A criterion-related purposeful sample of seven participants from the quantitative study was recruited. Semi-structured face to face interviews were conducted using an interview guide and data were analysed using content analysis. Findings revealed that participants experienced a median of 10 symptoms during the last week, however as many as 16 symptoms were experienced during active disease. The most burdensome symptoms were lack of energy, bowel urgency, diarrhoea, feeling bloated, flatulence and worry. Total symptom burden was found to be low with a mean score of 0.56 identified out of a possible range from 0 to 4. Participants with active disease (M = 0.81, SD = 0.48; n = 68) had almost double mean total symptom burden scores than participants with inactive disease (M = 0.46, SD = 0.43; n = 166) (p < 0.001). Mean total psychological symptom burden was found to be significantly greater than mean total physical symptom burden (rho = 0.73, n = 247, p < 0.001). Self-reported disease control, gender, number of flare ups in the last two years, and smoking status was found to be significant predictors of total symptom burden, with self-reported disease control identified as the strongest predictor. Qualitative data revealed tiredness, pain, bowel symptoms, worry and fear as being burdensome. Furthermore, symptom burden experiences were described in terms of its impact on restricting aspects of daily activities, which accumulated into restrictions on general life events. Psychological symptom burden was revealed as more problematic than physical symptom burden due to its constant nature, with physical and psychological symptoms described to occur in a cyclical manner. Participants revealed that disease control was evaluated not only in terms of symptoms, but also in terms of their abilities to control the impact of symptoms on their lives. This study highlights the considerable number of symptoms and the most burdensome symptoms experienced by individuals with IBD, both during active and inactive disease. This study has important implications on symptom assessment in terms of the need to encompass both physical and psychological symptoms. In addition, greater attention needs to be placed on psychological aspects of IBD care.

Survival analysis of adult tuberculosis disease

Background: We conducted a survival analysis of all the confirmed cases of Adult Tuberculosis (TB) patients treated in Cork-City, Ireland. The aim of this study was to estimate Survival time (ST), including median time of survival and to assess the association and impact of covariates (TB risk factors) to event status and ST. The outcome of the survival analysis is reported in this paper. Methods: We used a retrospective cohort study research design to review data of 647 bacteriologically confirmed TB patients from the medical record of two teaching hospitals. Mean age 49 years (Range 18–112). We collected information on potential risk factors of all confirmed cases of TB treated between 2008–2012. For the survival analysis, the outcome of interest was ‘treatment failure’ or ‘death’ (whichever came first). A univariate descriptive statistics analysis was conducted using a non- parametric procedure, Kaplan -Meier (KM) method to estimate overall survival (OS), while the Cox proportional hazard model was used for the multivariate analysis to determine possible association of predictor variables and to obtain adjusted hazard ratio. P value was set at <0.05, log likelihood ratio test at >0.10. Data were analysed using SPSS version 15.0. Results: There was no significant difference in the survival curves of male and female patients. (Log rank statistic = 0.194, df = 1, p = 0.66) and among different age group (Log rank statistic = 1.337, df = 3, p = 0.72). The mean overall survival (OS) was 209 days (95%CI: 92–346) while the median was 51 days (95% CI: 35.7–66). The mean ST for women was 385 days (95%CI: 76.6–694) and for men was 69 days (95%CI: 48.8–88.5). Multivariate Cox regression showed that patient who had history of drug misuse had 2.2 times hazard than those who do not have drug misuse. Smokers and alcohol drinkers had hazard of 1.8 while patients born in country of high endemicity (BICHE) had hazard of 6.3 and HIV co-infection hazard was 1.2. Conclusion: There was no significant difference in survival curves of male and female and among age group. Women had a higher ST compared to men. But men had a higher hazard rate compared to women. Anti-TNF, immunosuppressive medication and diabetes were found to be associated with longer ST, while alcohol, smoking, RICHE, BICHE was associated with shorter ST.

Physical function, psychosocial adaptation, and hardiness post stroke

Introduction: Stroke is a chronic condition that significantly impacts on morbidity and mortality (Balanda et al. 2010). Globally, the complexity of stroke is well documented and more recently, in Ireland, as part of the National Survey of Stroke Survivors (Horgan et al. 2014). There are a number of factors that are known to influence adaptation post stroke. However, there is a lack of research to explain the variability in how survivors adapt post stroke. Hardiness is a broad personality trait that leads to better outcome. This study investigated the influence of hardiness and physical function on psychosocial adaptation post stroke. Methods: A quantitative cross-sectional, correlational, exploratory study was conducted between April and November 2013. The sample consisted of stroke survivors (n=100) who were recruited from three hospital outpatient departments and completed a questionnaire package. Results: The mean age of participants was 76 years (range 70-80), over half (56%) of the participants achieved the maximum score of 20 on the Barthel Index indicating independence in activities of daily living. The median number of days since stroke onset was 91 days (range 74-128). The total mean score and standard deviation for hardiness was 1.89 (0.4) as measured by the Dispositional Resilience Scale, indicating medium hardiness (possible range 0-3). Psychosocial adaptation was measured using the Psychosocial Adjustment to Illness Scale, the total weighted mean and standard deviation was 0.54 (0.3) indicating a satisfactory level of psychosocial adaptation (possible range 0-3). A hierarchical multiple linear regression was performed which contained 6 independent variables (hardiness, living arrangement, and length of hospital stay, number of days since stroke onset, physical function and self-rated recovery). Findings demonstrated that physical function (p<0.001) and hardiness (p=0.008) were significantly related to psychosocial adaptation. Altogether, 65% of the variation in psychosocial adaptation can be explained by the combined effect of the independent variables. Physical functioning had the highest unique contribution (11%) to explain the variance in psychosocial adaptation while self-rated recovery, hardiness, and living arrangements contributed 3% each. Conclusion: This research provides important information regarding factors that influence psychosocial adaptation post stroke at 3 months. Physical function significantly contributed to psychosocial adaptation post stroke. The personality trait of hardiness provides insight into how behaviour influenced adaptation post stroke. While hardiness also had a strong relationship with psychosocial adaptation, further research is necessary to fully comprehend this process.